config SPIRAM
    bool "Support for external, SPI-connected RAM"
    default "n"
    help
        This enables support for an external SPI RAM chip, connected in parallel with the
        main SPI flash chip.

menu "SPI RAM config"
    depends on SPIRAM

    choice SPIRAM_MODE
        prompt "Mode (QUAD/OCT) of SPI RAM chip in use"
        default SPIRAM_MODE_QUAD

        config SPIRAM_MODE_QUAD
            bool "Quad Mode PSRAM"

        config SPIRAM_MODE_OCT
            bool "Octal Mode PSRAM"
    endchoice

    choice SPIRAM_TYPE
        prompt "Type of SPIRAM chip in use"
        default SPIRAM_TYPE_AUTO

        config SPIRAM_TYPE_AUTO
            bool "Auto-detect"

        config SPIRAM_TYPE_ESPPSRAM16
            bool "ESP-PSRAM16 or APS1604"
            depends on SPIRAM_MODE_QUAD

        config SPIRAM_TYPE_ESPPSRAM32
            bool "ESP-PSRAM32"
            depends on SPIRAM_MODE_QUAD

        config SPIRAM_TYPE_ESPPSRAM64
            bool "ESP-PSRAM64 , LY68L6400 or APS6408"
    endchoice

    config SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY
        bool "Allow external memory as an argument to xTaskCreateStatic"
        default y
        help
            Accessing memory in SPIRAM has certain restrictions, so task stacks allocated by xTaskCreate
            are by default allocated from internal RAM.

            This option allows for passing memory allocated from SPIRAM to be passed to xTaskCreateStatic.
            This should only be used for tasks where the stack is never accessed while the cache is disabled.
            Cannot be used together with ESP_COREDUMP_ENABLE_TO_FLASH.

    menu "PSRAM Clock and CS IO for ESP32S3"
        depends on SPIRAM
        config DEFAULT_PSRAM_CLK_IO
            int "PSRAM CLK IO number"
            range 0 33
            default 30
            help
                The PSRAM Clock IO can be any unused GPIO, please refer to your hardware design.

        config DEFAULT_PSRAM_CS_IO
            int "PSRAM CS IO number"
            range 0 33
            default 26
            help
                The PSRAM CS IO can be any unused GPIO, please refer to your hardware design.
    endmenu
    config SPIRAM_FETCH_INSTRUCTIONS
        bool "Cache fetch instructions from SPI RAM"
        default n
        help
            If enabled, instruction in flash will be copied into SPIRAM.
            If SPIRAM_RODATA also enabled, you can run the instruction when erasing or programming the flash.

    config SPIRAM_RODATA
        bool "Cache load read only data from SPI RAM"
        default n
        help
            If enabled, rodata in flash will be copied into SPIRAM.
            If SPIRAM_FETCH_INSTRUCTIONS is also enabled,
            you can run the instruction when erasing or programming the flash.

    choice SPIRAM_SPEED
        prompt "Set RAM clock speed"
        default SPIRAM_SPEED_40M
        help
            Select the speed for the SPI RAM chip.

        config SPIRAM_SPEED_120M
            depends on SPIRAM_MODE_QUAD
            bool "120MHz clock speed"
        config SPIRAM_SPEED_80M
            bool "80MHz clock speed"
        config SPIRAM_SPEED_40M
            bool "40Mhz clock speed"
    endchoice

    config SPIRAM_SPEED
        int
        default 120 if SPIRAM_SPEED_120M
        default 80 if SPIRAM_SPEED_80M
        default 40 if SPIRAM_SPEED_40M

    source "$IDF_PATH/components/esp_psram/Kconfig.spiram.common"    # insert non-chip-specific items here

endmenu