// Copyright 2016 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #ifndef PHY_INIT_DATA_H #define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */ #include "esp_phy_init.h" #include "sdkconfig.h" #ifdef __cplusplus extern "C" { #endif // constrain a value between 'low' and 'high', inclusive #define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val) #define PHY_INIT_MAGIC "PHYINIT" // define the lowest tx power as LOWEST_PHY_TX_POWER #define PHY_TX_POWER_LOWEST LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 52) #define PHY_TX_POWER_OFFSET 2 #define PHY_TX_POWER_NUM 14 #if CONFIG_ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN #define PHY_CRC_ALGORITHM 1 #define PHY_COUNTRY_CODE_LEN 2 #define PHY_INIT_DATA_TYPE_OFFSET 126 #define PHY_SUPPORT_MULTIPLE_BIN_OFFSET 125 #endif static const char phy_init_magic_pre[] = PHY_INIT_MAGIC; /** * @brief Structure containing default recommended PHY initialization parameters. */ static const esp_phy_init_data_t phy_init_data= { { 0x80, 0x00, LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x4E), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x4E), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x48), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x48), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x48), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x48), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x48), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x48), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x44), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x44), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x48), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x48), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x44), LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 0x42), 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0xf1 } }; static const char phy_init_magic_post[] = PHY_INIT_MAGIC; #if CONFIG_ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN /** * @brief PHY init data control infomation structure */ typedef struct { uint8_t control_info_checksum[4]; /*!< 4-byte control infomation checksum */ uint8_t multiple_bin_checksum[4]; /*!< 4-byte multiple bin checksum */ uint8_t check_algorithm; /*!< check algorithm */ uint8_t version; /*!< PHY init data bin version */ uint8_t number; /*!< PHY init data bin number */ uint8_t length[2]; /*!< Length of each PHY init data bin */ uint8_t reserved[19]; /*!< 19-byte reserved */ } __attribute__ ((packed)) phy_control_info_data_t; /** * @brief Country corresponds to PHY init data type structure */ typedef struct { char cc[PHY_COUNTRY_CODE_LEN]; uint8_t type; } phy_country_to_bin_type_t; #endif #ifdef __cplusplus } #endif #endif /* PHY_INIT_DATA_H */