/* * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #pragma once #include "esp_flash.h" #include "esp_attr.h" struct esp_flash_t; typedef struct esp_flash_t esp_flash_t; typedef struct spi_flash_chip_t spi_flash_chip_t; /** Timeout configurations for flash operations, all in us */ typedef struct { uint32_t idle_timeout; ///< Default timeout for other commands to be sent by host and get done by flash uint32_t chip_erase_timeout; ///< Timeout for chip erase operation uint32_t block_erase_timeout; ///< Timeout for block erase operation uint32_t sector_erase_timeout; ///< Timeout for sector erase operation uint32_t page_program_timeout; ///< Timeout for page program operation } flash_chip_op_timeout_t; typedef enum { SPI_FLASH_REG_STATUS = 1, } spi_flash_register_t; typedef enum { SPI_FLASH_CHIP_CAP_SUSPEND = BIT(0), ///< Flash chip support suspend feature. SPI_FLASH_CHIP_CAP_32MB_SUPPORT = BIT(1), ///< Flash chip driver support flash size larger than 32M Bytes. SPI_FLASH_CHIP_CAP_UNIQUE_ID = BIT(2), ///< Flash chip driver support read the flash unique id. } spi_flash_caps_t; /** @brief SPI flash chip driver definition structure. * * The chip driver structure contains chip-specific pointers to functions to perform SPI flash operations, and some * chip-specific numeric values. * * @note This is not a public API. These functions are called from the public API (declared in * esp_flash.h). They assume the caller has already validated arguments and enabled relevant protections * (disabling flash cache, prevent concurrent SPI access, etc.) * * Do not call chip driver functions directly in other contexts. * * A generic driver for generic chips and its related operations are defined in * spi_flash_chip_generic.h which can be used as building blocks for written * new/specific SPI flash chip drivers. * * @note All of these functions may be called with SPI flash cache disabled, so must only ever access IRAM/DRAM/ROM. */ struct spi_flash_chip_t { const char *name; ///< Name of the chip driver const flash_chip_op_timeout_t *timeout; ///< Timeout configuration for this chip /* Probe to detect if a supported SPI flash chip is found. * * Attempts to configure 'chip' with these operations and probes for a matching SPI flash chip. * * Auto-detection of a SPI flash chip calls this function in turn on each registered driver (see esp_flash_registered_flash_drivers). * * ID - as read by spi_flash_generic_read_id() - is supplied so each probe * function doesn't need to unnecessarily read ID, but probe is permitted * to interrogate flash in any non-destructive way. * * It is permissible for the driver to modify the 'chip' structure if probing succeeds (specifically, to assign something to the * driver_data pointer if that is useful for the driver.) * * @return ESP_OK if probing was successful, an error otherwise. Driver may * assume that returning ESP_OK means it has claimed this chip. */ esp_err_t (*probe)(esp_flash_t *chip, uint32_t flash_id); esp_err_t (*reset)(esp_flash_t *chip); /* Detect SPI flash size * * Interrogate the chip to detect its size. */ esp_err_t (*detect_size)(esp_flash_t *chip, uint32_t *size); /* Erase the entire chip Caller has verified the chip is not write protected. */ esp_err_t (*erase_chip)(esp_flash_t *chip); /* Erase a sector of the chip. Sector size is specified in the 'sector_size' field. sector_address is an offset in bytes. Caller has verified that this sector should be non-write-protected. */ esp_err_t (*erase_sector)(esp_flash_t *chip, uint32_t sector_address); /* Erase a multi-sector block of the chip. Block size is specified in the 'block_erase_size' field. sector_address is an offset in bytes. Caller has verified that this block should be non-write-protected. */ esp_err_t (*erase_block)(esp_flash_t *chip, uint32_t block_address); uint32_t sector_size; /* Sector is minimum erase size */ uint32_t block_erase_size; /* Optimal (fastest) block size for multi-sector erases on this chip */ /* Read the write protect status of the entire chip. */ esp_err_t (*get_chip_write_protect)(esp_flash_t *chip, bool *out_write_protected); /* Set the write protect status of the entire chip. */ esp_err_t (*set_chip_write_protect)(esp_flash_t *chip, bool chip_write_protect); /* Number of individually write protectable regions on this chip. Range 0-63. */ uint8_t num_protectable_regions; /* Pointer to an array describing each protectable region. Should have num_protectable_regions elements. */ const esp_flash_region_t *protectable_regions; /* Get a bitmask describing all protectable regions on the chip. Each bit represents one entry in the protectable_regions array, ie bit (1<drv->set_read_mode(chip) in order to configure the chip's read mode correctly. */ esp_err_t (*read)(esp_flash_t *chip, void *buffer, uint32_t address, uint32_t length); /* Write any amount of data to the chip. */ esp_err_t (*write)(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length); /* Use the page program command to write data to the chip. * * This function is expected to be called by chip->drv->write (if the * chip->drv->write implementation doesn't call it then it can be left as NULL.) * * - The length argument supplied to this function is at most 'page_size' bytes. * * - The region between 'address' and 'address + length' will not cross a page_size aligned boundary (the write * implementation is expected to split such a write into two before calling page_program.) */ esp_err_t (*program_page)(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length); /* Page size as written by the page_program function. Usually 256 bytes. */ uint32_t page_size; /* Perform an encrypted write to the chip, using internal flash encryption hardware. */ esp_err_t (*write_encrypted)(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length); /* Wait for the SPI flash chip to be idle (any write operation to be complete.) This function is both called from the higher-level API functions, and from other functions in this structure. timeout_ms should be a timeout (in milliseconds) before the function returns ESP_ERR_TIMEOUT. This is useful to avoid hanging if the chip is otherwise unresponsive (ie returns all 0xFF or similar.) */ esp_err_t (*wait_idle)(esp_flash_t *chip, uint32_t timeout_us); /* Configure both the SPI host and the chip for the read mode specified in chip->read_mode. * * This function is called by the higher-level API before the 'read' function is called. * * Can return ESP_ERR_FLASH_UNSUPPORTED_HOST or ESP_ERR_FLASH_UNSUPPORTED_CHIP if the specified mode is unsupported. */ esp_err_t (*set_io_mode)(esp_flash_t *chip); /* * Get whether the Quad Enable (QE) is set. (*out_io_mode)=SPI_FLASH_QOUT if * enabled, otherwise disabled */ esp_err_t (*get_io_mode)(esp_flash_t *chip, esp_flash_io_mode_t* out_io_mode); /* * Read the chip ID. Called when chip driver is set, but we want to know the exact chip id (to * get the size, etc.). */ esp_err_t (*read_id)(esp_flash_t *chip, uint32_t* out_chip_id); /* * Read the requested register (status, etc.). */ esp_err_t (*read_reg)(esp_flash_t *chip, spi_flash_register_t reg_id, uint32_t* out_reg); /** Yield to other tasks. Called during erase operations. */ esp_err_t (*yield)(esp_flash_t *chip, uint32_t wip); /** Setup flash suspend configuration. */ esp_err_t (*sus_setup)(esp_flash_t *chip); /** * Read the chip unique ID. */ esp_err_t (*read_unique_id)(esp_flash_t *chip, uint64_t* flash_unique_id); /** * Get the capabilities of the flash chip. See SPI_FLASH_CHIP_CAP_* macros as reference. */ spi_flash_caps_t (*get_chip_caps)(esp_flash_t *chip); /** * Configure the host registers to use the specified read mode set in the ``chip->read_mode``. */ esp_err_t (*config_host_io_mode)(esp_flash_t *chip, uint32_t flags); }; /* Pointer to an array of pointers to all known drivers for flash chips. This array is used by esp_flash_init() to detect the flash chip driver, if none is supplied by the caller. Array is terminated with a NULL pointer. This pointer can be overwritten with a pointer to a new array, to update the list of known flash chips. */ extern const spi_flash_chip_t **esp_flash_registered_chips;