/* * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #include #include #include #include #include // For MIN/MAX(a, b) #include #include #include #include #include #include "soc/io_mux_reg.h" #include "sdkconfig.h" #include "esp_attr.h" #include "esp_cpu.h" #include "spi_flash_mmap.h" #include "esp_log.h" #include "esp_private/system_internal.h" #include "esp_private/spi_flash_os.h" #include "esp_private/esp_clk.h" #if CONFIG_IDF_TARGET_ESP32 #include "esp32/rom/cache.h" #include "esp32/rom/spi_flash.h" #elif CONFIG_IDF_TARGET_ESP32S2 #include "esp32s2/rom/cache.h" #elif CONFIG_IDF_TARGET_ESP32S3 #include "soc/spi_mem_reg.h" #include "esp32s3/rom/opi_flash.h" #include "esp32s3/rom/cache.h" #include "esp32s3/opi_flash_private.h" #elif CONFIG_IDF_TARGET_ESP32C3 #include "esp32c3/rom/cache.h" #elif CONFIG_IDF_TARGET_ESP32H4 #include "esp32h4/rom/cache.h" #elif CONFIG_IDF_TARGET_ESP32C2 #include "esp32c2/rom/cache.h" #elif CONFIG_IDF_TARGET_ESP32C6 #include "esp32c6/rom/cache.h" #endif #include "esp_rom_spiflash.h" #include "esp_flash_partitions.h" #include "esp_private/cache_utils.h" #include "esp_flash.h" #include "esp_attr.h" #include "bootloader_flash.h" #include "bootloader_flash_config.h" #include "esp_compiler.h" #include "esp_rom_efuse.h" #if CONFIG_SPIRAM #include "esp_private/esp_psram_io.h" #endif /* bytes erased by SPIEraseBlock() ROM function */ #define BLOCK_ERASE_SIZE 65536 /* Limit number of bytes written/read in a single SPI operation, as these operations disable all higher priority tasks from running. */ #ifdef CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE #define MAX_WRITE_CHUNK CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE #else #define MAX_WRITE_CHUNK 8192 #endif // CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE #define MAX_READ_CHUNK 16384 static const char *TAG __attribute__((unused)) = "spi_flash"; #if CONFIG_SPI_FLASH_ENABLE_COUNTERS static spi_flash_counters_t s_flash_stats; #define COUNTER_START() uint32_t ts_begin = esp_cpu_get_cycle_count() #define COUNTER_STOP(counter) \ do{ \ s_flash_stats.counter.count++; \ s_flash_stats.counter.time += (esp_cpu_get_cycle_count() - ts_begin) / (esp_clk_cpu_freq() / 1000000); \ } while(0) #define COUNTER_ADD_BYTES(counter, size) \ do { \ s_flash_stats.counter.bytes += size; \ } while (0) #else #define COUNTER_START() #define COUNTER_STOP(counter) #define COUNTER_ADD_BYTES(counter, size) #endif //CONFIG_SPI_FLASH_ENABLE_COUNTERS const DRAM_ATTR spi_flash_guard_funcs_t g_flash_guard_default_ops = { .start = spi_flash_disable_interrupts_caches_and_other_cpu, .end = spi_flash_enable_interrupts_caches_and_other_cpu, }; const DRAM_ATTR spi_flash_guard_funcs_t g_flash_guard_no_os_ops = { .start = spi_flash_disable_interrupts_caches_and_other_cpu_no_os, .end = spi_flash_enable_interrupts_caches_no_os, }; static const spi_flash_guard_funcs_t *s_flash_guard_ops; void IRAM_ATTR spi_flash_guard_set(const spi_flash_guard_funcs_t *funcs) { s_flash_guard_ops = funcs; } const spi_flash_guard_funcs_t *IRAM_ATTR spi_flash_guard_get(void) { return s_flash_guard_ops; } #ifdef CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS #define UNSAFE_WRITE_ADDRESS abort() #else #define UNSAFE_WRITE_ADDRESS return false #endif static __attribute__((unused)) bool is_safe_write_address(size_t addr, size_t size) { if (!esp_partition_main_flash_region_safe(addr, size)) { UNSAFE_WRITE_ADDRESS; } return true; } #if CONFIG_SPI_FLASH_ROM_IMPL #include "esp_heap_caps.h" void IRAM_ATTR *spi_flash_malloc_internal(size_t size) { return heap_caps_malloc(size, MALLOC_CAP_8BIT|MALLOC_CAP_INTERNAL); } void IRAM_ATTR spi_flash_rom_impl_init(void) { spi_flash_guard_set(&g_flash_guard_default_ops); /* These two functions are in ROM only */ extern void spi_flash_mmap_os_func_set(void *(*func1)(size_t size), void (*func2)(void *p)); spi_flash_mmap_os_func_set(spi_flash_malloc_internal, heap_caps_free); extern esp_err_t spi_flash_mmap_page_num_init(uint32_t page_num); spi_flash_mmap_page_num_init(128); } #endif void IRAM_ATTR esp_mspi_pin_init(void) { #if SOC_SPI_MEM_SUPPORT_OPI_MODE bool octal_mspi_required = bootloader_flash_is_octal_mode_enabled(); #if CONFIG_SPIRAM_MODE_OCT octal_mspi_required |= true; #endif if (octal_mspi_required) { esp_rom_opiflash_pin_config(); extern void spi_timing_set_pin_drive_strength(void); spi_timing_set_pin_drive_strength(); } //Set F4R4 board pin drive strength. TODO: IDF-3663 #endif } esp_err_t IRAM_ATTR spi_flash_init_chip_state(void) { #if SOC_SPI_MEM_SUPPORT_OPI_MODE if (bootloader_flash_is_octal_mode_enabled()) { return esp_opiflash_init(rom_spiflash_legacy_data->chip.device_id); } else #endif { #if CONFIG_IDF_TARGET_ESP32S3 // Currently, only esp32s3 allows high performance mode. return spi_flash_enable_high_performance_mode(); #else return ESP_OK; #endif // CONFIG_IDF_TARGET_ESP32S3 } } #if CONFIG_SPI_FLASH_ENABLE_COUNTERS static inline void dump_counter(spi_flash_counter_t *counter, const char *name) { ESP_LOGI(TAG, "%s count=%8d time=%8dus bytes=%8d\n", name, counter->count, counter->time, counter->bytes); } const spi_flash_counters_t *spi_flash_get_counters(void) { return &s_flash_stats; } void spi_flash_reset_counters(void) { memset(&s_flash_stats, 0, sizeof(s_flash_stats)); } void spi_flash_dump_counters(void) { dump_counter(&s_flash_stats.read, "read "); dump_counter(&s_flash_stats.write, "write"); dump_counter(&s_flash_stats.erase, "erase"); } #endif //CONFIG_SPI_FLASH_ENABLE_COUNTERS void IRAM_ATTR spi_flash_set_rom_required_regs(void) { #if SOC_SPI_MEM_SUPPORT_OPI_MODE if (bootloader_flash_is_octal_mode_enabled()) { //Disable the variable dummy mode when doing timing tuning CLEAR_PERI_REG_MASK(SPI_MEM_DDR_REG(1), SPI_MEM_SPI_FMEM_VAR_DUMMY); /** * STR /DTR mode setting is done every time when `esp_rom_opiflash_exec_cmd` is called * * Add any registers that are not set in ROM SPI flash functions here in the future */ } #endif } #if CONFIG_SPIRAM_MODE_OCT // This function will only be called when Octal PSRAM enabled. void IRAM_ATTR spi_flash_set_vendor_required_regs(void) { if (bootloader_flash_is_octal_mode_enabled()) { esp_opiflash_set_required_regs(); SET_PERI_REG_BITS(SPI_MEM_CACHE_FCTRL_REG(1), SPI_MEM_CACHE_USR_CMD_4BYTE_V, 1, SPI_MEM_CACHE_USR_CMD_4BYTE_S); } else { //Flash chip requires MSPI specifically, call this function to set them // Set back MSPI registers after Octal PSRAM initialization. SET_PERI_REG_BITS(SPI_MEM_CACHE_FCTRL_REG(1), SPI_MEM_CACHE_USR_CMD_4BYTE_V, 0, SPI_MEM_CACHE_USR_CMD_4BYTE_S); } } #endif static const uint8_t s_mspi_io_num_default[] = { SPI_CLK_GPIO_NUM, SPI_Q_GPIO_NUM, SPI_D_GPIO_NUM, SPI_CS0_GPIO_NUM, SPI_HD_GPIO_NUM, SPI_WP_GPIO_NUM, #if SOC_SPI_MEM_SUPPORT_OPI_MODE SPI_DQS_GPIO_NUM, SPI_D4_GPIO_NUM, SPI_D5_GPIO_NUM, SPI_D6_GPIO_NUM, SPI_D7_GPIO_NUM #endif // SOC_SPI_MEM_SUPPORT_OPI_MODE }; uint8_t esp_mspi_get_io(esp_mspi_io_t io) { #if CONFIG_SPIRAM if (io == ESP_MSPI_IO_CS1) { return esp_psram_io_get_cs_io(); } #endif assert(io >= ESP_MSPI_IO_CLK); #if SOC_SPI_MEM_SUPPORT_OPI_MODE assert(io <= ESP_MSPI_IO_D7); #else assert(io <= ESP_MSPI_IO_WP); #endif #if SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE uint8_t mspi_io = 0; uint32_t spiconfig = 0; if (io == ESP_MSPI_IO_WP) { /** * wp pad is a bit special: * 1. since 32's efuse does not have enough bits for wp pad, so wp pad config put in flash bin header * 2. rom code take 0x3f as invalid wp pad num, but take 0 as other invalid mspi pads num */ #if CONFIG_IDF_TARGET_ESP32 return bootloader_flash_get_wp_pin(); #else spiconfig = esp_rom_efuse_get_flash_wp_gpio(); return (spiconfig == 0x3f) ? s_mspi_io_num_default[io] : spiconfig & 0x3f; #endif } #if SOC_SPI_MEM_SUPPORT_OPI_MODE spiconfig = (io < ESP_MSPI_IO_WP) ? esp_rom_efuse_get_flash_gpio_info() : esp_rom_efuse_get_opiconfig(); #else spiconfig = esp_rom_efuse_get_flash_gpio_info(); #endif // SOC_SPI_MEM_SUPPORT_OPI_MODE if (spiconfig == ESP_ROM_EFUSE_FLASH_DEFAULT_SPI) { mspi_io = s_mspi_io_num_default[io]; } else if (io < ESP_MSPI_IO_WP) { /** * [0 : 5] -- CLK * [6 :11] -- Q(D1) * [12:17] -- D(D0) * [18:23] -- CS * [24:29] -- HD(D3) */ mspi_io = (spiconfig >> io * 6) & 0x3f; } #if SOC_SPI_MEM_SUPPORT_OPI_MODE else { /** * [0 : 5] -- DQS * [6 :11] -- D4 * [12:17] -- D5 * [18:23] -- D6 * [24:29] -- D7 */ mspi_io = (spiconfig >> (io - ESP_MSPI_IO_DQS) * 6) & 0x3f; } #endif // SOC_SPI_MEM_SUPPORT_OPI_MODE return mspi_io; #else // SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE return s_mspi_io_num_default[io]; #endif // SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE }