/****************************************************************************** * * Copyright (C) 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * This file contains functions that interface with the HCI transport. On * the receive side, it routes events to the appropriate handler, e.g. * L2CAP, ScoMgr. On the transmit side, it manages the command * transmission. * ******************************************************************************/ //#define LOG_TAG "bt_btu_hcif" //#include #include #include "stack/bt_types.h" #include "stack/hcimsgs.h" #include "stack/btu.h" #include "l2c_int.h" #include "stack/btm_api.h" #include "btm_int.h" //#include "bt_utils.h" #include "device/controller.h" #include "osi/osi.h" #include "hci/hci_layer.h" #include "common/bt_trace.h" #include "osi/thread.h" //#include "osi/mutex.h" // TODO(zachoverflow): remove this horrible hack #include "stack/btu.h" extern void btm_process_cancel_complete(UINT8 status, UINT8 mode); extern void btm_ble_test_command_complete(UINT8 *p); /********************************************************************************/ /* L O C A L F U N C T I O N P R O T O T Y P E S */ /********************************************************************************/ static void btu_hcif_inquiry_comp_evt (UINT8 *p); static void btu_hcif_inquiry_result_evt (UINT8 *p); static void btu_hcif_inquiry_rssi_result_evt (UINT8 *p); static void btu_hcif_extended_inquiry_result_evt (UINT8 *p); static void btu_hcif_connection_comp_evt (UINT8 *p); static void btu_hcif_connection_request_evt (UINT8 *p); static void btu_hcif_disconnection_comp_evt (UINT8 *p); #if (SMP_INCLUDED == TRUE) static void btu_hcif_authentication_comp_evt (UINT8 *p); #endif ///SMP_INCLUDED == TRUE static void btu_hcif_rmt_name_request_comp_evt (UINT8 *p, UINT16 evt_len); #if (SMP_INCLUDED == TRUE) static void btu_hcif_encryption_change_evt (UINT8 *p); #endif ///SMP_INCLUDED == TRUE static void btu_hcif_read_rmt_features_comp_evt (UINT8 *p); static void btu_hcif_read_rmt_ext_features_comp_evt (UINT8 *p); static void btu_hcif_read_rmt_version_comp_evt (UINT8 *p); static void btu_hcif_qos_setup_comp_evt (UINT8 *p); static void btu_hcif_command_complete_evt (BT_HDR *response, void *context); static void btu_hcif_command_status_evt (uint8_t status, BT_HDR *command, void *context); static void btu_hcif_hardware_error_evt (UINT8 *p); static void btu_hcif_flush_occured_evt (void); static void btu_hcif_role_change_evt (UINT8 *p); static void btu_hcif_num_compl_data_pkts_evt (UINT8 *p); static void btu_hcif_mode_change_evt (UINT8 *p); #if (SMP_INCLUDED == TRUE) static void btu_hcif_pin_code_request_evt (UINT8 *p); static void btu_hcif_link_key_request_evt (UINT8 *p); static void btu_hcif_link_key_notification_evt (UINT8 *p); #endif ///SMP_INCLUDED == TRUE static void btu_hcif_loopback_command_evt (void); static void btu_hcif_data_buf_overflow_evt (void); static void btu_hcif_max_slots_changed_evt (void); static void btu_hcif_read_clock_off_comp_evt (UINT8 *p); static void btu_hcif_conn_pkt_type_change_evt (void); static void btu_hcif_qos_violation_evt (UINT8 *p); static void btu_hcif_page_scan_mode_change_evt (void); static void btu_hcif_page_scan_rep_mode_chng_evt (void); static void btu_hcif_esco_connection_comp_evt(UINT8 *p); static void btu_hcif_esco_connection_chg_evt(UINT8 *p); /* Simple Pairing Events */ static void btu_hcif_host_support_evt (UINT8 *p); #if (SMP_INCLUDED == TRUE) static void btu_hcif_io_cap_request_evt (UINT8 *p); static void btu_hcif_io_cap_response_evt (UINT8 *p); static void btu_hcif_user_conf_request_evt (UINT8 *p); static void btu_hcif_user_passkey_request_evt (UINT8 *p); static void btu_hcif_user_passkey_notif_evt (UINT8 *p); static void btu_hcif_keypress_notif_evt (UINT8 *p); #endif ///SMP_INCLUDED == TRUE #if BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE static void btu_hcif_rem_oob_request_evt (UINT8 *p); #endif #if (SMP_INCLUDED == TRUE) static void btu_hcif_simple_pair_complete_evt (UINT8 *p); #endif ///SMP_INCLUDED == TRUE #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE static void btu_hcif_enhanced_flush_complete_evt (void); #endif #if (BTM_SSR_INCLUDED == TRUE) static void btu_hcif_ssr_evt (UINT8 *p, UINT16 evt_len); #endif /* BTM_SSR_INCLUDED == TRUE */ #if BLE_INCLUDED == TRUE static void btu_ble_ll_conn_complete_evt (UINT8 *p, UINT16 evt_len); static void btu_ble_process_adv_pkt (UINT8 *p); static void btu_ble_process_adv_dis(UINT8 *p); static void btu_ble_read_remote_feat_evt (UINT8 *p); static void btu_ble_ll_conn_param_upd_evt (UINT8 *p, UINT16 evt_len); static void btu_ble_ll_get_conn_param_format_err_from_contoller (UINT8 status, UINT16 handle); #if (SMP_INCLUDED == TRUE) static void btu_ble_proc_ltk_req (UINT8 *p); static void btu_hcif_encryption_key_refresh_cmpl_evt (UINT8 *p); #endif ///SMP_INCLUDED == TRUE static void btu_ble_data_length_change_evt (UINT8 *p, UINT16 evt_len); #if (BLE_LLT_INCLUDED == TRUE) static void btu_ble_rc_param_req_evt(UINT8 *p); #endif //#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) static void btu_ble_proc_enhanced_conn_cmpl (UINT8 *p, UINT16 evt_len); //#endif extern osi_sem_t adv_enable_sem; extern osi_sem_t adv_data_sem; extern osi_sem_t adv_param_sem; extern osi_sem_t scan_enable_sem; extern osi_sem_t scan_param_sem; extern uint8_t adv_enable_status; extern uint8_t adv_data_status; extern uint8_t adv_param_status; extern uint8_t scan_enable_status; extern uint8_t scan_param_status; #endif /******************************************************************************* ** ** Function btu_hcif_process_event ** ** Description This function is called when an event is received from ** the Host Controller. ** ** Returns void ** *******************************************************************************/ void btu_hcif_process_event (UNUSED_ATTR UINT8 controller_id, BT_HDR *p_msg) { UINT8 *p = (UINT8 *)(p_msg + 1) + p_msg->offset; UINT8 hci_evt_code, hci_evt_len; #if BLE_INCLUDED == TRUE UINT8 ble_sub_code; #endif STREAM_TO_UINT8 (hci_evt_code, p); STREAM_TO_UINT8 (hci_evt_len, p); switch (hci_evt_code) { case HCI_INQUIRY_COMP_EVT: btu_hcif_inquiry_comp_evt (p); break; case HCI_INQUIRY_RESULT_EVT: btu_hcif_inquiry_result_evt (p); break; case HCI_INQUIRY_RSSI_RESULT_EVT: btu_hcif_inquiry_rssi_result_evt (p); break; case HCI_EXTENDED_INQUIRY_RESULT_EVT: btu_hcif_extended_inquiry_result_evt (p); break; case HCI_CONNECTION_COMP_EVT: btu_hcif_connection_comp_evt (p); break; case HCI_CONNECTION_REQUEST_EVT: btu_hcif_connection_request_evt (p); break; case HCI_DISCONNECTION_COMP_EVT: btu_hcif_disconnection_comp_evt (p); break; case HCI_AUTHENTICATION_COMP_EVT: #if (SMP_INCLUDED == TRUE) btu_hcif_authentication_comp_evt (p); #endif ///SMP_INCLUDED == TRUE break; case HCI_RMT_NAME_REQUEST_COMP_EVT: btu_hcif_rmt_name_request_comp_evt (p, hci_evt_len); break; case HCI_ENCRYPTION_CHANGE_EVT: #if (SMP_INCLUDED == TRUE) btu_hcif_encryption_change_evt (p); #endif ///SMP_INCLUDED == TRUE break; #if BLE_INCLUDED == TRUE case HCI_ENCRYPTION_KEY_REFRESH_COMP_EVT: #if (SMP_INCLUDED == TRUE) btu_hcif_encryption_key_refresh_cmpl_evt(p); #endif ///SMP_INCLUDED == TRUE break; #endif case HCI_READ_RMT_FEATURES_COMP_EVT: btu_hcif_read_rmt_features_comp_evt (p); break; case HCI_READ_RMT_EXT_FEATURES_COMP_EVT: btu_hcif_read_rmt_ext_features_comp_evt (p); break; case HCI_READ_RMT_VERSION_COMP_EVT: btu_hcif_read_rmt_version_comp_evt (p); break; case HCI_QOS_SETUP_COMP_EVT: btu_hcif_qos_setup_comp_evt (p); break; case HCI_COMMAND_COMPLETE_EVT: //HCI_TRACE_ERROR("%s should not have received a command complete event. " // "Someone didn't go through the hci transmit_command function.", __func__); break; case HCI_COMMAND_STATUS_EVT: //HCI_TRACE_ERROR("%s should not have received a command status event. " // "Someone didn't go through the hci transmit_command function.", __func__); break; case HCI_HARDWARE_ERROR_EVT: btu_hcif_hardware_error_evt (p); break; case HCI_FLUSH_OCCURED_EVT: btu_hcif_flush_occured_evt (); break; case HCI_ROLE_CHANGE_EVT: btu_hcif_role_change_evt (p); break; case HCI_NUM_COMPL_DATA_PKTS_EVT: btu_hcif_num_compl_data_pkts_evt (p); break; case HCI_MODE_CHANGE_EVT: btu_hcif_mode_change_evt (p); break; #if (SMP_INCLUDED == TRUE) case HCI_PIN_CODE_REQUEST_EVT: btu_hcif_pin_code_request_evt (p); break; case HCI_LINK_KEY_REQUEST_EVT: btu_hcif_link_key_request_evt (p); break; case HCI_LINK_KEY_NOTIFICATION_EVT: btu_hcif_link_key_notification_evt (p); break; #endif ///SMP_INCLUDED == TRUE case HCI_LOOPBACK_COMMAND_EVT: btu_hcif_loopback_command_evt (); break; case HCI_DATA_BUF_OVERFLOW_EVT: btu_hcif_data_buf_overflow_evt (); break; case HCI_MAX_SLOTS_CHANGED_EVT: btu_hcif_max_slots_changed_evt (); break; case HCI_READ_CLOCK_OFF_COMP_EVT: btu_hcif_read_clock_off_comp_evt (p); break; case HCI_CONN_PKT_TYPE_CHANGE_EVT: btu_hcif_conn_pkt_type_change_evt (); break; case HCI_QOS_VIOLATION_EVT: btu_hcif_qos_violation_evt (p); break; case HCI_PAGE_SCAN_MODE_CHANGE_EVT: btu_hcif_page_scan_mode_change_evt (); break; case HCI_PAGE_SCAN_REP_MODE_CHNG_EVT: btu_hcif_page_scan_rep_mode_chng_evt (); break; case HCI_ESCO_CONNECTION_COMP_EVT: btu_hcif_esco_connection_comp_evt (p); break; case HCI_ESCO_CONNECTION_CHANGED_EVT: btu_hcif_esco_connection_chg_evt (p); break; #if (BTM_SSR_INCLUDED == TRUE) case HCI_SNIFF_SUB_RATE_EVT: btu_hcif_ssr_evt (p, hci_evt_len); break; #endif /* BTM_SSR_INCLUDED == TRUE */ case HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT: btu_hcif_host_support_evt (p); break; #if (SMP_INCLUDED == TRUE) case HCI_IO_CAPABILITY_REQUEST_EVT: btu_hcif_io_cap_request_evt (p); break; case HCI_IO_CAPABILITY_RESPONSE_EVT: btu_hcif_io_cap_response_evt (p); break; case HCI_USER_CONFIRMATION_REQUEST_EVT: btu_hcif_user_conf_request_evt (p); break; case HCI_USER_PASSKEY_REQUEST_EVT: btu_hcif_user_passkey_request_evt (p); break; #endif ///SMP_INCLUDED == TRUE #if BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE case HCI_REMOTE_OOB_DATA_REQUEST_EVT: btu_hcif_rem_oob_request_evt (p); break; #endif #if (SMP_INCLUDED == TRUE) case HCI_SIMPLE_PAIRING_COMPLETE_EVT: btu_hcif_simple_pair_complete_evt (p); break; case HCI_USER_PASSKEY_NOTIFY_EVT: btu_hcif_user_passkey_notif_evt (p); break; case HCI_KEYPRESS_NOTIFY_EVT: btu_hcif_keypress_notif_evt (p); break; #endif ///SMP_INCLUDED == TRUE #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE case HCI_ENHANCED_FLUSH_COMPLETE_EVT: btu_hcif_enhanced_flush_complete_evt (); break; #endif #if (BLE_INCLUDED == TRUE) case HCI_BLE_EVENT: STREAM_TO_UINT8 (ble_sub_code, p); HCI_TRACE_DEBUG("BLE HCI(id=%d) event = 0x%02x)", hci_evt_code, ble_sub_code); switch (ble_sub_code) { case HCI_BLE_ADV_PKT_RPT_EVT: /* result of inquiry */ btu_ble_process_adv_pkt(p); break; case HCI_BLE_ADV_DISCARD_REPORT_EVT: btu_ble_process_adv_dis(p); break; case HCI_BLE_CONN_COMPLETE_EVT: btu_ble_ll_conn_complete_evt(p, hci_evt_len); break; case HCI_BLE_LL_CONN_PARAM_UPD_EVT: btu_ble_ll_conn_param_upd_evt(p, hci_evt_len); break; case HCI_BLE_READ_REMOTE_FEAT_CMPL_EVT: btu_ble_read_remote_feat_evt(p); break; case HCI_BLE_LTK_REQ_EVT: /* received only at slave device */ #if (SMP_INCLUDED == TRUE) btu_ble_proc_ltk_req(p); #endif ///SMP_INCLUDED == TRUE break; //#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) case HCI_BLE_ENHANCED_CONN_COMPLETE_EVT: btu_ble_proc_enhanced_conn_cmpl(p, hci_evt_len); break; //#endif #if (BLE_LLT_INCLUDED == TRUE) case HCI_BLE_RC_PARAM_REQ_EVT: btu_ble_rc_param_req_evt(p); break; #endif case HCI_BLE_DATA_LENGTH_CHANGE_EVT: btu_ble_data_length_change_evt(p, hci_evt_len); break; } break; #endif /* BLE_INCLUDED */ case HCI_VENDOR_SPECIFIC_EVT: btm_vendor_specific_evt (p, hci_evt_len); break; } } /******************************************************************************* ** ** Function btu_hcif_send_cmd ** ** Description This function is called to send commands to the Host Controller. ** ** Returns void ** *******************************************************************************/ void btu_hcif_send_cmd (UNUSED_ATTR UINT8 controller_id, BT_HDR *p_buf) { if (!p_buf) { return; } uint16_t opcode; uint8_t *stream = p_buf->data + p_buf->offset; void *vsc_callback = NULL; STREAM_TO_UINT16(opcode, stream); // Eww...horrible hackery here /* If command was a VSC, then extract command_complete callback */ if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC #if BLE_INCLUDED == TRUE || (opcode == HCI_BLE_RAND) || (opcode == HCI_BLE_ENCRYPT) #endif ) { vsc_callback = *((void **)(p_buf + 1)); } hci_layer_get_interface()->transmit_command( p_buf, btu_hcif_command_complete_evt, btu_hcif_command_status_evt, vsc_callback); #if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE) btu_check_bt_sleep (); #endif } /******************************************************************************* ** ** Function btu_hcif_send_host_rdy_for_data ** ** Description This function is called to check if it can send commands ** to the Host Controller. It may be passed the address of ** a packet to send. ** ** Returns void ** *******************************************************************************/ void btu_hcif_send_host_rdy_for_data(void) { UINT16 num_pkts[MAX_L2CAP_LINKS + 4]; /* 3 SCO connections */ UINT16 handles[MAX_L2CAP_LINKS + 4]; UINT8 num_ents; /* Get the L2CAP numbers */ num_ents = l2c_link_pkts_rcvd (num_pkts, handles); /* Get the SCO numbers */ /* No SCO for now ?? */ if (num_ents) { btsnd_hcic_host_num_xmitted_pkts (num_ents, handles, num_pkts); } } /******************************************************************************* ** ** Function btu_hcif_inquiry_comp_evt ** ** Description Process event HCI_INQUIRY_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_inquiry_comp_evt (UINT8 *p) { UINT8 status; STREAM_TO_UINT8 (status, p); /* Tell inquiry processing that we are done */ btm_process_inq_complete(status, BTM_BR_INQUIRY_MASK); } /******************************************************************************* ** ** Function btu_hcif_inquiry_result_evt ** ** Description Process event HCI_INQUIRY_RESULT_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_inquiry_result_evt (UINT8 *p) { /* Store results in the cache */ btm_process_inq_results (p, BTM_INQ_RESULT_STANDARD); } /******************************************************************************* ** ** Function btu_hcif_inquiry_rssi_result_evt ** ** Description Process event HCI_INQUIRY_RSSI_RESULT_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_inquiry_rssi_result_evt (UINT8 *p) { /* Store results in the cache */ btm_process_inq_results (p, BTM_INQ_RESULT_WITH_RSSI); } /******************************************************************************* ** ** Function btu_hcif_extended_inquiry_result_evt ** ** Description Process event HCI_EXTENDED_INQUIRY_RESULT_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_extended_inquiry_result_evt (UINT8 *p) { /* Store results in the cache */ btm_process_inq_results (p, BTM_INQ_RESULT_EXTENDED); } /******************************************************************************* ** ** Function btu_hcif_connection_comp_evt ** ** Description Process event HCI_CONNECTION_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_connection_comp_evt (UINT8 *p) { UINT8 status; UINT16 handle; BD_ADDR bda; UINT8 link_type; #if SMP_INCLUDED == TRUE UINT8 enc_mode; #endif ///SMP_INCLUDED == TRUE #if BTM_SCO_INCLUDED == TRUE tBTM_ESCO_DATA esco_data; #endif STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); STREAM_TO_BDADDR (bda, p); STREAM_TO_UINT8 (link_type, p); #if (SMP_INCLUDED == TRUE) STREAM_TO_UINT8 (enc_mode, p); #endif ///SMP_INCLUDED == TRUE handle = HCID_GET_HANDLE (handle); if (link_type == HCI_LINK_TYPE_ACL) { #if (SMP_INCLUDED == TRUE) btm_sec_connected (bda, handle, status, enc_mode); #endif ///SMP_INCLUDED == TRUE l2c_link_hci_conn_comp (status, handle, bda); } #if BTM_SCO_INCLUDED == TRUE else { memset(&esco_data, 0, sizeof(tBTM_ESCO_DATA)); /* esco_data.link_type = HCI_LINK_TYPE_SCO; already zero */ memcpy (esco_data.bd_addr, bda, BD_ADDR_LEN); btm_sco_connected (status, bda, handle, &esco_data); } #endif /* BTM_SCO_INCLUDED */ } /******************************************************************************* ** ** Function btu_hcif_connection_request_evt ** ** Description Process event HCI_CONNECTION_REQUEST_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_connection_request_evt (UINT8 *p) { BD_ADDR bda; DEV_CLASS dc; UINT8 link_type; STREAM_TO_BDADDR (bda, p); STREAM_TO_DEVCLASS (dc, p); STREAM_TO_UINT8 (link_type, p); /* Pass request to security manager to check connect filters before */ /* passing request to l2cap */ if (link_type == HCI_LINK_TYPE_ACL) { #if (SMP_INCLUDED == TRUE) btm_sec_conn_req (bda, dc); #endif ///SMP_INCLUDED == TRUE } #if BTM_SCO_INCLUDED == TRUE else { btm_sco_conn_req (bda, dc, link_type); } #endif /* BTM_SCO_INCLUDED */ } /******************************************************************************* ** ** Function btu_hcif_disconnection_comp_evt ** ** Description Process event HCI_DISCONNECTION_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_disconnection_comp_evt (UINT8 *p) { UINT16 handle; UINT8 reason; ++p; STREAM_TO_UINT16 (handle, p); STREAM_TO_UINT8 (reason, p); handle = HCID_GET_HANDLE (handle); #if BTM_SCO_INCLUDED == TRUE /* If L2CAP doesn't know about it, send it to SCO */ if (!l2c_link_hci_disc_comp (handle, reason)) { btm_sco_removed (handle, reason); } #else l2c_link_hci_disc_comp (handle, reason); #endif /* BTM_SCO_INCLUDED */ #if (SMP_INCLUDED == TRUE) /* Notify security manager */ btm_sec_disconnected (handle, reason); #endif ///SMP_INCLUDED == TRUE } /******************************************************************************* ** ** Function btu_hcif_authentication_comp_evt ** ** Description Process event HCI_AUTHENTICATION_COMP_EVT ** ** Returns void ** *******************************************************************************/ #if (SMP_INCLUDED == TRUE) static void btu_hcif_authentication_comp_evt (UINT8 *p) { UINT8 status; UINT16 handle; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); btm_sec_auth_complete (handle, status); } #endif ///SMP_INCLUDED == TRUE /******************************************************************************* ** ** Function btu_hcif_rmt_name_request_comp_evt ** ** Description Process event HCI_RMT_NAME_REQUEST_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_rmt_name_request_comp_evt (UINT8 *p, UINT16 evt_len) { UINT8 status; BD_ADDR bd_addr; STREAM_TO_UINT8 (status, p); STREAM_TO_BDADDR (bd_addr, p); evt_len -= (1 + BD_ADDR_LEN); btm_process_remote_name (bd_addr, p, evt_len, status); #if (SMP_INCLUDED == TRUE) btm_sec_rmt_name_request_complete (bd_addr, p, status); #endif ///SMP_INCLUDED == TRUE } /******************************************************************************* ** ** Function btu_hcif_encryption_change_evt ** ** Description Process event HCI_ENCRYPTION_CHANGE_EVT ** ** Returns void ** *******************************************************************************/ #if (SMP_INCLUDED == TRUE) static void btu_hcif_encryption_change_evt (UINT8 *p) { UINT8 status; UINT16 handle; UINT8 encr_enable; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); STREAM_TO_UINT8 (encr_enable, p); btm_acl_encrypt_change (handle, status, encr_enable); btm_sec_encrypt_change (handle, status, encr_enable); } #endif ///SMP_INCLUDED == TRUE /******************************************************************************* ** ** Function btu_hcif_read_rmt_features_comp_evt ** ** Description Process event HCI_READ_RMT_FEATURES_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_read_rmt_features_comp_evt (UINT8 *p) { btm_read_remote_features_complete(p); } /******************************************************************************* ** ** Function btu_hcif_read_rmt_ext_features_comp_evt ** ** Description Process event HCI_READ_RMT_EXT_FEATURES_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_read_rmt_ext_features_comp_evt (UINT8 *p) { UINT8 *p_cur = p; UINT8 status; UINT16 handle; STREAM_TO_UINT8 (status, p_cur); if (status == HCI_SUCCESS) { btm_read_remote_ext_features_complete(p); } else { STREAM_TO_UINT16 (handle, p_cur); btm_read_remote_ext_features_failed(status, handle); } } /******************************************************************************* ** ** Function btu_hcif_read_rmt_version_comp_evt ** ** Description Process event HCI_READ_RMT_VERSION_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_read_rmt_version_comp_evt (UINT8 *p) { btm_read_remote_version_complete (p); } /******************************************************************************* ** ** Function btu_hcif_qos_setup_comp_evt ** ** Description Process event HCI_QOS_SETUP_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_qos_setup_comp_evt (UINT8 *p) { UINT8 status; UINT16 handle; FLOW_SPEC flow; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); STREAM_TO_UINT8 (flow.qos_flags, p); STREAM_TO_UINT8 (flow.service_type, p); STREAM_TO_UINT32 (flow.token_rate, p); STREAM_TO_UINT32 (flow.peak_bandwidth, p); STREAM_TO_UINT32 (flow.latency, p); STREAM_TO_UINT32 (flow.delay_variation, p); btm_qos_setup_complete(status, handle, &flow); } /******************************************************************************* ** ** Function btu_hcif_esco_connection_comp_evt ** ** Description Process event HCI_ESCO_CONNECTION_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_esco_connection_comp_evt (UINT8 *p) { #if BTM_SCO_INCLUDED == TRUE tBTM_ESCO_DATA data; UINT16 handle; BD_ADDR bda; UINT8 status; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); STREAM_TO_BDADDR (bda, p); STREAM_TO_UINT8 (data.link_type, p); STREAM_TO_UINT8 (data.tx_interval, p); STREAM_TO_UINT8 (data.retrans_window, p); STREAM_TO_UINT16 (data.rx_pkt_len, p); STREAM_TO_UINT16 (data.tx_pkt_len, p); STREAM_TO_UINT8 (data.air_mode, p); memcpy (data.bd_addr, bda, BD_ADDR_LEN); btm_sco_connected (status, bda, handle, &data); #endif } /******************************************************************************* ** ** Function btu_hcif_esco_connection_chg_evt ** ** Description Process event HCI_ESCO_CONNECTION_CHANGED_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_esco_connection_chg_evt (UINT8 *p) { #if BTM_SCO_INCLUDED == TRUE UINT16 handle; UINT16 tx_pkt_len; UINT16 rx_pkt_len; UINT8 status; UINT8 tx_interval; UINT8 retrans_window; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); STREAM_TO_UINT8 (tx_interval, p); STREAM_TO_UINT8 (retrans_window, p); STREAM_TO_UINT16 (rx_pkt_len, p); STREAM_TO_UINT16 (tx_pkt_len, p); btm_esco_proc_conn_chg (status, handle, tx_interval, retrans_window, rx_pkt_len, tx_pkt_len); #endif } /******************************************************************************* ** ** Function btu_hcif_hdl_command_complete ** ** Description Handle command complete event ** ** Returns void ** *******************************************************************************/ static void btu_hcif_hdl_command_complete (UINT16 opcode, UINT8 *p, UINT16 evt_len, void *p_cplt_cback) { switch (opcode) { case HCI_INQUIRY_CANCEL: /* Tell inquiry processing that we are done */ btm_process_cancel_complete(HCI_SUCCESS, BTM_BR_INQUIRY_MASK); break; case HCI_SET_EVENT_FILTER: btm_event_filter_complete (p); break; case HCI_DELETE_STORED_LINK_KEY: btm_delete_stored_link_key_complete (p); break; case HCI_READ_LOCAL_NAME: btm_read_local_name_complete (p, evt_len); break; case HCI_GET_LINK_QUALITY: btm_read_link_quality_complete (p); break; case HCI_READ_RSSI: btm_read_rssi_complete (p); break; case HCI_READ_TRANSMIT_POWER_LEVEL: btm_read_tx_power_complete(p, FALSE); break; case HCI_CREATE_CONNECTION_CANCEL: btm_create_conn_cancel_complete(p); break; case HCI_READ_LOCAL_OOB_DATA: #if BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE btm_read_local_oob_complete(p); #endif break; case HCI_READ_INQ_TX_POWER_LEVEL: btm_read_linq_tx_power_complete (p); break; #if (CLASSIC_BT_INCLUDED == TRUE) case HCI_SET_AFH_CHANNELS: btm_set_afh_channels_complete(p); break; #endif #if (BLE_INCLUDED == TRUE) /* BLE Commands Complete*/ case HCI_BLE_SET_HOST_CHNL_CLASS: btm_ble_set_channels_complete(p); break; case HCI_BLE_ADD_WHITE_LIST: btm_ble_add_2_white_list_complete(*p); break; case HCI_BLE_CLEAR_WHITE_LIST: btm_ble_clear_white_list_complete(p, evt_len); break; case HCI_BLE_WRITE_ADV_PARAMS: { uint8_t status; STREAM_TO_UINT8 (status, p); if(status != HCI_SUCCESS) { HCI_TRACE_ERROR("hci write adv params error 0x%x", status); } break; } case HCI_BLE_RC_PARAM_REQ_REPLY: { uint8_t status; STREAM_TO_UINT8 (status, p); if(status != HCI_SUCCESS) { HCI_TRACE_ERROR("hci connection params reply command error 0x%x", status); } break; } case HCI_BLE_RC_PARAM_REQ_NEG_REPLY: { uint8_t status; STREAM_TO_UINT8 (status, p); if(status != HCI_SUCCESS) { HCI_TRACE_ERROR("hci connection params neg reply command error %x", status); } break; } case HCI_BLE_REMOVE_WHITE_LIST: btm_ble_remove_from_white_list_complete(p, evt_len); break; case HCI_BLE_RAND: case HCI_BLE_ENCRYPT: #if (SMP_INCLUDED == TRUE) btm_ble_rand_enc_complete (p, opcode, (tBTM_RAND_ENC_CB *)p_cplt_cback); #endif ///SMP_INCLUDED == TRUE break; case HCI_BLE_READ_ADV_CHNL_TX_POWER: btm_read_tx_power_complete(p, TRUE); break; case HCI_BLE_WRITE_ADV_ENABLE: btm_ble_write_adv_enable_complete(p); break; case HCI_BLE_CREATE_LL_CONN: btm_ble_create_ll_conn_complete(*p); break; case HCI_BLE_TRANSMITTER_TEST: case HCI_BLE_RECEIVER_TEST: case HCI_BLE_TEST_END: btm_ble_test_command_complete(p); break; case HCI_BLE_CREATE_CONN_CANCEL: btm_ble_create_conn_cancel_complete(p); break; #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) case HCI_BLE_ADD_DEV_RESOLVING_LIST: btm_ble_add_resolving_list_entry_complete(p, evt_len); break; case HCI_BLE_RM_DEV_RESOLVING_LIST: btm_ble_remove_resolving_list_entry_complete(p, evt_len); break; case HCI_BLE_CLEAR_RESOLVING_LIST: btm_ble_clear_resolving_list_complete(p, evt_len); break; case HCI_BLE_READ_RESOLVABLE_ADDR_PEER: btm_ble_read_resolving_list_entry_complete(p, evt_len); break; case HCI_BLE_READ_RESOLVABLE_ADDR_LOCAL: case HCI_BLE_SET_ADDR_RESOLUTION_ENABLE: case HCI_BLE_SET_RAND_PRIV_ADDR_TIMOUT: break; #endif #endif /* (BLE_INCLUDED == TRUE) */ default: { if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC) { btm_vsc_complete (p, opcode, evt_len, (tBTM_CMPL_CB *)p_cplt_cback); } uint8_t status; STREAM_TO_UINT8 (status, p); if(status != HCI_SUCCESS) { HCI_TRACE_ERROR("%s opcode 0x%x status 0x%x", __func__, opcode, status); } break; } } } /******************************************************************************* ** ** Function btu_hcif_command_complete_evt ** ** Description Process event HCI_COMMAND_COMPLETE_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_command_complete_evt_on_task(BT_HDR *event) { command_complete_hack_t *hack = (command_complete_hack_t *)&event->data[0]; command_opcode_t opcode; uint8_t *stream = hack->response->data + hack->response->offset + 3; // 2 to skip the event headers, 1 to skip the command credits STREAM_TO_UINT16(opcode, stream); btu_hcif_hdl_command_complete( opcode, stream, hack->response->len - 5, // 3 for the command complete headers, 2 for the event headers hack->context); osi_free(hack->response); osi_free(event); } static void btu_hcif_command_complete_evt(BT_HDR *response, void *context) { #if (BLE_INCLUDED == TRUE) command_opcode_t opcode; uint8_t *stream = response->data + response->offset + 3; STREAM_TO_UINT16(opcode, stream); switch (opcode) { case HCI_BLE_WRITE_ADV_DATA: adv_data_status = *stream; osi_sem_give(&adv_data_sem); break; case HCI_BLE_WRITE_SCAN_RSP_DATA: adv_data_status = *stream; osi_sem_give(&adv_data_sem); break; case HCI_BLE_WRITE_ADV_ENABLE: { adv_enable_status = *stream; osi_sem_give(&adv_enable_sem); break; } case HCI_BLE_WRITE_ADV_PARAMS: adv_param_status = *stream; osi_sem_give(&adv_param_sem); break; case HCI_BLE_WRITE_SCAN_PARAMS: scan_param_status = *stream; osi_sem_give(&scan_param_sem); break; case HCI_BLE_WRITE_SCAN_ENABLE: scan_enable_status = *stream; osi_sem_give(&scan_enable_sem); break; default: break; } #endif BT_HDR *event = osi_calloc(sizeof(BT_HDR) + sizeof(command_complete_hack_t)); command_complete_hack_t *hack = (command_complete_hack_t *)&event->data[0]; HCI_TRACE_DEBUG("btu_hcif_command_complete_evt\n"); hack->callback = btu_hcif_command_complete_evt_on_task; hack->response = response; hack->context = context; event->event = BTU_POST_TO_TASK_NO_GOOD_HORRIBLE_HACK; btu_task_post(SIG_BTU_HCI_MSG, event, OSI_THREAD_MAX_TIMEOUT); } /******************************************************************************* ** ** Function btu_hcif_hdl_command_status ** ** Description Handle a command status event ** ** Returns void ** *******************************************************************************/ static void btu_hcif_hdl_command_status (UINT16 opcode, UINT8 status, UINT8 *p_cmd, void *p_vsc_status_cback) { BD_ADDR bd_addr; UINT16 handle; #if BTM_SCO_INCLUDED == TRUE tBTM_ESCO_DATA esco_data; #endif switch (opcode) { case HCI_EXIT_SNIFF_MODE: case HCI_EXIT_PARK_MODE: #if BTM_SCO_WAKE_PARKED_LINK == TRUE if (status != HCI_SUCCESS) { /* Allow SCO initiation to continue if waiting for change mode event */ if (p_cmd != NULL) { p_cmd++; /* bypass length field */ STREAM_TO_UINT16 (handle, p_cmd); btm_sco_chk_pend_unpark (status, handle); } } #endif /* Case Falls Through */ case HCI_HOLD_MODE: case HCI_SNIFF_MODE: case HCI_PARK_MODE: btm_pm_proc_cmd_status(status); break; default: /* If command failed to start, we may need to tell BTM */ if (status != HCI_SUCCESS) { switch (opcode) { case HCI_INQUIRY: /* Tell inquiry processing that we are done */ btm_process_inq_complete(status, BTM_BR_INQUIRY_MASK); break; case HCI_RMT_NAME_REQUEST: /* Tell inquiry processing that we are done */ btm_process_remote_name (NULL, NULL, 0, status); #if (SMP_INCLUDED == TRUE) btm_sec_rmt_name_request_complete (NULL, NULL, status); #endif ///SMP_INCLUDED == TRUE break; case HCI_QOS_SETUP_COMP_EVT: /* Tell qos setup that we are done */ btm_qos_setup_complete(status, 0, NULL); break; case HCI_SWITCH_ROLE: /* Tell BTM that the command failed */ /* read bd addr out of stored command */ if (p_cmd != NULL) { p_cmd++; STREAM_TO_BDADDR (bd_addr, p_cmd); btm_acl_role_changed(status, bd_addr, BTM_ROLE_UNDEFINED); } else { btm_acl_role_changed(status, NULL, BTM_ROLE_UNDEFINED); } l2c_link_role_changed (NULL, BTM_ROLE_UNDEFINED, HCI_ERR_COMMAND_DISALLOWED); break; case HCI_CREATE_CONNECTION: /* read bd addr out of stored command */ if (p_cmd != NULL) { p_cmd++; STREAM_TO_BDADDR (bd_addr, p_cmd); #if (SMP_INCLUDED == TRUE) btm_sec_connected (bd_addr, HCI_INVALID_HANDLE, status, 0); #endif ///SMP_INCLUDED == TRUE l2c_link_hci_conn_comp (status, HCI_INVALID_HANDLE, bd_addr); } break; case HCI_READ_RMT_EXT_FEATURES: if (p_cmd != NULL) { p_cmd++; /* skip command length */ STREAM_TO_UINT16 (handle, p_cmd); } else { handle = HCI_INVALID_HANDLE; } btm_read_remote_ext_features_failed(status, handle); break; case HCI_AUTHENTICATION_REQUESTED: #if (SMP_INCLUDED == TRUE) /* Device refused to start authentication. That should be treated as authentication failure. */ btm_sec_auth_complete (BTM_INVALID_HCI_HANDLE, status); #endif ///SMP_INCLUDED == TRUE break; case HCI_SET_CONN_ENCRYPTION: #if (SMP_INCLUDED == TRUE) /* Device refused to start encryption. That should be treated as encryption failure. */ btm_sec_encrypt_change (BTM_INVALID_HCI_HANDLE, status, FALSE); #endif ///SMP_INCLUDED == TRUE break; #if BLE_INCLUDED == TRUE case HCI_BLE_CREATE_LL_CONN: btm_ble_create_ll_conn_complete(status); break; case HCI_BLE_UPD_LL_CONN_PARAMS: if (p_cmd != NULL){ p_cmd++; STREAM_TO_UINT16 (handle, p_cmd); btu_ble_ll_get_conn_param_format_err_from_contoller(status, handle); } break; #endif #if BTM_SCO_INCLUDED == TRUE case HCI_SETUP_ESCO_CONNECTION: /* read handle out of stored command */ if (p_cmd != NULL) { p_cmd++; STREAM_TO_UINT16 (handle, p_cmd); /* Determine if initial connection failed or is a change of setup */ if (btm_is_sco_active(handle)) { btm_esco_proc_conn_chg (status, handle, 0, 0, 0, 0); } else { btm_sco_connected (status, NULL, handle, &esco_data); } } break; #endif /* This is commented out until an upper layer cares about returning event #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE case HCI_ENHANCED_FLUSH: break; #endif */ default: if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC) { btm_vsc_complete (&status, opcode, 1, (tBTM_CMPL_CB *)p_vsc_status_cback); } break; } } else { if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC) { btm_vsc_complete (&status, opcode, 1, (tBTM_CMPL_CB *)p_vsc_status_cback); } } } } /******************************************************************************* ** ** Function btu_hcif_command_status_evt ** ** Description Process event HCI_COMMAND_STATUS_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_command_status_evt_on_task(BT_HDR *event) { command_status_hack_t *hack = (command_status_hack_t *)&event->data[0]; command_opcode_t opcode; uint8_t *stream = hack->command->data + hack->command->offset; STREAM_TO_UINT16(opcode, stream); btu_hcif_hdl_command_status( opcode, hack->status, stream, hack->context); osi_free(hack->command); osi_free(event); } static void btu_hcif_command_status_evt(uint8_t status, BT_HDR *command, void *context) { BT_HDR *event = osi_calloc(sizeof(BT_HDR) + sizeof(command_status_hack_t)); command_status_hack_t *hack = (command_status_hack_t *)&event->data[0]; hack->callback = btu_hcif_command_status_evt_on_task; hack->status = status; hack->command = command; hack->context = context; event->event = BTU_POST_TO_TASK_NO_GOOD_HORRIBLE_HACK; btu_task_post(SIG_BTU_HCI_MSG, event, OSI_THREAD_MAX_TIMEOUT); } /******************************************************************************* ** ** Function btu_hcif_hardware_error_evt ** ** Description Process event HCI_HARDWARE_ERROR_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_hardware_error_evt (UINT8 *p) { HCI_TRACE_ERROR("Ctlr H/w error event - code:0x%x\n", *p); /* If anyone wants device status notifications, give him one. */ btm_report_device_status (BTM_DEV_STATUS_DOWN); /* Reset the controller */ if (BTM_IsDeviceUp()) { BTM_DeviceReset (NULL); } } /******************************************************************************* ** ** Function btu_hcif_flush_occured_evt ** ** Description Process event HCI_FLUSH_OCCURED_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_flush_occured_evt (void) { } /******************************************************************************* ** ** Function btu_hcif_role_change_evt ** ** Description Process event HCI_ROLE_CHANGE_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_role_change_evt (UINT8 *p) { UINT8 status; BD_ADDR bda; UINT8 role; STREAM_TO_UINT8 (status, p); STREAM_TO_BDADDR (bda, p); STREAM_TO_UINT8 (role, p); l2c_link_role_changed (bda, role, status); btm_acl_role_changed(status, bda, role); } /******************************************************************************* ** ** Function btu_hcif_num_compl_data_pkts_evt ** ** Description Process event HCI_NUM_COMPL_DATA_PKTS_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_num_compl_data_pkts_evt (UINT8 *p) { /* Process for L2CAP and SCO */ l2c_link_process_num_completed_pkts (p); /* Send on to SCO */ #if (BTM_SCO_HCI_INCLUDED == TRUE) && (BTM_SCO_INCLUDED == TRUE) btm_sco_process_num_completed_pkts (p); #endif } /******************************************************************************* ** ** Function btu_hcif_mode_change_evt ** ** Description Process event HCI_MODE_CHANGE_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_mode_change_evt (UINT8 *p) { UINT8 status; UINT16 handle; UINT8 current_mode; UINT16 interval; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); STREAM_TO_UINT8 (current_mode, p); STREAM_TO_UINT16 (interval, p); #if BTM_SCO_WAKE_PARKED_LINK == TRUE btm_sco_chk_pend_unpark (status, handle); #endif btm_pm_proc_mode_change (status, handle, current_mode, interval); /* #if (HID_DEV_INCLUDED == TRUE) && (HID_DEV_PM_INCLUDED == TRUE) hidd_pm_proc_mode_change( status, current_mode, interval ) ; #endif */ } /******************************************************************************* ** ** Function btu_hcif_ssr_evt ** ** Description Process event HCI_SNIFF_SUB_RATE_EVT ** ** Returns void ** *******************************************************************************/ #if (BTM_SSR_INCLUDED == TRUE) static void btu_hcif_ssr_evt (UINT8 *p, UINT16 evt_len) { btm_pm_proc_ssr_evt(p, evt_len); } #endif /******************************************************************************* ** ** Function btu_hcif_pin_code_request_evt ** ** Description Process event HCI_PIN_CODE_REQUEST_EVT ** ** Returns void ** *******************************************************************************/ #if (SMP_INCLUDED == TRUE) static void btu_hcif_pin_code_request_evt (UINT8 *p) { #if (CLASSIC_BT_INCLUDED == TRUE) BD_ADDR bda; STREAM_TO_BDADDR (bda, p); /* Tell L2CAP that there was a PIN code request, */ /* it may need to stretch timeouts */ l2c_pin_code_request (bda); btm_sec_pin_code_request (bda); #endif ///CLASSIC_BT_INCLUDED == TRUE } /******************************************************************************* ** ** Function btu_hcif_link_key_request_evt ** ** Description Process event HCI_LINK_KEY_REQUEST_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_link_key_request_evt (UINT8 *p) { BD_ADDR bda; STREAM_TO_BDADDR (bda, p); btm_sec_link_key_request (bda); } /******************************************************************************* ** ** Function btu_hcif_link_key_notification_evt ** ** Description Process event HCI_LINK_KEY_NOTIFICATION_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_link_key_notification_evt (UINT8 *p) { BD_ADDR bda; LINK_KEY key; UINT8 key_type; STREAM_TO_BDADDR (bda, p); STREAM_TO_ARRAY16 (key, p); STREAM_TO_UINT8 (key_type, p); btm_sec_link_key_notification (bda, key, key_type); } #endif ///SMP_INCLUDED == TRUE /******************************************************************************* ** ** Function btu_hcif_loopback_command_evt ** ** Description Process event HCI_LOOPBACK_COMMAND_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_loopback_command_evt (void) { } /******************************************************************************* ** ** Function btu_hcif_data_buf_overflow_evt ** ** Description Process event HCI_DATA_BUF_OVERFLOW_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_data_buf_overflow_evt (void) { } /******************************************************************************* ** ** Function btu_hcif_max_slots_changed_evt ** ** Description Process event HCI_MAX_SLOTS_CHANGED_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_max_slots_changed_evt (void) { } /******************************************************************************* ** ** Function btu_hcif_read_clock_off_comp_evt ** ** Description Process event HCI_READ_CLOCK_OFF_COMP_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_read_clock_off_comp_evt (UINT8 *p) { UINT8 status; UINT16 handle; UINT16 clock_offset; STREAM_TO_UINT8 (status, p); /* If failed to get clock offset just drop the result */ if (status != HCI_SUCCESS) { return; } STREAM_TO_UINT16 (handle, p); STREAM_TO_UINT16 (clock_offset, p); handle = HCID_GET_HANDLE (handle); btm_process_clk_off_comp_evt (handle, clock_offset); btm_sec_update_clock_offset (handle, clock_offset); } /******************************************************************************* ** ** Function btu_hcif_conn_pkt_type_change_evt ** ** Description Process event HCI_CONN_PKT_TYPE_CHANGE_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_conn_pkt_type_change_evt (void) { } /******************************************************************************* ** ** Function btu_hcif_qos_violation_evt ** ** Description Process event HCI_QOS_VIOLATION_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_qos_violation_evt (UINT8 *p) { UINT16 handle; STREAM_TO_UINT16 (handle, p); handle = HCID_GET_HANDLE (handle); l2c_link_hci_qos_violation (handle); } /******************************************************************************* ** ** Function btu_hcif_page_scan_mode_change_evt ** ** Description Process event HCI_PAGE_SCAN_MODE_CHANGE_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_page_scan_mode_change_evt (void) { } /******************************************************************************* ** ** Function btu_hcif_page_scan_rep_mode_chng_evt ** ** Description Process event HCI_PAGE_SCAN_REP_MODE_CHNG_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_page_scan_rep_mode_chng_evt (void) { } /********************************************** ** Simple Pairing Events ***********************************************/ /******************************************************************************* ** ** Function btu_hcif_host_support_evt ** ** Description Process event HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_host_support_evt (UINT8 *p) { btm_sec_rmt_host_support_feat_evt(p); } /******************************************************************************* ** ** Function btu_hcif_io_cap_request_evt ** ** Description Process event HCI_IO_CAPABILITY_REQUEST_EVT ** ** Returns void ** *******************************************************************************/ #if (SMP_INCLUDED == TRUE) static void btu_hcif_io_cap_request_evt (UINT8 *p) { btm_io_capabilities_req(p); } /******************************************************************************* ** ** Function btu_hcif_io_cap_response_evt ** ** Description Process event HCI_IO_CAPABILITY_RESPONSE_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_io_cap_response_evt (UINT8 *p) { btm_io_capabilities_rsp(p); } /******************************************************************************* ** ** Function btu_hcif_user_conf_request_evt ** ** Description Process event HCI_USER_CONFIRMATION_REQUEST_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_user_conf_request_evt (UINT8 *p) { btm_proc_sp_req_evt(BTM_SP_CFM_REQ_EVT, p); } /******************************************************************************* ** ** Function btu_hcif_user_passkey_request_evt ** ** Description Process event HCI_USER_PASSKEY_REQUEST_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_user_passkey_request_evt (UINT8 *p) { btm_proc_sp_req_evt(BTM_SP_KEY_REQ_EVT, p); } /******************************************************************************* ** ** Function btu_hcif_user_passkey_notif_evt ** ** Description Process event HCI_USER_PASSKEY_NOTIFY_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_user_passkey_notif_evt (UINT8 *p) { btm_proc_sp_req_evt(BTM_SP_KEY_NOTIF_EVT, p); } /******************************************************************************* ** ** Function btu_hcif_keypress_notif_evt ** ** Description Process event HCI_KEYPRESS_NOTIFY_EVT ** ** Returns void ** *******************************************************************************/ static void btu_hcif_keypress_notif_evt (UINT8 *p) { btm_keypress_notif_evt(p); } #endif ///SMP_INCLUDED == TRUE /******************************************************************************* ** ** Function btu_hcif_rem_oob_request_evt ** ** Description Process event HCI_REMOTE_OOB_DATA_REQUEST_EVT ** ** Returns void ** *******************************************************************************/ #if BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE static void btu_hcif_rem_oob_request_evt (UINT8 *p) { btm_rem_oob_req(p); } #endif /******************************************************************************* ** ** Function btu_hcif_simple_pair_complete_evt ** ** Description Process event HCI_SIMPLE_PAIRING_COMPLETE_EVT ** ** Returns void ** *******************************************************************************/ #if (SMP_INCLUDED == TRUE) static void btu_hcif_simple_pair_complete_evt (UINT8 *p) { btm_simple_pair_complete(p); } #endif ///SMP_INCLUDED == TRUE /******************************************************************************* ** ** Function btu_hcif_enhanced_flush_complete_evt ** ** Description Process event HCI_ENHANCED_FLUSH_COMPLETE_EVT ** ** Returns void ** *******************************************************************************/ #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE static void btu_hcif_enhanced_flush_complete_evt (void) { /* This is empty until an upper layer cares about returning event */ } #endif /********************************************** ** End of Simple Pairing Events ***********************************************/ /********************************************** ** BLE Events ***********************************************/ #if (defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE) #if (SMP_INCLUDED == TRUE) static void btu_hcif_encryption_key_refresh_cmpl_evt (UINT8 *p) { UINT8 status; UINT8 enc_enable = 0; UINT16 handle; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); if (status == HCI_SUCCESS) { enc_enable = 1; } btm_sec_encrypt_change (handle, status, enc_enable); } #endif ///SMP_INCLUDED == TRUE static void btu_ble_process_adv_pkt (UINT8 *p) { HCI_TRACE_DEBUG("btu_ble_process_adv_pkt\n"); btm_ble_process_adv_pkt(p); } static void btu_ble_process_adv_dis(UINT8 *p) { btm_ble_process_adv_discard_evt(p); } static void btu_ble_ll_conn_complete_evt ( UINT8 *p, UINT16 evt_len) { btm_ble_conn_complete(p, evt_len, FALSE); } //#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) static void btu_ble_proc_enhanced_conn_cmpl( UINT8 *p, UINT16 evt_len) { btm_ble_conn_complete(p, evt_len, TRUE); } //#endif static void btu_ble_ll_conn_param_upd_evt (UINT8 *p, UINT16 evt_len) { /* LE connection update has completed successfully as a master. */ /* We can enable the update request if the result is a success. */ /* extract the HCI handle first */ UINT8 status; UINT16 handle, conn_interval, conn_latency, conn_timeout; STREAM_TO_UINT8 (status, p); STREAM_TO_UINT16 (handle, p); STREAM_TO_UINT16 (conn_interval, p); STREAM_TO_UINT16 (conn_latency, p); STREAM_TO_UINT16 (conn_timeout, p); l2cble_process_conn_update_evt(handle, status, conn_interval, conn_latency, conn_timeout); } static void btu_ble_ll_get_conn_param_format_err_from_contoller (UINT8 status, UINT16 handle) { /* host send illegal connection parameters format, controller would send back HCI_ERR_ILLEGAL_PARAMETER_FMT */ l2cble_get_conn_param_format_err_from_contoller(status, handle); } static void btu_ble_read_remote_feat_evt (UINT8 *p) { btm_ble_read_remote_features_complete(p); } #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE static void btu_ble_proc_ltk_req (UINT8 *p) { UINT16 ediv, handle; UINT8 *pp; STREAM_TO_UINT16(handle, p); pp = p + 8; STREAM_TO_UINT16(ediv, pp); btm_ble_ltk_request(handle, p, ediv); /* This is empty until an upper layer cares about returning event */ } #endif ///BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE static void btu_ble_data_length_change_evt(UINT8 *p, UINT16 evt_len) { UINT16 handle; UINT16 tx_data_len; UINT16 rx_data_len; if (!controller_get_interface()->supports_ble_packet_extension()) { HCI_TRACE_WARNING("%s, request not supported", __FUNCTION__); return; } STREAM_TO_UINT16(handle, p); STREAM_TO_UINT16(tx_data_len, p); p += 2; /* Skip the TxTimer */ STREAM_TO_UINT16(rx_data_len, p); l2cble_process_data_length_change_event(handle, tx_data_len, rx_data_len); } /********************************************** ** End of BLE Events Handler ***********************************************/ #if (defined BLE_LLT_INCLUDED) && (BLE_LLT_INCLUDED == TRUE) static void btu_ble_rc_param_req_evt(UINT8 *p) { UINT16 handle; UINT16 int_min, int_max, latency, timeout; STREAM_TO_UINT16(handle, p); STREAM_TO_UINT16(int_min, p); STREAM_TO_UINT16(int_max, p); STREAM_TO_UINT16(latency, p); STREAM_TO_UINT16(timeout, p); l2cble_process_rc_param_request_evt(handle, int_min, int_max, latency, timeout); } #endif /* BLE_LLT_INCLUDED */ #endif /* BLE_INCLUDED */