*********************************************
Standard Setup of Toolchain for Linux
*********************************************

:link_to_translation:`zh_CN:[中文]`

Install Prerequisites
=====================

To compile with ESP-IDF you need to get the following packages. The command to run depends on which distribution of Linux you are using:

- Ubuntu and Debian::

    sudo apt-get install git wget flex bison gperf python3 python3-pip python3-setuptools cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0

- CentOS 7 & 8::

    sudo yum -y update && sudo yum install git wget flex bison gperf python3 cmake ninja-build ccache dfu-util libusbx

CentOS 7 is still supported but CentOS version 8 is recommended for a better user experience.

- Arch::

    sudo pacman -S --needed gcc git make flex bison gperf python-pip cmake ninja ccache dfu-util libusb

.. note::
    - CMake version 3.5 or newer is required for use with ESP-IDF. Older Linux distributions may require updating, enabling of a "backports" repository, or installing of a "cmake3" package rather than "cmake".
    - If you do not see your Linux distribution in the above list then please check its documentation to find out which command to use for package installation.

Additional Tips
===============

Permission issues /dev/ttyUSB0
------------------------------

With some Linux distributions you may get the ``Failed to open port /dev/ttyUSB0`` error message when flashing the {IDF_TARGET_NAME}. :ref:`This can be solved by adding the current user to the dialout group<linux-dialout-group>`.

Setting up Python 3 as default for CentOS
-----------------------------------------

CentOS 7 and older is providing Python 2.7 as the default interpreter.
Python 3 is recommended instead and can be installed in old distributions as follows, or please consult the documentation of your operating system for other recommended ways to achieve this::

    sudo yum -y update && sudo yum install python3 python3-pip python3-setuptools

Making Python 3 the default interpreter is possible by running::

    sudo update-alternatives --install /usr/bin/python python /usr/bin/python3 10 && alias pip=pip3

Setting up Python 3 as default for Ubuntu and Debian
----------------------------------------------------

Ubuntu (version 18.04 and older) and Debian (version 9 and older) are still providing Python 2.7 as the default interpreter.
Python 3 is recommended instead and can be installed in old distributions as follows, or please consult the documentation of your operating system for other recommended ways to achieve this::

    sudo apt-get install python3 python3-pip python3-setuptools

Making Python 3 the default interpreter is possible by running::

    sudo update-alternatives --install /usr/bin/python python /usr/bin/python3 10 && alias pip=pip3

.. note::
    This is system-wide change which may affect all of the applications.

Fixing broken pip on Ubuntu 16.04
=================================

Package ``python3-pip`` could be broken without possibility to upgrade it. 
Package has to be removed and installed manually using script `get-pip.py <https://bootstrap.pypa.io/get-pip.py>`_.::

    apt remove python3-pip python3-virtualenv; rm -r ~/.local
    rm -r ~/.espressif/python_env && python get-pip.py

Python 2 deprecation
====================

Python 2 reached its `end of life <https://www.python.org/doc/sunset-python-2/>`_ and support for it in ESP-IDF will be removed soon. Please install Python 3.6 or higher. Instructions for popular Linux distributions are listed above.

Next Steps
==========

To carry on with development environment setup, proceed to :ref:`get-started-get-esp-idf`.


.. _AUR: https://wiki.archlinux.org/index.php/Arch_User_Repository