/****************************************************************************** * * Copyright (C) 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * this file contains the main Bluetooth Manager (BTM) internal * definitions. * ******************************************************************************/ #ifndef BTM_BLE_INT_H #define BTM_BLE_INT_H #include "common/bt_target.h" #include "osi/fixed_queue.h" #include "stack/hcidefs.h" #include "stack/btm_ble_api.h" #include "btm_int.h" #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE #include "stack/smp_api.h" #endif /* scanning enable status */ #define BTM_BLE_SCAN_ENABLE 0x01 #define BTM_BLE_SCAN_DISABLE 0x00 /* advertising enable status */ #define BTM_BLE_ADV_ENABLE 0x01 #define BTM_BLE_ADV_DISABLE 0x00 /* use the high 4 bits unused by inquiry mode */ #define BTM_BLE_SELECT_SCAN 0x20 #define BTM_BLE_NAME_REQUEST 0x40 #define BTM_BLE_OBSERVE 0x80 #define BTM_BLE_MAX_WL_ENTRY 1 #define BTM_BLE_AD_DATA_LEN 31 #define BTM_BLE_ENC_MASK 0x03 #define BTM_BLE_DUPLICATE_DISABLE 0 #define BTM_BLE_DUPLICATE_ENABLE 1 #define BTM_BLE_DUPLICATE_MAX BTM_BLE_DUPLICATE_ENABLE #define BTM_BLE_GAP_DISC_SCAN_INT 18 /* Interval(scan_int) = 11.25 ms= 0x0010 * 0.625 ms */ #define BTM_BLE_GAP_DISC_SCAN_WIN 18 /* scan_window = 11.25 ms= 0x0010 * 0.625 ms */ #define BTM_BLE_GAP_ADV_INT 512 /* Tgap(gen_disc) = 1.28 s= 512 * 0.625 ms */ #define BTM_BLE_GAP_LIM_TOUT 180 /* Tgap(lim_timeout) = 180s max */ #define BTM_BLE_LOW_LATENCY_SCAN_INT 8000 /* Interval(scan_int) = 5s= 8000 * 0.625 ms */ #define BTM_BLE_LOW_LATENCY_SCAN_WIN 8000 /* scan_window = 5s= 8000 * 0.625 ms */ #define BTM_BLE_GAP_ADV_FAST_INT_1 48 /* TGAP(adv_fast_interval1) = 30(used) ~ 60 ms = 48 *0.625 */ #define BTM_BLE_GAP_ADV_FAST_INT_2 160 /* TGAP(adv_fast_interval2) = 100(used) ~ 150 ms = 160 * 0.625 ms */ #define BTM_BLE_GAP_ADV_SLOW_INT 2048 /* Tgap(adv_slow_interval) = 1.28 s= 512 * 0.625 ms */ #define BTM_BLE_GAP_ADV_DIR_MAX_INT 800 /* Tgap(dir_conn_adv_int_max) = 500 ms = 800 * 0.625 ms */ #define BTM_BLE_GAP_ADV_DIR_MIN_INT 400 /* Tgap(dir_conn_adv_int_min) = 250 ms = 400 * 0.625 ms */ #define BTM_BLE_GAP_FAST_ADV_TOUT 30 #define BTM_BLE_SEC_REQ_ACT_NONE 0 #define BTM_BLE_SEC_REQ_ACT_ENCRYPT 1 /* encrypt the link using current key or key refresh */ #define BTM_BLE_SEC_REQ_ACT_PAIR 2 #define BTM_BLE_SEC_REQ_ACT_DISCARD 3 /* discard the sec request while encryption is started but not completed */ typedef UINT8 tBTM_BLE_SEC_REQ_ACT; #define BLE_STATIC_PRIVATE_MSB_MASK 0x3f #define BLE_RESOLVE_ADDR_MSB 0x40 /* most significant bit, bit7, bit6 is 01 to be resolvable random */ #define BLE_RESOLVE_ADDR_MASK 0xc0 /* bit 6, and bit7 */ #define BTM_BLE_IS_RESOLVE_BDA(x) ((x[0] & BLE_RESOLVE_ADDR_MASK) == BLE_RESOLVE_ADDR_MSB) /* LE scan activity bit mask, continue with LE inquiry bits */ #define BTM_LE_SELECT_CONN_ACTIVE 0x0040 /* selection connection is in progress */ #define BTM_LE_OBSERVE_ACTIVE 0x0080 /* observe is in progress */ #define BTM_LE_DISCOVER_ACTIVE 0x0100 /* scan is in progress */ /* BLE scan activity mask checking */ #define BTM_BLE_IS_SCAN_ACTIVE(x) ((x) & BTM_BLE_SCAN_ACTIVE_MASK) #define BTM_BLE_IS_INQ_ACTIVE(x) ((x) & BTM_BLE_INQUIRY_MASK) #define BTM_BLE_IS_OBS_ACTIVE(x) ((x) & BTM_LE_OBSERVE_ACTIVE) #define BTM_BLE_IS_DISCO_ACTIVE(x) ((x) & BTM_LE_DISCOVER_ACTIVE) #define BTM_BLE_IS_SEL_CONN_ACTIVE(x) ((x) & BTM_LE_SELECT_CONN_ACTIVE) /* BLE ADDR type ID bit */ #define BLE_ADDR_TYPE_ID_BIT 0x02 #define BTM_VSC_CHIP_CAPABILITY_L_VERSION 55 #define BTM_VSC_CHIP_CAPABILITY_M_VERSION 95 typedef enum { BTM_BLE_IDLE, BTM_BLE_SCANNING, BTM_BLE_SCAN_PENDING, BTM_BLE_STOP_SCAN, BTM_BLE_ADVERTISING, BTM_BLE_ADV_PENDING, BTM_BLE_STOP_ADV, }tBTM_BLE_GAP_STATE; typedef struct { UINT16 data_mask; UINT8 *p_flags; UINT8 ad_data[BTM_BLE_AD_DATA_LEN]; UINT8 *p_pad; } tBTM_BLE_LOCAL_ADV_DATA; typedef struct { UINT32 inq_count; /* Used for determining if a response has already been */ /* received for the current inquiry operation. (We do not */ /* want to flood the caller with multiple responses from */ /* the same device. */ BOOLEAN scan_rsp; tBLE_BD_ADDR le_bda; } tINQ_LE_BDADDR; #define BTM_BLE_ADV_DATA_LEN_MAX 31 #define BTM_BLE_CACHE_ADV_DATA_MAX 62 #define BTM_BLE_ISVALID_PARAM(x, min, max) (((x) >= (min) && (x) <= (max)) || ((x) == BTM_BLE_CONN_PARAM_UNDEF)) #define BTM_BLE_PRIVATE_ADDR_INT 900 /* 15 minutes minimum for random address refreshing */ typedef struct { UINT16 discoverable_mode; UINT16 connectable_mode; BOOLEAN scan_params_set; UINT32 scan_window; UINT32 scan_interval; UINT8 scan_type; /* current scan type: active or passive */ UINT8 scan_duplicate_filter; /* duplicate filter enabled for scan */ UINT16 adv_interval_min; UINT16 adv_interval_max; tBTM_BLE_AFP afp; /* advertising filter policy */ tBTM_BLE_SFP sfp; /* scanning filter policy */ tBTM_START_ADV_CMPL_CBACK *p_adv_cb; tBTM_START_STOP_ADV_CMPL_CBACK *p_stop_adv_cb; tBLE_ADDR_TYPE adv_addr_type; UINT8 evt_type; UINT8 adv_mode; tBLE_BD_ADDR direct_bda; tBTM_BLE_EVT directed_conn; BOOLEAN fast_adv_on; TIMER_LIST_ENT fast_adv_timer; UINT8 adv_len; UINT8 adv_data_cache[BTM_BLE_CACHE_ADV_DATA_MAX]; BD_ADDR adv_addr; /* inquiry BD addr database */ UINT8 num_bd_entries; UINT8 max_bd_entries; tBTM_BLE_LOCAL_ADV_DATA adv_data; tBTM_BLE_ADV_CHNL_MAP adv_chnl_map; TIMER_LIST_ENT inq_timer_ent; BOOLEAN scan_rsp; tBTM_BLE_GAP_STATE state; /* Current state that the inquiry process is in */ INT8 tx_power; } tBTM_BLE_INQ_CB; /* random address resolving complete callback */ typedef void (tBTM_BLE_RESOLVE_CBACK) (void *match_rec, void *p); typedef void (tBTM_BLE_ADDR_CBACK) (BD_ADDR_PTR static_random, void *p); #define BTM_BLE_GAP_ADDR_BIT_RANDOM (1<<0) #define BTM_BLE_GAP_ADDR_BIT_RESOLVABLE (1<<1) /* random address management control block */ typedef struct { tBLE_ADDR_TYPE own_addr_type; /* local device LE address type */ UINT8 exist_addr_bit; BD_ADDR static_rand_addr; BD_ADDR resolvale_addr; BD_ADDR private_addr; BD_ADDR random_bda; BOOLEAN busy; UINT16 index; tBTM_BLE_RESOLVE_CBACK *p_resolve_cback; tBTM_BLE_ADDR_CBACK *p_generate_cback; void *p; TIMER_LIST_ENT raddr_timer_ent; tBTM_SET_LOCAL_PRIVACY_CBACK *set_local_privacy_cback; } tBTM_LE_RANDOM_CB; #define BTM_BLE_MAX_BG_CONN_DEV_NUM 10 typedef struct { UINT16 min_conn_int; UINT16 max_conn_int; UINT16 slave_latency; UINT16 supervision_tout; } tBTM_LE_CONN_PRAMS; typedef struct { BD_ADDR bd_addr; UINT8 attr; BOOLEAN is_connected; BOOLEAN in_use; } tBTM_LE_BG_CONN_DEV; /* white list using state as a bit mask */ #define BTM_BLE_WL_IDLE 0 #define BTM_BLE_WL_INIT 1 #define BTM_BLE_WL_SCAN 2 #define BTM_BLE_WL_ADV 4 typedef UINT8 tBTM_BLE_WL_STATE; /* resolving list using state as a bit mask */ #define BTM_BLE_RL_IDLE 0 #define BTM_BLE_RL_INIT 1 #define BTM_BLE_RL_SCAN 2 #define BTM_BLE_RL_ADV 4 typedef UINT8 tBTM_BLE_RL_STATE; /* BLE connection state */ #define BLE_CONN_IDLE 0 #define BLE_DIR_CONN 1 #define BLE_BG_CONN 2 #define BLE_CONN_CANCEL 3 typedef UINT8 tBTM_BLE_CONN_ST; typedef struct { void *p_param; } tBTM_BLE_CONN_REQ; /* LE state request */ #define BTM_BLE_STATE_INVALID 0 #define BTM_BLE_STATE_CONN_ADV 1 #define BTM_BLE_STATE_INIT 2 #define BTM_BLE_STATE_MASTER 3 #define BTM_BLE_STATE_SLAVE 4 #define BTM_BLE_STATE_LO_DUTY_DIR_ADV 5 #define BTM_BLE_STATE_HI_DUTY_DIR_ADV 6 #define BTM_BLE_STATE_NON_CONN_ADV 7 #define BTM_BLE_STATE_PASSIVE_SCAN 8 #define BTM_BLE_STATE_ACTIVE_SCAN 9 #define BTM_BLE_STATE_SCAN_ADV 10 #define BTM_BLE_STATE_MAX 11 typedef UINT8 tBTM_BLE_STATE; #define BTM_BLE_STATE_CONN_ADV_BIT 0x0001 #define BTM_BLE_STATE_INIT_BIT 0x0002 #define BTM_BLE_STATE_MASTER_BIT 0x0004 #define BTM_BLE_STATE_SLAVE_BIT 0x0008 #define BTM_BLE_STATE_LO_DUTY_DIR_ADV_BIT 0x0010 #define BTM_BLE_STATE_HI_DUTY_DIR_ADV_BIT 0x0020 #define BTM_BLE_STATE_NON_CONN_ADV_BIT 0x0040 #define BTM_BLE_STATE_PASSIVE_SCAN_BIT 0x0080 #define BTM_BLE_STATE_ACTIVE_SCAN_BIT 0x0100 #define BTM_BLE_STATE_SCAN_ADV_BIT 0x0200 typedef UINT16 tBTM_BLE_STATE_MASK; #define BTM_BLE_STATE_ALL_MASK 0x03ff #define BTM_BLE_STATE_ALL_ADV_MASK (BTM_BLE_STATE_CONN_ADV_BIT|BTM_BLE_STATE_LO_DUTY_DIR_ADV_BIT|BTM_BLE_STATE_HI_DUTY_DIR_ADV_BIT|BTM_BLE_STATE_SCAN_ADV_BIT) #define BTM_BLE_STATE_ALL_SCAN_MASK (BTM_BLE_STATE_PASSIVE_SCAN_BIT|BTM_BLE_STATE_ACTIVE_SCAN_BIT) #define BTM_BLE_STATE_ALL_CONN_MASK (BTM_BLE_STATE_MASTER_BIT|BTM_BLE_STATE_SLAVE_BIT) #ifndef BTM_LE_RESOLVING_LIST_MAX #define BTM_LE_RESOLVING_LIST_MAX 0x20 #endif #define BTM_DUPLICATE_SCAN_EXCEPTIONAL_INFO_ADV_ADDR 0 #define BTM_DUPLICATE_SCAN_EXCEPTIONAL_INFO_MESH_LINK_ID 1 typedef struct { BD_ADDR *resolve_q_random_pseudo; UINT8 *resolve_q_action; UINT8 q_next; UINT8 q_pending; } tBTM_BLE_RESOLVE_Q; typedef struct { BOOLEAN in_use; BOOLEAN to_add; BD_ADDR bd_addr; tBLE_ADDR_TYPE addr_type; UINT8 attr; } tBTM_BLE_WL_OP; /* BLE privacy mode */ #define BTM_PRIVACY_NONE 0 /* BLE no privacy */ #define BTM_PRIVACY_1_1 1 /* BLE privacy 1.1, do not support privacy 1.0 */ #define BTM_PRIVACY_1_2 2 /* BLE privacy 1.2 */ #define BTM_PRIVACY_MIXED 3 /* BLE privacy mixed mode, broadcom propietary mode */ typedef UINT8 tBTM_PRIVACY_MODE; /* data length change event callback */ typedef void (tBTM_DATA_LENGTH_CHANGE_CBACK) (UINT16 max_tx_length, UINT16 max_rx_length); /* Define BLE Device Management control structure */ typedef struct { UINT16 scan_activity; /* LE scan activity mask */ /***************************************************** ** BLE Inquiry *****************************************************/ tBTM_BLE_INQ_CB inq_var; /* observer callback and timer */ tBTM_INQ_RESULTS_CB *p_obs_results_cb; tBTM_CMPL_CB *p_obs_cmpl_cb; tBTM_INQ_DIS_CB *p_obs_discard_cb; TIMER_LIST_ENT obs_timer_ent; /* scan callback and timer */ tBTM_INQ_RESULTS_CB *p_scan_results_cb; tBTM_CMPL_CB *p_scan_cmpl_cb; TIMER_LIST_ENT scan_timer_ent; /* background connection procedure cb value */ tBTM_BLE_CONN_TYPE bg_conn_type; UINT32 scan_int; UINT32 scan_win; tBTM_BLE_SEL_CBACK *p_select_cback; /* white list information */ UINT8 white_list_avail_size; tBTM_ADD_WHITELIST_CBACK *add_wl_cb; tBTM_BLE_WL_STATE wl_state; fixed_queue_t *conn_pending_q; tBTM_BLE_CONN_ST conn_state; /* random address management control block */ tBTM_LE_RANDOM_CB addr_mgnt_cb; BOOLEAN enabled; #if BLE_PRIVACY_SPT == TRUE BOOLEAN mixed_mode; /* privacy 1.2 mixed mode is on or not */ tBTM_PRIVACY_MODE privacy_mode; /* privacy mode */ UINT8 resolving_list_avail_size; /* resolving list available size */ tBTM_BLE_RESOLVE_Q resolving_list_pend_q; /* Resolving list queue */ tBTM_BLE_RL_STATE suspended_rl_state; /* Suspended resolving list state */ UINT8 *irk_list_mask; /* IRK list availability mask, up to max entry bits */ tBTM_BLE_RL_STATE rl_state; /* Resolving list state */ #endif tBTM_BLE_WL_OP wl_op_q[BTM_BLE_MAX_BG_CONN_DEV_NUM]; /* current BLE link state */ tBTM_BLE_STATE_MASK cur_states; /* bit mask of tBTM_BLE_STATE */ UINT8 link_count[2]; /* total link count master and slave*/ tBTM_UPDATE_DUPLICATE_EXCEPTIONAL_LIST_CMPL_CBACK *update_exceptional_list_cmp_cb; } tBTM_BLE_CB; #ifdef __cplusplus extern "C" { #endif void btm_ble_timeout(TIMER_LIST_ENT *p_tle); void btm_ble_process_adv_pkt (UINT8 *p); void btm_ble_process_adv_discard_evt(UINT8 *p); void btm_ble_proc_scan_rsp_rpt (UINT8 *p); tBTM_STATUS btm_ble_read_remote_name(BD_ADDR remote_bda, tBTM_INQ_INFO *p_cur, tBTM_CMPL_CB *p_cb); BOOLEAN btm_ble_cancel_remote_name(BD_ADDR remote_bda); tBTM_STATUS btm_ble_set_discoverability(UINT16 combined_mode); tBTM_STATUS btm_ble_set_connectability(UINT16 combined_mode); tBTM_STATUS btm_ble_start_inquiry (UINT8 mode, UINT8 duration); void btm_ble_stop_scan(void); void btm_clear_all_pending_le_entry(void); BOOLEAN btm_ble_send_extended_scan_params(UINT8 scan_type, UINT32 scan_int, UINT32 scan_win, UINT8 addr_type_own, UINT8 scan_filter_policy); void btm_ble_stop_inquiry(void); void btm_ble_init (void); void btm_ble_free (void); void btm_ble_connected (UINT8 *bda, UINT16 handle, UINT8 enc_mode, UINT8 role, tBLE_ADDR_TYPE addr_type, BOOLEAN addr_matched); void btm_ble_read_remote_features_complete(UINT8 *p); void btm_ble_write_adv_enable_complete(UINT8 *p); void btm_ble_conn_complete(UINT8 *p, UINT16 evt_len, BOOLEAN enhanced); void btm_read_ble_local_supported_states_complete(UINT8 *p, UINT16 evt_len); tBTM_BLE_CONN_ST btm_ble_get_conn_st(void); void btm_ble_set_conn_st(tBTM_BLE_CONN_ST new_st); UINT8 *btm_ble_build_adv_data(tBTM_BLE_AD_MASK *p_data_mask, UINT8 **p_dst, tBTM_BLE_ADV_DATA *p_data); tBTM_STATUS btm_ble_start_adv(void); tBTM_STATUS btm_ble_stop_adv(void); tBTM_STATUS btm_ble_start_scan(void); void btm_ble_create_ll_conn_complete (UINT8 status); /* LE security function from btm_sec.c */ #if SMP_INCLUDED == TRUE void btm_ble_link_sec_check(BD_ADDR bd_addr, tBTM_LE_AUTH_REQ auth_req, tBTM_BLE_SEC_REQ_ACT *p_sec_req_act); void btm_ble_ltk_request_reply(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk); UINT8 btm_proc_smp_cback(tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data); tBTM_STATUS btm_ble_set_encryption (BD_ADDR bd_addr, void *p_ref_data, UINT8 link_role); void btm_ble_ltk_request(UINT16 handle, UINT8 rand[8], UINT16 ediv); tBTM_STATUS btm_ble_start_encrypt(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk); void btm_ble_link_encrypted(BD_ADDR bd_addr, UINT8 encr_enable); #endif /* LE device management functions */ void btm_ble_reset_id( void ); /* security related functions */ void btm_ble_increment_sign_ctr(BD_ADDR bd_addr, BOOLEAN is_local ); BOOLEAN btm_get_local_div (BD_ADDR bd_addr, UINT16 *p_div); BOOLEAN btm_ble_get_enc_key_type(BD_ADDR bd_addr, UINT8 *p_key_types); void btm_ble_test_command_complete(UINT8 *p); void btm_ble_rand_enc_complete (UINT8 *p, UINT16 op_code, tBTM_RAND_ENC_CB *p_enc_cplt_cback); void btm_sec_save_le_key(BD_ADDR bd_addr, tBTM_LE_KEY_TYPE key_type, tBTM_LE_KEY_VALUE *p_keys, BOOLEAN pass_to_application); void btm_ble_update_sec_key_size(BD_ADDR bd_addr, UINT8 enc_key_size); UINT8 btm_ble_read_sec_key_size(BD_ADDR bd_addr); /* white list function */ BOOLEAN btm_update_dev_to_white_list(BOOLEAN to_add, BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, tBTM_ADD_WHITELIST_CBACK *add_wl_cb); void btm_update_scanner_filter_policy(tBTM_BLE_SFP scan_policy); void btm_update_adv_filter_policy(tBTM_BLE_AFP adv_policy); void btm_ble_clear_white_list (void); void btm_read_white_list_size_complete(UINT8 *p, UINT16 evt_len); void btm_ble_add_2_white_list_complete(UINT8 status); void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len); void btm_ble_clear_white_list_complete(UINT8 *p, UINT16 evt_len); void btm_ble_white_list_init(UINT8 white_list_size); /* background connection function */ BOOLEAN btm_ble_suspend_bg_conn(void); BOOLEAN btm_ble_resume_bg_conn(void); void btm_ble_initiate_select_conn(BD_ADDR bda); BOOLEAN btm_ble_start_auto_conn(BOOLEAN start); BOOLEAN btm_ble_start_select_conn(BOOLEAN start, tBTM_BLE_SEL_CBACK *p_select_cback); BOOLEAN btm_ble_renew_bg_conn_params(BOOLEAN add, BD_ADDR bd_addr); void btm_write_dir_conn_wl(BD_ADDR target_addr); void btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bda, UINT8 status); BOOLEAN btm_execute_wl_dev_operation(void); void btm_ble_update_link_topology_mask(UINT8 role, BOOLEAN increase); /* direct connection utility */ BOOLEAN btm_send_pending_direct_conn(void); void btm_ble_enqueue_direct_conn_req(void *p_param); /* BLE address management */ void btm_gen_resolvable_private_addr (void *p_cmd_cplt_cback); void btm_gen_non_resolvable_private_addr (tBTM_BLE_ADDR_CBACK *p_cback, void *p); void btm_ble_resolve_random_addr(BD_ADDR random_bda, tBTM_BLE_RESOLVE_CBACK *p_cback, void *p); void btm_gen_resolve_paddr_low(tBTM_RAND_ENC *p); /* privacy function */ #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) /* BLE address mapping with CS feature */ BOOLEAN btm_identity_addr_to_random_pseudo(BD_ADDR bd_addr, UINT8 *p_addr_type, BOOLEAN refresh); BOOLEAN btm_random_pseudo_to_identity_addr(BD_ADDR random_pseudo, UINT8 *p_static_addr_type); void btm_ble_refresh_peer_resolvable_private_addr(BD_ADDR pseudo_bda, BD_ADDR rra, UINT8 rra_type); void btm_ble_refresh_local_resolvable_private_addr(BD_ADDR pseudo_addr, BD_ADDR local_rpa); void btm_ble_read_resolving_list_entry_complete(UINT8 *p, UINT16 evt_len) ; void btm_ble_remove_resolving_list_entry_complete(UINT8 *p, UINT16 evt_len); void btm_ble_add_resolving_list_entry_complete(UINT8 *p, UINT16 evt_len); void btm_ble_clear_resolving_list_complete(UINT8 *p, UINT16 evt_len); void btm_read_ble_resolving_list_size_complete (UINT8 *p, UINT16 evt_len); void btm_ble_enable_resolving_list(UINT8); BOOLEAN btm_ble_disable_resolving_list(UINT8 rl_mask, BOOLEAN to_resume); void btm_ble_enable_resolving_list_for_platform (UINT8 rl_mask); void btm_ble_resolving_list_init(UINT8 max_irk_list_sz); void btm_ble_resolving_list_cleanup(void); #endif void btm_ble_multi_adv_configure_rpa (tBTM_BLE_MULTI_ADV_INST *p_inst); void btm_ble_multi_adv_init(void); void *btm_ble_multi_adv_get_ref(UINT8 inst_id); void btm_ble_multi_adv_cleanup(void); void btm_ble_multi_adv_reenable(UINT8 inst_id); void btm_ble_multi_adv_enb_privacy(BOOLEAN enable); char btm_ble_map_adv_tx_power(int tx_power_index); void btm_ble_batchscan_init(void); void btm_ble_batchscan_cleanup(void); void btm_ble_adv_filter_init(void); void btm_ble_adv_filter_cleanup(void); BOOLEAN btm_ble_topology_check(tBTM_BLE_STATE_MASK request); BOOLEAN btm_ble_clear_topology_mask(tBTM_BLE_STATE_MASK request_state); BOOLEAN btm_ble_set_topology_mask(tBTM_BLE_STATE_MASK request_state); tBTM_BLE_STATE_MASK btm_ble_get_topology_mask(void); #if BTM_BLE_CONFORMANCE_TESTING == TRUE void btm_ble_set_no_disc_if_pair_fail (BOOLEAN disble_disc); void btm_ble_set_test_mac_value (BOOLEAN enable, UINT8 *p_test_mac_val); void btm_ble_set_test_local_sign_cntr_value(BOOLEAN enable, UINT32 test_local_sign_cntr); void btm_set_random_address(BD_ADDR random_bda); void btm_ble_set_keep_rfu_in_auth_req(BOOLEAN keep_rfu); #endif /* #ifdef __cplusplus } #endif */ #endif