/****************************************************************************** * * Copyright (C) 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #ifndef HCIMSGS_H #define HCIMSGS_H #include "common/bt_target.h" #include "stack/hcidefs.h" #include "stack/bt_types.h" void bte_main_hci_send(BT_HDR *p_msg, UINT16 event); void bte_main_lpm_allow_bt_device_sleep(void); /* Message by message.... */ BOOLEAN btsnd_hcic_inquiry(const LAP inq_lap, UINT8 duration, UINT8 response_cnt); #define HCIC_PARAM_SIZE_INQUIRY 5 #define HCIC_INQ_INQ_LAP_OFF 0 #define HCIC_INQ_DUR_OFF 3 #define HCIC_INQ_RSP_CNT_OFF 4 /* Inquiry */ /* Inquiry Cancel */ BOOLEAN btsnd_hcic_inq_cancel(void); #define HCIC_PARAM_SIZE_INQ_CANCEL 0 /* Periodic Inquiry Mode */ BOOLEAN btsnd_hcic_per_inq_mode(UINT16 max_period, UINT16 min_period, const LAP inq_lap, UINT8 duration, UINT8 response_cnt); #define HCIC_PARAM_SIZE_PER_INQ_MODE 9 #define HCI_PER_INQ_MAX_INTRVL_OFF 0 #define HCI_PER_INQ_MIN_INTRVL_OFF 2 #define HCI_PER_INQ_INQ_LAP_OFF 4 #define HCI_PER_INQ_DURATION_OFF 7 #define HCI_PER_INQ_RSP_CNT_OFF 8 /* Periodic Inquiry Mode */ /* Exit Periodic Inquiry Mode */ BOOLEAN btsnd_hcic_exit_per_inq(void); #define HCIC_PARAM_SIZE_EXIT_PER_INQ 0 /* Create Connection */ BOOLEAN btsnd_hcic_create_conn(BD_ADDR dest, UINT16 packet_types, UINT8 page_scan_rep_mode, UINT8 page_scan_mode, UINT16 clock_offset, UINT8 allow_switch); #define HCIC_PARAM_SIZE_CREATE_CONN 13 #define HCIC_CR_CONN_BD_ADDR_OFF 0 #define HCIC_CR_CONN_PKT_TYPES_OFF 6 #define HCIC_CR_CONN_REP_MODE_OFF 8 #define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9 #define HCIC_CR_CONN_CLK_OFF_OFF 10 #define HCIC_CR_CONN_ALLOW_SWITCH_OFF 12 /* Create Connection */ /* Disconnect */ BOOLEAN btsnd_hcic_disconnect(UINT16 handle, UINT8 reason); #define HCIC_PARAM_SIZE_DISCONNECT 3 #define HCI_DISC_HANDLE_OFF 0 #define HCI_DISC_REASON_OFF 2 /* Disconnect */ #if BTM_SCO_INCLUDED == TRUE /* Add SCO Connection */ BOOLEAN btsnd_hcic_add_SCO_conn (UINT16 handle, UINT16 packet_types); #endif /* BTM_SCO_INCLUDED */ #define HCIC_PARAM_SIZE_ADD_SCO_CONN 4 #define HCI_ADD_SCO_HANDLE_OFF 0 #define HCI_ADD_SCO_PACKET_TYPES_OFF 2 /* Add SCO Connection */ /* Create Connection Cancel */ BOOLEAN btsnd_hcic_create_conn_cancel(BD_ADDR dest); #define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL 6 #define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF 0 /* Create Connection Cancel */ /* Accept Connection Request */ BOOLEAN btsnd_hcic_accept_conn (BD_ADDR bd_addr, UINT8 role); #define HCIC_PARAM_SIZE_ACCEPT_CONN 7 #define HCI_ACC_CONN_BD_ADDR_OFF 0 #define HCI_ACC_CONN_ROLE_OFF 6 /* Accept Connection Request */ /* Reject Connection Request */ BOOLEAN btsnd_hcic_reject_conn (BD_ADDR bd_addr, UINT8 reason); #define HCIC_PARAM_SIZE_REJECT_CONN 7 #define HCI_REJ_CONN_BD_ADDR_OFF 0 #define HCI_REJ_CONN_REASON_OFF 6 /* Reject Connection Request */ /* Link Key Request Reply */ BOOLEAN btsnd_hcic_link_key_req_reply (BD_ADDR bd_addr, LINK_KEY link_key); #define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY 22 #define HCI_LINK_KEY_REPLY_BD_ADDR_OFF 0 #define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6 /* Link Key Request Reply */ /* Link Key Request Neg Reply */ BOOLEAN btsnd_hcic_link_key_neg_reply (BD_ADDR bd_addr); #define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY 6 #define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0 /* Link Key Request Neg Reply */ /* PIN Code Request Reply */ BOOLEAN btsnd_hcic_pin_code_req_reply (BD_ADDR bd_addr, UINT8 pin_code_len, PIN_CODE pin_code); #define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY 23 #define HCI_PIN_CODE_REPLY_BD_ADDR_OFF 0 #define HCI_PIN_CODE_REPLY_PIN_LEN_OFF 6 #define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7 /* PIN Code Request Reply */ /* Link Key Request Neg Reply */ BOOLEAN btsnd_hcic_pin_code_neg_reply (BD_ADDR bd_addr); #define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY 6 #define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0 /* Link Key Request Neg Reply */ /* Change Connection Type */ BOOLEAN btsnd_hcic_change_conn_type (UINT16 handle, UINT16 packet_types); #define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE 4 #define HCI_CHNG_PKT_TYPE_HANDLE_OFF 0 #define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF 2 /* Change Connection Type */ #define HCIC_PARAM_SIZE_CMD_HANDLE 2 #define HCI_CMD_HANDLE_HANDLE_OFF 0 BOOLEAN btsnd_hcic_auth_request (UINT16 handle); /* Authentication Request */ /* Set Connection Encryption */ BOOLEAN btsnd_hcic_set_conn_encrypt (UINT16 handle, BOOLEAN enable); #define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT 3 #define HCI_SET_ENCRYPT_HANDLE_OFF 0 #define HCI_SET_ENCRYPT_ENABLE_OFF 2 /* Set Connection Encryption */ /* Remote Name Request */ BOOLEAN btsnd_hcic_rmt_name_req (BD_ADDR bd_addr, UINT8 page_scan_rep_mode, UINT8 page_scan_mode, UINT16 clock_offset); #define HCIC_PARAM_SIZE_RMT_NAME_REQ 10 #define HCI_RMT_NAME_BD_ADDR_OFF 0 #define HCI_RMT_NAME_REP_MODE_OFF 6 #define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7 #define HCI_RMT_NAME_CLK_OFF_OFF 8 /* Remote Name Request */ /* Remote Name Request Cancel */ BOOLEAN btsnd_hcic_rmt_name_req_cancel(BD_ADDR bd_addr); #define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL 6 #define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF 0 /* Remote Name Request Cancel */ BOOLEAN btsnd_hcic_rmt_features_req(UINT16 handle); /* Remote Features Request */ /* Remote Extended Features */ BOOLEAN btsnd_hcic_rmt_ext_features(UINT16 handle, UINT8 page_num); #define HCIC_PARAM_SIZE_RMT_EXT_FEATURES 3 #define HCI_RMT_EXT_FEATURES_HANDLE_OFF 0 #define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF 2 /* Remote Extended Features */ BOOLEAN btsnd_hcic_rmt_ver_req(UINT16 handle); /* Remote Version Info Request */ BOOLEAN btsnd_hcic_read_rmt_clk_offset(UINT16 handle); /* Remote Clock Offset */ BOOLEAN btsnd_hcic_read_lmp_handle(UINT16 handle); /* Remote LMP Handle */ BOOLEAN btsnd_hcic_setup_esco_conn (UINT16 handle, UINT32 tx_bw, UINT32 rx_bw, UINT16 max_latency, UINT16 voice, UINT8 retrans_effort, UINT16 packet_types); #define HCIC_PARAM_SIZE_SETUP_ESCO 17 #define HCI_SETUP_ESCO_HANDLE_OFF 0 #define HCI_SETUP_ESCO_TX_BW_OFF 2 #define HCI_SETUP_ESCO_RX_BW_OFF 6 #define HCI_SETUP_ESCO_MAX_LAT_OFF 10 #define HCI_SETUP_ESCO_VOICE_OFF 12 #define HCI_SETUP_ESCO_RETRAN_EFF_OFF 14 #define HCI_SETUP_ESCO_PKT_TYPES_OFF 15 BOOLEAN btsnd_hcic_accept_esco_conn (BD_ADDR bd_addr, UINT32 tx_bw, UINT32 rx_bw, UINT16 max_latency, UINT16 content_fmt, UINT8 retrans_effort, UINT16 packet_types); #define HCIC_PARAM_SIZE_ACCEPT_ESCO 21 #define HCI_ACCEPT_ESCO_BDADDR_OFF 0 #define HCI_ACCEPT_ESCO_TX_BW_OFF 6 #define HCI_ACCEPT_ESCO_RX_BW_OFF 10 #define HCI_ACCEPT_ESCO_MAX_LAT_OFF 14 #define HCI_ACCEPT_ESCO_VOICE_OFF 16 #define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF 18 #define HCI_ACCEPT_ESCO_PKT_TYPES_OFF 19 BOOLEAN btsnd_hcic_reject_esco_conn (BD_ADDR bd_addr, UINT8 reason); #define HCIC_PARAM_SIZE_REJECT_ESCO 7 #define HCI_REJECT_ESCO_BDADDR_OFF 0 #define HCI_REJECT_ESCO_REASON_OFF 6 /* Hold Mode */ BOOLEAN btsnd_hcic_hold_mode(UINT16 handle, UINT16 max_hold_period, UINT16 min_hold_period); #define HCIC_PARAM_SIZE_HOLD_MODE 6 #define HCI_HOLD_MODE_HANDLE_OFF 0 #define HCI_HOLD_MODE_MAX_PER_OFF 2 #define HCI_HOLD_MODE_MIN_PER_OFF 4 /* Hold Mode */ /** * Sniff Mode * sniff_attempt should no more than 0xFF */ BOOLEAN btsnd_hcic_sniff_mode(UINT16 handle, UINT16 max_sniff_period, UINT16 min_sniff_period, UINT16 sniff_attempt, UINT16 sniff_timeout); #define HCIC_PARAM_SIZE_SNIFF_MODE 10 #define HCI_SNIFF_MODE_HANDLE_OFF 0 #define HCI_SNIFF_MODE_MAX_PER_OFF 2 #define HCI_SNIFF_MODE_MIN_PER_OFF 4 #define HCI_SNIFF_MODE_ATTEMPT_OFF 6 #define HCI_SNIFF_MODE_TIMEOUT_OFF 8 /* Sniff Mode */ BOOLEAN btsnd_hcic_exit_sniff_mode(UINT16 handle); /* Exit Sniff Mode */ /* Park Mode */ BOOLEAN btsnd_hcic_park_mode (UINT16 handle, UINT16 beacon_max_interval, UINT16 beacon_min_interval); #define HCIC_PARAM_SIZE_PARK_MODE 6 #define HCI_PARK_MODE_HANDLE_OFF 0 #define HCI_PARK_MODE_MAX_PER_OFF 2 #define HCI_PARK_MODE_MIN_PER_OFF 4 /* Park Mode */ BOOLEAN btsnd_hcic_exit_park_mode(UINT16 handle); /* Exit Park Mode */ /* QoS Setup */ BOOLEAN btsnd_hcic_qos_setup (UINT16 handle, UINT8 flags, UINT8 service_type, UINT32 token_rate, UINT32 peak, UINT32 latency, UINT32 delay_var); #define HCIC_PARAM_SIZE_QOS_SETUP 20 #define HCI_QOS_HANDLE_OFF 0 #define HCI_QOS_FLAGS_OFF 2 #define HCI_QOS_SERVICE_TYPE_OFF 3 #define HCI_QOS_TOKEN_RATE_OFF 4 #define HCI_QOS_PEAK_BANDWIDTH_OFF 8 #define HCI_QOS_LATENCY_OFF 12 #define HCI_QOS_DELAY_VAR_OFF 16 /* QoS Setup */ /* Switch Role Request */ BOOLEAN btsnd_hcic_switch_role (BD_ADDR bd_addr, UINT8 role); #define HCIC_PARAM_SIZE_SWITCH_ROLE 7 #define HCI_SWITCH_BD_ADDR_OFF 0 #define HCI_SWITCH_ROLE_OFF 6 /* Switch Role Request */ /* Write Policy Settings */ BOOLEAN btsnd_hcic_write_policy_set(UINT16 handle, UINT16 settings); #define HCIC_PARAM_SIZE_WRITE_POLICY_SET 4 #define HCI_WRITE_POLICY_HANDLE_OFF 0 #define HCI_WRITE_POLICY_SETTINGS_OFF 2 /* Write Policy Settings */ /* Write Default Policy Settings */ BOOLEAN btsnd_hcic_write_def_policy_set(UINT16 settings); #define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET 2 #define HCI_WRITE_DEF_POLICY_SETTINGS_OFF 0 /* Write Default Policy Settings */ /****************************************** ** Lisbon Features *******************************************/ #if BTM_SSR_INCLUDED == TRUE /* Sniff Subrating */ BOOLEAN btsnd_hcic_sniff_sub_rate(UINT16 handle, UINT16 max_lat, UINT16 min_remote_lat, UINT16 min_local_lat); #define HCIC_PARAM_SIZE_SNIFF_SUB_RATE 8 #define HCI_SNIFF_SUB_RATE_HANDLE_OFF 0 #define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF 2 #define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF 4 #define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF 6 /* Sniff Subrating */ #else /* BTM_SSR_INCLUDED == FALSE */ #define btsnd_hcic_sniff_sub_rate(handle, max_lat, min_remote_lat, min_local_lat) FALSE #endif /* BTM_SSR_INCLUDED */ /* Extended Inquiry Response */ void btsnd_hcic_write_ext_inquiry_response(void *buffer, UINT8 fec_req); #define HCIC_PARAM_SIZE_EXT_INQ_RESP 241 #define HCIC_EXT_INQ_RESP_FEC_OFF 0 #define HCIC_EXT_INQ_RESP_RESPONSE 1 /* IO Capabilities Response */ BOOLEAN btsnd_hcic_io_cap_req_reply (BD_ADDR bd_addr, UINT8 capability, UINT8 oob_present, UINT8 auth_req); #define HCIC_PARAM_SIZE_IO_CAP_RESP 9 #define HCI_IO_CAP_BD_ADDR_OFF 0 #define HCI_IO_CAPABILITY_OFF 6 #define HCI_IO_CAP_OOB_DATA_OFF 7 #define HCI_IO_CAP_AUTH_REQ_OFF 8 /* IO Capabilities Req Neg Reply */ BOOLEAN btsnd_hcic_io_cap_req_neg_reply (BD_ADDR bd_addr, UINT8 err_code); #define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7 #define HCI_IO_CAP_NR_BD_ADDR_OFF 0 #define HCI_IO_CAP_NR_ERR_CODE 6 /* Read Local OOB Data */ BOOLEAN btsnd_hcic_read_local_oob_data (void); #define HCIC_PARAM_SIZE_R_LOCAL_OOB 0 BOOLEAN btsnd_hcic_user_conf_reply (BD_ADDR bd_addr, BOOLEAN is_yes); #define HCIC_PARAM_SIZE_UCONF_REPLY 6 #define HCI_USER_CONF_BD_ADDR_OFF 0 BOOLEAN btsnd_hcic_user_passkey_reply (BD_ADDR bd_addr, UINT32 value); #define HCIC_PARAM_SIZE_U_PKEY_REPLY 10 #define HCI_USER_PASSKEY_BD_ADDR_OFF 0 #define HCI_USER_PASSKEY_VALUE_OFF 6 BOOLEAN btsnd_hcic_user_passkey_neg_reply (BD_ADDR bd_addr); #define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6 #define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0 /* Remote OOB Data Request Reply */ BOOLEAN btsnd_hcic_rem_oob_reply (BD_ADDR bd_addr, UINT8 *p_c, UINT8 *p_r); #define HCIC_PARAM_SIZE_REM_OOB_REPLY 38 #define HCI_REM_OOB_DATA_BD_ADDR_OFF 0 #define HCI_REM_OOB_DATA_C_OFF 6 #define HCI_REM_OOB_DATA_R_OFF 22 /* Remote OOB Data Request Negative Reply */ BOOLEAN btsnd_hcic_rem_oob_neg_reply (BD_ADDR bd_addr); #define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY 6 #define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF 0 /* Read Tx Power Level */ BOOLEAN btsnd_hcic_read_inq_tx_power (void); #define HCIC_PARAM_SIZE_R_TX_POWER 0 /* Read Default Erroneous Data Reporting */ BOOLEAN btsnd_hcic_read_default_erroneous_data_rpt (void); #define HCIC_PARAM_SIZE_R_ERR_DATA_RPT 0 #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE BOOLEAN btsnd_hcic_enhanced_flush (UINT16 handle, UINT8 packet_type); #define HCIC_PARAM_SIZE_ENHANCED_FLUSH 3 #endif BOOLEAN btsnd_hcic_send_keypress_notif (BD_ADDR bd_addr, UINT8 notif); #define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF 7 #define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF 0 #define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF 6 /**** end of Simple Pairing Commands ****/ /* Store Current Settings */ #define MAX_FILT_COND (sizeof (BD_ADDR) + 1) BOOLEAN btsnd_hcic_set_event_filter(UINT8 filt_type, UINT8 filt_cond_type, UINT8 *filt_cond, UINT8 filt_cond_len); #define HCIC_PARAM_SIZE_SET_EVT_FILTER 9 #define HCI_FILT_COND_FILT_TYPE_OFF 0 #define HCI_FILT_COND_COND_TYPE_OFF 1 #define HCI_FILT_COND_FILT_OFF 2 /* Set Event Filter */ /* Delete Stored Key */ BOOLEAN btsnd_hcic_delete_stored_key (BD_ADDR bd_addr, BOOLEAN delete_all_flag); #define HCIC_PARAM_SIZE_DELETE_STORED_KEY 7 #define HCI_DELETE_KEY_BD_ADDR_OFF 0 #define HCI_DELETE_KEY_ALL_FLAG_OFF 6 /* Delete Stored Key */ /* Change Local Name */ BOOLEAN btsnd_hcic_change_name(BD_NAME name); #define HCIC_PARAM_SIZE_CHANGE_NAME BD_NAME_LEN #define HCI_CHANGE_NAME_NAME_OFF 0 /* Change Local Name */ #define HCIC_PARAM_SIZE_READ_CMD 0 #define HCIC_PARAM_SIZE_WRITE_PARAM1 1 #define HCIC_WRITE_PARAM1_PARAM_OFF 0 #define HCIC_PARAM_SIZE_WRITE_PARAM2 2 #define HCIC_WRITE_PARAM2_PARAM_OFF 0 #define HCIC_PARAM_SIZE_WRITE_PARAM3 3 #define HCIC_WRITE_PARAM3_PARAM_OFF 0 #define HCIC_PARAM_SIZE_SET_AFH_CHANNELS 10 BOOLEAN btsnd_hcic_write_pin_type(UINT8 type); /* Write PIN Type */ BOOLEAN btsnd_hcic_write_auto_accept(UINT8 flag); /* Write Auto Accept */ BOOLEAN btsnd_hcic_read_name (void); /* Read Local Name */ BOOLEAN btsnd_hcic_write_page_tout(UINT16 timeout); /* Write Page Timout */ BOOLEAN btsnd_hcic_write_scan_enable(UINT8 flag); /* Write Scan Enable */ BOOLEAN btsnd_hcic_write_pagescan_cfg(UINT16 interval, UINT16 window); /* Write Page Scan Activity */ #define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG 4 #define HCI_SCAN_CFG_INTERVAL_OFF 0 #define HCI_SCAN_CFG_WINDOW_OFF 2 /* Write Page Scan Activity */ /* Write Inquiry Scan Activity */ BOOLEAN btsnd_hcic_write_inqscan_cfg(UINT16 interval, UINT16 window); #define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG 4 #define HCI_SCAN_CFG_INTERVAL_OFF 0 #define HCI_SCAN_CFG_WINDOW_OFF 2 /* Write Inquiry Scan Activity */ BOOLEAN btsnd_hcic_write_auth_enable(UINT8 flag); /* Write Authentication Enable */ BOOLEAN btsnd_hcic_write_dev_class(DEV_CLASS dev); /* Write Class of Device */ BOOLEAN btsnd_hcic_write_voice_settings(UINT16 flags); /* Write Voice Settings */ /* Host Controller to Host flow control */ #define HCI_HOST_FLOW_CTRL_OFF 0 #define HCI_HOST_FLOW_CTRL_ACL_ON 1 #define HCI_HOST_FLOW_CTRL_SCO_ON 2 #define HCI_HOST_FLOW_CTRL_BOTH_ON 3 #define HCI_HOST_FLOW_CTRL_ADV_REPORT_OFF 0 #define HCI_HOST_FLOW_CTRL_ADV_REPORT_ON 1 BOOLEAN btsnd_hcic_write_auto_flush_tout(UINT16 handle, UINT16 timeout); /* Write Retransmit Timout */ #define HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT 4 #define HCI_FLUSH_TOUT_HANDLE_OFF 0 #define HCI_FLUSH_TOUT_TOUT_OFF 2 BOOLEAN btsnd_hcic_read_tx_power(UINT16 handle, UINT8 type); /* Read Tx Power */ #define HCIC_PARAM_SIZE_READ_TX_POWER 3 #define HCI_READ_TX_POWER_HANDLE_OFF 0 #define HCI_READ_TX_POWER_TYPE_OFF 2 /* Read transmit power level parameter */ #define HCI_READ_CURRENT 0x00 #define HCI_READ_MAXIMUM 0x01 BOOLEAN btsnd_hcic_host_num_xmitted_pkts (UINT8 num_handles, UINT16 *handle, UINT16 *num_pkts); /* Set Host Buffer Size */ #define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE sizeof(btmsg_hcic_num_pkts_done_t) #define MAX_DATA_HANDLES 10 #define HCI_PKTS_DONE_NUM_HANDLES_OFF 0 #define HCI_PKTS_DONE_HANDLE_OFF 1 #define HCI_PKTS_DONE_NUM_PKTS_OFF 3 /* Write Link Supervision Timeout */ BOOLEAN btsnd_hcic_write_link_super_tout(UINT8 local_controller_id, UINT16 handle, UINT16 timeout); #define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT 4 #define HCI_LINK_SUPER_TOUT_HANDLE_OFF 0 #define HCI_LINK_SUPER_TOUT_TOUT_OFF 2 /* Write Link Supervision Timeout */ BOOLEAN btsnd_hcic_write_cur_iac_lap (UINT8 num_cur_iac, LAP *const iac_lap); /* Write Current IAC LAP */ #define MAX_IAC_LAPS 0x40 #define HCI_WRITE_IAC_LAP_NUM_OFF 0 #define HCI_WRITE_IAC_LAP_LAP_OFF 1 /* Write Current IAC LAP */ BOOLEAN btsnd_hcic_get_link_quality (UINT16 handle); /* Get Link Quality */ BOOLEAN btsnd_hcic_read_rssi (UINT16 handle); /* Read RSSI */ BOOLEAN btsnd_hcic_enable_test_mode (void); /* Enable Device Under Test Mode */ BOOLEAN btsnd_hcic_write_pagescan_type(UINT8 type); /* Write Page Scan Type */ BOOLEAN btsnd_hcic_write_inqscan_type(UINT8 type); /* Write Inquiry Scan Type */ BOOLEAN btsnd_hcic_write_inquiry_mode(UINT8 type); /* Write Inquiry Mode */ #define HCI_DATA_HANDLE_MASK 0x0FFF #define HCID_GET_HANDLE_EVENT(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \ (*((UINT8 *)((p) + 1) + p->offset + 1) << 8))) #define HCID_GET_HANDLE(u16) (UINT16)((u16) & HCI_DATA_HANDLE_MASK) #define HCI_DATA_EVENT_MASK 3 #define HCI_DATA_EVENT_OFFSET 12 #define HCID_GET_EVENT(u16) (UINT8)(((u16) >> HCI_DATA_EVENT_OFFSET) & HCI_DATA_EVENT_MASK) #define HCI_DATA_BCAST_MASK 3 #define HCI_DATA_BCAST_OFFSET 10 #define HCID_GET_BCAST(u16) (UINT8)(((u16) >> HCI_DATA_BCAST_OFFSET) & HCI_DATA_BCAST_MASK) #define HCID_GET_ACL_LEN(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 2) + \ (*((UINT8 *)((p) + 1) + p->offset + 3) << 8))) #define HCID_HEADER_SIZE 4 #define HCID_GET_SCO_LEN(p) (*((UINT8 *)((p) + 1) + p->offset + 2)) void btsnd_hcic_vendor_spec_cmd (void *buffer, UINT16 opcode, UINT8 len, UINT8 *p_data, void *p_cmd_cplt_cback); #if (BLE_INCLUDED == TRUE) /******************************************************************************** ** BLE Commands ** Note: "local_controller_id" is for transport, not counted in HCI message size *********************************************************************************/ #define HCIC_BLE_RAND_DI_SIZE 8 #define HCIC_BLE_ENCRYT_KEY_SIZE 16 #define HCIC_BLE_IRK_SIZE 16 #define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD 8 #define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD 6 #define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS 15 #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP 31 #define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE 1 #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM 7 #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE 2 #define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN 25 #define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL 0 #define HCIC_PARAM_SIZE_CLEAR_WHITE_LIST 0 #define HCIC_PARAM_SIZE_ADD_WHITE_LIST 7 #define HCIC_PARAM_SIZE_REMOVE_WHITE_LIST 7 #define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS 14 #define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS 5 #define HCIC_PARAM_SIZE_READ_CHNL_MAP 2 #define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT 2 #define HCIC_PARAM_SIZE_BLE_ENCRYPT 32 #define HCIC_PARAM_SIZE_BLE_RAND 0 #define HCIC_PARAM_SIZE_WRITE_LE_HOST_SUPPORTED 2 #define HCIC_BLE_RAND_DI_SIZE 8 #define HCIC_BLE_ENCRYT_KEY_SIZE 16 #define HCIC_PARAM_SIZE_BLE_START_ENC (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYT_KEY_SIZE) #define HCIC_PARAM_SIZE_LTK_REQ_REPLY (2 + HCIC_BLE_ENCRYT_KEY_SIZE) #define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY 2 #define HCIC_BLE_CHNL_MAP_SIZE 5 #define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA 31 #define HCIC_PARAM_SIZE_BLE_ADD_DEV_RESOLVING_LIST (7 + HCIC_BLE_IRK_SIZE * 2) #define HCIC_PARAM_SIZE_BLE_RM_DEV_RESOLVING_LIST 7 #define HCIC_PARAM_SIZE_BLE_CLEAR_RESOLVING_LIST 0 #define HCIC_PARAM_SIZE_BLE_READ_RESOLVING_LIST_SIZE 0 #define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_PEER 7 #define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_LOCAL 7 #define HCIC_PARAM_SIZE_BLE_SET_ADDR_RESOLUTION_ENABLE 1 #define HCIC_PARAM_SIZE_BLE_SET_RAND_PRIV_ADDR_TIMOUT 2 #define HCIC_PARAM_SIZE_BLE_SET_DATA_LENGTH 6 #define HCIC_PARAM_SIZE_BLE_WRITE_EXTENDED_SCAN_PARAM 11 #define HCIC_PARAM_SIZE_BLE_UPDATE_ADV_FLOW_CONTROL 2 /* ULP HCI command */ BOOLEAN btsnd_hcic_ble_set_evt_mask (BT_EVENT_MASK event_mask); BOOLEAN btsnd_hcic_ble_read_buffer_size (void); BOOLEAN btsnd_hcic_ble_read_local_spt_feat (void); BOOLEAN btsnd_hcic_ble_set_local_used_feat (UINT8 feat_set[8]); BOOLEAN btsnd_hcic_ble_set_random_addr (BD_ADDR random_addr); BOOLEAN btsnd_hcic_ble_write_adv_params (UINT16 adv_int_min, UINT16 adv_int_max, UINT8 adv_type, UINT8 addr_type_own, UINT8 addr_type_dir, BD_ADDR direct_bda, UINT8 channel_map, UINT8 adv_filter_policy); BOOLEAN btsnd_hcic_ble_read_adv_chnl_tx_power (void); BOOLEAN btsnd_hcic_ble_set_adv_data (UINT8 data_len, UINT8 *p_data); BOOLEAN btsnd_hcic_ble_set_scan_rsp_data (UINT8 data_len, UINT8 *p_scan_rsp); BOOLEAN btsnd_hcic_ble_set_adv_enable (UINT8 adv_enable); BOOLEAN btsnd_hcic_ble_set_scan_params (UINT8 scan_type, UINT16 scan_int, UINT16 scan_win, UINT8 addr_type, UINT8 scan_filter_policy); BOOLEAN btsnd_hcic_ble_set_scan_enable (UINT8 scan_enable, UINT8 duplicate); BOOLEAN btsnd_hcic_ble_create_ll_conn (UINT16 scan_int, UINT16 scan_win, UINT8 init_filter_policy, UINT8 addr_type_peer, BD_ADDR bda_peer, UINT8 addr_type_own, UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_ce_len, UINT16 max_ce_len); BOOLEAN btsnd_hcic_ble_create_conn_cancel (void); BOOLEAN btsnd_hcic_ble_read_white_list_size (void); BOOLEAN btsnd_hcic_ble_clear_white_list (void); BOOLEAN btsnd_hcic_ble_add_white_list (UINT8 addr_type, BD_ADDR bda); BOOLEAN btsnd_hcic_ble_remove_from_white_list (UINT8 addr_type, BD_ADDR bda); BOOLEAN btsnd_hcic_ble_upd_ll_conn_params (UINT16 handle, UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_len, UINT16 max_len); BOOLEAN btsnd_hcic_ble_set_host_chnl_class (UINT8 chnl_map[HCIC_BLE_CHNL_MAP_SIZE]); BOOLEAN btsnd_hcic_ble_read_chnl_map (UINT16 handle); BOOLEAN btsnd_hcic_ble_read_remote_feat ( UINT16 handle); BOOLEAN btsnd_hcic_ble_encrypt (UINT8 *key, UINT8 key_len, UINT8 *plain_text, UINT8 pt_len, void *p_cmd_cplt_cback); BOOLEAN btsnd_hcic_ble_rand (void *p_cmd_cplt_cback); BOOLEAN btsnd_hcic_ble_start_enc ( UINT16 handle, UINT8 rand[HCIC_BLE_RAND_DI_SIZE], UINT16 ediv, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]); BOOLEAN btsnd_hcic_ble_ltk_req_reply (UINT16 handle, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]); BOOLEAN btsnd_hcic_ble_ltk_req_neg_reply (UINT16 handle); BOOLEAN btsnd_hcic_ble_read_supported_states (void); BOOLEAN btsnd_hcic_ble_write_host_supported (UINT8 le_host_spt, UINT8 simul_le_host_spt); BOOLEAN btsnd_hcic_ble_read_host_supported (void); BOOLEAN btsnd_hcic_ble_receiver_test(UINT8 rx_freq); BOOLEAN btsnd_hcic_ble_transmitter_test(UINT8 tx_freq, UINT8 test_data_len, UINT8 payload); BOOLEAN btsnd_hcic_ble_test_end(void); #if (defined BLE_LLT_INCLUDED) && (BLE_LLT_INCLUDED == TRUE) #define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_REPLY 14 BOOLEAN btsnd_hcic_ble_rc_param_req_reply(UINT16 handle, UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_ce_len, UINT16 max_ce_len); #define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_NEG_REPLY 3 BOOLEAN btsnd_hcic_ble_rc_param_req_neg_reply(UINT16 handle, UINT8 reason); #endif /* BLE_LLT_INCLUDED */ BOOLEAN btsnd_hcic_ble_set_data_length(UINT16 conn_handle, UINT16 tx_octets, UINT16 tx_time); BOOLEAN btsnd_hcic_ble_add_device_resolving_list (UINT8 addr_type_peer, BD_ADDR bda_peer, UINT8 irk_peer[HCIC_BLE_IRK_SIZE], UINT8 irk_local[HCIC_BLE_IRK_SIZE]); BOOLEAN btsnd_hcic_ble_rm_device_resolving_list (UINT8 addr_type_peer, BD_ADDR bda_peer); BOOLEAN btsnd_hcic_ble_clear_resolving_list (void); BOOLEAN btsnd_hcic_ble_read_resolvable_addr_peer (UINT8 addr_type_peer, BD_ADDR bda_peer); BOOLEAN btsnd_hcic_ble_read_resolvable_addr_local (UINT8 addr_type_peer, BD_ADDR bda_peer); BOOLEAN btsnd_hcic_ble_set_addr_resolution_enable (UINT8 addr_resolution_enable); BOOLEAN btsnd_hcic_ble_set_rand_priv_addr_timeout (UINT16 rpa_timout); #endif /* BLE_INCLUDED */ BOOLEAN btsnd_hcic_read_authenticated_payload_tout(UINT16 handle); BOOLEAN btsnd_hcic_write_authenticated_payload_tout(UINT16 handle, UINT16 timeout); BOOLEAN btsnd_hcic_ble_update_adv_report_flow_control (UINT16 num); #define HCIC_PARAM_SIZE_WRITE_AUTHENT_PAYLOAD_TOUT 4 #define HCI__WRITE_AUTHENT_PAYLOAD_TOUT_HANDLE_OFF 0 #define HCI__WRITE_AUTHENT_PAYLOAD_TOUT_TOUT_OFF 2 #endif