/* * SPDX-FileCopyrightText: 2010-2023 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ // Internal header, don't use it in the user code #pragma once #include #include "driver/spi_common.h" #include "freertos/FreeRTOS.h" #include "hal/spi_types.h" #include "hal/dma_types.h" #include "esp_pm.h" #if SOC_GDMA_SUPPORTED #include "esp_private/gdma.h" #endif #ifdef __cplusplus extern "C" { #endif #ifdef CONFIG_SPI_MASTER_ISR_IN_IRAM #define SPI_MASTER_ISR_ATTR IRAM_ATTR #else #define SPI_MASTER_ISR_ATTR #endif #ifdef CONFIG_SPI_MASTER_IN_IRAM #define SPI_MASTER_ATTR IRAM_ATTR #else #define SPI_MASTER_ATTR #endif #define BUS_LOCK_DEBUG 0 #if BUS_LOCK_DEBUG #define BUS_LOCK_DEBUG_EXECUTE_CHECK(x) assert(x) #else #define BUS_LOCK_DEBUG_EXECUTE_CHECK(x) #endif #if SOC_GPSPI_SUPPORTED && (SOC_GDMA_TRIG_PERIPH_SPI2_BUS == SOC_GDMA_BUS_AXI) #define DMA_DESC_MEM_ALIGN_SIZE 8 typedef dma_descriptor_align8_t spi_dma_desc_t; #else #define DMA_DESC_MEM_ALIGN_SIZE 4 typedef dma_descriptor_align4_t spi_dma_desc_t; #endif struct spi_bus_lock_t; struct spi_bus_lock_dev_t; /// Handle to the lock of an SPI bus typedef struct spi_bus_lock_t* spi_bus_lock_handle_t; /// Handle to lock of one of the device on an SPI bus typedef struct spi_bus_lock_dev_t* spi_bus_lock_dev_handle_t; /// Background operation control function typedef void (*bg_ctrl_func_t)(void*); /// Attributes of an SPI bus typedef struct { spi_bus_config_t bus_cfg; ///< Config used to initialize the bus uint32_t flags; ///< Flags (attributes) of the bus int max_transfer_sz; ///< Maximum length of bytes available to send bool dma_enabled; ///< To enable DMA or not uint16_t internal_mem_align_size; ///< Buffer align byte requirement for internal memory int tx_dma_chan; ///< TX DMA channel, on ESP32 and ESP32S2, tx_dma_chan and rx_dma_chan are same int rx_dma_chan; ///< RX DMA channel, on ESP32 and ESP32S2, tx_dma_chan and rx_dma_chan are same int dma_desc_num; ///< DMA descriptor number of dmadesc_tx or dmadesc_rx. spi_dma_desc_t *dmadesc_tx; ///< DMA descriptor array for TX spi_dma_desc_t *dmadesc_rx; ///< DMA descriptor array for RX spi_bus_lock_handle_t lock; #ifdef CONFIG_PM_ENABLE esp_pm_lock_handle_t pm_lock; ///< Power management lock #endif } spi_bus_attr_t; /// Destructor called when a bus is deinitialized. typedef esp_err_t (*spi_destroy_func_t)(void*); /** * @brief Try to claim a SPI peripheral * * Call this if your driver wants to manage a SPI peripheral. * * @param host Peripheral to claim * @param source The caller indentification string. * * @return True if peripheral is claimed successfully; false if peripheral already is claimed. */ bool spicommon_periph_claim(spi_host_device_t host, const char* source); /** * @brief Check whether the spi periph is in use. * * @param host Peripheral to check. * * @return True if in use, otherwise false. */ bool spicommon_periph_in_use(spi_host_device_t host); /** * @brief Return the SPI peripheral so another driver can claim it. * * @param host Peripheral to return * * @return True if peripheral is returned successfully; false if peripheral was free to claim already. */ bool spicommon_periph_free(spi_host_device_t host); /** * @brief Alloc DMA for SPI * * @param host_id SPI host ID * @param dma_chan DMA channel to be used * @param[out] out_actual_tx_dma_chan Actual TX DMA channel (if you choose to assign a specific DMA channel, this will be the channel you assigned before) * @param[out] out_actual_rx_dma_chan Actual RX DMA channel (if you choose to assign a specific DMA channel, this will be the channel you assigned before) * * @return * - ESP_OK: On success * - ESP_ERR_NO_MEM: No enough memory * - ESP_ERR_NOT_FOUND: There is no available DMA channel */ esp_err_t spicommon_dma_chan_alloc(spi_host_device_t host_id, spi_dma_chan_t dma_chan, uint32_t *out_actual_tx_dma_chan, uint32_t *out_actual_rx_dma_chan); /** * @brief Free DMA for SPI * * @param host_id SPI host ID * * @return * - ESP_OK: On success */ esp_err_t spicommon_dma_chan_free(spi_host_device_t host_id); #if SOC_GDMA_SUPPORTED /** * @brief Get SPI GDMA Handle for GMDA Supported Chip * * @param host_id SPI host ID * @param gdma_handle GDMA Handle to Return * @param gdma_direction GDMA Channel Direction in Enum * - GDMA_CHANNEL_DIRECTION_TX * - GDMA_CHANNEL_DIRECTION_RX * * @return * - ESP_OK: On success */ esp_err_t spicommon_gdma_get_handle(spi_host_device_t host_id, gdma_channel_handle_t *gdma_handle, gdma_channel_direction_t gdma_direction); #endif /** * @brief Connect a SPI peripheral to GPIO pins * * This routine is used to connect a SPI peripheral to the IO-pads and DMA channel given in * the arguments. Depending on the IO-pads requested, the routing is done either using the * IO_mux or using the GPIO matrix. * * @param host SPI peripheral to be routed * @param bus_config Pointer to a spi_bus_config struct detailing the GPIO pins * @param flags Combination of SPICOMMON_BUSFLAG_* flags, set to ensure the pins set are capable with some functions: * - ``SPICOMMON_BUSFLAG_MASTER``: Initialize I/O in master mode * - ``SPICOMMON_BUSFLAG_SLAVE``: Initialize I/O in slave mode * - ``SPICOMMON_BUSFLAG_IOMUX_PINS``: Pins set should match the iomux pins of the controller. * - ``SPICOMMON_BUSFLAG_SCLK``, ``SPICOMMON_BUSFLAG_MISO``, ``SPICOMMON_BUSFLAG_MOSI``: * Make sure SCLK/MISO/MOSI is/are set to a valid GPIO. Also check output capability according to the mode. * - ``SPICOMMON_BUSFLAG_DUAL``: Make sure both MISO and MOSI are output capable so that DIO mode is capable. * - ``SPICOMMON_BUSFLAG_WPHD`` Make sure WP and HD are set to valid output GPIOs. * - ``SPICOMMON_BUSFLAG_QUAD``: Combination of ``SPICOMMON_BUSFLAG_DUAL`` and ``SPICOMMON_BUSFLAG_WPHD``. * - ``SPICOMMON_BUSFLAG_IO4_IO7``: Make sure spi data4 ~ spi data7 are set to valid output GPIOs. * - ``SPICOMMON_BUSFLAG_OCTAL``: Combination of ``SPICOMMON_BUSFLAG_QUAL`` and ``SPICOMMON_BUSFLAG_IO4_IO7``. * @param[out] flags_o A SPICOMMON_BUSFLAG_* flag combination of bus abilities will be written to this address. * Leave to NULL if not needed. * - ``SPICOMMON_BUSFLAG_IOMUX_PINS``: The bus is connected to iomux pins. * - ``SPICOMMON_BUSFLAG_SCLK``, ``SPICOMMON_BUSFLAG_MISO``, ``SPICOMMON_BUSFLAG_MOSI``: The bus has * CLK/MISO/MOSI connected. * - ``SPICOMMON_BUSFLAG_DUAL``: The bus is capable with DIO mode. * - ``SPICOMMON_BUSFLAG_WPHD`` The bus has WP and HD connected. * - ``SPICOMMON_BUSFLAG_QUAD``: Combination of ``SPICOMMON_BUSFLAG_DUAL`` and ``SPICOMMON_BUSFLAG_WPHD``. * - ``SPICOMMON_BUSFLAG_IO4_IO7``: The bus has spi data4 ~ spi data7 connected. * - ``SPICOMMON_BUSFLAG_OCTAL``: Combination of ``SPICOMMON_BUSFLAG_QUAL`` and ``SPICOMMON_BUSFLAG_IO4_IO7``. * @return * - ESP_ERR_INVALID_ARG if parameter is invalid * - ESP_OK on success */ esp_err_t spicommon_bus_initialize_io(spi_host_device_t host, const spi_bus_config_t *bus_config, uint32_t flags, uint32_t *flags_o); /** * @brief Free the IO used by a SPI peripheral * * @param bus_cfg Bus config struct which defines which pins to be used. * * @return * - ESP_ERR_INVALID_ARG if parameter is invalid * - ESP_OK on success */ esp_err_t spicommon_bus_free_io_cfg(const spi_bus_config_t *bus_cfg); /** * @brief Initialize a Chip Select pin for a specific SPI peripheral * * @param host SPI peripheral * @param cs_io_num GPIO pin to route * @param cs_num CS id to route * @param force_gpio_matrix If true, CS will always be routed through the GPIO matrix. If false, * if the GPIO number allows it, the routing will happen through the IO_mux. */ void spicommon_cs_initialize(spi_host_device_t host, int cs_io_num, int cs_num, int force_gpio_matrix); /** * @brief Free a chip select line * * @param cs_gpio_num CS gpio num to free */ void spicommon_cs_free_io(int cs_gpio_num); /** * @brief Check whether all pins used by a host are through IOMUX. * * @param host SPI peripheral * * @return false if any pins are through the GPIO matrix, otherwise true. */ bool spicommon_bus_using_iomux(spi_host_device_t host); /** * @brief Get the IRQ source for a specific SPI host * * @param host The SPI host * * @return The hosts IRQ source */ int spicommon_irqsource_for_host(spi_host_device_t host); /** * @brief Get the IRQ source for a specific SPI DMA * * @param host The SPI host * * @return The hosts IRQ source */ int spicommon_irqdma_source_for_host(spi_host_device_t host); /** * Callback, to be called when a DMA engine reset is completed */ typedef void(*dmaworkaround_cb_t)(void *arg); #if CONFIG_IDF_TARGET_ESP32 //This workaround is only for esp32 /** * @brief Request a reset for a certain DMA channel * * @note In some (well-defined) cases in the ESP32 (at least rev v.0 and v.1), a SPI DMA channel will get confused. This can be remedied * by resetting the SPI DMA hardware in case this happens. Unfortunately, the reset knob used for thsi will reset _both_ DMA channels, and * as such can only done safely when both DMA channels are idle. These functions coordinate this. * * Essentially, when a reset is needed, a driver can request this using spicommon_dmaworkaround_req_reset. This is supposed to be called * with an user-supplied function as an argument. If both DMA channels are idle, this call will reset the DMA subsystem and return true. * If the other DMA channel is still busy, it will return false; as soon as the other DMA channel is done, however, it will reset the * DMA subsystem and call the callback. The callback is then supposed to be used to continue the SPI drivers activity. * * @param dmachan DMA channel associated with the SPI host that needs a reset * @param cb Callback to call in case DMA channel cannot be reset immediately * @param arg Argument to the callback * * @return True when a DMA reset could be executed immediately. False when it could not; in this * case the callback will be called with the specified argument when the logic can execute * a reset, after that reset. */ bool spicommon_dmaworkaround_req_reset(int dmachan, dmaworkaround_cb_t cb, void *arg); /** * @brief Check if a DMA reset is requested but has not completed yet * * @return True when a DMA reset is requested but hasn't completed yet. False otherwise. */ bool spicommon_dmaworkaround_reset_in_progress(void); /** * @brief Mark a DMA channel as idle. * * A call to this function tells the workaround logic that this channel will * not be affected by a global SPI DMA reset. */ void spicommon_dmaworkaround_idle(int dmachan); /** * @brief Mark a DMA channel as active. * * A call to this function tells the workaround logic that this channel will * be affected by a global SPI DMA reset, and a reset like that should not be attempted. */ void spicommon_dmaworkaround_transfer_active(int dmachan); #endif //#if CONFIG_IDF_TARGET_ESP32 /******************************************************************************* * Bus attributes ******************************************************************************/ /** * @brief Set bus lock for the main bus, called by startup code. * * @param lock The lock to be used by the main SPI bus. */ void spi_bus_main_set_lock(spi_bus_lock_handle_t lock); /** * @brief Get the attributes of a specified SPI bus. * * @param host_id The specified host to get attribute * @return (Const) Pointer to the attributes */ const spi_bus_attr_t* spi_bus_get_attr(spi_host_device_t host_id); /** * @brief Register a function to a initialized bus to make it called when deinitializing the bus. * * @param host_id The SPI bus to register the destructor. * @param f Destructor to register * @param arg The argument to call the destructor * @return Always ESP_OK. */ esp_err_t spi_bus_register_destroy_func(spi_host_device_t host_id, spi_destroy_func_t f, void *arg); /******************************************************************************* * SPI Bus Lock for arbitration among SPI master (intr, polling) trans, SPI flash operations and * flash/psram cache access. * * NON-PUBLIC API. Don't use it directly in applications. * * There is the main lock corresponding to an SPI bus, of which several devices (holding child * locks) attaching to it. Each of the device is STRONGLY RECOMMENDED to be used in only one task * to avoid concurrency issues. * * Terms: * - BG operations (BackGround operations) means some transaction that will not immediately / * explicitly be sent in the task. It can be some cache access, or interrupt transactions. * * - Operation: usage of the bus, for example, do SPI transactions. * * - Acquiring processor: the task or the ISR that is allowed to use the bus. No operations will be * performed if there is no acquiring processor. A processor becomes the acquiring processor if * it ask for that when no acquiring processor exist, otherwise it has to wait for the acquiring * processor to handle over the role to it. The acquiring processor will and will only assign one * acquiring processor in the waiting list (if not empty) when it finishes its operation. * * - Acquiring device: the only device allowed to use the bus. Operations can be performed in * either the BG or the task. When there's no acquiring device, only the ISR is allowed to be the * acquiring processor and perform operations on the bus. * * When a device wants to perform operations, it either: * 1. Acquire the bus, and operate in the task (e.g. polling transactions of SPI master, and SPI flash * operations) * * 2. Request a BG operation. And the ISR will be enabled at proper time. * * For example if a task wants to send an interrupt transaction, it prepares the data in the task, * call `spi_bus_lock_bg_request`, and handle sending in the ISR. * * 3. When a device has already acquired the bus, BG operations are also allowed. After the * `spi_bus_lock_bg_request` is called, call `spi_bus_lock_wait_bg_done` before operations in task * again to wait until BG operations are done. * * Any device may try to invoke the ISR (by `spi_bus_lock_bg_request`). The ISR will be invoked and * become the acquiring processor immediately when the bus is not acquired by other processors. Any * device may also try to acquire the bus (by `spi_bus_lock_acquire_start`). The device will become * the acquiring processor immediately when the bus is not acquired and there is no request active. * * The acquiring processor must be aware of its acquiring role, and properly transfer the acquiring * processor to other tasks or ISR when they have nothing else to do. Before picking a new * acquiring processor, a new acquiring device must be picked first, if there are other devices, * asking to be acquiring device. After that, the new acquiring processor is picked by the sequence * below: * * 1. If there is an acquiring device: * 1.1 The ISR, if acquiring device has active BG requests * 1.2 The task of the device, if no active BG request for the device * 2. The ISR, if there's no acquiring device, but any BG request is active * 3. No one becomes the acquiring processor * * The API also helps on the arbitration of SPI cs lines. The bus is initialized with a cs_num * argument. When attaching devices onto the bus with `spi_bus_lock_register_dev`, it will allocate * devices with different device ID according to the flags given. If the ID is smaller than the * cs_num given when bus is initialized, error will be returned. * * Usage: * * Initialization: * 1. Call `spi_bus_init_lock` to register a lock for a bus. * 2. Call `spi_bus_lock_set_bg_control` to prepare BG enable/disable functions for * the lock. * 3. Call `spi_bus_lock_register_dev` for each devices that may make use of the * bus, properly store the returned handle, representing those devices. * * * Acquiring: * 1. Call `spi_bus_lock_acquire_start` when a device wants to use the bus * 2. Call `spi_bus_lock_touch` to mark the bus as touched by this device. Also check if the bus * has been touched by other devices. * 3. (optional) Do something on the bus... * 4. (optional) Call `spi_bus_lock_bg_request` to inform and invoke the BG. See ISR below about * ISR operations. * 5. (optional) If `spi_bus_lock_bg_request` is done, you have to call `spi_bus_lock_wait_bg_done` * before touching the bus again, or do the following steps. * 6. Call `spi_bus_lock_acquire_end` to release the bus to other devices. * * * ISR: * 1. Call `spi_bus_lock_bg_entry` when entering the ISR, run or skip the closure for the previous * operation according to the return value. * 2. Call `spi_bus_lock_get_acquiring_dev` to get the acquiring device. If there is no acquiring * device, call `spi_bus_lock_bg_check_dev_acq` to check and update a new acquiring device. * 3. Call `spi_bus_lock_bg_check_dev_req` to check for request of the desired device. If the * desired device is not requested, go to step 5. * 4. Check, start operation for the desired device and go to step 6; otherwise if no operations * can be performed, call `spi_bus_lock_bg_clear_req` to clear the request for this device. If * `spi_bus_lock_bg_clear_req` is called and there is no BG requests active, goto step 6. * 5. (optional) If the device is the acquiring device, go to step 6, otherwise * find another desired device, and go back to step 3. * 6. Call `spi_bus_lock_bg_exit` to try quitting the ISR. If failed, go back to step 2 to look for * a new request again. Otherwise, quit the ISR. * * * Deinitialization (optional): * 1. Call `spi_bus_lock_unregister_dev` for each device when they are no longer needed. * 2. Call `spi_bus_deinit_lock` to release the resources occupied by the lock. * * Some technical details: * * The child-lock of each device will have its own Binary Semaphore, which allows the task serving * this device (task A) being blocked when it fail to become the acquiring processor while it's * calling `spi_bus_lock_acquire_start` or `spi_bus_lock_wait_bg_done`. If it is blocked, there * must be an acquiring processor (either the ISR or another task (task B)), is doing transaction * on the bus. After that, task A will get unblocked and become the acquiring processor when the * ISR call `spi_bus_lock_bg_resume_acquired_dev`, or task B call `spi_bus_lock_acquire_end`. * * When the device wants to send ISR transaction, it should call `spi_bus_lock_bg_request` after * the data is prepared. This function sets a request bit in the critical resource. The ISR will be * invoked and become the new acquiring processor, when: * * 1. A task calls `spi_bus_lock_bg_request` while there is no acquiring processor; * 2. A tasks calls `spi_bus_lock_bg_request` while the task is the acquiring processor. Then the * acquiring processor is handled over to the ISR; * 3. A tasks who is the acquiring processor release the bus by calling `spi_bus_lock_acquire_end`, * and the ISR happens to be the next acquiring processor. * * The ISR will check (by `spi_bus_lock_bg_check_dev_req`) and clear a request bit (by * `spi_bus_lock_bg_clear_req`) after it confirm that all the requests of the corresponding device * are served. The request bit supports being written to recursively, which means, the task don't * need to wait for `spi_bus_lock_bg_clear_req` before call another `spi_bus_lock_bg_request`. The * API will handle the concurrency conflicts properly. * * The `spi_bus_lock_bg_exit` (together with `spi_bus_lock_bg_entry` called before)` is responsible * to ensure ONE and ONLY ONE of the following will happen when the ISR try to give up its * acquiring processor rule: * * 1. ISR quit, no any task unblocked while the interrupt disabled, and none of the BG bits is * active. * 2. ISR quit, there is an acquiring device, and the acquiring processor is passed to the task * serving the acquiring device by unblocking the task. * 3. The ISR failed to quit and have to try again. ******************************************************************************/ #define DEV_NUM_MAX 6 ///< Number of devices supported by this lock /// Lock configuration struct typedef struct { int host_id; ///< SPI host id int cs_num; ///< Physical cs numbers of the host } spi_bus_lock_config_t; /// Child-lock configuration struct typedef struct { uint32_t flags; ///< flags for the lock, OR-ed of `SPI_BUS_LOCK_DEV_*` flags. #define SPI_BUS_LOCK_DEV_FLAG_CS_REQUIRED BIT(0) ///< The device needs a physical CS pin. } spi_bus_lock_dev_config_t; /************* Common *********************/ /** * Initialize a lock for an SPI bus. * * @param out_lock Output of the handle to the lock * @return * - ESP_ERR_NO_MEM: if memory exhausted * - ESP_OK: if success */ esp_err_t spi_bus_init_lock(spi_bus_lock_handle_t *out_lock, const spi_bus_lock_config_t *config); /** * Free the resources used by an SPI bus lock. * * @note All attached devices should have been unregistered before calling this * funciton. * * @param lock Handle to the lock to free. */ void spi_bus_deinit_lock(spi_bus_lock_handle_t lock); /** * @brief Get the corresponding lock according to bus id. * * @param host_id The bus id to get the lock * @return The lock handle */ spi_bus_lock_handle_t spi_bus_lock_get_by_id(spi_host_device_t host_id); /** * @brief Configure how the SPI bus lock enable the background operation. * * @note The lock will not try to stop the background operations, but wait for * The background operations finished indicated by `spi_bus_lock_bg_resume_acquired_dev`. * * @param lock Handle to the lock to set * @param bg_enable The enabling function * @param bg_disable The disabling function, set to NULL if not required * @param arg Argument to pass to the enabling/disabling function. */ void spi_bus_lock_set_bg_control(spi_bus_lock_handle_t lock, bg_ctrl_func_t bg_enable, bg_ctrl_func_t bg_disable, void *arg); /** * Attach a device onto an SPI bus lock. The returning handle is used to perform * following requests for the attached device. * * @param lock SPI bus lock to attach * @param out_dev_handle Output handle corresponding to the device * @param flags requirement of the device, bitwise OR of SPI_BUS_LOCK_FLAG_* flags * * @return * - ESP_ERR_NOT_SUPPORTED: if there's no hardware resources for new devices. * - ESP_ERR_NO_MEM: if memory exhausted * - ESP_OK: if success */ esp_err_t spi_bus_lock_register_dev(spi_bus_lock_handle_t lock, spi_bus_lock_dev_config_t *config, spi_bus_lock_dev_handle_t *out_dev_handle); /** * Detach a device from its bus and free the resources used * * @param dev_handle Handle to the device. */ void spi_bus_lock_unregister_dev(spi_bus_lock_dev_handle_t dev_handle); /** * @brief Get the parent bus lock of the device * * @param dev_handle Handle to the device to get bus lock * @return The bus lock handle */ spi_bus_lock_handle_t spi_bus_lock_get_parent(spi_bus_lock_dev_handle_t dev_handle); /** * @brief Get the device ID of a lock. * * The callers should allocate CS pins according to this ID. * * @param dev_handle Handle to the device to get ID * @return ID of the device */ int spi_bus_lock_get_dev_id(spi_bus_lock_dev_handle_t dev_handle); /** * @brief The device request to touch bus registers. Can only be called by the acquiring processor. * * Also check if the registers has been touched by other devices. * * @param dev_handle Handle to the device to operate the registers * @return true if there has been other devices touching SPI registers. * The caller may need to do a full-configuration. Otherwise return * false. */ bool spi_bus_lock_touch(spi_bus_lock_dev_handle_t dev_handle); /************* Acquiring service *********************/ /** * Acquiring the SPI bus for exclusive use. Will also wait for the BG to finish all requests of * this device before it returns. * * After successfully return, the caller becomes the acquiring processor. * * @note For the main flash bus, `bg_disable` will be called to disable the cache. * * @param dev_handle Handle to the device request for acquiring. * @param wait Time to wait until timeout or succeed, must be `portMAX_DELAY` for now. * @return * - ESP_OK: on success * - ESP_ERR_INVALID_ARG: timeout is not portMAX_DELAY */ esp_err_t spi_bus_lock_acquire_start(spi_bus_lock_dev_handle_t dev_handle, TickType_t wait); /** * Release the bus acquired. Will pass the acquiring processor to other blocked * processors (tasks or ISR), and cause them to be unblocked or invoked. * * The acquiring device may also become NULL if no device is asking for acquiring. * In this case, the BG may be invoked if there is any BG requests. * * If the new acquiring device has BG requests, the BG will be invoked before the * task is resumed later after the BG finishes all requests of the new acquiring * device. Otherwise the task of the new acquiring device will be resumed immediately. * * @param dev_handle Handle to the device releasing the bus. * @return * - ESP_OK: on success * - ESP_ERR_INVALID_STATE: the device hasn't acquired the lock yet */ esp_err_t spi_bus_lock_acquire_end(spi_bus_lock_dev_handle_t dev_handle); /** * Get the device acquiring the bus. * * @note Return value is not stable as the acquiring processor may change * when this function is called. * * @param lock Lock of SPI bus to get the acquiring device. * @return The argument corresponding to the acquiring device, see * `spi_bus_lock_register_dev`. */ spi_bus_lock_dev_handle_t spi_bus_lock_get_acquiring_dev(spi_bus_lock_handle_t lock); /************* BG (Background, for ISR or cache) service *********************/ /** * Call by a device to request a BG operation. * * Depending on the bus lock state, the BG operations may be resumed by this * call, or pending until BG operations allowed. * * Cleared by `spi_bus_lock_bg_clear_req` in the BG. * * @param dev_handle The device requesting BG operations. * @return always ESP_OK */ esp_err_t spi_bus_lock_bg_request(spi_bus_lock_dev_handle_t dev_handle); /** * Wait until the ISR has finished all the BG operations for the acquiring device. * If any `spi_bus_lock_bg_request` for this device has been called after * `spi_bus_lock_acquire_start`, this function must be called before any operation * in the task. * * @note Can only be called when bus acquired by this device. * * @param dev_handle Handle to the device acquiring the bus. * @param wait Time to wait until timeout or succeed, must be `portMAX_DELAY` for now. * @return * - ESP_OK: on success * - ESP_ERR_INVALID_STATE: The device is not the acquiring bus. * - ESP_ERR_INVALID_ARG: Timeout is not portMAX_DELAY. */ esp_err_t spi_bus_lock_wait_bg_done(spi_bus_lock_dev_handle_t dev_handle, TickType_t wait); /** * Handle interrupt and closure of last operation. Should be called at the beginning of the ISR, * when the ISR is acting as the acquiring processor. * * @param lock The SPI bus lock * * @return false if the ISR has already touched the HW, should run closure of the * last operation first; otherwise true if the ISR just start operating * on the HW, closure should be skipped. */ bool spi_bus_lock_bg_entry(spi_bus_lock_handle_t lock); /** * Handle the scheduling of other acquiring devices, and control of HW operation * status. * * If no BG request is found, call with `wip=false`. This function will return false, * indicating there is incoming BG requests for the current acquiring device (or * for all devices if there is no acquiring device) and the ISR needs retry. * Otherwise may schedule a new acquiring processor (unblock the task) if there * is, and return true. * * Otherwise if a BG request is started in this ISR, call with `wip=true` and the * function will enable the interrupt to make the ISR be called again when the * request is done. * * This function is safe and should still be called when the ISR just lost its acquiring processor * role, but hasn't quit. * * @note This function will not change acquiring device. The ISR call * `spi_bus_lock_bg_update_acquiring` to check for new acquiring device, * when acquiring devices need to be served before other devices. * * @param lock The SPI bus lock. * @param wip Whether an operation is being executed when quitting the ISR. * @param do_yield[out] Not touched when no yielding required, otherwise set * to pdTRUE. * @return false if retry is required, indicating that there is pending BG request. * otherwise true and quit ISR is allowed. */ bool spi_bus_lock_bg_exit(spi_bus_lock_handle_t lock, bool wip, BaseType_t* do_yield); /** * Check whether there is device asking for the acquiring device, and the desired * device for the next operation is also recommended. * * @note Must be called when the ISR is acting as the acquiring processor, and * there is no acquiring device. * * @param lock The SPI bus lock. * @param out_dev_lock The recommended device for hte next operation. It's the new * acquiring device when found, otherwise a device that has active BG request. * * @return true if the ISR need to quit (new acquiring device has no active BG * request, or no active BG requests for all devices when there is no * acquiring device), otherwise false. */ bool spi_bus_lock_bg_check_dev_acq(spi_bus_lock_handle_t lock, spi_bus_lock_dev_handle_t *out_dev_lock); /** * Check if the device has BG requests. Must be called when the ISR is acting as * the acquiring processor. * * @note This is not stable, may become true again when a task request for BG * operation (by `spi_bus_lock_bg_request`). * * @param dev_lock The device to check. * @return true if the device has BG requests, otherwise false. */ bool spi_bus_lock_bg_check_dev_req(spi_bus_lock_dev_handle_t dev_lock); /** * Clear the pending BG operation request of a device after served. Must be * called when the ISR is acting as the acquiring processor. * * @note When the return value is true, the ISR will lost the acquiring processor role. Then * `spi_bus_lock_bg_exit` must be called and checked before calling all other functions that * require to be called when the ISR is the acquiring processor again. * * @param dev_handle The device whose request is served. * @return True if no pending requests for the acquiring device, or for all devices * if there is no acquiring device. Otherwise false. When the return value is * true, the ISR is no longer the acquiring processor. */ bool spi_bus_lock_bg_clear_req(spi_bus_lock_dev_handle_t dev_lock); /** * Check if there is any active BG requests. * * @param lock The SPI bus lock. * @return true if any device has active BG requst, otherwise false. */ bool spi_bus_lock_bg_req_exist(spi_bus_lock_handle_t lock); /******************************************************************************* * Variable and APIs for the OS to initialize the locks for the main chip ******************************************************************************/ /// The lock for the main bus extern const spi_bus_lock_handle_t g_main_spi_bus_lock; /** * @brief Initialize the main SPI bus, called during chip startup. * * @return always ESP_OK */ esp_err_t spi_bus_lock_init_main_bus(void); /// The lock for the main flash device extern const spi_bus_lock_dev_handle_t g_spi_lock_main_flash_dev; /** * @brief Initialize the main flash device, called during chip startup. * * @return * - ESP_OK: if success * - ESP_ERR_NO_MEM: memory exhausted */ esp_err_t spi_bus_lock_init_main_dev(void); #ifdef __cplusplus } #endif