// Copyright 2020 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #pragma once // AES-CBC hardware throughput (accounts for worst-case performance with PSRAM workaround) #define IDF_PERFORMANCE_MIN_AES_CBC_THROUGHPUT_MBSEC 8.2 // SHA256 hardware throughput at 240MHz, threshold set lower than worst case #define IDF_PERFORMANCE_MIN_SHA256_THROUGHPUT_MBSEC 8.0 // esp_sha() time to process 32KB of input data from RAM #define IDF_PERFORMANCE_MAX_TIME_SHA1_32KB 5000 #define IDF_PERFORMANCE_MAX_TIME_SHA512_32KB 4500 #define IDF_PERFORMANCE_MAX_RSA_2048KEY_PUBLIC_OP 19000 #define IDF_PERFORMANCE_MAX_RSA_2048KEY_PRIVATE_OP 190000 #define IDF_PERFORMANCE_MAX_RSA_3072KEY_PUBLIC_OP 33000 #define IDF_PERFORMANCE_MAX_RSA_3072KEY_PRIVATE_OP 360000 #define IDF_PERFORMANCE_MAX_RSA_4096KEY_PUBLIC_OP 90000 #define IDF_PERFORMANCE_MAX_RSA_4096KEY_PRIVATE_OP 870000 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING 30 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA 27 /* * Flash Performance value * 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2) * These thresholds are set to about 70% of the average test data, under certain condition. * Contact Espressif for details. */ #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B //The single_core config is much faster than other configs. Use the value of other configs //Collect data and correct it later #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B 0 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B //The single_core config is much faster than other configs. Use the value of other configs #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B 35300 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB (697*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB (6780*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE //erase performance is highly depending on the chip vendor. Use 70% of the minimal value. #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE 11200 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B //The single_core config is much faster than other configs. Use the value of other configs #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B 20100 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B //The single_core config is much faster than other configs. Use the value of other configs #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B 35200 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB (754*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB (6650*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE //erase performance is highly depending on the chip vendor. Use 70% of the minimal value. #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE 45300 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B //The single_core config is much faster than other configs. Use the value of other configs #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B 16200 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B //The single_core config is much faster than other configs. Use the value of other configs #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B 33600 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB (484*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB (1512*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE //erase performance is highly depending on the chip vendor. Use 70% of the minimal value. #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE 49600 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B 73500 #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B (261*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB (470*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB (261*1000) #endif #ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE //erase performance is highly depending on the chip vendor. Use 70% of the minimal value. #define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE 30900 #endif // floating point instructions per divide and per sqrt (configured for worst-case with PSRAM workaround) #define IDF_PERFORMANCE_MAX_CYCLES_PER_DIV 70 #define IDF_PERFORMANCE_MAX_CYCLES_PER_SQRT 140