/*
 * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#pragma once

#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "soc/soc_caps.h"
#include "hal/parlio_types.h"
#include "hal/parlio_hal.h"
#include "hal/parlio_ll.h"
#include "hal/dma_types.h"
#include "hal/cache_hal.h"
#include "hal/cache_ll.h"
#include "rom/cache.h"
#include "esp_heap_caps.h"
#include "driver/parlio_types.h"
#include "esp_private/periph_ctrl.h"

#if CONFIG_PARLIO_ISR_IRAM_SAFE
#define PARLIO_MEM_ALLOC_CAPS    (MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT)
#else
#define PARLIO_MEM_ALLOC_CAPS    MALLOC_CAP_DEFAULT
#endif

#if SOC_PARLIO_TX_RX_SHARE_INTERRUPT
#define PARLIO_INTR_ALLOC_FLAG_SHARED ESP_INTR_FLAG_SHARED
#else
#define PARLIO_INTR_ALLOC_FLAG_SHARED 0
#endif

#if CONFIG_PARLIO_ISR_IRAM_SAFE
#define PARLIO_INTR_ALLOC_FLAG   (ESP_INTR_FLAG_LOWMED | PARLIO_INTR_ALLOC_FLAG_SHARED | ESP_INTR_FLAG_IRAM)
#else
#define PARLIO_INTR_ALLOC_FLAG   (ESP_INTR_FLAG_LOWMED | PARLIO_INTR_ALLOC_FLAG_SHARED)
#endif

#if SOC_GDMA_TRIG_PERIPH_PARLIO0_BUS == SOC_GDMA_BUS_AXI
/* The parlio peripheral uses DMA via AXI bus, which requires the descriptor aligned with 8 */
typedef dma_descriptor_align8_t parlio_dma_desc_t;
#else
typedef dma_descriptor_align4_t parlio_dma_desc_t;
#endif

#ifdef CACHE_LL_L2MEM_NON_CACHE_ADDR
/* The descriptor address can be mapped by a fixed offset */
#define PARLIO_GET_NON_CACHED_DESC_ADDR(desc)   (desc ? (parlio_dma_desc_t *)(CACHE_LL_L2MEM_NON_CACHE_ADDR(desc)) : NULL)
#else
#define PARLIO_GET_NON_CACHED_DESC_ADDR(desc)   (desc)
#endif // CACHE_LL_L2MEM_NON_CACHE_ADDR

#if SOC_GDMA_TRIG_PERIPH_PARLIO0_BUS == SOC_GDMA_BUS_AXI
#define PARLIO_DMA_DESC_ALIGNMENT   8
#define PARLIO_DMA_DESC_SIZE        8
#else
#define PARLIO_DMA_DESC_ALIGNMENT   4
#define PARLIO_DMA_DESC_SIZE        sizeof(parlio_dma_desc_t)
#endif

#if SOC_PERIPH_CLK_CTRL_SHARED
#define PARLIO_CLOCK_SRC_ATOMIC() PERIPH_RCC_ATOMIC()
#else
#define PARLIO_CLOCK_SRC_ATOMIC()
#endif

#if !SOC_RCC_IS_INDEPENDENT
// Reset and Clock Control registers are mixing with other peripherals, so we need to use a critical section
#define PARLIO_RCC_ATOMIC() PERIPH_RCC_ATOMIC()
#else
#define PARLIO_RCC_ATOMIC()
#endif  // SOC_RCC_IS_INDEPENDENT

#define PARLIO_PM_LOCK_NAME_LEN_MAX 16

#ifdef __cplusplus
extern "C" {
#endif

enum {
    PARLIO_TX_QUEUE_READY,
    PARLIO_TX_QUEUE_PROGRESS,
    PARLIO_TX_QUEUE_COMPLETE,
    PARLIO_TX_QUEUE_MAX,
};

typedef enum {
    PARLIO_TX_FSM_INIT_WAIT,
    PARLIO_TX_FSM_INIT,
    PARLIO_TX_FSM_ENABLE_WAIT,
    PARLIO_TX_FSM_ENABLE,
    PARLIO_TX_FSM_RUN_WAIT,
    PARLIO_TX_FSM_RUN,
} parlio_tx_fsm_t;

typedef struct parlio_group_t {
    int group_id;             // group ID, index from 0
    portMUX_TYPE spinlock;    // to protect per-group register level concurrent access
    parlio_hal_context_t hal; // hal layer for each group
    parlio_tx_unit_handle_t tx_units[SOC_PARLIO_TX_UNITS_PER_GROUP]; // tx unit handles
} parlio_group_t;

parlio_group_t *parlio_acquire_group_handle(int group_id);

void parlio_release_group_handle(parlio_group_t *group);

#ifdef __cplusplus
}
#endif