/* LCD tjpgd example This example code is in the Public Domain (or CC0 licensed, at your option.) Unless required by applicable law or agreed to in writing, this software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */ #include #include "freertos/FreeRTOS.h" #include "freertos/task.h" #include "esp_lcd_panel_io.h" #include "esp_lcd_panel_vendor.h" #include "esp_lcd_panel_ops.h" #include "esp_heap_caps.h" #include "driver/spi_master.h" #include "driver/gpio.h" #include "pretty_effect.h" // Using SPI2 in the example, as it aslo supports octal modes on some targets #define LCD_HOST SPI2_HOST // To speed up transfers, every SPI transfer sends a bunch of lines. This define specifies how many. // More means more memory use, but less overhead for setting up / finishing transfers. Make sure 240 // is dividable by this. #define PARALLEL_LINES 16 // The number of frames to show before rotate the graph #define ROTATE_FRAME 30 //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////// Please update the following configuration according to your LCD spec ////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// #define EXAMPLE_LCD_PIXEL_CLOCK_HZ (10 * 1000 * 1000) #define EXAMPLE_LCD_BK_LIGHT_ON_LEVEL 0 #define EXAMPLE_LCD_BK_LIGHT_OFF_LEVEL !EXAMPLE_LCD_BK_LIGHT_ON_LEVEL #define EXAMPLE_PIN_NUM_DATA0 23 /*!< for 1-line SPI, this also refered as MOSI */ #define EXAMPLE_PIN_NUM_PCLK 19 #define EXAMPLE_PIN_NUM_CS 22 #define EXAMPLE_PIN_NUM_DC 21 #define EXAMPLE_PIN_NUM_RST 18 #define EXAMPLE_PIN_NUM_BK_LIGHT 5 // The pixel number in horizontal and vertical #define EXAMPLE_LCD_H_RES 320 #define EXAMPLE_LCD_V_RES 240 // Bit number used to represent command and parameter #define EXAMPLE_LCD_CMD_BITS 8 #define EXAMPLE_LCD_PARAM_BITS 8 #if CONFIG_EXAMPLE_LCD_SPI_8_LINE_MODE #define EXAMPLE_PIN_NUM_DATA1 7 #define EXAMPLE_PIN_NUM_DATA2 8 #define EXAMPLE_PIN_NUM_DATA3 9 #define EXAMPLE_PIN_NUM_DATA4 10 #define EXAMPLE_PIN_NUM_DATA5 11 #define EXAMPLE_PIN_NUM_DATA6 12 #define EXAMPLE_PIN_NUM_DATA7 13 #endif // CONFIG_EXAMPLE_LCD_SPI_8_LINE_MODE // Simple routine to generate some patterns and send them to the LCD. Because the // SPI driver handles transactions in the background, we can calculate the next line // while the previous one is being sent. static uint16_t *s_lines[2]; static void display_pretty_colors(esp_lcd_panel_handle_t panel_handle) { int frame = 0; // Indexes of the line currently being sent to the LCD and the line we're calculating int sending_line = 0; int calc_line = 0; // After ROTATE_FRAME frames, the image will be rotated while (frame <= ROTATE_FRAME) { frame++; for (int y = 0; y < EXAMPLE_LCD_V_RES; y += PARALLEL_LINES) { // Calculate a line pretty_effect_calc_lines(s_lines[calc_line], y, frame, PARALLEL_LINES); sending_line = calc_line; calc_line = !calc_line; // Send the calculated data esp_lcd_panel_draw_bitmap(panel_handle, 0, y, 0 + EXAMPLE_LCD_H_RES, y + PARALLEL_LINES, s_lines[sending_line]); } } } void app_main(void) { gpio_config_t bk_gpio_config = { .mode = GPIO_MODE_OUTPUT, .pin_bit_mask = 1ULL << EXAMPLE_PIN_NUM_BK_LIGHT }; // Initialize the GPIO of backlight ESP_ERROR_CHECK(gpio_config(&bk_gpio_config)); spi_bus_config_t buscfg = { .sclk_io_num = EXAMPLE_PIN_NUM_PCLK, .mosi_io_num = EXAMPLE_PIN_NUM_DATA0, .miso_io_num = -1, .quadwp_io_num = -1, .quadhd_io_num = -1, .max_transfer_sz = PARALLEL_LINES * EXAMPLE_LCD_H_RES * 2 + 8 }; #if CONFIG_EXAMPLE_LCD_SPI_8_LINE_MODE buscfg.data1_io_num = EXAMPLE_PIN_NUM_DATA1; buscfg.data2_io_num = EXAMPLE_PIN_NUM_DATA2; buscfg.data3_io_num = EXAMPLE_PIN_NUM_DATA3; buscfg.data4_io_num = EXAMPLE_PIN_NUM_DATA4; buscfg.data5_io_num = EXAMPLE_PIN_NUM_DATA5; buscfg.data6_io_num = EXAMPLE_PIN_NUM_DATA6; buscfg.data7_io_num = EXAMPLE_PIN_NUM_DATA7; buscfg.flags = SPICOMMON_BUSFLAG_OCTAL; #endif // Initialize the SPI bus ESP_ERROR_CHECK(spi_bus_initialize(LCD_HOST, &buscfg, SPI_DMA_CH_AUTO)); esp_lcd_panel_io_handle_t io_handle = NULL; esp_lcd_panel_io_spi_config_t io_config = { .dc_gpio_num = EXAMPLE_PIN_NUM_DC, .cs_gpio_num = EXAMPLE_PIN_NUM_CS, .pclk_hz = EXAMPLE_LCD_PIXEL_CLOCK_HZ, .lcd_cmd_bits = EXAMPLE_LCD_CMD_BITS, .lcd_param_bits = EXAMPLE_LCD_PARAM_BITS, .spi_mode = 0, .trans_queue_depth = 10, }; #if CONFIG_EXAMPLE_LCD_SPI_8_LINE_MODE io_config.spi_mode = 3; // using mode 3 to simulate Intel 8080 timing io_config.flags.octal_mode = 1; #endif // Attach the LCD to the SPI bus ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)LCD_HOST, &io_config, &io_handle)); esp_lcd_panel_handle_t panel_handle = NULL; esp_lcd_panel_dev_config_t panel_config = { .reset_gpio_num = EXAMPLE_PIN_NUM_RST, .color_space = ESP_LCD_COLOR_SPACE_BGR, .bits_per_pixel = 16, }; // Initialize the LCD configuration ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(io_handle, &panel_config, &panel_handle)); // Turn off backlight to avoid unpredictable display on the LCD screen while initializing // the LCD panel driver. (Different LCD screens may need different levels) ESP_ERROR_CHECK(gpio_set_level(EXAMPLE_PIN_NUM_BK_LIGHT, EXAMPLE_LCD_BK_LIGHT_OFF_LEVEL)); // Reset the display ESP_ERROR_CHECK(esp_lcd_panel_reset(panel_handle)); // Initialize LCD panel ESP_ERROR_CHECK(esp_lcd_panel_init(panel_handle)); // Swap x and y axis (Different LCD screens may need different options) ESP_ERROR_CHECK(esp_lcd_panel_swap_xy(panel_handle, true)); // Turn on backlight (Different LCD screens may need different levels) ESP_ERROR_CHECK(gpio_set_level(EXAMPLE_PIN_NUM_BK_LIGHT, EXAMPLE_LCD_BK_LIGHT_ON_LEVEL)); // Initialize the effect displayed ESP_ERROR_CHECK(pretty_effect_init()); // "Rotate or not" flag bool is_rotated = false; // Allocate memory for the pixel buffers for (int i = 0; i < 2; i++) { s_lines[i] = heap_caps_malloc(EXAMPLE_LCD_H_RES * PARALLEL_LINES * sizeof(uint16_t), MALLOC_CAP_DMA); assert(s_lines[i] != NULL); } // Start and rotate while (1) { // Set driver configuration to rotate 180 degrees each time ESP_ERROR_CHECK(esp_lcd_panel_mirror(panel_handle, is_rotated, is_rotated)); // Display display_pretty_colors(panel_handle); is_rotated = !is_rotated; } }