#include <stdio.h>
#include <sys/param.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/semphr.h>

#include <unity.h>
#include <esp_spi_flash.h>
#include <esp_attr.h>
#include "driver/timer.h"
#include "esp_intr_alloc.h"
#include "test_utils.h"
#include "ccomp_timer.h"
#include "esp_log.h"
#include "esp_rom_sys.h"
#include "esp_timer.h"

#include "bootloader_flash.h"   //for bootloader_flash_xmc_startup

#include "sdkconfig.h"
#if CONFIG_IDF_TARGET_ESP32
#include "esp32/rom/spi_flash.h"
#elif CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/rom/spi_flash.h"
#elif CONFIG_IDF_TARGET_ESP32S3
#include "esp32s3/rom/spi_flash.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/spi_flash.h"
#endif

struct flash_test_ctx {
    uint32_t offset;
    bool fail;
    SemaphoreHandle_t done;
};

/* Base offset in flash for tests. */
static size_t start;

static void setup_tests(void)
{
    if (start == 0) {
        const esp_partition_t *part = get_test_data_partition();
        start = part->address;
        printf("Test data partition @ 0x%x\n", start);
    }
}

static void flash_test_task(void *arg)
{
    struct flash_test_ctx *ctx = (struct flash_test_ctx *) arg;
    vTaskDelay(100 / portTICK_PERIOD_MS);
    const uint32_t sector = start / SPI_FLASH_SEC_SIZE + ctx->offset;
    printf("t%d\n", sector);
    printf("es%d\n", sector);
    if (spi_flash_erase_sector(sector) != ESP_OK) {
        ctx->fail = true;
        printf("Erase failed\r\n");
        xSemaphoreGive(ctx->done);
        vTaskDelete(NULL);
    }
    printf("ed%d\n", sector);

    vTaskDelay(0 / portTICK_PERIOD_MS);

    uint32_t val = 0xabcd1234;
    for (uint32_t offset = 0; offset < SPI_FLASH_SEC_SIZE; offset += 4) {
        if (spi_flash_write(sector * SPI_FLASH_SEC_SIZE + offset, (const uint8_t *) &val, 4) != ESP_OK) {
            printf("Write failed at offset=%d\r\n", offset);
            ctx->fail = true;
            break;
        }
    }
    printf("wd%d\n", sector);

    vTaskDelay(0 / portTICK_PERIOD_MS);

    uint32_t val_read;
    for (uint32_t offset = 0; offset < SPI_FLASH_SEC_SIZE; offset += 4) {
        if (spi_flash_read(sector * SPI_FLASH_SEC_SIZE + offset, (uint8_t *) &val_read, 4) != ESP_OK) {
            printf("Read failed at offset=%d\r\n", offset);
            ctx->fail = true;
            break;
        }
        if (val_read != val) {
            printf("Read invalid value=%08x at offset=%d\r\n", val_read, offset);
            ctx->fail = true;
            break;
        }
    }
    printf("td%d\n", sector);
    xSemaphoreGive(ctx->done);
    vTaskDelete(NULL);
}

TEST_CASE("flash write and erase work both on PRO CPU and on APP CPU", "[spi_flash][ignore]")
{
    setup_tests();

    SemaphoreHandle_t done = xSemaphoreCreateCounting(4, 0);
    struct flash_test_ctx ctx[] = {
            { .offset = 0x10 + 6, .done = done },
            { .offset = 0x10 + 7, .done = done },
            { .offset = 0x10 + 8, .done = done },
#ifndef CONFIG_FREERTOS_UNICORE
            { .offset = 0x10 + 9, .done = done }
#endif
    };

    xTaskCreatePinnedToCore(flash_test_task, "t0", 2048, &ctx[0], 3, NULL, 0);
    xTaskCreatePinnedToCore(flash_test_task, "t1", 2048, &ctx[1], 3, NULL, tskNO_AFFINITY);
    xTaskCreatePinnedToCore(flash_test_task, "t2", 2048, &ctx[2], 3, NULL, tskNO_AFFINITY);
#ifndef CONFIG_FREERTOS_UNICORE
    xTaskCreatePinnedToCore(flash_test_task, "t3", 2048, &ctx[3], 3, NULL, 1);
#endif

    const size_t task_count = sizeof(ctx)/sizeof(ctx[0]);
    for (int i = 0; i < task_count; ++i) {
        xSemaphoreTake(done, portMAX_DELAY);
        TEST_ASSERT_FALSE(ctx[i].fail);
    }
    vSemaphoreDelete(done);
}



typedef struct {
    size_t buf_size;
    uint8_t* buf;
    size_t flash_addr;
    size_t repeat_count;
    SemaphoreHandle_t done;
} read_task_arg_t;


typedef struct {
    size_t delay_time_us;
    size_t repeat_count;
} block_task_arg_t;

#ifdef CONFIG_IDF_TARGET_ESP32S2
#define int_clr_timers int_clr
#endif

static void IRAM_ATTR timer_isr(void* varg) {
    block_task_arg_t* arg = (block_task_arg_t*) varg;
    timer_group_clr_intr_status_in_isr(TIMER_GROUP_0, TIMER_0);
    timer_group_enable_alarm_in_isr(TIMER_GROUP_0, TIMER_0);
    esp_rom_delay_us(arg->delay_time_us);
    arg->repeat_count++;
}

static void read_task(void* varg) {
    read_task_arg_t* arg = (read_task_arg_t*) varg;
    for (size_t i = 0; i < arg->repeat_count; ++i) {
        ESP_ERROR_CHECK( spi_flash_read(arg->flash_addr, arg->buf, arg->buf_size) );
    }
    xSemaphoreGive(arg->done);
    vTaskDelay(1);
    vTaskDelete(NULL);
}

TEST_CASE("spi flash functions can run along with IRAM interrupts", "[spi_flash][esp_flash]")
{
    const size_t size = 128;
    read_task_arg_t read_arg = {
            .buf_size = size,
            .buf = (uint8_t*) malloc(size),
            .flash_addr = 0,
            .repeat_count = 1000,
            .done = xSemaphoreCreateBinary()
    };

    timer_config_t config = {
            .alarm_en = true,
            .counter_en = false,
            .intr_type = TIMER_INTR_LEVEL,
            .counter_dir = TIMER_COUNT_UP,
            .auto_reload = true,
            .divider = 80
    };

    block_task_arg_t block_arg = {
            .repeat_count = 0,
            .delay_time_us = 100
    };

    ESP_ERROR_CHECK( timer_init(TIMER_GROUP_0, TIMER_0, &config) );
    timer_pause(TIMER_GROUP_0, TIMER_0);
    ESP_ERROR_CHECK( timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, 120) );
    intr_handle_t handle;
    ESP_ERROR_CHECK( timer_isr_register(TIMER_GROUP_0, TIMER_0, &timer_isr, &block_arg, ESP_INTR_FLAG_IRAM, &handle) );
    timer_set_counter_value(TIMER_GROUP_0, TIMER_0, 0);
    timer_enable_intr(TIMER_GROUP_0, TIMER_0);
    timer_start(TIMER_GROUP_0, TIMER_0);

    xTaskCreatePinnedToCore(read_task, "r", 2048, &read_arg, 3, NULL, portNUM_PROCESSORS - 1);
    xSemaphoreTake(read_arg.done, portMAX_DELAY);

    timer_pause(TIMER_GROUP_0, TIMER_0);
    timer_disable_intr(TIMER_GROUP_0, TIMER_0);
    esp_intr_free(handle);
    vSemaphoreDelete(read_arg.done);
    free(read_arg.buf);
}

#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3)
// TODO ESP32-S3 IDF-2021

static const char TAG[] = "test_spi_flash";

typedef struct {
    uint32_t us_start;
    size_t len;
    const char* name;
} time_meas_ctx_t;

static void time_measure_start(time_meas_ctx_t* ctx)
{
    ctx->us_start = esp_timer_get_time();
    ccomp_timer_start();
}

static uint32_t time_measure_end(time_meas_ctx_t* ctx)
{
    uint32_t c_time_us = ccomp_timer_stop();
    uint32_t time_us = esp_timer_get_time() - ctx->us_start;

    ESP_LOGI(TAG, "%s: compensated: %.2lf kB/s, typical: %.2lf kB/s", ctx->name, ctx->len / (c_time_us/1000.), ctx->len / (time_us/1000.));
    return ctx->len * 1000 / (c_time_us / 1000);
}

#define TEST_TIMES      20
#define TEST_SECTORS    4

static uint32_t measure_erase(const esp_partition_t* part)
{
    const int total_len = SPI_FLASH_SEC_SIZE * TEST_SECTORS;
    time_meas_ctx_t time_ctx = {.name = "erase", .len = total_len};

    time_measure_start(&time_ctx);
    esp_err_t err = spi_flash_erase_range(part->address, total_len);
    TEST_ESP_OK(err);
    return time_measure_end(&time_ctx);
}

// should called after measure_erase
static uint32_t measure_write(const char* name, const esp_partition_t* part, const uint8_t* data_to_write, int seg_len)
{
    const int total_len = SPI_FLASH_SEC_SIZE;
    time_meas_ctx_t time_ctx = {.name = name, .len = total_len * TEST_TIMES};

    time_measure_start(&time_ctx);
    for (int i = 0; i < TEST_TIMES; i ++) {
        // Erase one time, but write 100 times the same data
        size_t len = total_len;
        int offset = 0;

        while (len) {
            int len_write = MIN(seg_len, len);
            esp_err_t err = spi_flash_write(part->address + offset, data_to_write + offset, len_write);
            TEST_ESP_OK(err);

            offset += len_write;
            len -= len_write;
        }
    }
    return time_measure_end(&time_ctx);
}

static uint32_t measure_read(const char* name, const esp_partition_t* part, uint8_t* data_read, int seg_len)
{
    const int total_len = SPI_FLASH_SEC_SIZE;
    time_meas_ctx_t time_ctx = {.name = name, .len = total_len * TEST_TIMES};

    time_measure_start(&time_ctx);
    for (int i = 0; i < TEST_TIMES; i ++) {
        size_t len = total_len;
        int offset = 0;

        while (len) {
            int len_read = MIN(seg_len, len);
            esp_err_t err = spi_flash_read(part->address + offset, data_read + offset, len_read);
            TEST_ESP_OK(err);

            offset += len_read;
            len -= len_read;
        }
    }
    return time_measure_end(&time_ctx);
}

#define MEAS_WRITE(n)   (measure_write("write in "#n"-byte chunks", part, data_to_write, n))
#define MEAS_READ(n)    (measure_read("read in "#n"-byte chunks", part, data_read, n))

TEST_CASE("Test spi_flash read/write performance", "[spi_flash]")
{
    const esp_partition_t *part = get_test_data_partition();

    const int total_len = SPI_FLASH_SEC_SIZE;
    uint8_t *data_to_write = heap_caps_malloc(total_len, MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT);
    uint8_t *data_read = heap_caps_malloc(total_len, MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT);

    srand(777);
    for (int i = 0; i < total_len; i++) {
        data_to_write[i] = rand();
    }

    uint32_t erase_1 = measure_erase(part);
    uint32_t speed_WR_4B = MEAS_WRITE(4);
    uint32_t speed_RD_4B = MEAS_READ(4);
    uint32_t erase_2 = measure_erase(part);
    uint32_t speed_WR_2KB = MEAS_WRITE(2048);
    uint32_t speed_RD_2KB = MEAS_READ(2048);

    TEST_ASSERT_EQUAL_HEX8_ARRAY(data_to_write, data_read, total_len);

#define LOG_DATA(suffix) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_LEGACY_"#suffix, "%d", speed_##suffix)
#define LOG_ERASE(var) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE", "%d", var)

    LOG_DATA(WR_4B);
    LOG_DATA(RD_4B);
    LOG_DATA(WR_2KB);
    LOG_DATA(RD_2KB);

    // Erase time may vary a lot, can increase threshold if this fails with a reasonable speed
    LOG_ERASE(erase_1);
    LOG_ERASE(erase_2);

    free(data_to_write);
    free(data_read);
}

#endif //!TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3)

//  TODO: This test is disabled on S3 with legacy impl - IDF-3505
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32, ESP32S2, ESP32S3, ESP32C3)

#if portNUM_PROCESSORS > 1
TEST_CASE("spi_flash deadlock with high priority busy-waiting task", "[spi_flash][esp_flash]")
{
    typedef struct {
        QueueHandle_t queue;
        volatile bool done;
    } deadlock_test_arg_t;

    /* Create two tasks: high-priority consumer on CPU0, low-priority producer on CPU1.
     * Consumer polls the queue until it gets some data, then yields.
     * Run flash operation on CPU0. Check that when IPC1 task blocks out the producer,
     * the task which does flash operation does not get blocked by the consumer.
     */

    void producer_task(void* varg)
    {
        int dummy = 0;
        deadlock_test_arg_t* arg = (deadlock_test_arg_t*) varg;
        while (!arg->done) {
            xQueueSend(arg->queue, &dummy, 0);
            vTaskDelay(1);
        }
        vTaskDelete(NULL);
    }

    void consumer_task(void* varg)
    {
        int dummy;
        deadlock_test_arg_t* arg = (deadlock_test_arg_t*) varg;
        while (!arg->done) {
            if (xQueueReceive(arg->queue, &dummy, 0) == pdTRUE) {
                vTaskDelay(1);
            }
        }
        vTaskDelete(NULL);
    }
    deadlock_test_arg_t arg = {
        .queue = xQueueCreate(32, sizeof(int)),
        .done = false
    };

    TEST_ASSERT(xTaskCreatePinnedToCore(&producer_task, "producer", 4096, &arg, 5, NULL, 1));
    TEST_ASSERT(xTaskCreatePinnedToCore(&consumer_task, "consumer", 4096, &arg, 10, NULL, 0));

    for (int i = 0; i < 1000; i++) {
        uint32_t dummy;
        TEST_ESP_OK(spi_flash_read(0, &dummy, sizeof(dummy)));
    }

    arg.done = true;
    vTaskDelay(5);
    vQueueDelete(arg.queue);

    /* Check that current task priority is still correct */
    TEST_ASSERT_EQUAL_INT(uxTaskPriorityGet(NULL), UNITY_FREERTOS_PRIORITY);
}
#endif // portNUM_PROCESSORS > 1

#endif // !TEMPORARY_DISABLED_FOR_TARGETS(ESP32, ESP32S2, ESP32S3, ESP32C3)

TEST_CASE("WEL is cleared after boot", "[spi_flash]")
{
    esp_rom_spiflash_chip_t *legacy_chip = &g_rom_flashchip;
    uint32_t status;
    esp_rom_spiflash_read_status(legacy_chip, &status);

    TEST_ASSERT((status & 0x2) == 0);
}

#if CONFIG_ESPTOOLPY_FLASHMODE_QIO
// ISSI chip has its QE bit on other chips' BP4, which may get cleared by accident
TEST_CASE("rom unlock will not erase QE bit", "[spi_flash]")
{
    esp_rom_spiflash_chip_t *legacy_chip = &g_rom_flashchip;
    uint32_t status;
    printf("dev_id: %08X \n", legacy_chip->device_id);

    if (((legacy_chip->device_id >> 16) & 0xff) != 0x9D) {
        TEST_IGNORE_MESSAGE("This test is only for ISSI chips. Ignore.");
    }
    esp_rom_spiflash_unlock();
    esp_rom_spiflash_read_status(legacy_chip, &status);
    printf("status: %08x\n", status);

    TEST_ASSERT(status & 0x40);
}
#endif

static IRAM_ATTR NOINLINE_ATTR void test_xmc_startup(void)
{
    extern void spi_flash_disable_interrupts_caches_and_other_cpu(void);
    extern void spi_flash_enable_interrupts_caches_and_other_cpu(void);
    esp_err_t ret = ESP_OK;

    spi_flash_disable_interrupts_caches_and_other_cpu();
    ret = bootloader_flash_xmc_startup();
    spi_flash_enable_interrupts_caches_and_other_cpu();

    TEST_ASSERT_EQUAL(ESP_OK, ret);
}

TEST_CASE("bootloader_flash_xmc_startup can be called when cache disabled", "[spi_flash]")
{
    test_xmc_startup();
}