menu "SPI Flash driver" depends on !APP_BUILD_TYPE_PURE_RAM_APP config SPI_FLASH_VERIFY_WRITE bool "Verify SPI flash writes" depends on !SPI_FLASH_ROM_IMPL default n help If this option is enabled, any time SPI flash is written then the data will be read back and verified. This can catch hardware problems with SPI flash, or flash which was not erased before verification. config SPI_FLASH_LOG_FAILED_WRITE bool "Log errors if verification fails" depends on SPI_FLASH_VERIFY_WRITE default n help If this option is enabled, if SPI flash write verification fails then a log error line will be written with the address, expected & actual values. This can be useful when debugging hardware SPI flash problems. config SPI_FLASH_WARN_SETTING_ZERO_TO_ONE bool "Log warning if writing zero bits to ones" depends on SPI_FLASH_VERIFY_WRITE default n help If this option is enabled, any SPI flash write which tries to set zero bits in the flash to ones will log a warning. Such writes will not result in the requested data appearing identically in flash once written, as SPI NOR flash can only set bits to one when an entire sector is erased. After erasing, individual bits can only be written from one to zero. Note that some software (such as SPIFFS) which is aware of SPI NOR flash may write one bits as an optimisation, relying on the data in flash becoming a bitwise AND of the new data and any existing data. Such software will log spurious warnings if this option is enabled. config SPI_FLASH_ENABLE_COUNTERS bool "Enable operation counters" default n help This option enables the following APIs: - esp_flash_reset_counters - esp_flash_dump_counters - esp_flash_get_counters These APIs may be used to collect performance data for spi_flash APIs and to help understand behaviour of libraries which use SPI flash. config SPI_FLASH_ROM_DRIVER_PATCH bool "Enable SPI flash ROM driver patched functions" default y help Enable this flag to use patched versions of SPI flash ROM driver functions. This option should be enabled, if any one of the following is true: (1) need to write to flash on ESP32-D2WD; (2) main SPI flash is connected to non-default pins; (3) main SPI flash chip is manufactured by ISSI. config SPI_FLASH_ROM_IMPL bool "Use esp_flash implementation in ROM" depends on ESP_ROM_HAS_SPI_FLASH default n help Enable this flag to use new SPI flash driver functions from ROM instead of ESP-IDF. If keeping this as "n" in your project, you will have less free IRAM. But you can use all of our flash features. If making this as "y" in your project, you will increase free IRAM. But you may miss out on some flash features and support for new flash chips. Currently the ROM cannot support the following features: - SPI_FLASH_AUTO_SUSPEND (C3, S3) choice SPI_FLASH_DANGEROUS_WRITE bool "Writing to dangerous flash regions" default SPI_FLASH_DANGEROUS_WRITE_ALLOWED if APP_BUILD_TYPE_RAM default SPI_FLASH_DANGEROUS_WRITE_ABORTS help SPI flash APIs can optionally abort or return a failure code if erasing or writing addresses that fall at the beginning of flash (covering the bootloader and partition table) or that overlap the app partition that contains the running app. It is not recommended to ever write to these regions from an IDF app, and this check prevents logic errors or corrupted firmware memory from damaging these regions. Note that this feature *does not* check calls to the esp_rom_xxx SPI flash ROM functions. These functions should not be called directly from IDF applications. config SPI_FLASH_DANGEROUS_WRITE_ABORTS bool "Aborts" config SPI_FLASH_DANGEROUS_WRITE_FAILS bool "Fails" config SPI_FLASH_DANGEROUS_WRITE_ALLOWED bool "Allowed" endchoice config SPI_FLASH_SHARE_SPI1_BUS bool "Support other devices attached to SPI1 bus" default n depends on !IDF_TARGET_ESP32S2 help Each SPI bus needs a lock for arbitration among devices. This allows multiple devices on a same bus, but may reduce the speed of esp_flash driver access to the main flash chip. If you only need to use esp_flash driver to access the main flash chip, disable this option, and the lock will be bypassed on SPI1 bus. Otherwise if extra devices are needed to attach to SPI1 bus, enable this option. config SPI_FLASH_BYPASS_BLOCK_ERASE bool "Bypass a block erase and always do sector erase" default n help Some flash chips can have very high "max" erase times, especially for block erase (32KB or 64KB). This option allows to bypass "block erase" and always do sector erase commands. This will be much slower overall in most cases, but improves latency for other code to run. config SPI_FLASH_YIELD_DURING_ERASE bool "Enables yield operation during flash erase" default y help This allows to yield the CPUs between erase commands. Prevents starvation of other tasks. Please use this configuration together with ``SPI_FLASH_ERASE_YIELD_DURATION_MS`` and ``SPI_FLASH_ERASE_YIELD_TICKS`` after carefully checking flash datasheet to avoid a watchdog timeout. For more information, please check `SPI Flash API` reference documenation under section `OS Function`. config SPI_FLASH_ERASE_YIELD_DURATION_MS int "Duration of erasing to yield CPUs (ms)" depends on SPI_FLASH_YIELD_DURING_ERASE default 20 help If a duration of one erase command is large then it will yield CPUs after finishing a current command. config SPI_FLASH_ERASE_YIELD_TICKS int "CPU release time (tick) for an erase operation" depends on SPI_FLASH_YIELD_DURING_ERASE default 1 help Defines how many ticks will be before returning to continue a erasing. config SPI_FLASH_AUTO_SUSPEND bool "Auto suspend long erase/write operations (READ DOCS FIRST)" default n depends on IDF_TARGET_ESP32C3 && !SPI_FLASH_ROM_IMPL help This option is default n before ESP32-C3, because it needs bootloader support. CAUTION: If you want to OTA to an app with this feature turned on, please make sure the bootloader has the support for it. (later than IDF v4.3) Auto-suspend feature only supported by XMC chip. If you are using an official module, please contact Espressif Business support. Also reading auto suspend part in `SPI Flash API` document before you enable this function. config SPI_FLASH_WRITE_CHUNK_SIZE int "Flash write chunk size" default 8192 range 256 8192 help Flash write is broken down in terms of multiple (smaller) write operations. This configuration options helps to set individual write chunk size, smaller value here ensures that cache (and non-IRAM resident interrupts) remains disabled for shorter duration. config SPI_FLASH_SIZE_OVERRIDE bool "Override flash size in bootloader header by ESPTOOLPY_FLASHSIZE" default n help SPI Flash driver uses the flash size configured in bootloader header by default. Enable this option to override flash size with latest ESPTOOLPY_FLASHSIZE value from the app header if the size in the bootloader header is incorrect. config SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED bool "Flash timeout checkout disabled" default n help This option is helpful if you are using a flash chip whose timeout is quite large or unpredictable. config SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST bool "Override default chip driver list" default n help This option allows the chip driver list to be customized, instead of using the default list provided by ESP-IDF. When this option is enabled, the default list is no longer compiled or linked. Instead, the `default_registered_chips` structure must be provided by the user. See example: custom_chip_driver under examples/storage for more details. menu "SPI Flash behavior when brownout" config SPI_FLASH_BROWNOUT_RESET_XMC bool "Enable sending reset when brownout for XMC flash chips" default y select SPI_FLASH_BROWNOUT_RESET help When this option is selected, the patch will be enabled for XMC. Follow the recommended flow by XMC for better stability. DO NOT DISABLE UNLESS YOU KNOW WHAT YOU ARE DOING. config SPI_FLASH_BROWNOUT_RESET bool default y select ESP_SYSTEM_BROWNOUT_INTR help When brownout happens during flash erase/write operations, send reset command to stop the flash operations to improve stability. endmenu menu "Auto-detect flash chips" visible if !SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST orsource "./$IDF_TARGET/Kconfig.soc_caps.in" config SPI_FLASH_SUPPORT_ISSI_CHIP bool "ISSI" default y if SPI_FLASH_VENDOR_ISSI_SUPPORTED default n help Enable this to support auto detection of ISSI chips if chip vendor not directly given by ``chip_drv`` member of the chip struct. This adds support for variant chips, however will extend detecting time. config SPI_FLASH_SUPPORT_MXIC_CHIP bool "MXIC" default y if SPI_FLASH_VENDOR_MXIC_SUPPORTED default n help Enable this to support auto detection of MXIC chips if chip vendor not directly given by ``chip_drv`` member of the chip struct. This adds support for variant chips, however will extend detecting time. config SPI_FLASH_SUPPORT_GD_CHIP bool "GigaDevice" default y if SPI_FLASH_VENDOR_GD_SUPPORTED default n help Enable this to support auto detection of GD (GigaDevice) chips if chip vendor not directly given by ``chip_drv`` member of the chip struct. If you are using Wrover modules, please don't disable this, otherwise your flash may not work in 4-bit mode. This adds support for variant chips, however will extend detecting time and image size. Note that the default chip driver supports the GD chips with product ID 60H. config SPI_FLASH_SUPPORT_WINBOND_CHIP bool "Winbond" default y if SPI_FLASH_VENDOR_WINBOND_SUPPORTED default n help Enable this to support auto detection of Winbond chips if chip vendor not directly given by ``chip_drv`` member of the chip struct. This adds support for variant chips, however will extend detecting time. config SPI_FLASH_SUPPORT_BOYA_CHIP bool "BOYA" # ESP32 doens't usually use this chip, default n to save iram. default y if SPI_FLASH_VENDOR_BOYA_SUPPORTED default n help Enable this to support auto detection of BOYA chips if chip vendor not directly given by ``chip_drv`` member of the chip struct. This adds support for variant chips, however will extend detecting time. config SPI_FLASH_SUPPORT_TH_CHIP bool "TH" # ESP32 doens't usually use this chip, default n to save iram. default y if SPI_FLASH_VENDOR_TH_SUPPORTED default n help Enable this to support auto detection of TH chips if chip vendor not directly given by ``chip_drv`` member of the chip struct. This adds support for variant chips, however will extend detecting time. config SPI_FLASH_SUPPORT_MXIC_OPI_CHIP bool "mxic (opi)" depends on IDF_TARGET_ESP32S3 default y help Enable this to support auto detection of Octal MXIC chips if chip vendor not directly given by ``chip_drv`` member of the chip struct. This adds support for variant chips, however will extend detecting time. endmenu #auto detect flash chips config SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE bool "Enable encrypted partition read/write operations" default y help This option enables flash read/write operations to encrypted partition/s. This option is kept enabled irrespective of state of flash encryption feature. However, in case application is not using flash encryption feature and is in need of some additional memory from IRAM region (~1KB) then this config can be disabled. config SPI_FLASH_HPM_ENABLE bool default n help This option is invisible, and will be selected automatically when ``ESPTOOLPY_FLASHFREQ_120M`` is selected. config SPI_FLASH_32BIT_ADDRESS bool default y if ESPTOOLPY_FLASHSIZE_32MB || ESPTOOLPY_FLASHSIZE_64MB || ESPTOOLPY_FLASHSIZE_128MB default n help This is a helper config for 32bits address flash. Invisible for users. config SPI_FLASH_32BIT_ADDR_ENABLE bool "Enable 32-bit-address (over 16MB) SPI Flash access" depends on SPI_FLASH_32BIT_ADDRESS && !ESPTOOLPY_OCT_FLASH && IDF_TARGET_ESP32S3 && IDF_EXPERIMENTAL_FEATURES default n help Enabling this option allows the CPU to access 32-bit-address flash beyond 16M range. 1. This option only valid for 4-line flash. Octal flash doesn't need this. 2. This option is experimental, which means it can't use on all flash chips stable, for more information, please contact Espressif Business support. endmenu