/*
 * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

// #define LOG_LOCAL_LEVEL ESP_LOG_DEBUG

#include <stdlib.h>
#include <sys/cdefs.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_lcd_panel_interface.h"
#include "esp_lcd_panel_io.h"
#include "esp_lcd_panel_vendor.h"
#include "esp_lcd_panel_ops.h"
#include "driver/gpio.h"
#include "esp_log.h"
#include "esp_check.h"

static const char *TAG = "lcd_panel.ssd1306";

// SSD1306 commands
#define SSD1306_CMD_SET_MEMORY_ADDR_MODE  0x20
#define SSD1306_CMD_SET_COLUMN_RANGE      0x21
#define SSD1306_CMD_SET_PAGE_RANGE        0x22
#define SSD1306_CMD_SET_CHARGE_PUMP       0x8D
#define SSD1306_CMD_MIRROR_X_OFF          0xA0
#define SSD1306_CMD_MIRROR_X_ON           0xA1
#define SSD1306_CMD_INVERT_OFF            0xA6
#define SSD1306_CMD_INVERT_ON             0xA7
#define SSD1306_CMD_DISP_OFF              0xAE
#define SSD1306_CMD_DISP_ON               0xAF
#define SSD1306_CMD_MIRROR_Y_OFF          0xC0
#define SSD1306_CMD_MIRROR_Y_ON           0xC8

static esp_err_t panel_ssd1306_del(esp_lcd_panel_t *panel);
static esp_err_t panel_ssd1306_reset(esp_lcd_panel_t *panel);
static esp_err_t panel_ssd1306_init(esp_lcd_panel_t *panel);
static esp_err_t panel_ssd1306_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data);
static esp_err_t panel_ssd1306_invert_color(esp_lcd_panel_t *panel, bool invert_color_data);
static esp_err_t panel_ssd1306_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y);
static esp_err_t panel_ssd1306_swap_xy(esp_lcd_panel_t *panel, bool swap_axes);
static esp_err_t panel_ssd1306_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap);
static esp_err_t panel_ssd1306_disp_off(esp_lcd_panel_t *panel, bool off);

typedef struct {
    esp_lcd_panel_t base;
    esp_lcd_panel_io_handle_t io;
    int reset_gpio_num;
    bool reset_level;
    int x_gap;
    int y_gap;
    unsigned int bits_per_pixel;
} ssd1306_panel_t;

esp_err_t esp_lcd_new_panel_ssd1306(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel)
{
    esp_err_t ret = ESP_OK;
    ssd1306_panel_t *ssd1306 = NULL;
    ESP_GOTO_ON_FALSE(io && panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, err, TAG, "invalid argument");
    ESP_GOTO_ON_FALSE(panel_dev_config->color_space == ESP_LCD_COLOR_SPACE_MONOCHROME, ESP_ERR_INVALID_ARG, err, TAG, "support monochrome only");
    ESP_GOTO_ON_FALSE(panel_dev_config->bits_per_pixel == 1, ESP_ERR_INVALID_ARG, err, TAG, "bpp must be 1");
    ssd1306 = calloc(1, sizeof(ssd1306_panel_t));
    ESP_GOTO_ON_FALSE(ssd1306, ESP_ERR_NO_MEM, err, TAG, "no mem for ssd1306 panel");

    if (panel_dev_config->reset_gpio_num >= 0) {
        gpio_config_t io_conf = {
            .mode = GPIO_MODE_OUTPUT,
            .pin_bit_mask = 1ULL << panel_dev_config->reset_gpio_num,
        };
        ESP_GOTO_ON_ERROR(gpio_config(&io_conf), err, TAG, "configure GPIO for RST line failed");
    }

    ssd1306->io = io;
    ssd1306->bits_per_pixel = panel_dev_config->bits_per_pixel;
    ssd1306->reset_gpio_num = panel_dev_config->reset_gpio_num;
    ssd1306->reset_level = panel_dev_config->flags.reset_active_high;
    ssd1306->base.del = panel_ssd1306_del;
    ssd1306->base.reset = panel_ssd1306_reset;
    ssd1306->base.init = panel_ssd1306_init;
    ssd1306->base.draw_bitmap = panel_ssd1306_draw_bitmap;
    ssd1306->base.invert_color = panel_ssd1306_invert_color;
    ssd1306->base.set_gap = panel_ssd1306_set_gap;
    ssd1306->base.mirror = panel_ssd1306_mirror;
    ssd1306->base.swap_xy = panel_ssd1306_swap_xy;
    ssd1306->base.disp_off = panel_ssd1306_disp_off;
    *ret_panel = &(ssd1306->base);
    ESP_LOGD(TAG, "new ssd1306 panel @%p", ssd1306);

    return ESP_OK;

err:
    if (ssd1306) {
        if (panel_dev_config->reset_gpio_num >= 0) {
            gpio_reset_pin(panel_dev_config->reset_gpio_num);
        }
        free(ssd1306);
    }
    return ret;
}

static esp_err_t panel_ssd1306_del(esp_lcd_panel_t *panel)
{
    ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
    if (ssd1306->reset_gpio_num >= 0) {
        gpio_reset_pin(ssd1306->reset_gpio_num);
    }
    ESP_LOGD(TAG, "del ssd1306 panel @%p", ssd1306);
    free(ssd1306);
    return ESP_OK;
}

static esp_err_t panel_ssd1306_reset(esp_lcd_panel_t *panel)
{
    ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);

    // perform hardware reset
    if (ssd1306->reset_gpio_num >= 0) {
        gpio_set_level(ssd1306->reset_gpio_num, ssd1306->reset_level);
        vTaskDelay(pdMS_TO_TICKS(10));
        gpio_set_level(ssd1306->reset_gpio_num, !ssd1306->reset_level);
        vTaskDelay(pdMS_TO_TICKS(10));
    }

    return ESP_OK;
}

static esp_err_t panel_ssd1306_init(esp_lcd_panel_t *panel)
{
    ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
    esp_lcd_panel_io_handle_t io = ssd1306->io;
    esp_lcd_panel_io_tx_param(io, SSD1306_CMD_DISP_OFF, NULL, 0);
    esp_lcd_panel_io_tx_param(io, SSD1306_CMD_SET_MEMORY_ADDR_MODE, (uint8_t[]) {
        0x00 // horizontal addressing mode
    }, 1);
    esp_lcd_panel_io_tx_param(io, SSD1306_CMD_SET_CHARGE_PUMP, (uint8_t[]) {
        0x14 // enable charge pump
    }, 1);
    esp_lcd_panel_io_tx_param(io, SSD1306_CMD_DISP_ON, NULL, 0);
    // SEG/COM will be ON after 100ms after sending DISP_ON command
    vTaskDelay(pdMS_TO_TICKS(100));
    return ESP_OK;
}

static esp_err_t panel_ssd1306_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data)
{
    ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
    assert((x_start < x_end) && (y_start < y_end) && "start position must be smaller than end position");
    esp_lcd_panel_io_handle_t io = ssd1306->io;
    // adding extra gap
    x_start += ssd1306->x_gap;
    x_end += ssd1306->x_gap;
    y_start += ssd1306->y_gap;
    y_end += ssd1306->y_gap;
    // one page contains 8 rows (COMs)
    uint8_t page_start = y_start / 8;
    uint8_t page_end = (y_end - 1) / 8;
    // define an area of frame memory where MCU can access
    esp_lcd_panel_io_tx_param(io, SSD1306_CMD_SET_COLUMN_RANGE, (uint8_t[]) {
        (x_start & 0x7F),
        ((x_end - 1) & 0x7F),
    }, 2);
    esp_lcd_panel_io_tx_param(io, SSD1306_CMD_SET_PAGE_RANGE, (uint8_t[]) {
        (page_start & 0x07),
        (page_end & 0x07),
    }, 2);
    // transfer frame buffer
    size_t len = (y_end - y_start) * (x_end - x_start) * ssd1306->bits_per_pixel / 8;
    esp_lcd_panel_io_tx_color(io, 0, color_data, len);

    return ESP_OK;
}

static esp_err_t panel_ssd1306_invert_color(esp_lcd_panel_t *panel, bool invert_color_data)
{
    ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
    esp_lcd_panel_io_handle_t io = ssd1306->io;
    int command = 0;
    if (invert_color_data) {
        command = SSD1306_CMD_INVERT_ON;
    } else {
        command = SSD1306_CMD_INVERT_OFF;
    }
    esp_lcd_panel_io_tx_param(io, command, NULL, 0);
    return ESP_OK;
}

static esp_err_t panel_ssd1306_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y)
{
    ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
    esp_lcd_panel_io_handle_t io = ssd1306->io;

    int command = 0;
    if (mirror_x) {
        command = SSD1306_CMD_MIRROR_X_ON;
    } else {
        command = SSD1306_CMD_MIRROR_X_OFF;
    }
    esp_lcd_panel_io_tx_param(io, command, NULL, 0);
    if (mirror_y) {
        command = SSD1306_CMD_MIRROR_Y_ON;
    } else {
        command = SSD1306_CMD_MIRROR_X_OFF;
    }
    esp_lcd_panel_io_tx_param(io, command, NULL, 0);
    return ESP_OK;
}

static esp_err_t panel_ssd1306_swap_xy(esp_lcd_panel_t *panel, bool swap_axes)
{
    return ESP_ERR_NOT_SUPPORTED;
}

static esp_err_t panel_ssd1306_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap)
{
    ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
    ssd1306->x_gap = x_gap;
    ssd1306->y_gap = y_gap;
    return ESP_OK;
}

static esp_err_t panel_ssd1306_disp_off(esp_lcd_panel_t *panel, bool off)
{
    ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
    esp_lcd_panel_io_handle_t io = ssd1306->io;
    int command = 0;
    if (off) {
        command = SSD1306_CMD_DISP_OFF;
    } else {
        command = SSD1306_CMD_DISP_ON;
    }
    esp_lcd_panel_io_tx_param(io, command, NULL, 0);
    return ESP_OK;
}