/*
 * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */
/**
 *                    ESP32-S3 Linker Script Memory Layout
 * This file describes the memory layout (memory blocks) by virtual memory addresses.
 * This linker script is passed through the C preprocessor to include configuration options.
 * Please use preprocessor features sparingly!
 * Restrict to simple macros with numeric values, and/or #if/#endif blocks.
 */

#include "sdkconfig.h"
#include "ld.common"

/*
 * 40370000 <- IRAM/Icache -> 40378000 <- D/IRAM (I) -> 403E0000
 *                            3FC88000 <- D/IRAM (D) -> 3FCF0000 <- DRAM/DCache -> 3FD00000
 *
 * Startup code uses the IRAM from 0x403B9000 to 0x403E0000, which is not available for static
 * memory, but can only be used after app starts.
 *
 * D cache use the memory from high address, so when it's configured to 16K/32K, the region
 * 0x3FCF000 ~ (3FD00000 - DATA_CACHE_SIZE) should be available. This region is not used as
 * static memory, leaving to the heap.
 */

#define SRAM_IRAM_START     0x40370000
#define SRAM_DIRAM_I_START  0x40378000
#define SRAM_IRAM_END       0x403CB700 /* Please refer to ESP32-S3 bootloader.ld for more information on this */
#define I_D_SRAM_OFFSET     (SRAM_DIRAM_I_START - SRAM_DRAM_START)

#define SRAM_DRAM_START     0x3FC88000
#define SRAM_DRAM_END       (SRAM_IRAM_END - I_D_SRAM_OFFSET)  /* 2nd stage bootloader iram_loader_seg start address */
#define I_D_SRAM_SIZE       (SRAM_DRAM_END - SRAM_DRAM_START)


#define ICACHE_SIZE         0x8000
#define SRAM_IRAM_ORG       (SRAM_IRAM_START + CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE)
#define SRAM_IRAM_SIZE      (I_D_SRAM_SIZE + ICACHE_SIZE - CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE)

#define DCACHE_SIZE         0x10000
#define SRAM_DRAM_ORG       (SRAM_DRAM_START)

#if CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE
ASSERT((CONFIG_ESP32S3_FIXED_STATIC_RAM_SIZE <= I_D_SRAM_SIZE), "Fixed static ram data does not fit.")
#define DRAM0_0_SEG_LEN CONFIG_ESP32S3_FIXED_STATIC_RAM_SIZE
#else
#define DRAM0_0_SEG_LEN I_D_SRAM_SIZE
#endif // CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE

MEMORY
{
  /**
   *  All these values assume the flash cache is on, and have the blocks this uses subtracted from the length
   *  of the various regions. The 'data access port' dram/drom regions map to the same iram/irom regions but
   *  are connected to the data port of the CPU and eg allow byte-wise access.
   */

  /* IRAM for PRO CPU. */
  iram0_0_seg (RX) :                 org = SRAM_IRAM_ORG, len = SRAM_IRAM_SIZE

#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
  /* Flash mapped instruction data */
  iram0_2_seg (RX) :                 org = 0x42000020, len = 0x800000-0x20

  /**
   * (0x20 offset above is a convenience for the app binary image generation.
   * Flash cache has 64KB pages. The .bin file which is flashed to the chip
   * has a 0x18 byte file header, and each segment has a 0x08 byte segment
   * header. Setting this offset makes it simple to meet the flash cache MMU's
   * constraint that (paddr % 64KB == vaddr % 64KB).)
   */
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS

  /**
   * Shared data RAM, excluding memory reserved for ROM bss/data/stack.
   * Enabling Bluetooth & Trace Memory features in menuconfig will decrease the amount of RAM available.
   */
  dram0_0_seg (RW) :                 org = SRAM_DRAM_ORG, len = DRAM0_0_SEG_LEN

#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
  /* Flash mapped constant data */
  drom0_0_seg (R) :                  org = 0x3C000020, len = 0x2000000-0x20

  /* (See iram0_2_seg for meaning of 0x20 offset in the above.) */
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS

  /**
   * RTC fast memory (executable). Persists over deep sleep.
   */
  rtc_iram_seg(RWX) :                org = 0x600fe000, len = 0x2000 - RESERVE_RTC_MEM

  /* We reduced the size of rtc_iram_seg by RESERVE_RTC_MEM value.
     It reserves the amount of RTC fast memory that we use for this memory segment.
     This segment is intended for keeping:
       - (lower addr) rtc timer data (s_rtc_timer_retain_mem, see esp_clk.c files).
       - (higher addr) bootloader rtc data (s_bootloader_retain_mem, when a Kconfig option is on).
     The aim of this is to keep data that will not be moved around and have a fixed address.
  */
  rtc_reserved_seg(RW) :             org = 0x600fe000 + 0x2000 - RESERVE_RTC_MEM, len = RESERVE_RTC_MEM

  /**
   * RTC slow memory (data accessible). Persists over deep sleep.
   * Start of RTC slow memory is reserved for ULP co-processor code + data, if enabled.
   */
#if CONFIG_ULP_COPROC_ENABLED
  rtc_slow_seg(RW)  :                org = 0x50000000 + CONFIG_ULP_COPROC_RESERVE_MEM,
                                     len = 0x2000 - CONFIG_ULP_COPROC_RESERVE_MEM
#else
  rtc_slow_seg(RW)  :                org = 0x50000000 , len = 0x2000
#endif // CONFIG_ULP_COPROC_ENABLED
  /**
   * `extern_ram_seg` and `drom0_0_seg` share the same bus and the address region.
   * A dummy section is used to avoid overlap. See `.ext_ram.dummy` in `sections.ld.in`
   */
  extern_ram_seg(RWX) :              org = 0x3c000020 , len = 0x2000000-0x20
}

_diram_i_start = SRAM_DIRAM_I_START;

#if CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE
/* static data ends at defined address */
_heap_start = SRAM_DRAM_ORG + DRAM0_0_SEG_LEN;
#else
_heap_start = _heap_low_start;
#endif // CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE

/* Heap ends at top of dram0_0_seg */
_heap_end = 0x40000000;

_data_seg_org = ORIGIN(rtc_data_seg);


/* RTC fast memory shares the same range for both data and instructions */
REGION_ALIAS("rtc_data_seg", rtc_iram_seg );

#if CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM
REGION_ALIAS("rtc_data_location", rtc_data_seg );
#else
REGION_ALIAS("rtc_data_location", rtc_slow_seg );
#endif // CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM

#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
REGION_ALIAS("default_code_seg", iram0_2_seg);
#else
REGION_ALIAS("default_code_seg", iram0_0_seg);
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS

#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
REGION_ALIAS("default_rodata_seg", drom0_0_seg);
#else
REGION_ALIAS("default_rodata_seg", dram0_0_seg);
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS

/**
 *  If rodata default segment is placed in `drom0_0_seg`, then flash's first rodata section must
 *  also be first in the segment.
 */
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
  ASSERT(_flash_rodata_dummy_start == ORIGIN(default_rodata_seg),
         ".flash_rodata_dummy section must be placed at the beginning of the rodata segment.")
#endif