/* * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #pragma once #include #include #include "esp_err.h" #include "driver/mcpwm_types.h" #ifdef __cplusplus extern "C" { #endif /** * @brief MCPWM capture timer configuration structure */ typedef struct { int group_id; /*!< Specify from which group to allocate the capture timer */ mcpwm_capture_clock_source_t clk_src; /*!< MCPWM capture timer clock source */ uint32_t resolution_hz; /*!< Resolution of capture timer */ } mcpwm_capture_timer_config_t; /** * @brief Create MCPWM capture timer * * @param[in] config MCPWM capture timer configuration * @param[out] ret_cap_timer Returned MCPWM capture timer handle * @return * - ESP_OK: Create MCPWM capture timer successfully * - ESP_ERR_INVALID_ARG: Create MCPWM capture timer failed because of invalid argument * - ESP_ERR_NO_MEM: Create MCPWM capture timer failed because out of memory * - ESP_ERR_NOT_FOUND: Create MCPWM capture timer failed because can't find free resource * - ESP_FAIL: Create MCPWM capture timer failed because of other error */ esp_err_t mcpwm_new_capture_timer(const mcpwm_capture_timer_config_t *config, mcpwm_cap_timer_handle_t *ret_cap_timer); /** * @brief Delete MCPWM capture timer * * @param[in] cap_timer MCPWM capture timer, allocated by `mcpwm_new_capture_timer()` * @return * - ESP_OK: Delete MCPWM capture timer successfully * - ESP_ERR_INVALID_ARG: Delete MCPWM capture timer failed because of invalid argument * - ESP_FAIL: Delete MCPWM capture timer failed because of other error */ esp_err_t mcpwm_del_capture_timer(mcpwm_cap_timer_handle_t cap_timer); /** * @brief Enable MCPWM capture timer * * @param[in] cap_timer MCPWM capture timer handle, allocated by `mcpwm_new_capture_timer()` * @return * - ESP_OK: Enable MCPWM capture timer successfully * - ESP_ERR_INVALID_ARG: Enable MCPWM capture timer failed because of invalid argument * - ESP_ERR_INVALID_STATE: Enable MCPWM capture timer failed because timer is enabled already * - ESP_FAIL: Enable MCPWM capture timer failed because of other error */ esp_err_t mcpwm_capture_timer_enable(mcpwm_cap_timer_handle_t cap_timer); /** * @brief Disable MCPWM capture timer * * @param[in] cap_timer MCPWM capture timer handle, allocated by `mcpwm_new_capture_timer()` * @return * - ESP_OK: Disable MCPWM capture timer successfully * - ESP_ERR_INVALID_ARG: Disable MCPWM capture timer failed because of invalid argument * - ESP_ERR_INVALID_STATE: Disable MCPWM capture timer failed because timer is disabled already * - ESP_FAIL: Disable MCPWM capture timer failed because of other error */ esp_err_t mcpwm_capture_timer_disable(mcpwm_cap_timer_handle_t cap_timer); /** * @brief Start MCPWM capture timer * * @param[in] cap_timer MCPWM capture timer, allocated by `mcpwm_new_capture_timer()` * @return * - ESP_OK: Start MCPWM capture timer successfully * - ESP_ERR_INVALID_ARG: Start MCPWM capture timer failed because of invalid argument * - ESP_FAIL: Start MCPWM capture timer failed because of other error */ esp_err_t mcpwm_capture_timer_start(mcpwm_cap_timer_handle_t cap_timer); /** * @brief Start MCPWM capture timer * * @param[in] cap_timer MCPWM capture timer, allocated by `mcpwm_new_capture_timer()` * @return * - ESP_OK: Stop MCPWM capture timer successfully * - ESP_ERR_INVALID_ARG: Stop MCPWM capture timer failed because of invalid argument * - ESP_FAIL: Stop MCPWM capture timer failed because of other error */ esp_err_t mcpwm_capture_timer_stop(mcpwm_cap_timer_handle_t cap_timer); /** * @brief Get MCPWM capture timer resolution, in Hz * * @param[in] cap_timer MCPWM capture timer, allocated by `mcpwm_new_capture_timer()` * @param[out] out_resolution Returned capture timer resolution, in Hz * @return * - ESP_OK: Get capture timer resolution successfully * - ESP_ERR_INVALID_ARG: Get capture timer resolution failed because of invalid argument * - ESP_FAIL: Get capture timer resolution failed because of other error */ esp_err_t mcpwm_capture_timer_get_resolution(mcpwm_cap_timer_handle_t cap_timer, uint32_t *out_resolution); /** * @brief MCPWM Capture timer sync phase configuration */ typedef struct { mcpwm_sync_handle_t sync_src; /*!< The sync event source */ uint32_t count_value; /*!< The count value that should lock to upon sync event */ mcpwm_timer_direction_t direction; /*!< The count direction that should lock to upon sync event */ } mcpwm_capture_timer_sync_phase_config_t; /** * @brief Set sync phase for MCPWM capture timer * * @param[in] cap_timer MCPWM capture timer, allocated by `mcpwm_new_capture_timer()` * @param[in] config MCPWM capture timer sync phase configuration * @return * - ESP_OK: Set sync phase for MCPWM capture timer successfully * - ESP_ERR_INVALID_ARG: Set sync phase for MCPWM capture timer failed because of invalid argument * - ESP_FAIL: Set sync phase for MCPWM capture timer failed because of other error */ esp_err_t mcpwm_capture_timer_set_phase_on_sync(mcpwm_cap_timer_handle_t cap_timer, const mcpwm_capture_timer_sync_phase_config_t *config); /** * @brief MCPWM capture channel configuration structure */ typedef struct { int gpio_num; /*!< GPIO used capturing input signal */ int intr_priority; /*!< MCPWM capture interrupt priority, if set to 0, the driver will try to allocate an interrupt with a relative low priority (1,2,3) */ uint32_t prescale; /*!< Prescale of input signal, effective frequency = cap_input_clk/prescale */ struct { uint32_t pos_edge: 1; /*!< Whether to capture on positive edge */ uint32_t neg_edge: 1; /*!< Whether to capture on negative edge */ uint32_t pull_up: 1; /*!< Whether to pull up internally */ uint32_t pull_down: 1; /*!< Whether to pull down internally */ uint32_t invert_cap_signal: 1; /*!< Invert the input capture signal */ uint32_t io_loop_back: 1; /*!< For debug/test, the signal output from the GPIO will be fed to the input path as well */ uint32_t keep_io_conf_at_exit: 1; /*!< For debug/test, whether to keep the GPIO configuration when capture channel is deleted. By default, driver will reset the GPIO pin at exit. */ } flags; /*!< Extra configuration flags for capture channel */ } mcpwm_capture_channel_config_t; /** * @brief Create MCPWM capture channel * * @note The created capture channel won't be enabled until calling `mcpwm_capture_channel_enable` * * @param[in] cap_timer MCPWM capture timer, allocated by `mcpwm_new_capture_timer()`, will be connected to the new capture channel * @param[in] config MCPWM capture channel configuration * @param[out] ret_cap_channel Returned MCPWM capture channel * @return * - ESP_OK: Create MCPWM capture channel successfully * - ESP_ERR_INVALID_ARG: Create MCPWM capture channel failed because of invalid argument * - ESP_ERR_NO_MEM: Create MCPWM capture channel failed because out of memory * - ESP_ERR_NOT_FOUND: Create MCPWM capture channel failed because can't find free resource * - ESP_FAIL: Create MCPWM capture channel failed because of other error */ esp_err_t mcpwm_new_capture_channel(mcpwm_cap_timer_handle_t cap_timer, const mcpwm_capture_channel_config_t *config, mcpwm_cap_channel_handle_t *ret_cap_channel); /** * @brief Delete MCPWM capture channel * * @param[in] cap_channel MCPWM capture channel handle, allocated by `mcpwm_new_capture_channel()` * @return * - ESP_OK: Delete MCPWM capture channel successfully * - ESP_ERR_INVALID_ARG: Delete MCPWM capture channel failed because of invalid argument * - ESP_FAIL: Delete MCPWM capture channel failed because of other error */ esp_err_t mcpwm_del_capture_channel(mcpwm_cap_channel_handle_t cap_channel); /** * @brief Enable MCPWM capture channel * * @note This function will transit the channel state from init to enable. * @note This function will enable the interrupt service, if it's lazy installed in `mcpwm_capture_channel_register_event_callbacks()`. * * @param[in] cap_channel MCPWM capture channel handle, allocated by `mcpwm_new_capture_channel()` * @return * - ESP_OK: Enable MCPWM capture channel successfully * - ESP_ERR_INVALID_ARG: Enable MCPWM capture channel failed because of invalid argument * - ESP_ERR_INVALID_STATE: Enable MCPWM capture channel failed because the channel is already enabled * - ESP_FAIL: Enable MCPWM capture channel failed because of other error */ esp_err_t mcpwm_capture_channel_enable(mcpwm_cap_channel_handle_t cap_channel); /** * @brief Disable MCPWM capture channel * * @param[in] cap_channel MCPWM capture channel handle, allocated by `mcpwm_new_capture_channel()` * @return * - ESP_OK: Disable MCPWM capture channel successfully * - ESP_ERR_INVALID_ARG: Disable MCPWM capture channel failed because of invalid argument * - ESP_ERR_INVALID_STATE: Disable MCPWM capture channel failed because the channel is not enabled yet * - ESP_FAIL: Disable MCPWM capture channel failed because of other error */ esp_err_t mcpwm_capture_channel_disable(mcpwm_cap_channel_handle_t cap_channel); /** * @brief Group of supported MCPWM capture event callbacks * @note The callbacks are all running under ISR environment */ typedef struct { mcpwm_capture_event_cb_t on_cap; /*!< Callback function that would be invoked when capture event occurred */ } mcpwm_capture_event_callbacks_t; /** * @brief Set event callbacks for MCPWM capture channel * * @note The first call to this function needs to be before the call to `mcpwm_capture_channel_enable` * @note User can deregister a previously registered callback by calling this function and setting the callback member in the `cbs` structure to NULL. * * @param[in] cap_channel MCPWM capture channel handle, allocated by `mcpwm_new_capture_channel()` * @param[in] cbs Group of callback functions * @param[in] user_data User data, which will be passed to callback functions directly * @return * - ESP_OK: Set event callbacks successfully * - ESP_ERR_INVALID_ARG: Set event callbacks failed because of invalid argument * - ESP_ERR_INVALID_STATE: Set event callbacks failed because the channel is not in init state * - ESP_FAIL: Set event callbacks failed because of other error */ esp_err_t mcpwm_capture_channel_register_event_callbacks(mcpwm_cap_channel_handle_t cap_channel, const mcpwm_capture_event_callbacks_t *cbs, void *user_data); /** * @brief Trigger a catch by software * * @param[in] cap_channel MCPWM capture channel handle, allocated by `mcpwm_new_capture_channel()` * @return * - ESP_OK: Trigger software catch successfully * - ESP_ERR_INVALID_ARG: Trigger software catch failed because of invalid argument * - ESP_ERR_INVALID_STATE: Trigger software catch failed because the channel is not enabled yet * - ESP_FAIL: Trigger software catch failed because of other error */ esp_err_t mcpwm_capture_channel_trigger_soft_catch(mcpwm_cap_channel_handle_t cap_channel); #ifdef __cplusplus } #endif