/* * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #ifndef __ESP_SNTP_H__ #define __ESP_SNTP_H__ #include "lwip/err.h" #include "lwip/ip.h" #ifdef __cplusplus extern "C" { #endif /* * The time update takes place in the sntp_sync_time() function. * The user has the ability to redefine this function in order * to re-define its functionality. This function has two time update modes, * which can be set via the sntp_set_sync_mode() function. * Two available modes are as follows: * - the first is an immediate update when receiving time from the sntp server, * - the second is a smooth time update (if the time error is no more than 35 minutes, * and an immediate update if the error is more than 35 minutes). * * To receive notification of time synchronization, * you can use the callback function or get the synchronization status * via the sntp_get_sync_status() function. * * To determine the time synchronization time on the device, you can use: * 1) sntp_set_time_sync_notification_cb() function to set the callback function, * which is convenient to use to receive notification of the update time. * 2) sntp_get_sync_status() function for getting time synchronization status. * After the time synchronization is completed, the status will be * SNTP_SYNC_STATUS_COMPLETED, after, it will be reseted to SNTP_SYNC_STATUS_RESET * to wait for the next sync cycle. */ /// Aliases for esp_sntp prefixed API (inherently thread safe) #define esp_sntp_sync_time sntp_sync_time #define esp_sntp_set_sync_mode sntp_set_sync_mode #define esp_sntp_get_sync_mode sntp_get_sync_mode #define esp_sntp_get_sync_status sntp_get_sync_status #define esp_sntp_set_sync_status sntp_set_sync_status #define esp_sntp_set_time_sync_notification_cb sntp_set_time_sync_notification_cb #define esp_sntp_set_sync_interval sntp_set_sync_interval #define esp_sntp_get_sync_interval sntp_get_sync_interval #define esp_sntp_restart sntp_restart #ifndef SNTP_OPMODE_POLL #define SNTP_OPMODE_POLL ESP_SNTP_OPMODE_POLL #else #warning "Defined!" #endif /* SNTP_OPMODE_POLL */ /// SNTP time update mode typedef enum { SNTP_SYNC_MODE_IMMED, /*!< Update system time immediately when receiving a response from the SNTP server. */ SNTP_SYNC_MODE_SMOOTH, /*!< Smooth time updating. Time error is gradually reduced using adjtime function. If the difference between SNTP response time and system time is large (more than 35 minutes) then update immediately. */ } sntp_sync_mode_t; /// SNTP sync status typedef enum { SNTP_SYNC_STATUS_RESET, // Reset status. SNTP_SYNC_STATUS_COMPLETED, // Time is synchronized. SNTP_SYNC_STATUS_IN_PROGRESS, // Smooth time sync in progress. } sntp_sync_status_t; /// SNTP operating modes per lwip SNTP module typedef enum { ESP_SNTP_OPMODE_POLL, ESP_SNTP_OPMODE_LISTENONLY, } esp_sntp_operatingmode_t; /** * @brief SNTP callback function for notifying about time sync event * * @param tv Time received from SNTP server. */ typedef void (*sntp_sync_time_cb_t) (struct timeval *tv); /** * @brief This function updates the system time. * * This is a weak-linked function. It is possible to replace all SNTP update functionality * by placing a sntp_sync_time() function in the app firmware source. * If the default implementation is used, calling sntp_set_sync_mode() allows * the time synchronization mode to be changed to instant or smooth. * If a callback function is registered via sntp_set_time_sync_notification_cb(), * it will be called following time synchronization. * * @param tv Time received from SNTP server. */ void sntp_sync_time(struct timeval *tv); /** * @brief Set the sync mode * * Modes allowed: SNTP_SYNC_MODE_IMMED and SNTP_SYNC_MODE_SMOOTH. * @param sync_mode Sync mode. */ void sntp_set_sync_mode(sntp_sync_mode_t sync_mode); /** * @brief Get set sync mode * * @return SNTP_SYNC_MODE_IMMED: Update time immediately. * SNTP_SYNC_MODE_SMOOTH: Smooth time updating. */ sntp_sync_mode_t sntp_get_sync_mode(void); /** * @brief Get status of time sync * * After the update is completed, the status will be returned as SNTP_SYNC_STATUS_COMPLETED. * After that, the status will be reset to SNTP_SYNC_STATUS_RESET. * If the update operation is not completed yet, the status will be SNTP_SYNC_STATUS_RESET. * If a smooth mode was chosen and the synchronization is still continuing (adjtime works), then it will be SNTP_SYNC_STATUS_IN_PROGRESS. * * @return SNTP_SYNC_STATUS_RESET: Reset status. * SNTP_SYNC_STATUS_COMPLETED: Time is synchronized. * SNTP_SYNC_STATUS_IN_PROGRESS: Smooth time sync in progress. */ sntp_sync_status_t sntp_get_sync_status(void); /** * @brief Set status of time sync * * @param sync_status status of time sync (see sntp_sync_status_t) */ void sntp_set_sync_status(sntp_sync_status_t sync_status); /** * @brief Set a callback function for time synchronization notification * * @param callback a callback function */ void sntp_set_time_sync_notification_cb(sntp_sync_time_cb_t callback); /** * @brief Set the sync interval of SNTP operation * * Note: SNTPv4 RFC 4330 enforces a minimum sync interval of 15 seconds. * This sync interval will be used in the next attempt update time throught SNTP. * To apply the new sync interval call the sntp_restart() function, * otherwise, it will be applied after the last interval expired. * * @param interval_ms The sync interval in ms. It cannot be lower than 15 seconds, otherwise 15 seconds will be set. */ void sntp_set_sync_interval(uint32_t interval_ms); /** * @brief Get the sync interval of SNTP operation * * @return the sync interval */ uint32_t sntp_get_sync_interval(void); /** * @brief Restart SNTP * * @return True - Restart * False - SNTP was not initialized yet */ bool sntp_restart(void); /** * @brief Sets SNTP operating mode. The mode has to be set before init. * * @param operating_mode Desired operating mode */ void esp_sntp_setoperatingmode(esp_sntp_operatingmode_t operating_mode); /** * @brief Init and start SNTP service */ void esp_sntp_init(void); /** * @brief Stops SNTP service */ void esp_sntp_stop(void); /** * @brief Sets SNTP server address * * @param idx Index of the server * @param addr IP address of the server */ void esp_sntp_setserver(u8_t idx, const ip_addr_t *addr); /** * @brief Sets SNTP hostname * @param idx Index of the server * @param server Name of the server */ void esp_sntp_setservername(u8_t idx, const char *server); /** * @brief Gets SNTP server name * @param idx Index of the server * @return Name of the server */ const char *esp_sntp_getservername(u8_t idx); /** * @brief Get SNTP server IP * @param idx Index of the server * @return IP address of the server */ const ip_addr_t* esp_sntp_getserver(u8_t idx); /** * @brief Checks if sntp is enabled * @return true if sntp module is enabled */ bool esp_sntp_enabled(void); #if LWIP_DHCP_GET_NTP_SRV /** * @brief Enable acquiring SNTP server from DHCP * @param enable True for enabling SNTP from DHCP */ void esp_sntp_servermode_dhcp(bool enable); #endif /* LWIP_DHCP_GET_NTP_SRV */ #if !defined(ESP_LWIP_COMPONENT_BUILD) && !defined(ESP_NETIF_COMPONENT_BUILD) /** * @brief if not build within lwip, provide translating inlines, * that will warn about thread safety */ static inline __attribute__((deprecated("use esp_sntp_setoperatingmode() instead"))) void sntp_setoperatingmode(u8_t operating_mode) { esp_sntp_setoperatingmode((esp_sntp_operatingmode_t)operating_mode); } static inline __attribute__((deprecated("use esp_sntp_servermode_dhcp() instead"))) void sntp_servermode_dhcp(int set_servers_from_dhcp) { #if LWIP_DHCP_GET_NTP_SRV esp_sntp_servermode_dhcp(set_servers_from_dhcp); #endif } static inline __attribute__((deprecated("use esp_sntp_setservername() instead"))) void sntp_setservername(u8_t idx, const char *server) { esp_sntp_setservername(idx, server); } static inline __attribute__((deprecated("use esp_sntp_init() instead"))) void sntp_init(void) { esp_sntp_init(); } static inline __attribute__((deprecated("use esp_sntp_getservername() instead"))) const char *sntp_getservername(u8_t idx) { return esp_sntp_getservername(idx); } static inline __attribute__((deprecated("use esp_sntp_getserver() instead"))) const ip_addr_t* sntp_getserver(u8_t idx) { return esp_sntp_getserver(idx); } #endif /* ESP_LWIP_COMPONENT_BUILD */ #ifdef __cplusplus } #endif #endif // __ESP_SNTP_H__