// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #include #include #include "freertos/FreeRTOS.h" #include "freertos/semphr.h" #include "unity.h" #include "test_utils.h" #include "test_hcd_common.h" //We talk to a non-existent device. Since ISOC out requires no ACK, there should be no errors. #define MOCK_ISOC_EP_NUM 2 #define MOCK_ISOC_EP_MPS 512 #define NUM_IRPS 3 #define NUM_PACKETS_PER_IRP 3 #define ISOC_PACKET_SIZE MOCK_ISOC_EP_MPS #define IRP_DATA_BUFF_SIZE (NUM_PACKETS_PER_IRP * ISOC_PACKET_SIZE) static const usb_desc_ep_t isoc_out_ep_desc = { .bLength = sizeof(usb_desc_ep_t), .bDescriptorType = USB_B_DESCRIPTOR_TYPE_ENDPOINT, .bEndpointAddress = MOCK_ISOC_EP_NUM, .bmAttributes = USB_BM_ATTRIBUTES_XFER_ISOC, .wMaxPacketSize = MOCK_ISOC_EP_MPS, //MPS of 512 bytes .bInterval = 1, //Isoc interval is (2 ^ (bInterval - 1)) which means an interval of 1ms }; /* Test HCD ISOC pipe IRPs Purpose: - Test that an isochronous pipe can be created - IRPs can be created and enqueued to the isoc pipe pipe - isoc pipe returns HCD_PIPE_EVENT_IRP_DONE for completed IRPs - Test utilizes ISOC OUT transfers and do not require ACKs. So the isoc pipe will target a non existing endpoint Procedure: - Setup HCD and wait for connection - Allocate default pipe and enumerate the device - Allocate an isochronous pipe and multiple IRPs. Each IRP should contain multiple packets to test HCD's ability to schedule an IRP across multiple intervals. - Enqueue those IRPs - Expect HCD_PIPE_EVENT_IRP_DONE for each IRP. Verify that data is correct using logic analyzer - Deallocate IRPs - Teardown */ TEST_CASE("Test HCD isochronous pipe IRPs", "[hcd][ignore]") { hcd_port_handle_t port_hdl = test_hcd_setup(); //Setup the HCD and port usb_speed_t port_speed = test_hcd_wait_for_conn(port_hdl); //Trigger a connection //The MPS of the ISOC OUT pipe is quite large, so we need to bias the FIFO sizing TEST_ASSERT_EQUAL(ESP_OK, hcd_port_set_fifo_bias(port_hdl, HCD_PORT_FIFO_BIAS_PTX)); vTaskDelay(pdMS_TO_TICKS(100)); //Short delay send of SOF (for FS) or EOPs (for LS) //Enumerate and reset device hcd_pipe_handle_t default_pipe = test_hcd_pipe_alloc(port_hdl, NULL, 0, port_speed); //Create a default pipe (using a NULL EP descriptor) uint8_t dev_addr = test_hcd_enum_devc(default_pipe); //Create ISOC OUT pipe to non-existent device hcd_pipe_handle_t isoc_out_pipe = test_hcd_pipe_alloc(port_hdl, &isoc_out_ep_desc, dev_addr + 1, port_speed); //Create IRPs usb_irp_t *irp_list[NUM_IRPS]; //Initialize IRPs for (int irp_idx = 0; irp_idx < NUM_IRPS; irp_idx++) { irp_list[irp_idx] = test_hcd_alloc_irp(NUM_PACKETS_PER_IRP, IRP_DATA_BUFF_SIZE); irp_list[irp_idx]->num_bytes = 0; //num_bytes is not used for ISOC irp_list[irp_idx]->context = IRP_CONTEXT_VAL; for (int pkt_idx = 0; pkt_idx < NUM_PACKETS_PER_IRP; pkt_idx++) { irp_list[irp_idx]->iso_packet_desc[pkt_idx].length = ISOC_PACKET_SIZE; //Each packet will consist of the same byte, but each subsequent packet's byte will increment (i.e., packet 0 transmits all 0x0, packet 1 transmits all 0x1) memset(&irp_list[irp_idx]->data_buffer[pkt_idx * ISOC_PACKET_SIZE], (irp_idx * NUM_IRPS) + pkt_idx, ISOC_PACKET_SIZE); } } //Enqueue IRPs for (int i = 0; i < NUM_IRPS; i++) { TEST_ASSERT_EQUAL(ESP_OK, hcd_irp_enqueue(isoc_out_pipe, irp_list[i])); } //Wait for each done event from each IRP for (int i = 0; i < NUM_IRPS; i++) { test_hcd_expect_pipe_event(isoc_out_pipe, HCD_PIPE_EVENT_IRP_DONE); } //Dequeue IRPs for (int irp_idx = 0; irp_idx < NUM_IRPS; irp_idx++) { usb_irp_t *irp = hcd_irp_dequeue(isoc_out_pipe); TEST_ASSERT_EQUAL(irp_list[irp_idx], irp); TEST_ASSERT_EQUAL(IRP_CONTEXT_VAL, irp->context); for (int pkt_idx = 0; pkt_idx < NUM_PACKETS_PER_IRP; pkt_idx++) { TEST_ASSERT_EQUAL(USB_TRANSFER_STATUS_COMPLETED, irp->iso_packet_desc[pkt_idx].status); } } //Free IRP list and pipe for (int i = 0; i < NUM_IRPS; i++) { test_hcd_free_irp(irp_list[i]); } test_hcd_pipe_free(isoc_out_pipe); test_hcd_pipe_free(default_pipe); //Cleanup test_hcd_wait_for_disconn(port_hdl, false); test_hcd_teardown(port_hdl); }