/* * SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #include "sdkconfig.h" #include #include #include "esp_log.h" #include "test_utils.h" #if !TEMPORARY_DISABLED_FOR_TARGETS(ESP8684) // TODO: Support ADC IDF-3908 #include "esp_adc_cal.h" #include "driver/adc.h" static const char *TAG = "ADC"; #if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32, ESP32S2, ESP32S3, ESP32C3) //TODO: IDF-3160 //API only supported for C3 now. #include "esp_adc_cal.h" #include "esp_log.h" #define TEST_COUNT 4096 #define MAX_ARRAY_SIZE 4096 #define TEST_ATTEN ADC_ATTEN_MAX //Set to ADC_ATTEN_*db to test a single attenuation only static int s_adc_count[MAX_ARRAY_SIZE]={}; static int s_adc_offset = -1; static int insert_point(uint32_t value) { const bool fixed_size = true; if (s_adc_offset < 0) { if (fixed_size) { TEST_ASSERT_GREATER_OR_EQUAL(4096, MAX_ARRAY_SIZE); s_adc_offset = 0; //Fixed to 0 because the array can hold all the data in 12 bits } else { s_adc_offset = MAX((int)value - MAX_ARRAY_SIZE/2, 0); } } if (!fixed_size && (value < s_adc_offset || value >= s_adc_offset + MAX_ARRAY_SIZE)) { TEST_ASSERT_GREATER_OR_EQUAL(s_adc_offset, value); TEST_ASSERT_LESS_THAN(s_adc_offset + MAX_ARRAY_SIZE, value); } s_adc_count[value - s_adc_offset] ++; return value - s_adc_offset; } static void reset_array(void) { memset(s_adc_count, 0, sizeof(s_adc_count)); s_adc_offset = -1; } static uint32_t get_average(void) { uint32_t sum = 0; int count = 0; for (int i = 0; i < MAX_ARRAY_SIZE; i++) { sum += s_adc_count[i] * (s_adc_offset+i); count += s_adc_count[i]; } return sum/count; } static void print_summary(bool figure) { const int MAX_WIDTH=20; int max_count = 0; int start = -1; int end = -1; uint32_t sum = 0; int count = 0; for (int i = 0; i < MAX_ARRAY_SIZE; i++) { if (s_adc_count[i] > max_count) { max_count = s_adc_count[i]; } if (s_adc_count[i] > 0 && start < 0) { start = i; } if (s_adc_count[i] > 0) { end = i; } count += s_adc_count[i]; sum += s_adc_count[i] * (s_adc_offset+i); } if (figure) { for (int i = start; i <= end; i++) { printf("%4d ", i+s_adc_offset); int count = s_adc_count[i] * MAX_WIDTH / max_count; for (int j = 0; j < count; j++) { putchar('|'); } printf(" %d\n", s_adc_count[i]); } } float average = (float)sum/count; float variation_square = 0; for (int i = start; i <= end; i ++) { if (s_adc_count[i] == 0) { continue; } float delta = i + s_adc_offset - average; variation_square += (delta * delta) * s_adc_count[i]; } printf("%d points.\n", count); printf("average: %.1f\n", (float)sum/count); printf("std: %.2f\n", sqrt(variation_square/count)); } static void continuous_adc_init(uint16_t adc1_chan_mask, uint16_t adc2_chan_mask, adc_channel_t *channel, uint8_t channel_num, adc_atten_t atten) { adc_digi_init_config_t adc_dma_config = { .max_store_buf_size = TEST_COUNT*2, .conv_num_each_intr = 128, .adc1_chan_mask = adc1_chan_mask, .adc2_chan_mask = adc2_chan_mask, }; TEST_ESP_OK(adc_digi_initialize(&adc_dma_config)); adc_digi_pattern_table_t adc_pattern[10] = {0}; adc_digi_config_t dig_cfg = { .conv_limit_en = 0, .conv_limit_num = 250, .sample_freq_hz = 83333, }; dig_cfg.adc_pattern_len = channel_num; for (int i = 0; i < channel_num; i++) { uint8_t unit = ((channel[i] >> 3) & 0x1); uint8_t ch = channel[i] & 0x7; adc_pattern[i].atten = atten; adc_pattern[i].channel = ch; adc_pattern[i].unit = unit; } dig_cfg.adc_pattern = adc_pattern; TEST_ESP_OK(adc_digi_controller_config(&dig_cfg)); } TEST_CASE("test_adc_dma", "[adc][ignore][manual]") { uint16_t adc1_chan_mask = BIT(2); uint16_t adc2_chan_mask = 0; adc_channel_t channel[1] = {ADC1_CHANNEL_2}; adc_atten_t target_atten = TEST_ATTEN; const int output_data_size = sizeof(adc_digi_output_data_t); int buffer_size = TEST_COUNT*output_data_size; uint8_t* read_buf = malloc(buffer_size); TEST_ASSERT_NOT_NULL(read_buf); adc_atten_t atten; bool print_figure; if (target_atten == ADC_ATTEN_MAX) { atten = ADC_ATTEN_DB_0; target_atten = ADC_ATTEN_DB_11; print_figure = false; } else { atten = target_atten; print_figure = true; } while (1) { ESP_LOGI("TEST_ADC", "Test with atten: %d", atten); memset(read_buf, 0xce, buffer_size); bool do_calibration = false; esp_adc_cal_characteristics_t chan1_char = {}; esp_adc_cal_value_t cal_ret = esp_adc_cal_characterize(ADC_UNIT_1, atten, ADC_WIDTH_12Bit, 0, &chan1_char); if (cal_ret == ESP_ADC_CAL_VAL_EFUSE_TP) { do_calibration = true; } continuous_adc_init(adc1_chan_mask, adc2_chan_mask, channel, sizeof(channel) / sizeof(adc_channel_t), atten); adc_digi_start(); int remain_count = TEST_COUNT; while (remain_count) { int already_got = TEST_COUNT - remain_count; uint32_t ret_num; TEST_ESP_OK(adc_digi_read_bytes(read_buf + already_got*output_data_size, remain_count*output_data_size, &ret_num, ADC_MAX_DELAY)); TEST_ASSERT((ret_num % output_data_size) == 0); remain_count -= ret_num / output_data_size; } adc_digi_output_data_t *p = (void*)read_buf; reset_array(); for (int i = 0; i < TEST_COUNT; i++) { insert_point(p[i].type2.data); } print_summary(print_figure); if (do_calibration) { uint32_t raw = get_average(); uint32_t voltage_mv = esp_adc_cal_raw_to_voltage(raw, &chan1_char); printf("Voltage = %d mV\n", voltage_mv); } adc_digi_stop(); TEST_ESP_OK(adc_digi_deinitialize()); if (atten == target_atten) { break; } atten++; } free(read_buf); } TEST_CASE("test_adc_single", "[adc][ignore][manual]") { adc_atten_t target_atten = TEST_ATTEN; adc_atten_t atten; bool print_figure; if (target_atten == ADC_ATTEN_MAX) { atten = ADC_ATTEN_DB_0; target_atten = ADC_ATTEN_DB_11; print_figure = false; } else { atten = target_atten; print_figure = true; } adc1_config_width(ADC_WIDTH_BIT_12); while (1) { ESP_LOGI("TEST_ADC", "Test with atten: %d", atten); adc1_config_channel_atten(ADC1_CHANNEL_2, atten); bool do_calibration = false; esp_adc_cal_characteristics_t chan1_char = {}; esp_adc_cal_value_t cal_ret = esp_adc_cal_characterize(ADC_UNIT_1, atten, ADC_WIDTH_12Bit, 0, &chan1_char); if (cal_ret == ESP_ADC_CAL_VAL_EFUSE_TP) { do_calibration = true; } const int test_count = TEST_COUNT; adc1_channel_t channel = ADC1_CHANNEL_2; while (1) { reset_array(); for (int i = 0; i < test_count; i++) { uint32_t raw = adc1_get_raw(channel); insert_point(raw); } print_summary(print_figure); break; } if (do_calibration) { uint32_t raw = get_average(); uint32_t voltage_mv = esp_adc_cal_raw_to_voltage(raw, &chan1_char); printf("Voltage = %d mV\n", voltage_mv); } if (atten == target_atten) { break; } atten++; } } #endif //#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32, ESP32S2, ESP32S3) /******************************************************************************** * ADC Speed Related Tests ********************************************************************************/ #ifdef CONFIG_IDF_TARGET_ESP32 #define CPU_FREQ_MHZ CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ #elif CONFIG_IDF_TARGET_ESP32S2 #define CPU_FREQ_MHZ CONFIG_ESP32S2_DEFAULT_CPU_FREQ_MHZ #elif CONFIG_IDF_TARGET_ESP32S3 #define CPU_FREQ_MHZ CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ #elif CONFIG_IDF_TARGET_ESP32C3 #define CPU_FREQ_MHZ CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ #endif #define RECORD_TIME_PREPARE() uint32_t __t1, __t2 #define RECORD_TIME_START() do {__t1 = esp_cpu_get_ccount();}while(0) #define RECORD_TIME_END(p_time) do{__t2 = esp_cpu_get_ccount(); *p_time = (__t2-__t1);}while(0) #define GET_US_BY_CCOUNT(t) ((double)t/CPU_FREQ_MHZ) //ADC Channels #if CONFIG_IDF_TARGET_ESP32 #define ADC1_CALI_TEST_CHAN0 ADC1_CHANNEL_6 #define ADC2_CALI_TEST_CHAN0 ADC2_CHANNEL_0 #else #define ADC1_CALI_TEST_CHAN0 ADC1_CHANNEL_2 #define ADC2_CALI_TEST_CHAN0 ADC2_CHANNEL_0 #endif //ADC Calibration #if CONFIG_IDF_TARGET_ESP32 #define ADC_TEST_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_VREF #elif CONFIG_IDF_TARGET_ESP32S2 #define ADC_TEST_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP #elif CONFIG_IDF_TARGET_ESP32C3 #define ADC_TEST_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP #elif CONFIG_IDF_TARGET_ESP32S3 #define ADC_TEST_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP_FIT #endif #define TIMES_PER_ATTEN 10 static esp_adc_cal_characteristics_t adc1_chars; static esp_adc_cal_characteristics_t adc2_chars; static void adc_single_cali_init(adc_unit_t adc_n, adc_channel_t chan, uint32_t atten) { esp_err_t ret; esp_adc_cal_value_t ret_val = ESP_ADC_CAL_VAL_NOT_SUPPORTED; ret = esp_adc_cal_check_efuse(ADC_TEST_CALI_SCHEME); if (ret == ESP_ERR_NOT_SUPPORTED) { ESP_LOGE(TAG, "Cali scheme not supported!"); TEST_ASSERT(ret != ESP_ERR_NOT_SUPPORTED); } else if (ret != ESP_OK) { ESP_LOGW(TAG, "No cali eFuse, but will run the test"); } if (adc_n == ADC_UNIT_1) { ret_val = esp_adc_cal_characterize(adc_n, atten, ADC_WIDTH_BIT_DEFAULT, 0, &adc1_chars); TEST_ESP_OK(adc1_config_width(ADC_WIDTH_BIT_DEFAULT)); TEST_ESP_OK(adc1_config_channel_atten((adc1_channel_t)chan, atten)); } else if (adc_n == ADC_UNIT_2) { TEST_ESP_OK(adc2_config_channel_atten((adc2_channel_t)chan, atten)); ret_val = esp_adc_cal_characterize(adc_n, atten, ADC_WIDTH_BIT_DEFAULT, 0, &adc2_chars); } if (ret_val == ESP_ADC_CAL_VAL_NOT_SUPPORTED) { ESP_LOGW(TAG, "No cali eFuse, or invalid arg, but will run the test"); } ESP_LOGI(TAG, "ADC%d, channel%d, atten%d", adc_n, chan, atten); } static IRAM_ATTR NOINLINE_ATTR uint32_t get_cali_time_in_ccount(uint32_t adc_raw, esp_adc_cal_characteristics_t *chars) { uint32_t time; RECORD_TIME_PREPARE(); RECORD_TIME_START(); esp_adc_cal_raw_to_voltage(adc_raw, chars); RECORD_TIME_END(&time); return time; } TEST_CASE("test_adc_single_cali_time", "[adc][ignore][manual]") { ESP_LOGI(TAG, "CPU FREQ is %dMHz", CPU_FREQ_MHZ); uint32_t adc1_time_record[4][TIMES_PER_ATTEN] = {}; uint32_t adc2_time_record[4][TIMES_PER_ATTEN] = {}; int adc1_raw = 0; int adc2_raw = 0; //atten0 ~ atten3 for (int i = 0; i < 4; i++) { ESP_LOGI(TAG, "----------------atten%d----------------", i); adc_single_cali_init(ADC_UNIT_1, ADC1_CALI_TEST_CHAN0, i); adc_single_cali_init(ADC_UNIT_2, ADC2_CALI_TEST_CHAN0, i); for (int j = 0; j < TIMES_PER_ATTEN; j++) { adc1_raw = adc1_get_raw(ADC1_CALI_TEST_CHAN0); TEST_ESP_OK(adc2_get_raw(ADC2_CALI_TEST_CHAN0, ADC_WIDTH_BIT_DEFAULT, &adc2_raw)); adc1_time_record[i][j] = get_cali_time_in_ccount(adc1_raw, &adc1_chars); adc2_time_record[i][j] = get_cali_time_in_ccount(adc2_raw, &adc2_chars); IDF_LOG_PERFORMANCE("ADC1 Cali time", "%d us", (int)GET_US_BY_CCOUNT(adc1_time_record[i][j])); IDF_LOG_PERFORMANCE("ADC2 Cali time", "%d us", (int)GET_US_BY_CCOUNT(adc2_time_record[i][j])); } } } #endif //#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP8684)