// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #ifndef __ESP_SYSTEM_H__ #define __ESP_SYSTEM_H__ #include #include #include "esp_err.h" #include "esp_attr.h" #include "esp_bit_defs.h" #include "esp_idf_version.h" #include "sdkconfig.h" #ifdef __cplusplus extern "C" { #endif typedef enum { ESP_MAC_WIFI_STA, ESP_MAC_WIFI_SOFTAP, ESP_MAC_BT, ESP_MAC_ETH, } esp_mac_type_t; /** @cond */ #define TWO_UNIVERSAL_MAC_ADDR 2 #define FOUR_UNIVERSAL_MAC_ADDR 4 #if CONFIG_IDF_TARGET_ESP32 #define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES #elif CONFIG_IDF_TARGET_ESP32S2 #define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32S2_UNIVERSAL_MAC_ADDRESSES #elif CONFIG_IDF_TARGET_ESP32S3 #define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES #elif CONFIG_IDF_TARGET_ESP32C3 #define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES #endif /** @endcond */ /** * @brief Reset reasons */ typedef enum { ESP_RST_UNKNOWN, //!< Reset reason can not be determined ESP_RST_POWERON, //!< Reset due to power-on event ESP_RST_EXT, //!< Reset by external pin (not applicable for ESP32) ESP_RST_SW, //!< Software reset via esp_restart ESP_RST_PANIC, //!< Software reset due to exception/panic ESP_RST_INT_WDT, //!< Reset (software or hardware) due to interrupt watchdog ESP_RST_TASK_WDT, //!< Reset due to task watchdog ESP_RST_WDT, //!< Reset due to other watchdogs ESP_RST_DEEPSLEEP, //!< Reset after exiting deep sleep mode ESP_RST_BROWNOUT, //!< Brownout reset (software or hardware) ESP_RST_SDIO, //!< Reset over SDIO } esp_reset_reason_t; /** * Shutdown handler type */ typedef void (*shutdown_handler_t)(void); /** * @brief Register shutdown handler * * This function allows you to register a handler that gets invoked before * the application is restarted using esp_restart function. * @param handle function to execute on restart * @return * - ESP_OK on success * - ESP_ERR_INVALID_STATE if the handler has already been registered * - ESP_ERR_NO_MEM if no more shutdown handler slots are available */ esp_err_t esp_register_shutdown_handler(shutdown_handler_t handle); /** * @brief Unregister shutdown handler * * This function allows you to unregister a handler which was previously * registered using esp_register_shutdown_handler function. * - ESP_OK on success * - ESP_ERR_INVALID_STATE if the given handler hasn't been registered before */ esp_err_t esp_unregister_shutdown_handler(shutdown_handler_t handle); /** * @brief Restart PRO and APP CPUs. * * This function can be called both from PRO and APP CPUs. * After successful restart, CPU reset reason will be SW_CPU_RESET. * Peripherals (except for WiFi, BT, UART0, SPI1, and legacy timers) are not reset. * This function does not return. */ void esp_restart(void) __attribute__ ((noreturn)); /** * @brief Get reason of last reset * @return See description of esp_reset_reason_t for explanation of each value. */ esp_reset_reason_t esp_reset_reason(void); /** * @brief Get the size of available heap. * * Note that the returned value may be larger than the maximum contiguous block * which can be allocated. * * @return Available heap size, in bytes. */ uint32_t esp_get_free_heap_size(void); /** * @brief Get the size of available internal heap. * * Note that the returned value may be larger than the maximum contiguous block * which can be allocated. * * @return Available internal heap size, in bytes. */ uint32_t esp_get_free_internal_heap_size(void); /** * @brief Get the minimum heap that has ever been available * * @return Minimum free heap ever available */ uint32_t esp_get_minimum_free_heap_size( void ); /** * @brief Get one random 32-bit word from hardware RNG * * The hardware RNG is fully functional whenever an RF subsystem is running (ie Bluetooth or WiFi is enabled). For * random values, call this function after WiFi or Bluetooth are started. * * If the RF subsystem is not used by the program, the function bootloader_random_enable() can be called to enable an * entropy source. bootloader_random_disable() must be called before RF subsystem or I2S peripheral are used. See these functions' * documentation for more details. * * Any time the app is running without an RF subsystem (or bootloader_random) enabled, RNG hardware should be * considered a PRNG. A very small amount of entropy is available due to pre-seeding while the IDF * bootloader is running, but this should not be relied upon for any use. * * @return Random value between 0 and UINT32_MAX */ uint32_t esp_random(void); /** * @brief Fill a buffer with random bytes from hardware RNG * * @note This function has the same restrictions regarding available entropy as esp_random() * * @param buf Pointer to buffer to fill with random numbers. * @param len Length of buffer in bytes */ void esp_fill_random(void *buf, size_t len); /** * @brief Set base MAC address with the MAC address which is stored in BLK3 of EFUSE or * external storage e.g. flash and EEPROM. * * Base MAC address is used to generate the MAC addresses used by the networking interfaces. * If using base MAC address stored in BLK3 of EFUSE or external storage, call this API to set base MAC * address with the MAC address which is stored in BLK3 of EFUSE or external storage before initializing * WiFi/BT/Ethernet. * * @note Base MAC must be a unicast MAC (least significant bit of first byte must be zero). * * @note If not using a valid OUI, set the "locally administered" bit * (bit value 0x02 in the first byte) to avoid collisions. * * @param mac base MAC address, length: 6 bytes. * * @return ESP_OK on success * ESP_ERR_INVALID_ARG If mac is NULL or is not a unicast MAC */ esp_err_t esp_base_mac_addr_set(const uint8_t *mac); /** * @brief Return base MAC address which is set using esp_base_mac_addr_set. * * @param mac base MAC address, length: 6 bytes. * * @return ESP_OK on success * ESP_ERR_INVALID_MAC base MAC address has not been set */ esp_err_t esp_base_mac_addr_get(uint8_t *mac); /** * @brief Return base MAC address which was previously written to BLK3 of EFUSE. * * Base MAC address is used to generate the MAC addresses used by the networking interfaces. * This API returns the custom base MAC address which was previously written to BLK3 of EFUSE. * Writing this EFUSE allows setting of a different (non-Espressif) base MAC address. It is also * possible to store a custom base MAC address elsewhere, see esp_base_mac_addr_set() for details. * * @param mac base MAC address, length: 6 bytes. * * @return ESP_OK on success * ESP_ERR_INVALID_VERSION An invalid MAC version field was read from BLK3 of EFUSE * ESP_ERR_INVALID_CRC An invalid MAC CRC was read from BLK3 of EFUSE */ esp_err_t esp_efuse_mac_get_custom(uint8_t *mac); /** * @brief Return base MAC address which is factory-programmed by Espressif in BLK0 of EFUSE. * * @param mac base MAC address, length: 6 bytes. * * @return ESP_OK on success */ esp_err_t esp_efuse_mac_get_default(uint8_t *mac); /** * @brief Read base MAC address and set MAC address of the interface. * * This function first get base MAC address using esp_base_mac_addr_get or reads base MAC address * from BLK0 of EFUSE. Then set the MAC address of the interface including wifi station, wifi softap, * bluetooth and ethernet. * * @param mac MAC address of the interface, length: 6 bytes. * @param type type of MAC address, 0:wifi station, 1:wifi softap, 2:bluetooth, 3:ethernet. * * @return ESP_OK on success */ esp_err_t esp_read_mac(uint8_t* mac, esp_mac_type_t type); /** * @brief Derive local MAC address from universal MAC address. * * This function derives a local MAC address from an universal MAC address. * A `definition of local vs universal MAC address can be found on Wikipedia * `. * In ESP32, universal MAC address is generated from base MAC address in EFUSE or other external storage. * Local MAC address is derived from the universal MAC address. * * @param local_mac Derived local MAC address, length: 6 bytes. * @param universal_mac Source universal MAC address, length: 6 bytes. * * @return ESP_OK on success */ esp_err_t esp_derive_local_mac(uint8_t* local_mac, const uint8_t* universal_mac); /** * @brief Trigger a software abort * * @param details Details that will be displayed during panic handling. */ void __attribute__((noreturn)) esp_system_abort(const char* details); /** * @brief Chip models */ typedef enum { CHIP_ESP32 = 1, //!< ESP32 CHIP_ESP32S2 = 2, //!< ESP32-S2 CHIP_ESP32S3 = 4, //!< ESP32-S3 CHIP_ESP32C3 = 5, //!< ESP32-C3 } esp_chip_model_t; /* Chip feature flags, used in esp_chip_info_t */ #define CHIP_FEATURE_EMB_FLASH BIT(0) //!< Chip has embedded flash memory #define CHIP_FEATURE_WIFI_BGN BIT(1) //!< Chip has 2.4GHz WiFi #define CHIP_FEATURE_BLE BIT(4) //!< Chip has Bluetooth LE #define CHIP_FEATURE_BT BIT(5) //!< Chip has Bluetooth Classic /** * @brief The structure represents information about the chip */ typedef struct { esp_chip_model_t model; //!< chip model, one of esp_chip_model_t uint32_t features; //!< bit mask of CHIP_FEATURE_x feature flags uint8_t cores; //!< number of CPU cores uint8_t revision; //!< chip revision number } esp_chip_info_t; /** * @brief Fill an esp_chip_info_t structure with information about the chip * @param[out] out_info structure to be filled */ void esp_chip_info(esp_chip_info_t* out_info); #if CONFIG_ESP32_ECO3_CACHE_LOCK_FIX /** * @brief Cache lock bug exists or not * * @return * - ture : bug exists * - false : bug not exists */ bool soc_has_cache_lock_bug(void); #endif #ifdef __cplusplus } #endif #endif /* __ESP_SYSTEM_H__ */