/* * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #pragma once #include #include "esp_err.h" #include "sd_protocol_types.h" #ifdef __cplusplus extern "C" { #endif /** * Probe and initialize SD/MMC card using given host * * @note Only SD cards (SDSC and SDHC/SDXC) are supported now. * Support for MMC/eMMC cards will be added later. * * @param host pointer to structure defining host controller * @param out_card pointer to structure which will receive information * about the card when the function completes * @return * - ESP_OK on success * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_card_init(const sdmmc_host_t* host, sdmmc_card_t* out_card); /** * @brief Print information about the card to a stream * @param stream stream obtained using fopen or fdopen * @param card card information structure initialized using sdmmc_card_init */ void sdmmc_card_print_info(FILE* stream, const sdmmc_card_t* card); /** * Get status of SD/MMC card * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @return * - ESP_OK on success * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_get_status(sdmmc_card_t* card); /** * Write given number of sectors to SD/MMC card * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param src pointer to data buffer to read data from; data size must be * equal to sector_count * card->csd.sector_size * @param start_sector sector where to start writing * @param sector_count number of sectors to write * @return * - ESP_OK on success or sector_count equal to 0 * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_write_sectors(sdmmc_card_t* card, const void* src, size_t start_sector, size_t sector_count); /** * Read given number of sectors from the SD/MMC card * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param dst pointer to data buffer to write into; buffer size must be * at least sector_count * card->csd.sector_size * @param start_sector sector where to start reading * @param sector_count number of sectors to read * @return * - ESP_OK on success or sector_count equal to 0 * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_read_sectors(sdmmc_card_t* card, void* dst, size_t start_sector, size_t sector_count); /** * Erase given number of sectors from the SD/MMC card * * @note When sdmmc_erase_sectors used with cards in SDSPI mode, it was * observed that card requires re-init after erase operation. * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param start_sector sector where to start erase * @param sector_count number of sectors to erase * @param arg erase command (CMD38) argument * @return * - ESP_OK on success or sector_count equal to 0 * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_erase_sectors(sdmmc_card_t* card, size_t start_sector, size_t sector_count, sdmmc_erase_arg_t arg); /** * Check if SD/MMC card supports discard * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @return * - ESP_OK if supported by the card/device * - ESP_FAIL if not supported by the card/device */ esp_err_t sdmmc_can_discard(sdmmc_card_t* card); /** * Check if SD/MMC card supports trim * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @return * - ESP_OK if supported by the card/device * - ESP_FAIL if not supported by the card/device */ esp_err_t sdmmc_can_trim(sdmmc_card_t* card); /** * Check if SD/MMC card supports sanitize * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @return * - ESP_OK if supported by the card/device * - ESP_FAIL if not supported by the card/device */ esp_err_t sdmmc_mmc_can_sanitize(sdmmc_card_t* card); /** * Sanitize the data that was unmapped by a Discard command * * @note Discard command has to precede sanitize operation. To discard, use * MMC_DICARD_ARG with sdmmc_erase_sectors argument * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param timeout_ms timeout value in milliseconds required to sanitize the * selected range of sectors. * @return * - ESP_OK on success * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_mmc_sanitize(sdmmc_card_t* card, uint32_t timeout_ms); /** * Erase complete SD/MMC card * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @return * - ESP_OK on success * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_full_erase(sdmmc_card_t* card); /** * Read one byte from an SDIO card using IO_RW_DIRECT (CMD52) * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param function IO function number * @param reg byte address within IO function * @param[out] out_byte output, receives the value read from the card * @return * - ESP_OK on success * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_io_read_byte(sdmmc_card_t* card, uint32_t function, uint32_t reg, uint8_t *out_byte); /** * Write one byte to an SDIO card using IO_RW_DIRECT (CMD52) * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param function IO function number * @param reg byte address within IO function * @param in_byte value to be written * @param[out] out_byte if not NULL, receives new byte value read * from the card (read-after-write). * @return * - ESP_OK on success * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_io_write_byte(sdmmc_card_t* card, uint32_t function, uint32_t reg, uint8_t in_byte, uint8_t* out_byte); /** * Read multiple bytes from an SDIO card using IO_RW_EXTENDED (CMD53) * * This function performs read operation using CMD53 in byte mode. * For block mode, see sdmmc_io_read_blocks. * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param function IO function number * @param addr byte address within IO function where reading starts * @param dst buffer which receives the data read from card * @param size number of bytes to read * @return * - ESP_OK on success * - ESP_ERR_INVALID_SIZE if size exceeds 512 bytes * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_io_read_bytes(sdmmc_card_t* card, uint32_t function, uint32_t addr, void* dst, size_t size); /** * Write multiple bytes to an SDIO card using IO_RW_EXTENDED (CMD53) * * This function performs write operation using CMD53 in byte mode. * For block mode, see sdmmc_io_write_blocks. * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param function IO function number * @param addr byte address within IO function where writing starts * @param src data to be written * @param size number of bytes to write * @return * - ESP_OK on success * - ESP_ERR_INVALID_SIZE if size exceeds 512 bytes * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_io_write_bytes(sdmmc_card_t* card, uint32_t function, uint32_t addr, const void* src, size_t size); /** * Read blocks of data from an SDIO card using IO_RW_EXTENDED (CMD53) * * This function performs read operation using CMD53 in block mode. * For byte mode, see sdmmc_io_read_bytes. * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param function IO function number * @param addr byte address within IO function where writing starts * @param dst buffer which receives the data read from card * @param size number of bytes to read, must be divisible by the card block * size. * @return * - ESP_OK on success * - ESP_ERR_INVALID_SIZE if size is not divisible by 512 bytes * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_io_read_blocks(sdmmc_card_t* card, uint32_t function, uint32_t addr, void* dst, size_t size); /** * Write blocks of data to an SDIO card using IO_RW_EXTENDED (CMD53) * * This function performs write operation using CMD53 in block mode. * For byte mode, see sdmmc_io_write_bytes. * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param function IO function number * @param addr byte address within IO function where writing starts * @param src data to be written * @param size number of bytes to read, must be divisible by the card block * size. * @return * - ESP_OK on success * - ESP_ERR_INVALID_SIZE if size is not divisible by 512 bytes * - One of the error codes from SDMMC host controller */ esp_err_t sdmmc_io_write_blocks(sdmmc_card_t* card, uint32_t function, uint32_t addr, const void* src, size_t size); /** * Enable SDIO interrupt in the SDMMC host * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @return * - ESP_OK on success * - ESP_ERR_NOT_SUPPORTED if the host controller does not support * IO interrupts */ esp_err_t sdmmc_io_enable_int(sdmmc_card_t* card); /** * Block until an SDIO interrupt is received * * Slave uses D1 line to signal interrupt condition to the host. * This function can be used to wait for the interrupt. * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param timeout_ticks time to wait for the interrupt, in RTOS ticks * @return * - ESP_OK if the interrupt is received * - ESP_ERR_NOT_SUPPORTED if the host controller does not support * IO interrupts * - ESP_ERR_TIMEOUT if the interrupt does not happen in timeout_ticks */ esp_err_t sdmmc_io_wait_int(sdmmc_card_t* card, TickType_t timeout_ticks); /** * Get the data of CIS region of an SDIO card. * * You may provide a buffer not sufficient to store all the CIS data. In this * case, this function stores as much data into your buffer as possible. Also, * this function will try to get and return the size required for you. * * @param card pointer to card information structure previously initialized * using sdmmc_card_init * @param out_buffer Output buffer of the CIS data * @param buffer_size Size of the buffer. * @param inout_cis_size Mandatory, pointer to a size, input and output. * - input: Limitation of maximum searching range, should be 0 or larger than * buffer_size. The function searches for CIS_CODE_END until this range. Set to * 0 to search infinitely. * - output: The size required to store all the CIS data, if CIS_CODE_END is found. * * @return * - ESP_OK: on success * - ESP_ERR_INVALID_RESPONSE: if the card does not (correctly) support CIS. * - ESP_ERR_INVALID_SIZE: CIS_CODE_END found, but buffer_size is less than * required size, which is stored in the inout_cis_size then. * - ESP_ERR_NOT_FOUND: if the CIS_CODE_END not found. Increase input value of * inout_cis_size or set it to 0, if you still want to search for the end; * output value of inout_cis_size is invalid in this case. * - and other error code return from sdmmc_io_read_bytes */ esp_err_t sdmmc_io_get_cis_data(sdmmc_card_t* card, uint8_t* out_buffer, size_t buffer_size, size_t* inout_cis_size); /** * Parse and print the CIS information of an SDIO card. * * @note Not all the CIS codes and all kinds of tuples are supported. If you * see some unresolved code, you can add the parsing of these code in * sdmmc_io.c and contribute to the IDF through the Github repository. * * using sdmmc_card_init * @param buffer Buffer to parse * @param buffer_size Size of the buffer. * @param fp File pointer to print to, set to NULL to print to stdout. * * @return * - ESP_OK: on success * - ESP_ERR_NOT_SUPPORTED: if the value from the card is not supported to be parsed. * - ESP_ERR_INVALID_SIZE: if the CIS size fields are not correct. */ esp_err_t sdmmc_io_print_cis_info(uint8_t* buffer, size_t buffer_size, FILE* fp); #ifdef __cplusplus } #endif