| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 | | ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | # HTTP Request Example (See the README.md file in the upper level 'examples' directory for more information about examples.) Uses a POSIX socket to make a very simple HTTP request. ## How to use example Before project configuration and build, be sure to set the correct chip target using `idf.py set-target `. ### Hardware Required * A development board with ESP32/ESP32-S2/ESP32-C3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.) * A USB cable for power supply and programming ### Configure the project ``` idf.py menuconfig ``` Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details. ### Build and Flash Build the project and flash it to the board, then run monitor tool to view serial output: ``` idf.py -p PORT flash monitor ``` (Replace PORT with the name of the serial port to use.) (To exit the serial monitor, type ``Ctrl-]``.) See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects. ## Example Output ``` I (10557) example_connect: - IPv4 address: 192.168.194.219 I (10557) example_connect: - IPv6 address: fe80:0000:0000:0000:266f:28ff:fe80:2c74, type: ESP_IP6_ADDR_IS_LINK_LOCAL W (10577) wifi:idx:0 (ifx:0, ee:6d:19:60:f6:0e), tid:0, ssn:3, winSize:64 I (10587) example: DNS lookup succeeded. IP=93.184.216.34 I (10587) example: ... allocated socket I (10917) example: ... connected I (10917) example: ... socket send success I (10927) example: ... set socket receiving timeout success HTTP/1.0 200 OK Age: 317271 Cache-Control: max-age=604800 Content-Type: text/html; charset=UTF-8 Date: Mon, 06 Sep 2021 08:09:49 GMT Etag: "3147526947+ident" Expires: Mon, 13 Sep 2021 08:09:49 GMT Last-Modified: Thu, 17 Oct 2019 07:18:26 GMT Server: ECS (nyb/1D2B) Vary: Accept-Encoding X-Cache: HIT Content-Length: 1256 Connection: close Example Domain

Example Domain

This domain is for use in illustrative examples in documents. You may use this domain in literature without prior coordination or asking for permission.

More information...

I (11467) example: ... done reading from socket. Last read return=0 errno=128. I (11477) example: 10... I (12477) example: 9... I (13477) example: 8... ```