#include <stdio.h>
#include <string.h>
#include "sdkconfig.h"
#include "unity.h"
#include "test_utils.h"
#include "driver/spi_master.h"
#include "driver/gpio.h"
#include "esp_lcd_panel_io.h"
#include "esp_lcd_panel_vendor.h"
#include "esp_lcd_panel_ops.h"
#include "esp_system.h"

#define TEST_LCD_H_RES          (240)
#define TEST_LCD_V_RES          (280)
#define TEST_SPI_CLK_GPIO       (2)
#define TEST_SPI_MOSI_GPIO      (4)
#define TEST_LCD_RST_GPIO       (5)
#define TEST_LCD_DC_GPIO        (18)
#define TEST_LCD_BK_LIGHT_GPIO  (19)
#define TEST_SPI_CS_GPIO        (0)
#define TEST_SPI_HOST_ID        (1)
#define TEST_LCD_PIXEL_CLOCK_HZ (20 * 1000 * 1000)

TEST_CASE("lcd panel with spi interface (st7789)", "[lcd]")
{
#define TEST_IMG_SIZE (100 * 100 * sizeof(uint16_t))
    uint8_t *img = heap_caps_malloc(TEST_IMG_SIZE, MALLOC_CAP_DMA);
    TEST_ASSERT_NOT_NULL(img);

    gpio_config_t bk_gpio_config = {
        .mode = GPIO_MODE_OUTPUT,
        .pin_bit_mask = 1ULL << TEST_LCD_BK_LIGHT_GPIO
    };
    TEST_ESP_OK(gpio_config(&bk_gpio_config));

    spi_bus_config_t buscfg = {
        .miso_io_num = -1,
        .mosi_io_num = TEST_SPI_MOSI_GPIO,
        .sclk_io_num = TEST_SPI_CLK_GPIO,
        .quadwp_io_num = -1,
        .quadhd_io_num = -1,
        .max_transfer_sz = TEST_LCD_H_RES * TEST_LCD_V_RES * sizeof(uint16_t)
    };
    TEST_ESP_OK(spi_bus_initialize(TEST_SPI_HOST_ID, &buscfg, SPI_DMA_CH_AUTO));

    esp_lcd_panel_io_handle_t io_handle = NULL;
    esp_lcd_panel_io_spi_config_t io_config = {
        .dc_gpio_num = TEST_LCD_DC_GPIO,
        .cs_gpio_num = TEST_SPI_CS_GPIO,
        .pclk_hz = TEST_LCD_PIXEL_CLOCK_HZ,
        .spi_mode = 0,
        .trans_queue_depth = 10,
        .lcd_cmd_bits = 8,
        .lcd_param_bits = 8,
    };
    TEST_ESP_OK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)TEST_SPI_HOST_ID, &io_config, &io_handle));

    esp_lcd_panel_handle_t panel_handle = NULL;
    esp_lcd_panel_dev_config_t panel_config = {
        .reset_gpio_num = TEST_LCD_RST_GPIO,
        .color_space = ESP_LCD_COLOR_SPACE_RGB,
        .bits_per_pixel = 16,
    };
    TEST_ESP_OK(esp_lcd_new_panel_st7789(io_handle, &panel_config, &panel_handle));

    // turn off backlight
    gpio_set_level(TEST_LCD_BK_LIGHT_GPIO, 0);
    esp_lcd_panel_reset(panel_handle);
    esp_lcd_panel_init(panel_handle);
    esp_lcd_panel_invert_color(panel_handle, true);
    // the gap is LCD panel specific, even panels with the same driver IC, can have different gap value
    esp_lcd_panel_set_gap(panel_handle, 0, 20);
    // turn on backlight
    gpio_set_level(TEST_LCD_BK_LIGHT_GPIO, 1);

    for (int i = 0; i < 200; i++) {
        uint8_t color_byte = esp_random() & 0xFF;
        int x_start = esp_random() % (TEST_LCD_H_RES - 100);
        int y_start = esp_random() % (TEST_LCD_V_RES - 100);
        memset(img, color_byte, TEST_IMG_SIZE);
        esp_lcd_panel_draw_bitmap(panel_handle, x_start, y_start, x_start + 100, y_start + 100, img);
    }
    esp_lcd_panel_disp_off(panel_handle, true); // turn off screen
    TEST_ESP_OK(esp_lcd_panel_del(panel_handle));
    TEST_ESP_OK(esp_lcd_panel_io_del(io_handle));
    TEST_ESP_OK(spi_bus_free(TEST_SPI_HOST_ID));
    TEST_ESP_OK(gpio_reset_pin(TEST_LCD_BK_LIGHT_GPIO));
    free(img);
#undef TEST_IMG_SIZE
}

// The following test shows a porting example of LVGL GUI library
// To run the LVGL tests, you need to clone the LVGL library into components directory firstly
#if CONFIG_LV_USE_USER_DATA
#include "test_lvgl_port.h"

static bool notify_lvgl_ready_to_flush(esp_lcd_panel_io_handle_t panel_io, void *user_data, void *event_data)
{
    lv_disp_t *disp = *(lv_disp_t **)user_data;
    lv_disp_flush_ready(&disp->driver);
    return false;
}

TEST_CASE("lvgl gui with spi interface (st7789)", "[lcd][lvgl][ignore]")
{
    // initialize LVGL graphics library
    lv_disp_t *disp = NULL;
    lv_init();

    gpio_config_t bk_gpio_config = {
        .mode = GPIO_MODE_OUTPUT,
        .pin_bit_mask = 1ULL << TEST_LCD_BK_LIGHT_GPIO
    };
    TEST_ESP_OK(gpio_config(&bk_gpio_config));

    spi_bus_config_t buscfg = {
        .miso_io_num = -1,
        .mosi_io_num = TEST_SPI_MOSI_GPIO,
        .sclk_io_num = TEST_SPI_CLK_GPIO,
        .quadwp_io_num = -1,
        .quadhd_io_num = -1,
        .max_transfer_sz = TEST_LCD_H_RES * TEST_LCD_V_RES * 2
    };
    TEST_ESP_OK(spi_bus_initialize(TEST_SPI_HOST_ID, &buscfg, SPI_DMA_CH_AUTO));

    esp_lcd_panel_io_handle_t io_handle = NULL;
    esp_lcd_panel_io_spi_config_t io_config = {
        .dc_gpio_num = TEST_LCD_DC_GPIO,
        .cs_gpio_num = TEST_SPI_CS_GPIO,
        .pclk_hz = TEST_LCD_PIXEL_CLOCK_HZ,
        .spi_mode = 0,
        .trans_queue_depth = 10,
        .on_color_trans_done = notify_lvgl_ready_to_flush,
        .user_data = &disp, // we must use "address of disp" here, since the disp object has not been allocated
        .lcd_cmd_bits = 8,
        .lcd_param_bits = 8,
    };
    TEST_ESP_OK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)TEST_SPI_HOST_ID, &io_config, &io_handle));

    esp_lcd_panel_handle_t panel_handle = NULL;
    esp_lcd_panel_dev_config_t panel_config = {
        .reset_gpio_num = TEST_LCD_RST_GPIO,
        .color_space = ESP_LCD_COLOR_SPACE_RGB,
        .bits_per_pixel = 16,
    };
    TEST_ESP_OK(esp_lcd_new_panel_st7789(io_handle, &panel_config, &panel_handle));

    // turn off backlight
    gpio_set_level(TEST_LCD_BK_LIGHT_GPIO, 0);
    esp_lcd_panel_reset(panel_handle);
    esp_lcd_panel_init(panel_handle);
    esp_lcd_panel_invert_color(panel_handle, true);
    // the gap is LCD panel specific, even panels with the same driver IC, can have different gap value
    esp_lcd_panel_set_gap(panel_handle, 0, 20);
    // turn on backlight
    gpio_set_level(TEST_LCD_BK_LIGHT_GPIO, 1);

    test_lvgl_task_loop(panel_handle, TEST_LCD_H_RES, TEST_LCD_V_RES, &disp);
}

#endif // CONFIG_LV_USE_USER_DATA