| Supported Targets | ESP32 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 | | ----------------- | ----- | -------- | -------- | -------- | -------- | # Mesh IP Internal Networking example This example demonstrates how to use mesh to create a IP capable sub-network. As a demonstration all nodes publish their IP and their internal mesh layer to MQTT broker and uses internal communication at the same time ## Functionality This example uses experimental NAT feature to translate addresses/ports from an internal subnet, that is created by the root node running a DHCP server. At the same time, the nodes communicate using low level mesh send/receive API to exchange data, such as routing table from root to all nodes and an event notification from one node to all other nodes in the mesh. As a demonstration, the same event is also published at the mqtt broker on a subscribed topic, so both internal mesh_recv() notification as well as mqtt data event are to be received. ### Hardware Required This example can be executed on any platform board, the only required interface is WiFi and connection to internet. ### Configure the project Open the project configuration menu (`idf.py menuconfig`) to configure the mesh network channel, router SSID, router password and mesh softAP settings. ### Build and Flash Build the project and flash it to multiple boards forming a mesh network, then run monitor tool to view serial output: ``` idf.py -p PORT flash monitor ``` (To exit the serial monitor, type ``Ctrl-]``.) See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects. ## Example Output ### Output sample from mesh node ``` I (7749) mesh_main: state:0 I (7749) mesh_main: root address:24:0a:c4:09:88:5d I (7899) wifi:AP's beacon interval = 307200 us, DTIM period = 2 I (8809) mesh_main: IP:10.0.0.3 I (8819) mesh_main: Tried to publish layer:2 IP:10.0.0.3 I (8819) mesh_mqtt: Other event id:7 I (9189) MQTT_CLIENT: Sending MQTT CONNECT message, type: 1, id: 0000 I (9469) mesh_mqtt: MQTT_EVENT_CONNECTED I (9569) mesh_mqtt: sent publish returned msg_id=42728 I (9839) mesh_mqtt: MQTT_EVENT_SUBSCRIBED, msg_id=60327 I (9919) mesh_mqtt: MQTT_EVENT_PUBLISHED, msg_id=42728 ... I (1218786) MESH_MQTT: sent publish returned msg_id=13978 W (1218836) mesh_main: Key pressed! I (1218836) MESH_MQTT: sent publish returned msg_id=15808 I (1218846) mesh_main: Sending to [0] 30:ae:a4:80:5b:18: sent with err code: 0 I (1218906) MESH_MQTT: MQTT_EVENT_PUBLISHED, msg_id=13978 I (1219016) MESH_MQTT: MQTT_EVENT_PUBLISHED, msg_id=15808 I (1219366) MESH_MQTT: MQTT_EVENT_DATA TOPIC=/topic/ip_mesh/key_pressed DATA=24:0a:c4:09:88:5c I (1220036) mesh_main: Received Routing table [0] 30:ae:a4:80:5b:18 I (1220036) mesh_main: Received Routing table [1] 24:0a:c4:09:88:5c ``` ### Output sample from the root node ``` I (11957) mesh_main: state:0 I (11967) mesh_main: root address:24:0a:c4:09:88:5d I (11967) wifi:AP's beacon interval = 102400 us, DTIM period = 3 I (12767) esp_netif_handlers: sta ip: 192.168.2.3, mask: 255.255.255.0, gw: 192.168.2.1 I (12767) mesh_main: IP:192.168.2.3 ... I (1253864) mesh_main: Received Routing table [0] 30:ae:a4:80:5b:18 I (1253864) mesh_main: Received Routing table [1] 24:0a:c4:09:88:5c I (1253874) mesh_main: Sending routing table to [0] 30:ae:a4:80:5b:18: sent with err code: 0 I (1253884) mesh_main: Sending routing table to [1] 24:0a:c4:09:88:5c: sent with err code: 0 I (1253974) MESH_MQTT: MQTT_EVENT_PUBLISHED, msg_id=18126 W (1254714) mesh_main: Keypressed detected on node: 24:0a:c4:09:88:5c I (1254814) MESH_MQTT: MQTT_EVENT_DATA TOPIC=/topic/ip_mesh/key_pressed DATA=24:0a:c4:09:88:5c ```