menu "Example Configuration" config EXAMPLE_TOUCH_WAKEUP bool "Enable touch wake up" default y depends on SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP help This option enables wake up from deep sleep using touch pads. ESP32 - TOUCH8 and TOUCH9, which correspond to GPIO33 and GPIO32. ESP32S2/S3 - TOUCH9, which corresponds to GPIO9. Note: On ESP32, touch wakeup source can not be used together with ext0 wakeup source. config EXAMPLE_EXT0_WAKEUP bool "Enable wakeup from GPIO (ext0)" default y if !IDF_TARGET_ESP32 default n if IDF_TARGET_ESP32 depends on SOC_PM_SUPPORT_EXT0_WAKEUP help This option enables wake up from deep sleep from GPIO25(ESP32)/GPIO3(ESP32S2,S3). The pin should be connected to LOW to avoid being in a floating state. When triggering a wake up, connect the pin to HIGH. Note that floating pins may trigger a wake up. Note: On ESP32, ext0 wakeup source can not be used together with touch wakeup source. config EXAMPLE_EXT1_WAKEUP bool "Enable wakeup from GPIO (ext1)" default y depends on SOC_PM_SUPPORT_EXT1_WAKEUP help This option enables wake up from deep sleep from GPIO2 and GPIO4. They should be connected to LOW to avoid floating pins. When triggering a wake up, connect one or both of the pins to HIGH. Note that floating pins may trigger a wake up. menu "EXT1 wakeup configuration" visible if EXAMPLE_EXT1_WAKEUP config EXAMPLE_EXT1_WAKEUP_PIN_1 int "Enable wakeup from PIN_1" depends on !IDF_TARGET_ESP32 default 2 if !IDF_TARGET_ESP32H2 default 10 if IDF_TARGET_ESP32H2 range 0 7 if IDF_TARGET_ESP32C6 range 7 14 if IDF_TARGET_ESP32H2 range 0 21 if IDF_TARGET_ESP32S2 range 0 21 if IDF_TARGET_ESP32S3 choice EXAMPLE_EXT1_WAKEUP_PIN_1_SEL prompt "Enable wakeup from PIN_1" default EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_2 depends on IDF_TARGET_ESP32 config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_0 bool "GPIO 0" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_2 bool "GPIO 2" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_4 bool "GPIO 4" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_12 bool "GPIO 12" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_13 bool "GPIO 13" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_14 bool "GPIO 14" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_15 bool "GPIO 15" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_25 bool "GPIO 25" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_26 bool "GPIO 26" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_27 bool "GPIO 27" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_32 bool "GPIO 32" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_33 bool "GPIO 33" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_34 bool "GPIO 34" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_35 bool "GPIO 35" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_36 bool "GPIO 36" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_37 bool "GPIO 37" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_38 bool "GPIO 38" config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_39 bool "GPIO 39" endchoice config EXAMPLE_EXT1_WAKEUP_PIN_1 int depends on IDF_TARGET_ESP32 default 0 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_0 default 2 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_2 default 4 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_4 default 12 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_12 default 13 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_13 default 14 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_14 default 15 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_15 default 25 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_25 default 26 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_26 default 27 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_27 default 32 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_32 default 33 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_33 default 34 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_34 default 35 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_35 default 36 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_36 default 37 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_37 default 38 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_38 default 39 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_39 config EXAMPLE_EXT1_WAKEUP_PIN_2 int "Enable wakeup from PIN_2" depends on !IDF_TARGET_ESP32 default 4 if !IDF_TARGET_ESP32H2 default 11 if IDF_TARGET_ESP32H2 range 0 7 if IDF_TARGET_ESP32C6 range 7 14 if IDF_TARGET_ESP32H2 range 0 21 if IDF_TARGET_ESP32S2 range 0 21 if IDF_TARGET_ESP32S3 choice EXAMPLE_EXT1_WAKEUP_PIN_2_SEL prompt "Enable wakeup from PIN_2" default EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_4 depends on IDF_TARGET_ESP32 config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_0 bool "GPIO 0" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_2 bool "GPIO 2" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_4 bool "GPIO 4" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_12 bool "GPIO 12" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_13 bool "GPIO 13" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_14 bool "GPIO 14" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_15 bool "GPIO 15" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_25 bool "GPIO 25" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_26 bool "GPIO 26" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_27 bool "GPIO 27" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_32 bool "GPIO 32" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_33 bool "GPIO 33" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_34 bool "GPIO 34" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_35 bool "GPIO 35" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_36 bool "GPIO 36" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_37 bool "GPIO 37" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_38 bool "GPIO 38" config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_39 bool "GPIO 39" endchoice config EXAMPLE_EXT1_WAKEUP_PIN_2 int depends on IDF_TARGET_ESP32 default 0 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_0 default 2 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_2 default 4 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_4 default 12 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_12 default 13 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_13 default 14 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_14 default 15 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_15 default 25 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_25 default 26 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_26 default 27 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_27 default 32 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_32 default 33 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_33 default 34 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_34 default 35 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_35 default 36 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_36 default 37 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_37 default 38 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_38 default 39 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_39 choice EXAMPLE_EXT1_WAKEUP_MODE_SEL prompt "Select wakeup mode from EXT1" default ESP_EXT1_WAKEUP_ANY_HIGH config ESP_EXT1_WAKEUP_ANY_LOW bool "GPIO any low level" depends on !IDF_TARGET_ESP32 config ESP_EXT1_WAKEUP_ALL_LOW bool "GPIO all low level" depends on IDF_TARGET_ESP32 config ESP_EXT1_WAKEUP_ANY_HIGH bool "GPIO any high level" endchoice config EXAMPLE_EXT1_WAKEUP_MODE int default 0 if ESP_EXT1_WAKEUP_ANY_LOW default 0 if ESP_EXT1_WAKEUP_ALL_LOW default 1 if ESP_EXT1_WAKEUP_ANY_HIGH config EXAMPLE_EXT1_USE_INTERNAL_PULLUPS bool "Use internal pull-up/downs for EXT1 wakeup source" default n depends on EXAMPLE_EXT1_WAKEUP help When using EXT1 wakeup source without external pull-up/downs, you may want to make use of the internal ones. if we turn off the RTC_PERIPH domain or if certain chips lack the RTC_PERIPH domain, we will use the HOLD feature to maintain the pull-up and pull-down on the pins during sleep. but if we turn on the RTC_PERIPH domain, we don not need to use HOLD feature and this will increase some power comsumption. EXT0 wakeup source resides in the same power domain as RTCIO (RTC Periph), so internal pull-up/downs are always available. There's no need to explicitly force it on for EXT0. endmenu config EXAMPLE_GPIO_WAKEUP bool "Enable wakeup from GPIO" default y depends on SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP help This option enables wake up from GPIO. Be aware that if you use low level to trigger wakeup, we strongly recommand you to connect external pull-up resistance. menu "GPIO wakeup configuration" visible if EXAMPLE_GPIO_WAKEUP config EXAMPLE_GPIO_WAKEUP_PIN int "Enable wakeup from GPIO" default 0 range 0 7 if IDF_TARGET_ESP32C6 range 0 5 if !IDF_TARGET_ESP32C6 config EXAMPLE_GPIO_WAKEUP_HIGH_LEVEL bool "Enable GPIO high-level wakeup" default y help This option set the gpio wake-up trigger signal, In deep sleep, only high or low level wake-up is supported. If this option is enabled, it is a high level wake up, otherwise it is a low level wake up. endmenu endmenu