/** * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #pragma once #include #include "soc/soc.h" #ifdef __cplusplus extern "C" { #endif /** GPIO_BT_SELECT_REG register * GPIO bit select register */ #define GPIO_BT_SELECT_REG (DR_REG_GPIO_BASE + 0x0) /** GPIO_BT_SEL : R/W; bitpos: [31:0]; default: 0; * GPIO bit select register */ #define GPIO_BT_SEL 0xFFFFFFFFU #define GPIO_BT_SEL_M (GPIO_BT_SEL_V << GPIO_BT_SEL_S) #define GPIO_BT_SEL_V 0xFFFFFFFFU #define GPIO_BT_SEL_S 0 /** GPIO_OUT_REG register * GPIO output register */ #define GPIO_OUT_REG (DR_REG_GPIO_BASE + 0x4) /** GPIO_OUT_DATA_ORIG : R/W/SS; bitpos: [24:0]; default: 0; * GPIO output register for GPIO0-24 */ #define GPIO_OUT_DATA_ORIG 0x01FFFFFFU #define GPIO_OUT_DATA_ORIG_M (GPIO_OUT_DATA_ORIG_V << GPIO_OUT_DATA_ORIG_S) #define GPIO_OUT_DATA_ORIG_V 0x01FFFFFFU #define GPIO_OUT_DATA_ORIG_S 0 /** GPIO_OUT_W1TS_REG register * GPIO output set register */ #define GPIO_OUT_W1TS_REG (DR_REG_GPIO_BASE + 0x8) /** GPIO_OUT_W1TS : WT; bitpos: [24:0]; default: 0; * GPIO output set register for GPIO0-24 */ #define GPIO_OUT_W1TS 0x01FFFFFFU #define GPIO_OUT_W1TS_M (GPIO_OUT_W1TS_V << GPIO_OUT_W1TS_S) #define GPIO_OUT_W1TS_V 0x01FFFFFFU #define GPIO_OUT_W1TS_S 0 /** GPIO_OUT_W1TC_REG register * GPIO output clear register */ #define GPIO_OUT_W1TC_REG (DR_REG_GPIO_BASE + 0xc) /** GPIO_OUT_W1TC : WT; bitpos: [24:0]; default: 0; * GPIO output clear register for GPIO0-24 */ #define GPIO_OUT_W1TC 0x01FFFFFFU #define GPIO_OUT_W1TC_M (GPIO_OUT_W1TC_V << GPIO_OUT_W1TC_S) #define GPIO_OUT_W1TC_V 0x01FFFFFFU #define GPIO_OUT_W1TC_S 0 /** GPIO_SDIO_SELECT_REG register * GPIO sdio select register */ #define GPIO_SDIO_SELECT_REG (DR_REG_GPIO_BASE + 0x1c) /** GPIO_SDIO_SEL : R/W; bitpos: [7:0]; default: 0; * GPIO sdio select register */ #define GPIO_SDIO_SEL 0x000000FFU #define GPIO_SDIO_SEL_M (GPIO_SDIO_SEL_V << GPIO_SDIO_SEL_S) #define GPIO_SDIO_SEL_V 0x000000FFU #define GPIO_SDIO_SEL_S 0 /** GPIO_ENABLE_REG register * GPIO output enable register */ #define GPIO_ENABLE_REG (DR_REG_GPIO_BASE + 0x20) /** GPIO_ENABLE_DATA : R/W/SS; bitpos: [24:0]; default: 0; * GPIO output enable register for GPIO0-24 */ #define GPIO_ENABLE_DATA 0x01FFFFFFU #define GPIO_ENABLE_DATA_M (GPIO_ENABLE_DATA_V << GPIO_ENABLE_DATA_S) #define GPIO_ENABLE_DATA_V 0x01FFFFFFU #define GPIO_ENABLE_DATA_S 0 /** GPIO_ENABLE_W1TS_REG register * GPIO output enable set register */ #define GPIO_ENABLE_W1TS_REG (DR_REG_GPIO_BASE + 0x24) /** GPIO_ENABLE_W1TS : WT; bitpos: [24:0]; default: 0; * GPIO output enable set register for GPIO0-24 */ #define GPIO_ENABLE_W1TS 0x01FFFFFFU #define GPIO_ENABLE_W1TS_M (GPIO_ENABLE_W1TS_V << GPIO_ENABLE_W1TS_S) #define GPIO_ENABLE_W1TS_V 0x01FFFFFFU #define GPIO_ENABLE_W1TS_S 0 /** GPIO_ENABLE_W1TC_REG register * GPIO output enable clear register */ #define GPIO_ENABLE_W1TC_REG (DR_REG_GPIO_BASE + 0x28) /** GPIO_ENABLE_W1TC : WT; bitpos: [24:0]; default: 0; * GPIO output enable clear register for GPIO0-24 */ #define GPIO_ENABLE_W1TC 0x01FFFFFFU #define GPIO_ENABLE_W1TC_M (GPIO_ENABLE_W1TC_V << GPIO_ENABLE_W1TC_S) #define GPIO_ENABLE_W1TC_V 0x01FFFFFFU #define GPIO_ENABLE_W1TC_S 0 /** GPIO_STRAP_REG register * pad strapping register */ #define GPIO_STRAP_REG (DR_REG_GPIO_BASE + 0x38) /** GPIO_STRAPPING : RO; bitpos: [15:0]; default: 0; * pad strapping register */ #define GPIO_STRAPPING 0x0000FFFFU #define GPIO_STRAPPING_M (GPIO_STRAPPING_V << GPIO_STRAPPING_S) #define GPIO_STRAPPING_V 0x0000FFFFU #define GPIO_STRAPPING_S 0 /** GPIO_IN_REG register * GPIO input register */ #define GPIO_IN_REG (DR_REG_GPIO_BASE + 0x3c) /** GPIO_IN_DATA_NEXT : RO; bitpos: [24:0]; default: 0; * GPIO input register for GPIO0-24 */ #define GPIO_IN_DATA_NEXT 0x01FFFFFFU #define GPIO_IN_DATA_NEXT_M (GPIO_IN_DATA_NEXT_V << GPIO_IN_DATA_NEXT_S) #define GPIO_IN_DATA_NEXT_V 0x01FFFFFFU #define GPIO_IN_DATA_NEXT_S 0 /** GPIO_STATUS_REG register * GPIO interrupt status register */ #define GPIO_STATUS_REG (DR_REG_GPIO_BASE + 0x44) /** GPIO_STATUS_INTERRUPT : R/W/SS; bitpos: [24:0]; default: 0; * GPIO interrupt status register for GPIO0-24 */ #define GPIO_STATUS_INTERRUPT 0x01FFFFFFU #define GPIO_STATUS_INTERRUPT_M (GPIO_STATUS_INTERRUPT_V << GPIO_STATUS_INTERRUPT_S) #define GPIO_STATUS_INTERRUPT_V 0x01FFFFFFU #define GPIO_STATUS_INTERRUPT_S 0 /** GPIO_STATUS_W1TS_REG register * GPIO interrupt status set register */ #define GPIO_STATUS_W1TS_REG (DR_REG_GPIO_BASE + 0x48) /** GPIO_STATUS_W1TS : WT; bitpos: [24:0]; default: 0; * GPIO interrupt status set register for GPIO0-24 */ #define GPIO_STATUS_W1TS 0x01FFFFFFU #define GPIO_STATUS_W1TS_M (GPIO_STATUS_W1TS_V << GPIO_STATUS_W1TS_S) #define GPIO_STATUS_W1TS_V 0x01FFFFFFU #define GPIO_STATUS_W1TS_S 0 /** GPIO_STATUS_W1TC_REG register * GPIO interrupt status clear register */ #define GPIO_STATUS_W1TC_REG (DR_REG_GPIO_BASE + 0x4c) /** GPIO_STATUS_W1TC : WT; bitpos: [24:0]; default: 0; * GPIO interrupt status clear register for GPIO0-24 */ #define GPIO_STATUS_W1TC 0x01FFFFFFU #define GPIO_STATUS_W1TC_M (GPIO_STATUS_W1TC_V << GPIO_STATUS_W1TC_S) #define GPIO_STATUS_W1TC_V 0x01FFFFFFU #define GPIO_STATUS_W1TC_S 0 /** GPIO_PCPU_INT_REG register * GPIO PRO_CPU interrupt status register */ #define GPIO_PCPU_INT_REG (DR_REG_GPIO_BASE + 0x5c) /** GPIO_PROCPU_INT : RO; bitpos: [24:0]; default: 0; * GPIO PRO_CPU interrupt status register for GPIO0-24 */ #define GPIO_PROCPU_INT 0x01FFFFFFU #define GPIO_PROCPU_INT_M (GPIO_PROCPU_INT_V << GPIO_PROCPU_INT_S) #define GPIO_PROCPU_INT_V 0x01FFFFFFU #define GPIO_PROCPU_INT_S 0 /** GPIO_PCPU_NMI_INT_REG register * GPIO PRO_CPU(not shielded) interrupt status register */ #define GPIO_PCPU_NMI_INT_REG (DR_REG_GPIO_BASE + 0x60) /** GPIO_PROCPU_NMI_INT : RO; bitpos: [24:0]; default: 0; * GPIO PRO_CPU(not shielded) interrupt status register for GPIO0-24 */ #define GPIO_PROCPU_NMI_INT 0x01FFFFFFU #define GPIO_PROCPU_NMI_INT_M (GPIO_PROCPU_NMI_INT_V << GPIO_PROCPU_NMI_INT_S) #define GPIO_PROCPU_NMI_INT_V 0x01FFFFFFU #define GPIO_PROCPU_NMI_INT_S 0 /** GPIO_CPUSDIO_INT_REG register * GPIO CPUSDIO interrupt status register */ #define GPIO_CPUSDIO_INT_REG (DR_REG_GPIO_BASE + 0x64) /** GPIO_SDIO_INT : RO; bitpos: [24:0]; default: 0; * GPIO CPUSDIO interrupt status register for GPIO0-24 */ #define GPIO_SDIO_INT 0x01FFFFFFU #define GPIO_SDIO_INT_M (GPIO_SDIO_INT_V << GPIO_SDIO_INT_S) #define GPIO_SDIO_INT_V 0x01FFFFFFU #define GPIO_SDIO_INT_S 0 /** GPIO_PIN0_REG register * GPIO pin configuration register */ #define GPIO_PIN0_REG (DR_REG_GPIO_BASE + 0x74) /** GPIO_PIN0_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN0_SYNC2_BYPASS 0x00000003U #define GPIO_PIN0_SYNC2_BYPASS_M (GPIO_PIN0_SYNC2_BYPASS_V << GPIO_PIN0_SYNC2_BYPASS_S) #define GPIO_PIN0_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN0_SYNC2_BYPASS_S 0 /** GPIO_PIN0_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN0_PAD_DRIVER (BIT(2)) #define GPIO_PIN0_PAD_DRIVER_M (GPIO_PIN0_PAD_DRIVER_V << GPIO_PIN0_PAD_DRIVER_S) #define GPIO_PIN0_PAD_DRIVER_V 0x00000001U #define GPIO_PIN0_PAD_DRIVER_S 2 /** GPIO_PIN0_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN0_SYNC1_BYPASS 0x00000003U #define GPIO_PIN0_SYNC1_BYPASS_M (GPIO_PIN0_SYNC1_BYPASS_V << GPIO_PIN0_SYNC1_BYPASS_S) #define GPIO_PIN0_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN0_SYNC1_BYPASS_S 3 /** GPIO_PIN0_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN0_INT_TYPE 0x00000007U #define GPIO_PIN0_INT_TYPE_M (GPIO_PIN0_INT_TYPE_V << GPIO_PIN0_INT_TYPE_S) #define GPIO_PIN0_INT_TYPE_V 0x00000007U #define GPIO_PIN0_INT_TYPE_S 7 /** GPIO_PIN0_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN0_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN0_WAKEUP_ENABLE_M (GPIO_PIN0_WAKEUP_ENABLE_V << GPIO_PIN0_WAKEUP_ENABLE_S) #define GPIO_PIN0_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN0_WAKEUP_ENABLE_S 10 /** GPIO_PIN0_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN0_CONFIG 0x00000003U #define GPIO_PIN0_CONFIG_M (GPIO_PIN0_CONFIG_V << GPIO_PIN0_CONFIG_S) #define GPIO_PIN0_CONFIG_V 0x00000003U #define GPIO_PIN0_CONFIG_S 11 /** GPIO_PIN0_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN0_INT_ENA 0x0000001FU #define GPIO_PIN0_INT_ENA_M (GPIO_PIN0_INT_ENA_V << GPIO_PIN0_INT_ENA_S) #define GPIO_PIN0_INT_ENA_V 0x0000001FU #define GPIO_PIN0_INT_ENA_S 13 /** GPIO_PIN1_REG register * GPIO pin configuration register */ #define GPIO_PIN1_REG (DR_REG_GPIO_BASE + 0x78) /** GPIO_PIN1_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN1_SYNC2_BYPASS 0x00000003U #define GPIO_PIN1_SYNC2_BYPASS_M (GPIO_PIN1_SYNC2_BYPASS_V << GPIO_PIN1_SYNC2_BYPASS_S) #define GPIO_PIN1_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN1_SYNC2_BYPASS_S 0 /** GPIO_PIN1_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN1_PAD_DRIVER (BIT(2)) #define GPIO_PIN1_PAD_DRIVER_M (GPIO_PIN1_PAD_DRIVER_V << GPIO_PIN1_PAD_DRIVER_S) #define GPIO_PIN1_PAD_DRIVER_V 0x00000001U #define GPIO_PIN1_PAD_DRIVER_S 2 /** GPIO_PIN1_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN1_SYNC1_BYPASS 0x00000003U #define GPIO_PIN1_SYNC1_BYPASS_M (GPIO_PIN1_SYNC1_BYPASS_V << GPIO_PIN1_SYNC1_BYPASS_S) #define GPIO_PIN1_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN1_SYNC1_BYPASS_S 3 /** GPIO_PIN1_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN1_INT_TYPE 0x00000007U #define GPIO_PIN1_INT_TYPE_M (GPIO_PIN1_INT_TYPE_V << GPIO_PIN1_INT_TYPE_S) #define GPIO_PIN1_INT_TYPE_V 0x00000007U #define GPIO_PIN1_INT_TYPE_S 7 /** GPIO_PIN1_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN1_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN1_WAKEUP_ENABLE_M (GPIO_PIN1_WAKEUP_ENABLE_V << GPIO_PIN1_WAKEUP_ENABLE_S) #define GPIO_PIN1_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN1_WAKEUP_ENABLE_S 10 /** GPIO_PIN1_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN1_CONFIG 0x00000003U #define GPIO_PIN1_CONFIG_M (GPIO_PIN1_CONFIG_V << GPIO_PIN1_CONFIG_S) #define GPIO_PIN1_CONFIG_V 0x00000003U #define GPIO_PIN1_CONFIG_S 11 /** GPIO_PIN1_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN1_INT_ENA 0x0000001FU #define GPIO_PIN1_INT_ENA_M (GPIO_PIN1_INT_ENA_V << GPIO_PIN1_INT_ENA_S) #define GPIO_PIN1_INT_ENA_V 0x0000001FU #define GPIO_PIN1_INT_ENA_S 13 /** GPIO_PIN2_REG register * GPIO pin configuration register */ #define GPIO_PIN2_REG (DR_REG_GPIO_BASE + 0x7c) /** GPIO_PIN2_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN2_SYNC2_BYPASS 0x00000003U #define GPIO_PIN2_SYNC2_BYPASS_M (GPIO_PIN2_SYNC2_BYPASS_V << GPIO_PIN2_SYNC2_BYPASS_S) #define GPIO_PIN2_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN2_SYNC2_BYPASS_S 0 /** GPIO_PIN2_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN2_PAD_DRIVER (BIT(2)) #define GPIO_PIN2_PAD_DRIVER_M (GPIO_PIN2_PAD_DRIVER_V << GPIO_PIN2_PAD_DRIVER_S) #define GPIO_PIN2_PAD_DRIVER_V 0x00000001U #define GPIO_PIN2_PAD_DRIVER_S 2 /** GPIO_PIN2_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN2_SYNC1_BYPASS 0x00000003U #define GPIO_PIN2_SYNC1_BYPASS_M (GPIO_PIN2_SYNC1_BYPASS_V << GPIO_PIN2_SYNC1_BYPASS_S) #define GPIO_PIN2_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN2_SYNC1_BYPASS_S 3 /** GPIO_PIN2_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN2_INT_TYPE 0x00000007U #define GPIO_PIN2_INT_TYPE_M (GPIO_PIN2_INT_TYPE_V << GPIO_PIN2_INT_TYPE_S) #define GPIO_PIN2_INT_TYPE_V 0x00000007U #define GPIO_PIN2_INT_TYPE_S 7 /** GPIO_PIN2_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN2_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN2_WAKEUP_ENABLE_M (GPIO_PIN2_WAKEUP_ENABLE_V << GPIO_PIN2_WAKEUP_ENABLE_S) #define GPIO_PIN2_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN2_WAKEUP_ENABLE_S 10 /** GPIO_PIN2_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN2_CONFIG 0x00000003U #define GPIO_PIN2_CONFIG_M (GPIO_PIN2_CONFIG_V << GPIO_PIN2_CONFIG_S) #define GPIO_PIN2_CONFIG_V 0x00000003U #define GPIO_PIN2_CONFIG_S 11 /** GPIO_PIN2_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN2_INT_ENA 0x0000001FU #define GPIO_PIN2_INT_ENA_M (GPIO_PIN2_INT_ENA_V << GPIO_PIN2_INT_ENA_S) #define GPIO_PIN2_INT_ENA_V 0x0000001FU #define GPIO_PIN2_INT_ENA_S 13 /** GPIO_PIN3_REG register * GPIO pin configuration register */ #define GPIO_PIN3_REG (DR_REG_GPIO_BASE + 0x80) /** GPIO_PIN3_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN3_SYNC2_BYPASS 0x00000003U #define GPIO_PIN3_SYNC2_BYPASS_M (GPIO_PIN3_SYNC2_BYPASS_V << GPIO_PIN3_SYNC2_BYPASS_S) #define GPIO_PIN3_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN3_SYNC2_BYPASS_S 0 /** GPIO_PIN3_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN3_PAD_DRIVER (BIT(2)) #define GPIO_PIN3_PAD_DRIVER_M (GPIO_PIN3_PAD_DRIVER_V << GPIO_PIN3_PAD_DRIVER_S) #define GPIO_PIN3_PAD_DRIVER_V 0x00000001U #define GPIO_PIN3_PAD_DRIVER_S 2 /** GPIO_PIN3_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN3_SYNC1_BYPASS 0x00000003U #define GPIO_PIN3_SYNC1_BYPASS_M (GPIO_PIN3_SYNC1_BYPASS_V << GPIO_PIN3_SYNC1_BYPASS_S) #define GPIO_PIN3_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN3_SYNC1_BYPASS_S 3 /** GPIO_PIN3_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN3_INT_TYPE 0x00000007U #define GPIO_PIN3_INT_TYPE_M (GPIO_PIN3_INT_TYPE_V << GPIO_PIN3_INT_TYPE_S) #define GPIO_PIN3_INT_TYPE_V 0x00000007U #define GPIO_PIN3_INT_TYPE_S 7 /** GPIO_PIN3_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN3_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN3_WAKEUP_ENABLE_M (GPIO_PIN3_WAKEUP_ENABLE_V << GPIO_PIN3_WAKEUP_ENABLE_S) #define GPIO_PIN3_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN3_WAKEUP_ENABLE_S 10 /** GPIO_PIN3_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN3_CONFIG 0x00000003U #define GPIO_PIN3_CONFIG_M (GPIO_PIN3_CONFIG_V << GPIO_PIN3_CONFIG_S) #define GPIO_PIN3_CONFIG_V 0x00000003U #define GPIO_PIN3_CONFIG_S 11 /** GPIO_PIN3_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN3_INT_ENA 0x0000001FU #define GPIO_PIN3_INT_ENA_M (GPIO_PIN3_INT_ENA_V << GPIO_PIN3_INT_ENA_S) #define GPIO_PIN3_INT_ENA_V 0x0000001FU #define GPIO_PIN3_INT_ENA_S 13 /** GPIO_PIN4_REG register * GPIO pin configuration register */ #define GPIO_PIN4_REG (DR_REG_GPIO_BASE + 0x84) /** GPIO_PIN4_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN4_SYNC2_BYPASS 0x00000003U #define GPIO_PIN4_SYNC2_BYPASS_M (GPIO_PIN4_SYNC2_BYPASS_V << GPIO_PIN4_SYNC2_BYPASS_S) #define GPIO_PIN4_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN4_SYNC2_BYPASS_S 0 /** GPIO_PIN4_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN4_PAD_DRIVER (BIT(2)) #define GPIO_PIN4_PAD_DRIVER_M (GPIO_PIN4_PAD_DRIVER_V << GPIO_PIN4_PAD_DRIVER_S) #define GPIO_PIN4_PAD_DRIVER_V 0x00000001U #define GPIO_PIN4_PAD_DRIVER_S 2 /** GPIO_PIN4_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN4_SYNC1_BYPASS 0x00000003U #define GPIO_PIN4_SYNC1_BYPASS_M (GPIO_PIN4_SYNC1_BYPASS_V << GPIO_PIN4_SYNC1_BYPASS_S) #define GPIO_PIN4_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN4_SYNC1_BYPASS_S 3 /** GPIO_PIN4_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN4_INT_TYPE 0x00000007U #define GPIO_PIN4_INT_TYPE_M (GPIO_PIN4_INT_TYPE_V << GPIO_PIN4_INT_TYPE_S) #define GPIO_PIN4_INT_TYPE_V 0x00000007U #define GPIO_PIN4_INT_TYPE_S 7 /** GPIO_PIN4_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN4_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN4_WAKEUP_ENABLE_M (GPIO_PIN4_WAKEUP_ENABLE_V << GPIO_PIN4_WAKEUP_ENABLE_S) #define GPIO_PIN4_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN4_WAKEUP_ENABLE_S 10 /** GPIO_PIN4_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN4_CONFIG 0x00000003U #define GPIO_PIN4_CONFIG_M (GPIO_PIN4_CONFIG_V << GPIO_PIN4_CONFIG_S) #define GPIO_PIN4_CONFIG_V 0x00000003U #define GPIO_PIN4_CONFIG_S 11 /** GPIO_PIN4_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN4_INT_ENA 0x0000001FU #define GPIO_PIN4_INT_ENA_M (GPIO_PIN4_INT_ENA_V << GPIO_PIN4_INT_ENA_S) #define GPIO_PIN4_INT_ENA_V 0x0000001FU #define GPIO_PIN4_INT_ENA_S 13 /** GPIO_PIN5_REG register * GPIO pin configuration register */ #define GPIO_PIN5_REG (DR_REG_GPIO_BASE + 0x88) /** GPIO_PIN5_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN5_SYNC2_BYPASS 0x00000003U #define GPIO_PIN5_SYNC2_BYPASS_M (GPIO_PIN5_SYNC2_BYPASS_V << GPIO_PIN5_SYNC2_BYPASS_S) #define GPIO_PIN5_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN5_SYNC2_BYPASS_S 0 /** GPIO_PIN5_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN5_PAD_DRIVER (BIT(2)) #define GPIO_PIN5_PAD_DRIVER_M (GPIO_PIN5_PAD_DRIVER_V << GPIO_PIN5_PAD_DRIVER_S) #define GPIO_PIN5_PAD_DRIVER_V 0x00000001U #define GPIO_PIN5_PAD_DRIVER_S 2 /** GPIO_PIN5_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN5_SYNC1_BYPASS 0x00000003U #define GPIO_PIN5_SYNC1_BYPASS_M (GPIO_PIN5_SYNC1_BYPASS_V << GPIO_PIN5_SYNC1_BYPASS_S) #define GPIO_PIN5_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN5_SYNC1_BYPASS_S 3 /** GPIO_PIN5_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN5_INT_TYPE 0x00000007U #define GPIO_PIN5_INT_TYPE_M (GPIO_PIN5_INT_TYPE_V << GPIO_PIN5_INT_TYPE_S) #define GPIO_PIN5_INT_TYPE_V 0x00000007U #define GPIO_PIN5_INT_TYPE_S 7 /** GPIO_PIN5_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN5_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN5_WAKEUP_ENABLE_M (GPIO_PIN5_WAKEUP_ENABLE_V << GPIO_PIN5_WAKEUP_ENABLE_S) #define GPIO_PIN5_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN5_WAKEUP_ENABLE_S 10 /** GPIO_PIN5_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN5_CONFIG 0x00000003U #define GPIO_PIN5_CONFIG_M (GPIO_PIN5_CONFIG_V << GPIO_PIN5_CONFIG_S) #define GPIO_PIN5_CONFIG_V 0x00000003U #define GPIO_PIN5_CONFIG_S 11 /** GPIO_PIN5_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN5_INT_ENA 0x0000001FU #define GPIO_PIN5_INT_ENA_M (GPIO_PIN5_INT_ENA_V << GPIO_PIN5_INT_ENA_S) #define GPIO_PIN5_INT_ENA_V 0x0000001FU #define GPIO_PIN5_INT_ENA_S 13 /** GPIO_PIN6_REG register * GPIO pin configuration register */ #define GPIO_PIN6_REG (DR_REG_GPIO_BASE + 0x8c) /** GPIO_PIN6_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN6_SYNC2_BYPASS 0x00000003U #define GPIO_PIN6_SYNC2_BYPASS_M (GPIO_PIN6_SYNC2_BYPASS_V << GPIO_PIN6_SYNC2_BYPASS_S) #define GPIO_PIN6_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN6_SYNC2_BYPASS_S 0 /** GPIO_PIN6_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN6_PAD_DRIVER (BIT(2)) #define GPIO_PIN6_PAD_DRIVER_M (GPIO_PIN6_PAD_DRIVER_V << GPIO_PIN6_PAD_DRIVER_S) #define GPIO_PIN6_PAD_DRIVER_V 0x00000001U #define GPIO_PIN6_PAD_DRIVER_S 2 /** GPIO_PIN6_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN6_SYNC1_BYPASS 0x00000003U #define GPIO_PIN6_SYNC1_BYPASS_M (GPIO_PIN6_SYNC1_BYPASS_V << GPIO_PIN6_SYNC1_BYPASS_S) #define GPIO_PIN6_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN6_SYNC1_BYPASS_S 3 /** GPIO_PIN6_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN6_INT_TYPE 0x00000007U #define GPIO_PIN6_INT_TYPE_M (GPIO_PIN6_INT_TYPE_V << GPIO_PIN6_INT_TYPE_S) #define GPIO_PIN6_INT_TYPE_V 0x00000007U #define GPIO_PIN6_INT_TYPE_S 7 /** GPIO_PIN6_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN6_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN6_WAKEUP_ENABLE_M (GPIO_PIN6_WAKEUP_ENABLE_V << GPIO_PIN6_WAKEUP_ENABLE_S) #define GPIO_PIN6_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN6_WAKEUP_ENABLE_S 10 /** GPIO_PIN6_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN6_CONFIG 0x00000003U #define GPIO_PIN6_CONFIG_M (GPIO_PIN6_CONFIG_V << GPIO_PIN6_CONFIG_S) #define GPIO_PIN6_CONFIG_V 0x00000003U #define GPIO_PIN6_CONFIG_S 11 /** GPIO_PIN6_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN6_INT_ENA 0x0000001FU #define GPIO_PIN6_INT_ENA_M (GPIO_PIN6_INT_ENA_V << GPIO_PIN6_INT_ENA_S) #define GPIO_PIN6_INT_ENA_V 0x0000001FU #define GPIO_PIN6_INT_ENA_S 13 /** GPIO_PIN7_REG register * GPIO pin configuration register */ #define GPIO_PIN7_REG (DR_REG_GPIO_BASE + 0x90) /** GPIO_PIN7_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN7_SYNC2_BYPASS 0x00000003U #define GPIO_PIN7_SYNC2_BYPASS_M (GPIO_PIN7_SYNC2_BYPASS_V << GPIO_PIN7_SYNC2_BYPASS_S) #define GPIO_PIN7_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN7_SYNC2_BYPASS_S 0 /** GPIO_PIN7_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN7_PAD_DRIVER (BIT(2)) #define GPIO_PIN7_PAD_DRIVER_M (GPIO_PIN7_PAD_DRIVER_V << GPIO_PIN7_PAD_DRIVER_S) #define GPIO_PIN7_PAD_DRIVER_V 0x00000001U #define GPIO_PIN7_PAD_DRIVER_S 2 /** GPIO_PIN7_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN7_SYNC1_BYPASS 0x00000003U #define GPIO_PIN7_SYNC1_BYPASS_M (GPIO_PIN7_SYNC1_BYPASS_V << GPIO_PIN7_SYNC1_BYPASS_S) #define GPIO_PIN7_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN7_SYNC1_BYPASS_S 3 /** GPIO_PIN7_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN7_INT_TYPE 0x00000007U #define GPIO_PIN7_INT_TYPE_M (GPIO_PIN7_INT_TYPE_V << GPIO_PIN7_INT_TYPE_S) #define GPIO_PIN7_INT_TYPE_V 0x00000007U #define GPIO_PIN7_INT_TYPE_S 7 /** GPIO_PIN7_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN7_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN7_WAKEUP_ENABLE_M (GPIO_PIN7_WAKEUP_ENABLE_V << GPIO_PIN7_WAKEUP_ENABLE_S) #define GPIO_PIN7_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN7_WAKEUP_ENABLE_S 10 /** GPIO_PIN7_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN7_CONFIG 0x00000003U #define GPIO_PIN7_CONFIG_M (GPIO_PIN7_CONFIG_V << GPIO_PIN7_CONFIG_S) #define GPIO_PIN7_CONFIG_V 0x00000003U #define GPIO_PIN7_CONFIG_S 11 /** GPIO_PIN7_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN7_INT_ENA 0x0000001FU #define GPIO_PIN7_INT_ENA_M (GPIO_PIN7_INT_ENA_V << GPIO_PIN7_INT_ENA_S) #define GPIO_PIN7_INT_ENA_V 0x0000001FU #define GPIO_PIN7_INT_ENA_S 13 /** GPIO_PIN8_REG register * GPIO pin configuration register */ #define GPIO_PIN8_REG (DR_REG_GPIO_BASE + 0x94) /** GPIO_PIN8_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN8_SYNC2_BYPASS 0x00000003U #define GPIO_PIN8_SYNC2_BYPASS_M (GPIO_PIN8_SYNC2_BYPASS_V << GPIO_PIN8_SYNC2_BYPASS_S) #define GPIO_PIN8_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN8_SYNC2_BYPASS_S 0 /** GPIO_PIN8_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN8_PAD_DRIVER (BIT(2)) #define GPIO_PIN8_PAD_DRIVER_M (GPIO_PIN8_PAD_DRIVER_V << GPIO_PIN8_PAD_DRIVER_S) #define GPIO_PIN8_PAD_DRIVER_V 0x00000001U #define GPIO_PIN8_PAD_DRIVER_S 2 /** GPIO_PIN8_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN8_SYNC1_BYPASS 0x00000003U #define GPIO_PIN8_SYNC1_BYPASS_M (GPIO_PIN8_SYNC1_BYPASS_V << GPIO_PIN8_SYNC1_BYPASS_S) #define GPIO_PIN8_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN8_SYNC1_BYPASS_S 3 /** GPIO_PIN8_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN8_INT_TYPE 0x00000007U #define GPIO_PIN8_INT_TYPE_M (GPIO_PIN8_INT_TYPE_V << GPIO_PIN8_INT_TYPE_S) #define GPIO_PIN8_INT_TYPE_V 0x00000007U #define GPIO_PIN8_INT_TYPE_S 7 /** GPIO_PIN8_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN8_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN8_WAKEUP_ENABLE_M (GPIO_PIN8_WAKEUP_ENABLE_V << GPIO_PIN8_WAKEUP_ENABLE_S) #define GPIO_PIN8_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN8_WAKEUP_ENABLE_S 10 /** GPIO_PIN8_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN8_CONFIG 0x00000003U #define GPIO_PIN8_CONFIG_M (GPIO_PIN8_CONFIG_V << GPIO_PIN8_CONFIG_S) #define GPIO_PIN8_CONFIG_V 0x00000003U #define GPIO_PIN8_CONFIG_S 11 /** GPIO_PIN8_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN8_INT_ENA 0x0000001FU #define GPIO_PIN8_INT_ENA_M (GPIO_PIN8_INT_ENA_V << GPIO_PIN8_INT_ENA_S) #define GPIO_PIN8_INT_ENA_V 0x0000001FU #define GPIO_PIN8_INT_ENA_S 13 /** GPIO_PIN9_REG register * GPIO pin configuration register */ #define GPIO_PIN9_REG (DR_REG_GPIO_BASE + 0x98) /** GPIO_PIN9_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN9_SYNC2_BYPASS 0x00000003U #define GPIO_PIN9_SYNC2_BYPASS_M (GPIO_PIN9_SYNC2_BYPASS_V << GPIO_PIN9_SYNC2_BYPASS_S) #define GPIO_PIN9_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN9_SYNC2_BYPASS_S 0 /** GPIO_PIN9_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN9_PAD_DRIVER (BIT(2)) #define GPIO_PIN9_PAD_DRIVER_M (GPIO_PIN9_PAD_DRIVER_V << GPIO_PIN9_PAD_DRIVER_S) #define GPIO_PIN9_PAD_DRIVER_V 0x00000001U #define GPIO_PIN9_PAD_DRIVER_S 2 /** GPIO_PIN9_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN9_SYNC1_BYPASS 0x00000003U #define GPIO_PIN9_SYNC1_BYPASS_M (GPIO_PIN9_SYNC1_BYPASS_V << GPIO_PIN9_SYNC1_BYPASS_S) #define GPIO_PIN9_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN9_SYNC1_BYPASS_S 3 /** GPIO_PIN9_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN9_INT_TYPE 0x00000007U #define GPIO_PIN9_INT_TYPE_M (GPIO_PIN9_INT_TYPE_V << GPIO_PIN9_INT_TYPE_S) #define GPIO_PIN9_INT_TYPE_V 0x00000007U #define GPIO_PIN9_INT_TYPE_S 7 /** GPIO_PIN9_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN9_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN9_WAKEUP_ENABLE_M (GPIO_PIN9_WAKEUP_ENABLE_V << GPIO_PIN9_WAKEUP_ENABLE_S) #define GPIO_PIN9_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN9_WAKEUP_ENABLE_S 10 /** GPIO_PIN9_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN9_CONFIG 0x00000003U #define GPIO_PIN9_CONFIG_M (GPIO_PIN9_CONFIG_V << GPIO_PIN9_CONFIG_S) #define GPIO_PIN9_CONFIG_V 0x00000003U #define GPIO_PIN9_CONFIG_S 11 /** GPIO_PIN9_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN9_INT_ENA 0x0000001FU #define GPIO_PIN9_INT_ENA_M (GPIO_PIN9_INT_ENA_V << GPIO_PIN9_INT_ENA_S) #define GPIO_PIN9_INT_ENA_V 0x0000001FU #define GPIO_PIN9_INT_ENA_S 13 /** GPIO_PIN10_REG register * GPIO pin configuration register */ #define GPIO_PIN10_REG (DR_REG_GPIO_BASE + 0x9c) /** GPIO_PIN10_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN10_SYNC2_BYPASS 0x00000003U #define GPIO_PIN10_SYNC2_BYPASS_M (GPIO_PIN10_SYNC2_BYPASS_V << GPIO_PIN10_SYNC2_BYPASS_S) #define GPIO_PIN10_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN10_SYNC2_BYPASS_S 0 /** GPIO_PIN10_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN10_PAD_DRIVER (BIT(2)) #define GPIO_PIN10_PAD_DRIVER_M (GPIO_PIN10_PAD_DRIVER_V << GPIO_PIN10_PAD_DRIVER_S) #define GPIO_PIN10_PAD_DRIVER_V 0x00000001U #define GPIO_PIN10_PAD_DRIVER_S 2 /** GPIO_PIN10_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN10_SYNC1_BYPASS 0x00000003U #define GPIO_PIN10_SYNC1_BYPASS_M (GPIO_PIN10_SYNC1_BYPASS_V << GPIO_PIN10_SYNC1_BYPASS_S) #define GPIO_PIN10_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN10_SYNC1_BYPASS_S 3 /** GPIO_PIN10_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN10_INT_TYPE 0x00000007U #define GPIO_PIN10_INT_TYPE_M (GPIO_PIN10_INT_TYPE_V << GPIO_PIN10_INT_TYPE_S) #define GPIO_PIN10_INT_TYPE_V 0x00000007U #define GPIO_PIN10_INT_TYPE_S 7 /** GPIO_PIN10_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN10_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN10_WAKEUP_ENABLE_M (GPIO_PIN10_WAKEUP_ENABLE_V << GPIO_PIN10_WAKEUP_ENABLE_S) #define GPIO_PIN10_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN10_WAKEUP_ENABLE_S 10 /** GPIO_PIN10_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN10_CONFIG 0x00000003U #define GPIO_PIN10_CONFIG_M (GPIO_PIN10_CONFIG_V << GPIO_PIN10_CONFIG_S) #define GPIO_PIN10_CONFIG_V 0x00000003U #define GPIO_PIN10_CONFIG_S 11 /** GPIO_PIN10_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN10_INT_ENA 0x0000001FU #define GPIO_PIN10_INT_ENA_M (GPIO_PIN10_INT_ENA_V << GPIO_PIN10_INT_ENA_S) #define GPIO_PIN10_INT_ENA_V 0x0000001FU #define GPIO_PIN10_INT_ENA_S 13 /** GPIO_PIN11_REG register * GPIO pin configuration register */ #define GPIO_PIN11_REG (DR_REG_GPIO_BASE + 0xa0) /** GPIO_PIN11_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN11_SYNC2_BYPASS 0x00000003U #define GPIO_PIN11_SYNC2_BYPASS_M (GPIO_PIN11_SYNC2_BYPASS_V << GPIO_PIN11_SYNC2_BYPASS_S) #define GPIO_PIN11_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN11_SYNC2_BYPASS_S 0 /** GPIO_PIN11_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN11_PAD_DRIVER (BIT(2)) #define GPIO_PIN11_PAD_DRIVER_M (GPIO_PIN11_PAD_DRIVER_V << GPIO_PIN11_PAD_DRIVER_S) #define GPIO_PIN11_PAD_DRIVER_V 0x00000001U #define GPIO_PIN11_PAD_DRIVER_S 2 /** GPIO_PIN11_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN11_SYNC1_BYPASS 0x00000003U #define GPIO_PIN11_SYNC1_BYPASS_M (GPIO_PIN11_SYNC1_BYPASS_V << GPIO_PIN11_SYNC1_BYPASS_S) #define GPIO_PIN11_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN11_SYNC1_BYPASS_S 3 /** GPIO_PIN11_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN11_INT_TYPE 0x00000007U #define GPIO_PIN11_INT_TYPE_M (GPIO_PIN11_INT_TYPE_V << GPIO_PIN11_INT_TYPE_S) #define GPIO_PIN11_INT_TYPE_V 0x00000007U #define GPIO_PIN11_INT_TYPE_S 7 /** GPIO_PIN11_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN11_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN11_WAKEUP_ENABLE_M (GPIO_PIN11_WAKEUP_ENABLE_V << GPIO_PIN11_WAKEUP_ENABLE_S) #define GPIO_PIN11_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN11_WAKEUP_ENABLE_S 10 /** GPIO_PIN11_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN11_CONFIG 0x00000003U #define GPIO_PIN11_CONFIG_M (GPIO_PIN11_CONFIG_V << GPIO_PIN11_CONFIG_S) #define GPIO_PIN11_CONFIG_V 0x00000003U #define GPIO_PIN11_CONFIG_S 11 /** GPIO_PIN11_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN11_INT_ENA 0x0000001FU #define GPIO_PIN11_INT_ENA_M (GPIO_PIN11_INT_ENA_V << GPIO_PIN11_INT_ENA_S) #define GPIO_PIN11_INT_ENA_V 0x0000001FU #define GPIO_PIN11_INT_ENA_S 13 /** GPIO_PIN12_REG register * GPIO pin configuration register */ #define GPIO_PIN12_REG (DR_REG_GPIO_BASE + 0xa4) /** GPIO_PIN12_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN12_SYNC2_BYPASS 0x00000003U #define GPIO_PIN12_SYNC2_BYPASS_M (GPIO_PIN12_SYNC2_BYPASS_V << GPIO_PIN12_SYNC2_BYPASS_S) #define GPIO_PIN12_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN12_SYNC2_BYPASS_S 0 /** GPIO_PIN12_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN12_PAD_DRIVER (BIT(2)) #define GPIO_PIN12_PAD_DRIVER_M (GPIO_PIN12_PAD_DRIVER_V << GPIO_PIN12_PAD_DRIVER_S) #define GPIO_PIN12_PAD_DRIVER_V 0x00000001U #define GPIO_PIN12_PAD_DRIVER_S 2 /** GPIO_PIN12_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN12_SYNC1_BYPASS 0x00000003U #define GPIO_PIN12_SYNC1_BYPASS_M (GPIO_PIN12_SYNC1_BYPASS_V << GPIO_PIN12_SYNC1_BYPASS_S) #define GPIO_PIN12_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN12_SYNC1_BYPASS_S 3 /** GPIO_PIN12_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN12_INT_TYPE 0x00000007U #define GPIO_PIN12_INT_TYPE_M (GPIO_PIN12_INT_TYPE_V << GPIO_PIN12_INT_TYPE_S) #define GPIO_PIN12_INT_TYPE_V 0x00000007U #define GPIO_PIN12_INT_TYPE_S 7 /** GPIO_PIN12_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN12_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN12_WAKEUP_ENABLE_M (GPIO_PIN12_WAKEUP_ENABLE_V << GPIO_PIN12_WAKEUP_ENABLE_S) #define GPIO_PIN12_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN12_WAKEUP_ENABLE_S 10 /** GPIO_PIN12_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN12_CONFIG 0x00000003U #define GPIO_PIN12_CONFIG_M (GPIO_PIN12_CONFIG_V << GPIO_PIN12_CONFIG_S) #define GPIO_PIN12_CONFIG_V 0x00000003U #define GPIO_PIN12_CONFIG_S 11 /** GPIO_PIN12_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN12_INT_ENA 0x0000001FU #define GPIO_PIN12_INT_ENA_M (GPIO_PIN12_INT_ENA_V << GPIO_PIN12_INT_ENA_S) #define GPIO_PIN12_INT_ENA_V 0x0000001FU #define GPIO_PIN12_INT_ENA_S 13 /** GPIO_PIN13_REG register * GPIO pin configuration register */ #define GPIO_PIN13_REG (DR_REG_GPIO_BASE + 0xa8) /** GPIO_PIN13_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN13_SYNC2_BYPASS 0x00000003U #define GPIO_PIN13_SYNC2_BYPASS_M (GPIO_PIN13_SYNC2_BYPASS_V << GPIO_PIN13_SYNC2_BYPASS_S) #define GPIO_PIN13_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN13_SYNC2_BYPASS_S 0 /** GPIO_PIN13_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN13_PAD_DRIVER (BIT(2)) #define GPIO_PIN13_PAD_DRIVER_M (GPIO_PIN13_PAD_DRIVER_V << GPIO_PIN13_PAD_DRIVER_S) #define GPIO_PIN13_PAD_DRIVER_V 0x00000001U #define GPIO_PIN13_PAD_DRIVER_S 2 /** GPIO_PIN13_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN13_SYNC1_BYPASS 0x00000003U #define GPIO_PIN13_SYNC1_BYPASS_M (GPIO_PIN13_SYNC1_BYPASS_V << GPIO_PIN13_SYNC1_BYPASS_S) #define GPIO_PIN13_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN13_SYNC1_BYPASS_S 3 /** GPIO_PIN13_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN13_INT_TYPE 0x00000007U #define GPIO_PIN13_INT_TYPE_M (GPIO_PIN13_INT_TYPE_V << GPIO_PIN13_INT_TYPE_S) #define GPIO_PIN13_INT_TYPE_V 0x00000007U #define GPIO_PIN13_INT_TYPE_S 7 /** GPIO_PIN13_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN13_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN13_WAKEUP_ENABLE_M (GPIO_PIN13_WAKEUP_ENABLE_V << GPIO_PIN13_WAKEUP_ENABLE_S) #define GPIO_PIN13_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN13_WAKEUP_ENABLE_S 10 /** GPIO_PIN13_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN13_CONFIG 0x00000003U #define GPIO_PIN13_CONFIG_M (GPIO_PIN13_CONFIG_V << GPIO_PIN13_CONFIG_S) #define GPIO_PIN13_CONFIG_V 0x00000003U #define GPIO_PIN13_CONFIG_S 11 /** GPIO_PIN13_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN13_INT_ENA 0x0000001FU #define GPIO_PIN13_INT_ENA_M (GPIO_PIN13_INT_ENA_V << GPIO_PIN13_INT_ENA_S) #define GPIO_PIN13_INT_ENA_V 0x0000001FU #define GPIO_PIN13_INT_ENA_S 13 /** GPIO_PIN14_REG register * GPIO pin configuration register */ #define GPIO_PIN14_REG (DR_REG_GPIO_BASE + 0xac) /** GPIO_PIN14_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN14_SYNC2_BYPASS 0x00000003U #define GPIO_PIN14_SYNC2_BYPASS_M (GPIO_PIN14_SYNC2_BYPASS_V << GPIO_PIN14_SYNC2_BYPASS_S) #define GPIO_PIN14_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN14_SYNC2_BYPASS_S 0 /** GPIO_PIN14_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN14_PAD_DRIVER (BIT(2)) #define GPIO_PIN14_PAD_DRIVER_M (GPIO_PIN14_PAD_DRIVER_V << GPIO_PIN14_PAD_DRIVER_S) #define GPIO_PIN14_PAD_DRIVER_V 0x00000001U #define GPIO_PIN14_PAD_DRIVER_S 2 /** GPIO_PIN14_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN14_SYNC1_BYPASS 0x00000003U #define GPIO_PIN14_SYNC1_BYPASS_M (GPIO_PIN14_SYNC1_BYPASS_V << GPIO_PIN14_SYNC1_BYPASS_S) #define GPIO_PIN14_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN14_SYNC1_BYPASS_S 3 /** GPIO_PIN14_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN14_INT_TYPE 0x00000007U #define GPIO_PIN14_INT_TYPE_M (GPIO_PIN14_INT_TYPE_V << GPIO_PIN14_INT_TYPE_S) #define GPIO_PIN14_INT_TYPE_V 0x00000007U #define GPIO_PIN14_INT_TYPE_S 7 /** GPIO_PIN14_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN14_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN14_WAKEUP_ENABLE_M (GPIO_PIN14_WAKEUP_ENABLE_V << GPIO_PIN14_WAKEUP_ENABLE_S) #define GPIO_PIN14_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN14_WAKEUP_ENABLE_S 10 /** GPIO_PIN14_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN14_CONFIG 0x00000003U #define GPIO_PIN14_CONFIG_M (GPIO_PIN14_CONFIG_V << GPIO_PIN14_CONFIG_S) #define GPIO_PIN14_CONFIG_V 0x00000003U #define GPIO_PIN14_CONFIG_S 11 /** GPIO_PIN14_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN14_INT_ENA 0x0000001FU #define GPIO_PIN14_INT_ENA_M (GPIO_PIN14_INT_ENA_V << GPIO_PIN14_INT_ENA_S) #define GPIO_PIN14_INT_ENA_V 0x0000001FU #define GPIO_PIN14_INT_ENA_S 13 /** GPIO_PIN15_REG register * GPIO pin configuration register */ #define GPIO_PIN15_REG (DR_REG_GPIO_BASE + 0xb0) /** GPIO_PIN15_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN15_SYNC2_BYPASS 0x00000003U #define GPIO_PIN15_SYNC2_BYPASS_M (GPIO_PIN15_SYNC2_BYPASS_V << GPIO_PIN15_SYNC2_BYPASS_S) #define GPIO_PIN15_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN15_SYNC2_BYPASS_S 0 /** GPIO_PIN15_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN15_PAD_DRIVER (BIT(2)) #define GPIO_PIN15_PAD_DRIVER_M (GPIO_PIN15_PAD_DRIVER_V << GPIO_PIN15_PAD_DRIVER_S) #define GPIO_PIN15_PAD_DRIVER_V 0x00000001U #define GPIO_PIN15_PAD_DRIVER_S 2 /** GPIO_PIN15_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN15_SYNC1_BYPASS 0x00000003U #define GPIO_PIN15_SYNC1_BYPASS_M (GPIO_PIN15_SYNC1_BYPASS_V << GPIO_PIN15_SYNC1_BYPASS_S) #define GPIO_PIN15_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN15_SYNC1_BYPASS_S 3 /** GPIO_PIN15_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN15_INT_TYPE 0x00000007U #define GPIO_PIN15_INT_TYPE_M (GPIO_PIN15_INT_TYPE_V << GPIO_PIN15_INT_TYPE_S) #define GPIO_PIN15_INT_TYPE_V 0x00000007U #define GPIO_PIN15_INT_TYPE_S 7 /** GPIO_PIN15_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN15_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN15_WAKEUP_ENABLE_M (GPIO_PIN15_WAKEUP_ENABLE_V << GPIO_PIN15_WAKEUP_ENABLE_S) #define GPIO_PIN15_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN15_WAKEUP_ENABLE_S 10 /** GPIO_PIN15_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN15_CONFIG 0x00000003U #define GPIO_PIN15_CONFIG_M (GPIO_PIN15_CONFIG_V << GPIO_PIN15_CONFIG_S) #define GPIO_PIN15_CONFIG_V 0x00000003U #define GPIO_PIN15_CONFIG_S 11 /** GPIO_PIN15_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN15_INT_ENA 0x0000001FU #define GPIO_PIN15_INT_ENA_M (GPIO_PIN15_INT_ENA_V << GPIO_PIN15_INT_ENA_S) #define GPIO_PIN15_INT_ENA_V 0x0000001FU #define GPIO_PIN15_INT_ENA_S 13 /** GPIO_PIN16_REG register * GPIO pin configuration register */ #define GPIO_PIN16_REG (DR_REG_GPIO_BASE + 0xb4) /** GPIO_PIN16_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN16_SYNC2_BYPASS 0x00000003U #define GPIO_PIN16_SYNC2_BYPASS_M (GPIO_PIN16_SYNC2_BYPASS_V << GPIO_PIN16_SYNC2_BYPASS_S) #define GPIO_PIN16_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN16_SYNC2_BYPASS_S 0 /** GPIO_PIN16_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN16_PAD_DRIVER (BIT(2)) #define GPIO_PIN16_PAD_DRIVER_M (GPIO_PIN16_PAD_DRIVER_V << GPIO_PIN16_PAD_DRIVER_S) #define GPIO_PIN16_PAD_DRIVER_V 0x00000001U #define GPIO_PIN16_PAD_DRIVER_S 2 /** GPIO_PIN16_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN16_SYNC1_BYPASS 0x00000003U #define GPIO_PIN16_SYNC1_BYPASS_M (GPIO_PIN16_SYNC1_BYPASS_V << GPIO_PIN16_SYNC1_BYPASS_S) #define GPIO_PIN16_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN16_SYNC1_BYPASS_S 3 /** GPIO_PIN16_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN16_INT_TYPE 0x00000007U #define GPIO_PIN16_INT_TYPE_M (GPIO_PIN16_INT_TYPE_V << GPIO_PIN16_INT_TYPE_S) #define GPIO_PIN16_INT_TYPE_V 0x00000007U #define GPIO_PIN16_INT_TYPE_S 7 /** GPIO_PIN16_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN16_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN16_WAKEUP_ENABLE_M (GPIO_PIN16_WAKEUP_ENABLE_V << GPIO_PIN16_WAKEUP_ENABLE_S) #define GPIO_PIN16_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN16_WAKEUP_ENABLE_S 10 /** GPIO_PIN16_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN16_CONFIG 0x00000003U #define GPIO_PIN16_CONFIG_M (GPIO_PIN16_CONFIG_V << GPIO_PIN16_CONFIG_S) #define GPIO_PIN16_CONFIG_V 0x00000003U #define GPIO_PIN16_CONFIG_S 11 /** GPIO_PIN16_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN16_INT_ENA 0x0000001FU #define GPIO_PIN16_INT_ENA_M (GPIO_PIN16_INT_ENA_V << GPIO_PIN16_INT_ENA_S) #define GPIO_PIN16_INT_ENA_V 0x0000001FU #define GPIO_PIN16_INT_ENA_S 13 /** GPIO_PIN17_REG register * GPIO pin configuration register */ #define GPIO_PIN17_REG (DR_REG_GPIO_BASE + 0xb8) /** GPIO_PIN17_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN17_SYNC2_BYPASS 0x00000003U #define GPIO_PIN17_SYNC2_BYPASS_M (GPIO_PIN17_SYNC2_BYPASS_V << GPIO_PIN17_SYNC2_BYPASS_S) #define GPIO_PIN17_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN17_SYNC2_BYPASS_S 0 /** GPIO_PIN17_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN17_PAD_DRIVER (BIT(2)) #define GPIO_PIN17_PAD_DRIVER_M (GPIO_PIN17_PAD_DRIVER_V << GPIO_PIN17_PAD_DRIVER_S) #define GPIO_PIN17_PAD_DRIVER_V 0x00000001U #define GPIO_PIN17_PAD_DRIVER_S 2 /** GPIO_PIN17_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN17_SYNC1_BYPASS 0x00000003U #define GPIO_PIN17_SYNC1_BYPASS_M (GPIO_PIN17_SYNC1_BYPASS_V << GPIO_PIN17_SYNC1_BYPASS_S) #define GPIO_PIN17_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN17_SYNC1_BYPASS_S 3 /** GPIO_PIN17_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN17_INT_TYPE 0x00000007U #define GPIO_PIN17_INT_TYPE_M (GPIO_PIN17_INT_TYPE_V << GPIO_PIN17_INT_TYPE_S) #define GPIO_PIN17_INT_TYPE_V 0x00000007U #define GPIO_PIN17_INT_TYPE_S 7 /** GPIO_PIN17_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN17_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN17_WAKEUP_ENABLE_M (GPIO_PIN17_WAKEUP_ENABLE_V << GPIO_PIN17_WAKEUP_ENABLE_S) #define GPIO_PIN17_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN17_WAKEUP_ENABLE_S 10 /** GPIO_PIN17_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN17_CONFIG 0x00000003U #define GPIO_PIN17_CONFIG_M (GPIO_PIN17_CONFIG_V << GPIO_PIN17_CONFIG_S) #define GPIO_PIN17_CONFIG_V 0x00000003U #define GPIO_PIN17_CONFIG_S 11 /** GPIO_PIN17_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN17_INT_ENA 0x0000001FU #define GPIO_PIN17_INT_ENA_M (GPIO_PIN17_INT_ENA_V << GPIO_PIN17_INT_ENA_S) #define GPIO_PIN17_INT_ENA_V 0x0000001FU #define GPIO_PIN17_INT_ENA_S 13 /** GPIO_PIN18_REG register * GPIO pin configuration register */ #define GPIO_PIN18_REG (DR_REG_GPIO_BASE + 0xbc) /** GPIO_PIN18_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN18_SYNC2_BYPASS 0x00000003U #define GPIO_PIN18_SYNC2_BYPASS_M (GPIO_PIN18_SYNC2_BYPASS_V << GPIO_PIN18_SYNC2_BYPASS_S) #define GPIO_PIN18_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN18_SYNC2_BYPASS_S 0 /** GPIO_PIN18_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN18_PAD_DRIVER (BIT(2)) #define GPIO_PIN18_PAD_DRIVER_M (GPIO_PIN18_PAD_DRIVER_V << GPIO_PIN18_PAD_DRIVER_S) #define GPIO_PIN18_PAD_DRIVER_V 0x00000001U #define GPIO_PIN18_PAD_DRIVER_S 2 /** GPIO_PIN18_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN18_SYNC1_BYPASS 0x00000003U #define GPIO_PIN18_SYNC1_BYPASS_M (GPIO_PIN18_SYNC1_BYPASS_V << GPIO_PIN18_SYNC1_BYPASS_S) #define GPIO_PIN18_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN18_SYNC1_BYPASS_S 3 /** GPIO_PIN18_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN18_INT_TYPE 0x00000007U #define GPIO_PIN18_INT_TYPE_M (GPIO_PIN18_INT_TYPE_V << GPIO_PIN18_INT_TYPE_S) #define GPIO_PIN18_INT_TYPE_V 0x00000007U #define GPIO_PIN18_INT_TYPE_S 7 /** GPIO_PIN18_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN18_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN18_WAKEUP_ENABLE_M (GPIO_PIN18_WAKEUP_ENABLE_V << GPIO_PIN18_WAKEUP_ENABLE_S) #define GPIO_PIN18_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN18_WAKEUP_ENABLE_S 10 /** GPIO_PIN18_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN18_CONFIG 0x00000003U #define GPIO_PIN18_CONFIG_M (GPIO_PIN18_CONFIG_V << GPIO_PIN18_CONFIG_S) #define GPIO_PIN18_CONFIG_V 0x00000003U #define GPIO_PIN18_CONFIG_S 11 /** GPIO_PIN18_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN18_INT_ENA 0x0000001FU #define GPIO_PIN18_INT_ENA_M (GPIO_PIN18_INT_ENA_V << GPIO_PIN18_INT_ENA_S) #define GPIO_PIN18_INT_ENA_V 0x0000001FU #define GPIO_PIN18_INT_ENA_S 13 /** GPIO_PIN19_REG register * GPIO pin configuration register */ #define GPIO_PIN19_REG (DR_REG_GPIO_BASE + 0xc0) /** GPIO_PIN19_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN19_SYNC2_BYPASS 0x00000003U #define GPIO_PIN19_SYNC2_BYPASS_M (GPIO_PIN19_SYNC2_BYPASS_V << GPIO_PIN19_SYNC2_BYPASS_S) #define GPIO_PIN19_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN19_SYNC2_BYPASS_S 0 /** GPIO_PIN19_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN19_PAD_DRIVER (BIT(2)) #define GPIO_PIN19_PAD_DRIVER_M (GPIO_PIN19_PAD_DRIVER_V << GPIO_PIN19_PAD_DRIVER_S) #define GPIO_PIN19_PAD_DRIVER_V 0x00000001U #define GPIO_PIN19_PAD_DRIVER_S 2 /** GPIO_PIN19_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN19_SYNC1_BYPASS 0x00000003U #define GPIO_PIN19_SYNC1_BYPASS_M (GPIO_PIN19_SYNC1_BYPASS_V << GPIO_PIN19_SYNC1_BYPASS_S) #define GPIO_PIN19_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN19_SYNC1_BYPASS_S 3 /** GPIO_PIN19_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN19_INT_TYPE 0x00000007U #define GPIO_PIN19_INT_TYPE_M (GPIO_PIN19_INT_TYPE_V << GPIO_PIN19_INT_TYPE_S) #define GPIO_PIN19_INT_TYPE_V 0x00000007U #define GPIO_PIN19_INT_TYPE_S 7 /** GPIO_PIN19_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN19_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN19_WAKEUP_ENABLE_M (GPIO_PIN19_WAKEUP_ENABLE_V << GPIO_PIN19_WAKEUP_ENABLE_S) #define GPIO_PIN19_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN19_WAKEUP_ENABLE_S 10 /** GPIO_PIN19_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN19_CONFIG 0x00000003U #define GPIO_PIN19_CONFIG_M (GPIO_PIN19_CONFIG_V << GPIO_PIN19_CONFIG_S) #define GPIO_PIN19_CONFIG_V 0x00000003U #define GPIO_PIN19_CONFIG_S 11 /** GPIO_PIN19_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN19_INT_ENA 0x0000001FU #define GPIO_PIN19_INT_ENA_M (GPIO_PIN19_INT_ENA_V << GPIO_PIN19_INT_ENA_S) #define GPIO_PIN19_INT_ENA_V 0x0000001FU #define GPIO_PIN19_INT_ENA_S 13 /** GPIO_PIN20_REG register * GPIO pin configuration register */ #define GPIO_PIN20_REG (DR_REG_GPIO_BASE + 0xc4) /** GPIO_PIN20_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN20_SYNC2_BYPASS 0x00000003U #define GPIO_PIN20_SYNC2_BYPASS_M (GPIO_PIN20_SYNC2_BYPASS_V << GPIO_PIN20_SYNC2_BYPASS_S) #define GPIO_PIN20_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN20_SYNC2_BYPASS_S 0 /** GPIO_PIN20_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN20_PAD_DRIVER (BIT(2)) #define GPIO_PIN20_PAD_DRIVER_M (GPIO_PIN20_PAD_DRIVER_V << GPIO_PIN20_PAD_DRIVER_S) #define GPIO_PIN20_PAD_DRIVER_V 0x00000001U #define GPIO_PIN20_PAD_DRIVER_S 2 /** GPIO_PIN20_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN20_SYNC1_BYPASS 0x00000003U #define GPIO_PIN20_SYNC1_BYPASS_M (GPIO_PIN20_SYNC1_BYPASS_V << GPIO_PIN20_SYNC1_BYPASS_S) #define GPIO_PIN20_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN20_SYNC1_BYPASS_S 3 /** GPIO_PIN20_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN20_INT_TYPE 0x00000007U #define GPIO_PIN20_INT_TYPE_M (GPIO_PIN20_INT_TYPE_V << GPIO_PIN20_INT_TYPE_S) #define GPIO_PIN20_INT_TYPE_V 0x00000007U #define GPIO_PIN20_INT_TYPE_S 7 /** GPIO_PIN20_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN20_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN20_WAKEUP_ENABLE_M (GPIO_PIN20_WAKEUP_ENABLE_V << GPIO_PIN20_WAKEUP_ENABLE_S) #define GPIO_PIN20_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN20_WAKEUP_ENABLE_S 10 /** GPIO_PIN20_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN20_CONFIG 0x00000003U #define GPIO_PIN20_CONFIG_M (GPIO_PIN20_CONFIG_V << GPIO_PIN20_CONFIG_S) #define GPIO_PIN20_CONFIG_V 0x00000003U #define GPIO_PIN20_CONFIG_S 11 /** GPIO_PIN20_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN20_INT_ENA 0x0000001FU #define GPIO_PIN20_INT_ENA_M (GPIO_PIN20_INT_ENA_V << GPIO_PIN20_INT_ENA_S) #define GPIO_PIN20_INT_ENA_V 0x0000001FU #define GPIO_PIN20_INT_ENA_S 13 /** GPIO_PIN21_REG register * GPIO pin configuration register */ #define GPIO_PIN21_REG (DR_REG_GPIO_BASE + 0xc8) /** GPIO_PIN21_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN21_SYNC2_BYPASS 0x00000003U #define GPIO_PIN21_SYNC2_BYPASS_M (GPIO_PIN21_SYNC2_BYPASS_V << GPIO_PIN21_SYNC2_BYPASS_S) #define GPIO_PIN21_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN21_SYNC2_BYPASS_S 0 /** GPIO_PIN21_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN21_PAD_DRIVER (BIT(2)) #define GPIO_PIN21_PAD_DRIVER_M (GPIO_PIN21_PAD_DRIVER_V << GPIO_PIN21_PAD_DRIVER_S) #define GPIO_PIN21_PAD_DRIVER_V 0x00000001U #define GPIO_PIN21_PAD_DRIVER_S 2 /** GPIO_PIN21_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN21_SYNC1_BYPASS 0x00000003U #define GPIO_PIN21_SYNC1_BYPASS_M (GPIO_PIN21_SYNC1_BYPASS_V << GPIO_PIN21_SYNC1_BYPASS_S) #define GPIO_PIN21_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN21_SYNC1_BYPASS_S 3 /** GPIO_PIN21_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN21_INT_TYPE 0x00000007U #define GPIO_PIN21_INT_TYPE_M (GPIO_PIN21_INT_TYPE_V << GPIO_PIN21_INT_TYPE_S) #define GPIO_PIN21_INT_TYPE_V 0x00000007U #define GPIO_PIN21_INT_TYPE_S 7 /** GPIO_PIN21_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN21_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN21_WAKEUP_ENABLE_M (GPIO_PIN21_WAKEUP_ENABLE_V << GPIO_PIN21_WAKEUP_ENABLE_S) #define GPIO_PIN21_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN21_WAKEUP_ENABLE_S 10 /** GPIO_PIN21_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN21_CONFIG 0x00000003U #define GPIO_PIN21_CONFIG_M (GPIO_PIN21_CONFIG_V << GPIO_PIN21_CONFIG_S) #define GPIO_PIN21_CONFIG_V 0x00000003U #define GPIO_PIN21_CONFIG_S 11 /** GPIO_PIN21_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN21_INT_ENA 0x0000001FU #define GPIO_PIN21_INT_ENA_M (GPIO_PIN21_INT_ENA_V << GPIO_PIN21_INT_ENA_S) #define GPIO_PIN21_INT_ENA_V 0x0000001FU #define GPIO_PIN21_INT_ENA_S 13 /** GPIO_PIN22_REG register * GPIO pin configuration register */ #define GPIO_PIN22_REG (DR_REG_GPIO_BASE + 0xcc) /** GPIO_PIN22_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN22_SYNC2_BYPASS 0x00000003U #define GPIO_PIN22_SYNC2_BYPASS_M (GPIO_PIN22_SYNC2_BYPASS_V << GPIO_PIN22_SYNC2_BYPASS_S) #define GPIO_PIN22_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN22_SYNC2_BYPASS_S 0 /** GPIO_PIN22_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN22_PAD_DRIVER (BIT(2)) #define GPIO_PIN22_PAD_DRIVER_M (GPIO_PIN22_PAD_DRIVER_V << GPIO_PIN22_PAD_DRIVER_S) #define GPIO_PIN22_PAD_DRIVER_V 0x00000001U #define GPIO_PIN22_PAD_DRIVER_S 2 /** GPIO_PIN22_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN22_SYNC1_BYPASS 0x00000003U #define GPIO_PIN22_SYNC1_BYPASS_M (GPIO_PIN22_SYNC1_BYPASS_V << GPIO_PIN22_SYNC1_BYPASS_S) #define GPIO_PIN22_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN22_SYNC1_BYPASS_S 3 /** GPIO_PIN22_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN22_INT_TYPE 0x00000007U #define GPIO_PIN22_INT_TYPE_M (GPIO_PIN22_INT_TYPE_V << GPIO_PIN22_INT_TYPE_S) #define GPIO_PIN22_INT_TYPE_V 0x00000007U #define GPIO_PIN22_INT_TYPE_S 7 /** GPIO_PIN22_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN22_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN22_WAKEUP_ENABLE_M (GPIO_PIN22_WAKEUP_ENABLE_V << GPIO_PIN22_WAKEUP_ENABLE_S) #define GPIO_PIN22_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN22_WAKEUP_ENABLE_S 10 /** GPIO_PIN22_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN22_CONFIG 0x00000003U #define GPIO_PIN22_CONFIG_M (GPIO_PIN22_CONFIG_V << GPIO_PIN22_CONFIG_S) #define GPIO_PIN22_CONFIG_V 0x00000003U #define GPIO_PIN22_CONFIG_S 11 /** GPIO_PIN22_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN22_INT_ENA 0x0000001FU #define GPIO_PIN22_INT_ENA_M (GPIO_PIN22_INT_ENA_V << GPIO_PIN22_INT_ENA_S) #define GPIO_PIN22_INT_ENA_V 0x0000001FU #define GPIO_PIN22_INT_ENA_S 13 /** GPIO_PIN23_REG register * GPIO pin configuration register */ #define GPIO_PIN23_REG (DR_REG_GPIO_BASE + 0xd0) /** GPIO_PIN23_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN23_SYNC2_BYPASS 0x00000003U #define GPIO_PIN23_SYNC2_BYPASS_M (GPIO_PIN23_SYNC2_BYPASS_V << GPIO_PIN23_SYNC2_BYPASS_S) #define GPIO_PIN23_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN23_SYNC2_BYPASS_S 0 /** GPIO_PIN23_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN23_PAD_DRIVER (BIT(2)) #define GPIO_PIN23_PAD_DRIVER_M (GPIO_PIN23_PAD_DRIVER_V << GPIO_PIN23_PAD_DRIVER_S) #define GPIO_PIN23_PAD_DRIVER_V 0x00000001U #define GPIO_PIN23_PAD_DRIVER_S 2 /** GPIO_PIN23_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN23_SYNC1_BYPASS 0x00000003U #define GPIO_PIN23_SYNC1_BYPASS_M (GPIO_PIN23_SYNC1_BYPASS_V << GPIO_PIN23_SYNC1_BYPASS_S) #define GPIO_PIN23_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN23_SYNC1_BYPASS_S 3 /** GPIO_PIN23_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN23_INT_TYPE 0x00000007U #define GPIO_PIN23_INT_TYPE_M (GPIO_PIN23_INT_TYPE_V << GPIO_PIN23_INT_TYPE_S) #define GPIO_PIN23_INT_TYPE_V 0x00000007U #define GPIO_PIN23_INT_TYPE_S 7 /** GPIO_PIN23_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN23_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN23_WAKEUP_ENABLE_M (GPIO_PIN23_WAKEUP_ENABLE_V << GPIO_PIN23_WAKEUP_ENABLE_S) #define GPIO_PIN23_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN23_WAKEUP_ENABLE_S 10 /** GPIO_PIN23_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN23_CONFIG 0x00000003U #define GPIO_PIN23_CONFIG_M (GPIO_PIN23_CONFIG_V << GPIO_PIN23_CONFIG_S) #define GPIO_PIN23_CONFIG_V 0x00000003U #define GPIO_PIN23_CONFIG_S 11 /** GPIO_PIN23_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN23_INT_ENA 0x0000001FU #define GPIO_PIN23_INT_ENA_M (GPIO_PIN23_INT_ENA_V << GPIO_PIN23_INT_ENA_S) #define GPIO_PIN23_INT_ENA_V 0x0000001FU #define GPIO_PIN23_INT_ENA_S 13 /** GPIO_PIN24_REG register * GPIO pin configuration register */ #define GPIO_PIN24_REG (DR_REG_GPIO_BASE + 0xd4) /** GPIO_PIN24_SYNC2_BYPASS : R/W; bitpos: [1:0]; default: 0; * set GPIO input_sync2 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN24_SYNC2_BYPASS 0x00000003U #define GPIO_PIN24_SYNC2_BYPASS_M (GPIO_PIN24_SYNC2_BYPASS_V << GPIO_PIN24_SYNC2_BYPASS_S) #define GPIO_PIN24_SYNC2_BYPASS_V 0x00000003U #define GPIO_PIN24_SYNC2_BYPASS_S 0 /** GPIO_PIN24_PAD_DRIVER : R/W; bitpos: [2]; default: 0; * set this bit to select pad driver. 1:open-drain. 0:normal. */ #define GPIO_PIN24_PAD_DRIVER (BIT(2)) #define GPIO_PIN24_PAD_DRIVER_M (GPIO_PIN24_PAD_DRIVER_V << GPIO_PIN24_PAD_DRIVER_S) #define GPIO_PIN24_PAD_DRIVER_V 0x00000001U #define GPIO_PIN24_PAD_DRIVER_S 2 /** GPIO_PIN24_SYNC1_BYPASS : R/W; bitpos: [4:3]; default: 0; * set GPIO input_sync1 signal mode. 0:disable. 1:trigger at negedge. 2or3:trigger at * posedge. */ #define GPIO_PIN24_SYNC1_BYPASS 0x00000003U #define GPIO_PIN24_SYNC1_BYPASS_M (GPIO_PIN24_SYNC1_BYPASS_V << GPIO_PIN24_SYNC1_BYPASS_S) #define GPIO_PIN24_SYNC1_BYPASS_V 0x00000003U #define GPIO_PIN24_SYNC1_BYPASS_S 3 /** GPIO_PIN24_INT_TYPE : R/W; bitpos: [9:7]; default: 0; * set this value to choose interrupt mode. 0:disable GPIO interrupt. 1:trigger at * posedge. 2:trigger at negedge. 3:trigger at any edge. 4:valid at low level. 5:valid * at high level */ #define GPIO_PIN24_INT_TYPE 0x00000007U #define GPIO_PIN24_INT_TYPE_M (GPIO_PIN24_INT_TYPE_V << GPIO_PIN24_INT_TYPE_S) #define GPIO_PIN24_INT_TYPE_V 0x00000007U #define GPIO_PIN24_INT_TYPE_S 7 /** GPIO_PIN24_WAKEUP_ENABLE : R/W; bitpos: [10]; default: 0; * set this bit to enable GPIO wakeup.(can only wakeup CPU from Light-sleep Mode) */ #define GPIO_PIN24_WAKEUP_ENABLE (BIT(10)) #define GPIO_PIN24_WAKEUP_ENABLE_M (GPIO_PIN24_WAKEUP_ENABLE_V << GPIO_PIN24_WAKEUP_ENABLE_S) #define GPIO_PIN24_WAKEUP_ENABLE_V 0x00000001U #define GPIO_PIN24_WAKEUP_ENABLE_S 10 /** GPIO_PIN24_CONFIG : R/W; bitpos: [12:11]; default: 0; * reserved */ #define GPIO_PIN24_CONFIG 0x00000003U #define GPIO_PIN24_CONFIG_M (GPIO_PIN24_CONFIG_V << GPIO_PIN24_CONFIG_S) #define GPIO_PIN24_CONFIG_V 0x00000003U #define GPIO_PIN24_CONFIG_S 11 /** GPIO_PIN24_INT_ENA : R/W; bitpos: [17:13]; default: 0; * set bit 13 to enable CPU interrupt. set bit 14 to enable CPU(not shielded) * interrupt. */ #define GPIO_PIN24_INT_ENA 0x0000001FU #define GPIO_PIN24_INT_ENA_M (GPIO_PIN24_INT_ENA_V << GPIO_PIN24_INT_ENA_S) #define GPIO_PIN24_INT_ENA_V 0x0000001FU #define GPIO_PIN24_INT_ENA_S 13 /** GPIO_STATUS_NEXT_REG register * GPIO interrupt source register */ #define GPIO_STATUS_NEXT_REG (DR_REG_GPIO_BASE + 0x14c) /** GPIO_STATUS_INTERRUPT_NEXT : RO; bitpos: [25:0]; default: 0; * GPIO interrupt source register for GPIO0-24 */ #define GPIO_STATUS_INTERRUPT_NEXT 0x03FFFFFFU #define GPIO_STATUS_INTERRUPT_NEXT_M (GPIO_STATUS_INTERRUPT_NEXT_V << GPIO_STATUS_INTERRUPT_NEXT_S) #define GPIO_STATUS_INTERRUPT_NEXT_V 0x03FFFFFFU #define GPIO_STATUS_INTERRUPT_NEXT_S 0 /** GPIO_FUNC0_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC0_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x154) /** GPIO_FUNC0_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC0_IN_SEL 0x0000001FU #define GPIO_FUNC0_IN_SEL_M (GPIO_FUNC0_IN_SEL_V << GPIO_FUNC0_IN_SEL_S) #define GPIO_FUNC0_IN_SEL_V 0x0000001FU #define GPIO_FUNC0_IN_SEL_S 0 /** GPIO_FUNC0_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC0_IN_INV_SEL (BIT(5)) #define GPIO_FUNC0_IN_INV_SEL_M (GPIO_FUNC0_IN_INV_SEL_V << GPIO_FUNC0_IN_INV_SEL_S) #define GPIO_FUNC0_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC0_IN_INV_SEL_S 5 /** GPIO_SIG0_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG0_IN_SEL (BIT(6)) #define GPIO_SIG0_IN_SEL_M (GPIO_SIG0_IN_SEL_V << GPIO_SIG0_IN_SEL_S) #define GPIO_SIG0_IN_SEL_V 0x00000001U #define GPIO_SIG0_IN_SEL_S 6 /** GPIO_FUNC1_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC1_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x158) /** GPIO_FUNC1_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC1_IN_SEL 0x0000001FU #define GPIO_FUNC1_IN_SEL_M (GPIO_FUNC1_IN_SEL_V << GPIO_FUNC1_IN_SEL_S) #define GPIO_FUNC1_IN_SEL_V 0x0000001FU #define GPIO_FUNC1_IN_SEL_S 0 /** GPIO_FUNC1_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC1_IN_INV_SEL (BIT(5)) #define GPIO_FUNC1_IN_INV_SEL_M (GPIO_FUNC1_IN_INV_SEL_V << GPIO_FUNC1_IN_INV_SEL_S) #define GPIO_FUNC1_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC1_IN_INV_SEL_S 5 /** GPIO_SIG1_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG1_IN_SEL (BIT(6)) #define GPIO_SIG1_IN_SEL_M (GPIO_SIG1_IN_SEL_V << GPIO_SIG1_IN_SEL_S) #define GPIO_SIG1_IN_SEL_V 0x00000001U #define GPIO_SIG1_IN_SEL_S 6 /** GPIO_FUNC2_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC2_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x15c) /** GPIO_FUNC2_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC2_IN_SEL 0x0000001FU #define GPIO_FUNC2_IN_SEL_M (GPIO_FUNC2_IN_SEL_V << GPIO_FUNC2_IN_SEL_S) #define GPIO_FUNC2_IN_SEL_V 0x0000001FU #define GPIO_FUNC2_IN_SEL_S 0 /** GPIO_FUNC2_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC2_IN_INV_SEL (BIT(5)) #define GPIO_FUNC2_IN_INV_SEL_M (GPIO_FUNC2_IN_INV_SEL_V << GPIO_FUNC2_IN_INV_SEL_S) #define GPIO_FUNC2_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC2_IN_INV_SEL_S 5 /** GPIO_SIG2_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG2_IN_SEL (BIT(6)) #define GPIO_SIG2_IN_SEL_M (GPIO_SIG2_IN_SEL_V << GPIO_SIG2_IN_SEL_S) #define GPIO_SIG2_IN_SEL_V 0x00000001U #define GPIO_SIG2_IN_SEL_S 6 /** GPIO_FUNC3_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC3_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x160) /** GPIO_FUNC3_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC3_IN_SEL 0x0000001FU #define GPIO_FUNC3_IN_SEL_M (GPIO_FUNC3_IN_SEL_V << GPIO_FUNC3_IN_SEL_S) #define GPIO_FUNC3_IN_SEL_V 0x0000001FU #define GPIO_FUNC3_IN_SEL_S 0 /** GPIO_FUNC3_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC3_IN_INV_SEL (BIT(5)) #define GPIO_FUNC3_IN_INV_SEL_M (GPIO_FUNC3_IN_INV_SEL_V << GPIO_FUNC3_IN_INV_SEL_S) #define GPIO_FUNC3_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC3_IN_INV_SEL_S 5 /** GPIO_SIG3_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG3_IN_SEL (BIT(6)) #define GPIO_SIG3_IN_SEL_M (GPIO_SIG3_IN_SEL_V << GPIO_SIG3_IN_SEL_S) #define GPIO_SIG3_IN_SEL_V 0x00000001U #define GPIO_SIG3_IN_SEL_S 6 /** GPIO_FUNC4_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC4_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x164) /** GPIO_FUNC4_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC4_IN_SEL 0x0000001FU #define GPIO_FUNC4_IN_SEL_M (GPIO_FUNC4_IN_SEL_V << GPIO_FUNC4_IN_SEL_S) #define GPIO_FUNC4_IN_SEL_V 0x0000001FU #define GPIO_FUNC4_IN_SEL_S 0 /** GPIO_FUNC4_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC4_IN_INV_SEL (BIT(5)) #define GPIO_FUNC4_IN_INV_SEL_M (GPIO_FUNC4_IN_INV_SEL_V << GPIO_FUNC4_IN_INV_SEL_S) #define GPIO_FUNC4_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC4_IN_INV_SEL_S 5 /** GPIO_SIG4_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG4_IN_SEL (BIT(6)) #define GPIO_SIG4_IN_SEL_M (GPIO_SIG4_IN_SEL_V << GPIO_SIG4_IN_SEL_S) #define GPIO_SIG4_IN_SEL_V 0x00000001U #define GPIO_SIG4_IN_SEL_S 6 /** GPIO_FUNC5_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC5_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x168) /** GPIO_FUNC5_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC5_IN_SEL 0x0000001FU #define GPIO_FUNC5_IN_SEL_M (GPIO_FUNC5_IN_SEL_V << GPIO_FUNC5_IN_SEL_S) #define GPIO_FUNC5_IN_SEL_V 0x0000001FU #define GPIO_FUNC5_IN_SEL_S 0 /** GPIO_FUNC5_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC5_IN_INV_SEL (BIT(5)) #define GPIO_FUNC5_IN_INV_SEL_M (GPIO_FUNC5_IN_INV_SEL_V << GPIO_FUNC5_IN_INV_SEL_S) #define GPIO_FUNC5_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC5_IN_INV_SEL_S 5 /** GPIO_SIG5_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG5_IN_SEL (BIT(6)) #define GPIO_SIG5_IN_SEL_M (GPIO_SIG5_IN_SEL_V << GPIO_SIG5_IN_SEL_S) #define GPIO_SIG5_IN_SEL_V 0x00000001U #define GPIO_SIG5_IN_SEL_S 6 /** GPIO_FUNC6_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC6_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x16c) /** GPIO_FUNC6_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC6_IN_SEL 0x0000001FU #define GPIO_FUNC6_IN_SEL_M (GPIO_FUNC6_IN_SEL_V << GPIO_FUNC6_IN_SEL_S) #define GPIO_FUNC6_IN_SEL_V 0x0000001FU #define GPIO_FUNC6_IN_SEL_S 0 /** GPIO_FUNC6_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC6_IN_INV_SEL (BIT(5)) #define GPIO_FUNC6_IN_INV_SEL_M (GPIO_FUNC6_IN_INV_SEL_V << GPIO_FUNC6_IN_INV_SEL_S) #define GPIO_FUNC6_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC6_IN_INV_SEL_S 5 /** GPIO_SIG6_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG6_IN_SEL (BIT(6)) #define GPIO_SIG6_IN_SEL_M (GPIO_SIG6_IN_SEL_V << GPIO_SIG6_IN_SEL_S) #define GPIO_SIG6_IN_SEL_V 0x00000001U #define GPIO_SIG6_IN_SEL_S 6 /** GPIO_FUNC7_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC7_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x170) /** GPIO_FUNC7_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC7_IN_SEL 0x0000001FU #define GPIO_FUNC7_IN_SEL_M (GPIO_FUNC7_IN_SEL_V << GPIO_FUNC7_IN_SEL_S) #define GPIO_FUNC7_IN_SEL_V 0x0000001FU #define GPIO_FUNC7_IN_SEL_S 0 /** GPIO_FUNC7_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC7_IN_INV_SEL (BIT(5)) #define GPIO_FUNC7_IN_INV_SEL_M (GPIO_FUNC7_IN_INV_SEL_V << GPIO_FUNC7_IN_INV_SEL_S) #define GPIO_FUNC7_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC7_IN_INV_SEL_S 5 /** GPIO_SIG7_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG7_IN_SEL (BIT(6)) #define GPIO_SIG7_IN_SEL_M (GPIO_SIG7_IN_SEL_V << GPIO_SIG7_IN_SEL_S) #define GPIO_SIG7_IN_SEL_V 0x00000001U #define GPIO_SIG7_IN_SEL_S 6 /** GPIO_FUNC8_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC8_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x174) /** GPIO_FUNC8_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC8_IN_SEL 0x0000001FU #define GPIO_FUNC8_IN_SEL_M (GPIO_FUNC8_IN_SEL_V << GPIO_FUNC8_IN_SEL_S) #define GPIO_FUNC8_IN_SEL_V 0x0000001FU #define GPIO_FUNC8_IN_SEL_S 0 /** GPIO_FUNC8_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC8_IN_INV_SEL (BIT(5)) #define GPIO_FUNC8_IN_INV_SEL_M (GPIO_FUNC8_IN_INV_SEL_V << GPIO_FUNC8_IN_INV_SEL_S) #define GPIO_FUNC8_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC8_IN_INV_SEL_S 5 /** GPIO_SIG8_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG8_IN_SEL (BIT(6)) #define GPIO_SIG8_IN_SEL_M (GPIO_SIG8_IN_SEL_V << GPIO_SIG8_IN_SEL_S) #define GPIO_SIG8_IN_SEL_V 0x00000001U #define GPIO_SIG8_IN_SEL_S 6 /** GPIO_FUNC9_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC9_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x178) /** GPIO_FUNC9_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC9_IN_SEL 0x0000001FU #define GPIO_FUNC9_IN_SEL_M (GPIO_FUNC9_IN_SEL_V << GPIO_FUNC9_IN_SEL_S) #define GPIO_FUNC9_IN_SEL_V 0x0000001FU #define GPIO_FUNC9_IN_SEL_S 0 /** GPIO_FUNC9_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC9_IN_INV_SEL (BIT(5)) #define GPIO_FUNC9_IN_INV_SEL_M (GPIO_FUNC9_IN_INV_SEL_V << GPIO_FUNC9_IN_INV_SEL_S) #define GPIO_FUNC9_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC9_IN_INV_SEL_S 5 /** GPIO_SIG9_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG9_IN_SEL (BIT(6)) #define GPIO_SIG9_IN_SEL_M (GPIO_SIG9_IN_SEL_V << GPIO_SIG9_IN_SEL_S) #define GPIO_SIG9_IN_SEL_V 0x00000001U #define GPIO_SIG9_IN_SEL_S 6 /** GPIO_FUNC10_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC10_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x17c) /** GPIO_FUNC10_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC10_IN_SEL 0x0000001FU #define GPIO_FUNC10_IN_SEL_M (GPIO_FUNC10_IN_SEL_V << GPIO_FUNC10_IN_SEL_S) #define GPIO_FUNC10_IN_SEL_V 0x0000001FU #define GPIO_FUNC10_IN_SEL_S 0 /** GPIO_FUNC10_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC10_IN_INV_SEL (BIT(5)) #define GPIO_FUNC10_IN_INV_SEL_M (GPIO_FUNC10_IN_INV_SEL_V << GPIO_FUNC10_IN_INV_SEL_S) #define GPIO_FUNC10_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC10_IN_INV_SEL_S 5 /** GPIO_SIG10_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG10_IN_SEL (BIT(6)) #define GPIO_SIG10_IN_SEL_M (GPIO_SIG10_IN_SEL_V << GPIO_SIG10_IN_SEL_S) #define GPIO_SIG10_IN_SEL_V 0x00000001U #define GPIO_SIG10_IN_SEL_S 6 /** GPIO_FUNC11_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC11_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x180) /** GPIO_FUNC11_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC11_IN_SEL 0x0000001FU #define GPIO_FUNC11_IN_SEL_M (GPIO_FUNC11_IN_SEL_V << GPIO_FUNC11_IN_SEL_S) #define GPIO_FUNC11_IN_SEL_V 0x0000001FU #define GPIO_FUNC11_IN_SEL_S 0 /** GPIO_FUNC11_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC11_IN_INV_SEL (BIT(5)) #define GPIO_FUNC11_IN_INV_SEL_M (GPIO_FUNC11_IN_INV_SEL_V << GPIO_FUNC11_IN_INV_SEL_S) #define GPIO_FUNC11_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC11_IN_INV_SEL_S 5 /** GPIO_SIG11_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG11_IN_SEL (BIT(6)) #define GPIO_SIG11_IN_SEL_M (GPIO_SIG11_IN_SEL_V << GPIO_SIG11_IN_SEL_S) #define GPIO_SIG11_IN_SEL_V 0x00000001U #define GPIO_SIG11_IN_SEL_S 6 /** GPIO_FUNC12_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC12_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x184) /** GPIO_FUNC12_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC12_IN_SEL 0x0000001FU #define GPIO_FUNC12_IN_SEL_M (GPIO_FUNC12_IN_SEL_V << GPIO_FUNC12_IN_SEL_S) #define GPIO_FUNC12_IN_SEL_V 0x0000001FU #define GPIO_FUNC12_IN_SEL_S 0 /** GPIO_FUNC12_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC12_IN_INV_SEL (BIT(5)) #define GPIO_FUNC12_IN_INV_SEL_M (GPIO_FUNC12_IN_INV_SEL_V << GPIO_FUNC12_IN_INV_SEL_S) #define GPIO_FUNC12_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC12_IN_INV_SEL_S 5 /** GPIO_SIG12_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG12_IN_SEL (BIT(6)) #define GPIO_SIG12_IN_SEL_M (GPIO_SIG12_IN_SEL_V << GPIO_SIG12_IN_SEL_S) #define GPIO_SIG12_IN_SEL_V 0x00000001U #define GPIO_SIG12_IN_SEL_S 6 /** GPIO_FUNC13_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC13_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x188) /** GPIO_FUNC13_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC13_IN_SEL 0x0000001FU #define GPIO_FUNC13_IN_SEL_M (GPIO_FUNC13_IN_SEL_V << GPIO_FUNC13_IN_SEL_S) #define GPIO_FUNC13_IN_SEL_V 0x0000001FU #define GPIO_FUNC13_IN_SEL_S 0 /** GPIO_FUNC13_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC13_IN_INV_SEL (BIT(5)) #define GPIO_FUNC13_IN_INV_SEL_M (GPIO_FUNC13_IN_INV_SEL_V << GPIO_FUNC13_IN_INV_SEL_S) #define GPIO_FUNC13_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC13_IN_INV_SEL_S 5 /** GPIO_SIG13_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG13_IN_SEL (BIT(6)) #define GPIO_SIG13_IN_SEL_M (GPIO_SIG13_IN_SEL_V << GPIO_SIG13_IN_SEL_S) #define GPIO_SIG13_IN_SEL_V 0x00000001U #define GPIO_SIG13_IN_SEL_S 6 /** GPIO_FUNC14_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC14_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x18c) /** GPIO_FUNC14_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC14_IN_SEL 0x0000001FU #define GPIO_FUNC14_IN_SEL_M (GPIO_FUNC14_IN_SEL_V << GPIO_FUNC14_IN_SEL_S) #define GPIO_FUNC14_IN_SEL_V 0x0000001FU #define GPIO_FUNC14_IN_SEL_S 0 /** GPIO_FUNC14_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC14_IN_INV_SEL (BIT(5)) #define GPIO_FUNC14_IN_INV_SEL_M (GPIO_FUNC14_IN_INV_SEL_V << GPIO_FUNC14_IN_INV_SEL_S) #define GPIO_FUNC14_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC14_IN_INV_SEL_S 5 /** GPIO_SIG14_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG14_IN_SEL (BIT(6)) #define GPIO_SIG14_IN_SEL_M (GPIO_SIG14_IN_SEL_V << GPIO_SIG14_IN_SEL_S) #define GPIO_SIG14_IN_SEL_V 0x00000001U #define GPIO_SIG14_IN_SEL_S 6 /** GPIO_FUNC15_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC15_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x190) /** GPIO_FUNC15_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC15_IN_SEL 0x0000001FU #define GPIO_FUNC15_IN_SEL_M (GPIO_FUNC15_IN_SEL_V << GPIO_FUNC15_IN_SEL_S) #define GPIO_FUNC15_IN_SEL_V 0x0000001FU #define GPIO_FUNC15_IN_SEL_S 0 /** GPIO_FUNC15_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC15_IN_INV_SEL (BIT(5)) #define GPIO_FUNC15_IN_INV_SEL_M (GPIO_FUNC15_IN_INV_SEL_V << GPIO_FUNC15_IN_INV_SEL_S) #define GPIO_FUNC15_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC15_IN_INV_SEL_S 5 /** GPIO_SIG15_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG15_IN_SEL (BIT(6)) #define GPIO_SIG15_IN_SEL_M (GPIO_SIG15_IN_SEL_V << GPIO_SIG15_IN_SEL_S) #define GPIO_SIG15_IN_SEL_V 0x00000001U #define GPIO_SIG15_IN_SEL_S 6 /** GPIO_FUNC16_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC16_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x194) /** GPIO_FUNC16_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC16_IN_SEL 0x0000001FU #define GPIO_FUNC16_IN_SEL_M (GPIO_FUNC16_IN_SEL_V << GPIO_FUNC16_IN_SEL_S) #define GPIO_FUNC16_IN_SEL_V 0x0000001FU #define GPIO_FUNC16_IN_SEL_S 0 /** GPIO_FUNC16_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC16_IN_INV_SEL (BIT(5)) #define GPIO_FUNC16_IN_INV_SEL_M (GPIO_FUNC16_IN_INV_SEL_V << GPIO_FUNC16_IN_INV_SEL_S) #define GPIO_FUNC16_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC16_IN_INV_SEL_S 5 /** GPIO_SIG16_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG16_IN_SEL (BIT(6)) #define GPIO_SIG16_IN_SEL_M (GPIO_SIG16_IN_SEL_V << GPIO_SIG16_IN_SEL_S) #define GPIO_SIG16_IN_SEL_V 0x00000001U #define GPIO_SIG16_IN_SEL_S 6 /** GPIO_FUNC17_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC17_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x198) /** GPIO_FUNC17_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC17_IN_SEL 0x0000001FU #define GPIO_FUNC17_IN_SEL_M (GPIO_FUNC17_IN_SEL_V << GPIO_FUNC17_IN_SEL_S) #define GPIO_FUNC17_IN_SEL_V 0x0000001FU #define GPIO_FUNC17_IN_SEL_S 0 /** GPIO_FUNC17_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC17_IN_INV_SEL (BIT(5)) #define GPIO_FUNC17_IN_INV_SEL_M (GPIO_FUNC17_IN_INV_SEL_V << GPIO_FUNC17_IN_INV_SEL_S) #define GPIO_FUNC17_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC17_IN_INV_SEL_S 5 /** GPIO_SIG17_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG17_IN_SEL (BIT(6)) #define GPIO_SIG17_IN_SEL_M (GPIO_SIG17_IN_SEL_V << GPIO_SIG17_IN_SEL_S) #define GPIO_SIG17_IN_SEL_V 0x00000001U #define GPIO_SIG17_IN_SEL_S 6 /** GPIO_FUNC18_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC18_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x19c) /** GPIO_FUNC18_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC18_IN_SEL 0x0000001FU #define GPIO_FUNC18_IN_SEL_M (GPIO_FUNC18_IN_SEL_V << GPIO_FUNC18_IN_SEL_S) #define GPIO_FUNC18_IN_SEL_V 0x0000001FU #define GPIO_FUNC18_IN_SEL_S 0 /** GPIO_FUNC18_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC18_IN_INV_SEL (BIT(5)) #define GPIO_FUNC18_IN_INV_SEL_M (GPIO_FUNC18_IN_INV_SEL_V << GPIO_FUNC18_IN_INV_SEL_S) #define GPIO_FUNC18_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC18_IN_INV_SEL_S 5 /** GPIO_SIG18_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG18_IN_SEL (BIT(6)) #define GPIO_SIG18_IN_SEL_M (GPIO_SIG18_IN_SEL_V << GPIO_SIG18_IN_SEL_S) #define GPIO_SIG18_IN_SEL_V 0x00000001U #define GPIO_SIG18_IN_SEL_S 6 /** GPIO_FUNC19_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC19_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1a0) /** GPIO_FUNC19_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC19_IN_SEL 0x0000001FU #define GPIO_FUNC19_IN_SEL_M (GPIO_FUNC19_IN_SEL_V << GPIO_FUNC19_IN_SEL_S) #define GPIO_FUNC19_IN_SEL_V 0x0000001FU #define GPIO_FUNC19_IN_SEL_S 0 /** GPIO_FUNC19_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC19_IN_INV_SEL (BIT(5)) #define GPIO_FUNC19_IN_INV_SEL_M (GPIO_FUNC19_IN_INV_SEL_V << GPIO_FUNC19_IN_INV_SEL_S) #define GPIO_FUNC19_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC19_IN_INV_SEL_S 5 /** GPIO_SIG19_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG19_IN_SEL (BIT(6)) #define GPIO_SIG19_IN_SEL_M (GPIO_SIG19_IN_SEL_V << GPIO_SIG19_IN_SEL_S) #define GPIO_SIG19_IN_SEL_V 0x00000001U #define GPIO_SIG19_IN_SEL_S 6 /** GPIO_FUNC20_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC20_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1a4) /** GPIO_FUNC20_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC20_IN_SEL 0x0000001FU #define GPIO_FUNC20_IN_SEL_M (GPIO_FUNC20_IN_SEL_V << GPIO_FUNC20_IN_SEL_S) #define GPIO_FUNC20_IN_SEL_V 0x0000001FU #define GPIO_FUNC20_IN_SEL_S 0 /** GPIO_FUNC20_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC20_IN_INV_SEL (BIT(5)) #define GPIO_FUNC20_IN_INV_SEL_M (GPIO_FUNC20_IN_INV_SEL_V << GPIO_FUNC20_IN_INV_SEL_S) #define GPIO_FUNC20_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC20_IN_INV_SEL_S 5 /** GPIO_SIG20_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG20_IN_SEL (BIT(6)) #define GPIO_SIG20_IN_SEL_M (GPIO_SIG20_IN_SEL_V << GPIO_SIG20_IN_SEL_S) #define GPIO_SIG20_IN_SEL_V 0x00000001U #define GPIO_SIG20_IN_SEL_S 6 /** GPIO_FUNC21_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC21_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1a8) /** GPIO_FUNC21_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC21_IN_SEL 0x0000001FU #define GPIO_FUNC21_IN_SEL_M (GPIO_FUNC21_IN_SEL_V << GPIO_FUNC21_IN_SEL_S) #define GPIO_FUNC21_IN_SEL_V 0x0000001FU #define GPIO_FUNC21_IN_SEL_S 0 /** GPIO_FUNC21_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC21_IN_INV_SEL (BIT(5)) #define GPIO_FUNC21_IN_INV_SEL_M (GPIO_FUNC21_IN_INV_SEL_V << GPIO_FUNC21_IN_INV_SEL_S) #define GPIO_FUNC21_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC21_IN_INV_SEL_S 5 /** GPIO_SIG21_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG21_IN_SEL (BIT(6)) #define GPIO_SIG21_IN_SEL_M (GPIO_SIG21_IN_SEL_V << GPIO_SIG21_IN_SEL_S) #define GPIO_SIG21_IN_SEL_V 0x00000001U #define GPIO_SIG21_IN_SEL_S 6 /** GPIO_FUNC22_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC22_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1ac) /** GPIO_FUNC22_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC22_IN_SEL 0x0000001FU #define GPIO_FUNC22_IN_SEL_M (GPIO_FUNC22_IN_SEL_V << GPIO_FUNC22_IN_SEL_S) #define GPIO_FUNC22_IN_SEL_V 0x0000001FU #define GPIO_FUNC22_IN_SEL_S 0 /** GPIO_FUNC22_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC22_IN_INV_SEL (BIT(5)) #define GPIO_FUNC22_IN_INV_SEL_M (GPIO_FUNC22_IN_INV_SEL_V << GPIO_FUNC22_IN_INV_SEL_S) #define GPIO_FUNC22_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC22_IN_INV_SEL_S 5 /** GPIO_SIG22_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG22_IN_SEL (BIT(6)) #define GPIO_SIG22_IN_SEL_M (GPIO_SIG22_IN_SEL_V << GPIO_SIG22_IN_SEL_S) #define GPIO_SIG22_IN_SEL_V 0x00000001U #define GPIO_SIG22_IN_SEL_S 6 /** GPIO_FUNC23_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC23_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1b0) /** GPIO_FUNC23_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC23_IN_SEL 0x0000001FU #define GPIO_FUNC23_IN_SEL_M (GPIO_FUNC23_IN_SEL_V << GPIO_FUNC23_IN_SEL_S) #define GPIO_FUNC23_IN_SEL_V 0x0000001FU #define GPIO_FUNC23_IN_SEL_S 0 /** GPIO_FUNC23_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC23_IN_INV_SEL (BIT(5)) #define GPIO_FUNC23_IN_INV_SEL_M (GPIO_FUNC23_IN_INV_SEL_V << GPIO_FUNC23_IN_INV_SEL_S) #define GPIO_FUNC23_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC23_IN_INV_SEL_S 5 /** GPIO_SIG23_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG23_IN_SEL (BIT(6)) #define GPIO_SIG23_IN_SEL_M (GPIO_SIG23_IN_SEL_V << GPIO_SIG23_IN_SEL_S) #define GPIO_SIG23_IN_SEL_V 0x00000001U #define GPIO_SIG23_IN_SEL_S 6 /** GPIO_FUNC24_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC24_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1b4) /** GPIO_FUNC24_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC24_IN_SEL 0x0000001FU #define GPIO_FUNC24_IN_SEL_M (GPIO_FUNC24_IN_SEL_V << GPIO_FUNC24_IN_SEL_S) #define GPIO_FUNC24_IN_SEL_V 0x0000001FU #define GPIO_FUNC24_IN_SEL_S 0 /** GPIO_FUNC24_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC24_IN_INV_SEL (BIT(5)) #define GPIO_FUNC24_IN_INV_SEL_M (GPIO_FUNC24_IN_INV_SEL_V << GPIO_FUNC24_IN_INV_SEL_S) #define GPIO_FUNC24_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC24_IN_INV_SEL_S 5 /** GPIO_SIG24_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG24_IN_SEL (BIT(6)) #define GPIO_SIG24_IN_SEL_M (GPIO_SIG24_IN_SEL_V << GPIO_SIG24_IN_SEL_S) #define GPIO_SIG24_IN_SEL_V 0x00000001U #define GPIO_SIG24_IN_SEL_S 6 /** GPIO_FUNC25_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC25_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1b8) /** GPIO_FUNC25_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC25_IN_SEL 0x0000001FU #define GPIO_FUNC25_IN_SEL_M (GPIO_FUNC25_IN_SEL_V << GPIO_FUNC25_IN_SEL_S) #define GPIO_FUNC25_IN_SEL_V 0x0000001FU #define GPIO_FUNC25_IN_SEL_S 0 /** GPIO_FUNC25_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC25_IN_INV_SEL (BIT(5)) #define GPIO_FUNC25_IN_INV_SEL_M (GPIO_FUNC25_IN_INV_SEL_V << GPIO_FUNC25_IN_INV_SEL_S) #define GPIO_FUNC25_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC25_IN_INV_SEL_S 5 /** GPIO_SIG25_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG25_IN_SEL (BIT(6)) #define GPIO_SIG25_IN_SEL_M (GPIO_SIG25_IN_SEL_V << GPIO_SIG25_IN_SEL_S) #define GPIO_SIG25_IN_SEL_V 0x00000001U #define GPIO_SIG25_IN_SEL_S 6 /** GPIO_FUNC26_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC26_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1bc) /** GPIO_FUNC26_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC26_IN_SEL 0x0000001FU #define GPIO_FUNC26_IN_SEL_M (GPIO_FUNC26_IN_SEL_V << GPIO_FUNC26_IN_SEL_S) #define GPIO_FUNC26_IN_SEL_V 0x0000001FU #define GPIO_FUNC26_IN_SEL_S 0 /** GPIO_FUNC26_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC26_IN_INV_SEL (BIT(5)) #define GPIO_FUNC26_IN_INV_SEL_M (GPIO_FUNC26_IN_INV_SEL_V << GPIO_FUNC26_IN_INV_SEL_S) #define GPIO_FUNC26_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC26_IN_INV_SEL_S 5 /** GPIO_SIG26_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG26_IN_SEL (BIT(6)) #define GPIO_SIG26_IN_SEL_M (GPIO_SIG26_IN_SEL_V << GPIO_SIG26_IN_SEL_S) #define GPIO_SIG26_IN_SEL_V 0x00000001U #define GPIO_SIG26_IN_SEL_S 6 /** GPIO_FUNC27_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC27_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1c0) /** GPIO_FUNC27_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC27_IN_SEL 0x0000001FU #define GPIO_FUNC27_IN_SEL_M (GPIO_FUNC27_IN_SEL_V << GPIO_FUNC27_IN_SEL_S) #define GPIO_FUNC27_IN_SEL_V 0x0000001FU #define GPIO_FUNC27_IN_SEL_S 0 /** GPIO_FUNC27_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC27_IN_INV_SEL (BIT(5)) #define GPIO_FUNC27_IN_INV_SEL_M (GPIO_FUNC27_IN_INV_SEL_V << GPIO_FUNC27_IN_INV_SEL_S) #define GPIO_FUNC27_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC27_IN_INV_SEL_S 5 /** GPIO_SIG27_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG27_IN_SEL (BIT(6)) #define GPIO_SIG27_IN_SEL_M (GPIO_SIG27_IN_SEL_V << GPIO_SIG27_IN_SEL_S) #define GPIO_SIG27_IN_SEL_V 0x00000001U #define GPIO_SIG27_IN_SEL_S 6 /** GPIO_FUNC28_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC28_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1c4) /** GPIO_FUNC28_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC28_IN_SEL 0x0000001FU #define GPIO_FUNC28_IN_SEL_M (GPIO_FUNC28_IN_SEL_V << GPIO_FUNC28_IN_SEL_S) #define GPIO_FUNC28_IN_SEL_V 0x0000001FU #define GPIO_FUNC28_IN_SEL_S 0 /** GPIO_FUNC28_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC28_IN_INV_SEL (BIT(5)) #define GPIO_FUNC28_IN_INV_SEL_M (GPIO_FUNC28_IN_INV_SEL_V << GPIO_FUNC28_IN_INV_SEL_S) #define GPIO_FUNC28_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC28_IN_INV_SEL_S 5 /** GPIO_SIG28_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG28_IN_SEL (BIT(6)) #define GPIO_SIG28_IN_SEL_M (GPIO_SIG28_IN_SEL_V << GPIO_SIG28_IN_SEL_S) #define GPIO_SIG28_IN_SEL_V 0x00000001U #define GPIO_SIG28_IN_SEL_S 6 /** GPIO_FUNC29_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC29_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1c8) /** GPIO_FUNC29_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC29_IN_SEL 0x0000001FU #define GPIO_FUNC29_IN_SEL_M (GPIO_FUNC29_IN_SEL_V << GPIO_FUNC29_IN_SEL_S) #define GPIO_FUNC29_IN_SEL_V 0x0000001FU #define GPIO_FUNC29_IN_SEL_S 0 /** GPIO_FUNC29_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC29_IN_INV_SEL (BIT(5)) #define GPIO_FUNC29_IN_INV_SEL_M (GPIO_FUNC29_IN_INV_SEL_V << GPIO_FUNC29_IN_INV_SEL_S) #define GPIO_FUNC29_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC29_IN_INV_SEL_S 5 /** GPIO_SIG29_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG29_IN_SEL (BIT(6)) #define GPIO_SIG29_IN_SEL_M (GPIO_SIG29_IN_SEL_V << GPIO_SIG29_IN_SEL_S) #define GPIO_SIG29_IN_SEL_V 0x00000001U #define GPIO_SIG29_IN_SEL_S 6 /** GPIO_FUNC30_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC30_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1cc) /** GPIO_FUNC30_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC30_IN_SEL 0x0000001FU #define GPIO_FUNC30_IN_SEL_M (GPIO_FUNC30_IN_SEL_V << GPIO_FUNC30_IN_SEL_S) #define GPIO_FUNC30_IN_SEL_V 0x0000001FU #define GPIO_FUNC30_IN_SEL_S 0 /** GPIO_FUNC30_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC30_IN_INV_SEL (BIT(5)) #define GPIO_FUNC30_IN_INV_SEL_M (GPIO_FUNC30_IN_INV_SEL_V << GPIO_FUNC30_IN_INV_SEL_S) #define GPIO_FUNC30_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC30_IN_INV_SEL_S 5 /** GPIO_SIG30_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG30_IN_SEL (BIT(6)) #define GPIO_SIG30_IN_SEL_M (GPIO_SIG30_IN_SEL_V << GPIO_SIG30_IN_SEL_S) #define GPIO_SIG30_IN_SEL_V 0x00000001U #define GPIO_SIG30_IN_SEL_S 6 /** GPIO_FUNC31_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC31_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1d0) /** GPIO_FUNC31_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC31_IN_SEL 0x0000001FU #define GPIO_FUNC31_IN_SEL_M (GPIO_FUNC31_IN_SEL_V << GPIO_FUNC31_IN_SEL_S) #define GPIO_FUNC31_IN_SEL_V 0x0000001FU #define GPIO_FUNC31_IN_SEL_S 0 /** GPIO_FUNC31_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC31_IN_INV_SEL (BIT(5)) #define GPIO_FUNC31_IN_INV_SEL_M (GPIO_FUNC31_IN_INV_SEL_V << GPIO_FUNC31_IN_INV_SEL_S) #define GPIO_FUNC31_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC31_IN_INV_SEL_S 5 /** GPIO_SIG31_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG31_IN_SEL (BIT(6)) #define GPIO_SIG31_IN_SEL_M (GPIO_SIG31_IN_SEL_V << GPIO_SIG31_IN_SEL_S) #define GPIO_SIG31_IN_SEL_V 0x00000001U #define GPIO_SIG31_IN_SEL_S 6 /** GPIO_FUNC32_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC32_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1d4) /** GPIO_FUNC32_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC32_IN_SEL 0x0000001FU #define GPIO_FUNC32_IN_SEL_M (GPIO_FUNC32_IN_SEL_V << GPIO_FUNC32_IN_SEL_S) #define GPIO_FUNC32_IN_SEL_V 0x0000001FU #define GPIO_FUNC32_IN_SEL_S 0 /** GPIO_FUNC32_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC32_IN_INV_SEL (BIT(5)) #define GPIO_FUNC32_IN_INV_SEL_M (GPIO_FUNC32_IN_INV_SEL_V << GPIO_FUNC32_IN_INV_SEL_S) #define GPIO_FUNC32_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC32_IN_INV_SEL_S 5 /** GPIO_SIG32_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG32_IN_SEL (BIT(6)) #define GPIO_SIG32_IN_SEL_M (GPIO_SIG32_IN_SEL_V << GPIO_SIG32_IN_SEL_S) #define GPIO_SIG32_IN_SEL_V 0x00000001U #define GPIO_SIG32_IN_SEL_S 6 /** GPIO_FUNC33_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC33_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1d8) /** GPIO_FUNC33_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC33_IN_SEL 0x0000001FU #define GPIO_FUNC33_IN_SEL_M (GPIO_FUNC33_IN_SEL_V << GPIO_FUNC33_IN_SEL_S) #define GPIO_FUNC33_IN_SEL_V 0x0000001FU #define GPIO_FUNC33_IN_SEL_S 0 /** GPIO_FUNC33_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC33_IN_INV_SEL (BIT(5)) #define GPIO_FUNC33_IN_INV_SEL_M (GPIO_FUNC33_IN_INV_SEL_V << GPIO_FUNC33_IN_INV_SEL_S) #define GPIO_FUNC33_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC33_IN_INV_SEL_S 5 /** GPIO_SIG33_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG33_IN_SEL (BIT(6)) #define GPIO_SIG33_IN_SEL_M (GPIO_SIG33_IN_SEL_V << GPIO_SIG33_IN_SEL_S) #define GPIO_SIG33_IN_SEL_V 0x00000001U #define GPIO_SIG33_IN_SEL_S 6 /** GPIO_FUNC34_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC34_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1dc) /** GPIO_FUNC34_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC34_IN_SEL 0x0000001FU #define GPIO_FUNC34_IN_SEL_M (GPIO_FUNC34_IN_SEL_V << GPIO_FUNC34_IN_SEL_S) #define GPIO_FUNC34_IN_SEL_V 0x0000001FU #define GPIO_FUNC34_IN_SEL_S 0 /** GPIO_FUNC34_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC34_IN_INV_SEL (BIT(5)) #define GPIO_FUNC34_IN_INV_SEL_M (GPIO_FUNC34_IN_INV_SEL_V << GPIO_FUNC34_IN_INV_SEL_S) #define GPIO_FUNC34_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC34_IN_INV_SEL_S 5 /** GPIO_SIG34_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG34_IN_SEL (BIT(6)) #define GPIO_SIG34_IN_SEL_M (GPIO_SIG34_IN_SEL_V << GPIO_SIG34_IN_SEL_S) #define GPIO_SIG34_IN_SEL_V 0x00000001U #define GPIO_SIG34_IN_SEL_S 6 /** GPIO_FUNC35_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC35_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1e0) /** GPIO_FUNC35_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC35_IN_SEL 0x0000001FU #define GPIO_FUNC35_IN_SEL_M (GPIO_FUNC35_IN_SEL_V << GPIO_FUNC35_IN_SEL_S) #define GPIO_FUNC35_IN_SEL_V 0x0000001FU #define GPIO_FUNC35_IN_SEL_S 0 /** GPIO_FUNC35_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC35_IN_INV_SEL (BIT(5)) #define GPIO_FUNC35_IN_INV_SEL_M (GPIO_FUNC35_IN_INV_SEL_V << GPIO_FUNC35_IN_INV_SEL_S) #define GPIO_FUNC35_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC35_IN_INV_SEL_S 5 /** GPIO_SIG35_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG35_IN_SEL (BIT(6)) #define GPIO_SIG35_IN_SEL_M (GPIO_SIG35_IN_SEL_V << GPIO_SIG35_IN_SEL_S) #define GPIO_SIG35_IN_SEL_V 0x00000001U #define GPIO_SIG35_IN_SEL_S 6 /** GPIO_FUNC36_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC36_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1e4) /** GPIO_FUNC36_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC36_IN_SEL 0x0000001FU #define GPIO_FUNC36_IN_SEL_M (GPIO_FUNC36_IN_SEL_V << GPIO_FUNC36_IN_SEL_S) #define GPIO_FUNC36_IN_SEL_V 0x0000001FU #define GPIO_FUNC36_IN_SEL_S 0 /** GPIO_FUNC36_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC36_IN_INV_SEL (BIT(5)) #define GPIO_FUNC36_IN_INV_SEL_M (GPIO_FUNC36_IN_INV_SEL_V << GPIO_FUNC36_IN_INV_SEL_S) #define GPIO_FUNC36_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC36_IN_INV_SEL_S 5 /** GPIO_SIG36_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG36_IN_SEL (BIT(6)) #define GPIO_SIG36_IN_SEL_M (GPIO_SIG36_IN_SEL_V << GPIO_SIG36_IN_SEL_S) #define GPIO_SIG36_IN_SEL_V 0x00000001U #define GPIO_SIG36_IN_SEL_S 6 /** GPIO_FUNC37_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC37_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1e8) /** GPIO_FUNC37_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC37_IN_SEL 0x0000001FU #define GPIO_FUNC37_IN_SEL_M (GPIO_FUNC37_IN_SEL_V << GPIO_FUNC37_IN_SEL_S) #define GPIO_FUNC37_IN_SEL_V 0x0000001FU #define GPIO_FUNC37_IN_SEL_S 0 /** GPIO_FUNC37_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC37_IN_INV_SEL (BIT(5)) #define GPIO_FUNC37_IN_INV_SEL_M (GPIO_FUNC37_IN_INV_SEL_V << GPIO_FUNC37_IN_INV_SEL_S) #define GPIO_FUNC37_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC37_IN_INV_SEL_S 5 /** GPIO_SIG37_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG37_IN_SEL (BIT(6)) #define GPIO_SIG37_IN_SEL_M (GPIO_SIG37_IN_SEL_V << GPIO_SIG37_IN_SEL_S) #define GPIO_SIG37_IN_SEL_V 0x00000001U #define GPIO_SIG37_IN_SEL_S 6 /** GPIO_FUNC38_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC38_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1ec) /** GPIO_FUNC38_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC38_IN_SEL 0x0000001FU #define GPIO_FUNC38_IN_SEL_M (GPIO_FUNC38_IN_SEL_V << GPIO_FUNC38_IN_SEL_S) #define GPIO_FUNC38_IN_SEL_V 0x0000001FU #define GPIO_FUNC38_IN_SEL_S 0 /** GPIO_FUNC38_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC38_IN_INV_SEL (BIT(5)) #define GPIO_FUNC38_IN_INV_SEL_M (GPIO_FUNC38_IN_INV_SEL_V << GPIO_FUNC38_IN_INV_SEL_S) #define GPIO_FUNC38_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC38_IN_INV_SEL_S 5 /** GPIO_SIG38_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG38_IN_SEL (BIT(6)) #define GPIO_SIG38_IN_SEL_M (GPIO_SIG38_IN_SEL_V << GPIO_SIG38_IN_SEL_S) #define GPIO_SIG38_IN_SEL_V 0x00000001U #define GPIO_SIG38_IN_SEL_S 6 /** GPIO_FUNC39_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC39_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1f0) /** GPIO_FUNC39_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC39_IN_SEL 0x0000001FU #define GPIO_FUNC39_IN_SEL_M (GPIO_FUNC39_IN_SEL_V << GPIO_FUNC39_IN_SEL_S) #define GPIO_FUNC39_IN_SEL_V 0x0000001FU #define GPIO_FUNC39_IN_SEL_S 0 /** GPIO_FUNC39_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC39_IN_INV_SEL (BIT(5)) #define GPIO_FUNC39_IN_INV_SEL_M (GPIO_FUNC39_IN_INV_SEL_V << GPIO_FUNC39_IN_INV_SEL_S) #define GPIO_FUNC39_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC39_IN_INV_SEL_S 5 /** GPIO_SIG39_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG39_IN_SEL (BIT(6)) #define GPIO_SIG39_IN_SEL_M (GPIO_SIG39_IN_SEL_V << GPIO_SIG39_IN_SEL_S) #define GPIO_SIG39_IN_SEL_V 0x00000001U #define GPIO_SIG39_IN_SEL_S 6 /** GPIO_FUNC40_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC40_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1f4) /** GPIO_FUNC40_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC40_IN_SEL 0x0000001FU #define GPIO_FUNC40_IN_SEL_M (GPIO_FUNC40_IN_SEL_V << GPIO_FUNC40_IN_SEL_S) #define GPIO_FUNC40_IN_SEL_V 0x0000001FU #define GPIO_FUNC40_IN_SEL_S 0 /** GPIO_FUNC40_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC40_IN_INV_SEL (BIT(5)) #define GPIO_FUNC40_IN_INV_SEL_M (GPIO_FUNC40_IN_INV_SEL_V << GPIO_FUNC40_IN_INV_SEL_S) #define GPIO_FUNC40_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC40_IN_INV_SEL_S 5 /** GPIO_SIG40_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG40_IN_SEL (BIT(6)) #define GPIO_SIG40_IN_SEL_M (GPIO_SIG40_IN_SEL_V << GPIO_SIG40_IN_SEL_S) #define GPIO_SIG40_IN_SEL_V 0x00000001U #define GPIO_SIG40_IN_SEL_S 6 /** GPIO_FUNC41_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC41_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1f8) /** GPIO_FUNC41_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC41_IN_SEL 0x0000001FU #define GPIO_FUNC41_IN_SEL_M (GPIO_FUNC41_IN_SEL_V << GPIO_FUNC41_IN_SEL_S) #define GPIO_FUNC41_IN_SEL_V 0x0000001FU #define GPIO_FUNC41_IN_SEL_S 0 /** GPIO_FUNC41_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC41_IN_INV_SEL (BIT(5)) #define GPIO_FUNC41_IN_INV_SEL_M (GPIO_FUNC41_IN_INV_SEL_V << GPIO_FUNC41_IN_INV_SEL_S) #define GPIO_FUNC41_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC41_IN_INV_SEL_S 5 /** GPIO_SIG41_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG41_IN_SEL (BIT(6)) #define GPIO_SIG41_IN_SEL_M (GPIO_SIG41_IN_SEL_V << GPIO_SIG41_IN_SEL_S) #define GPIO_SIG41_IN_SEL_V 0x00000001U #define GPIO_SIG41_IN_SEL_S 6 /** GPIO_FUNC42_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC42_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x1fc) /** GPIO_FUNC42_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC42_IN_SEL 0x0000001FU #define GPIO_FUNC42_IN_SEL_M (GPIO_FUNC42_IN_SEL_V << GPIO_FUNC42_IN_SEL_S) #define GPIO_FUNC42_IN_SEL_V 0x0000001FU #define GPIO_FUNC42_IN_SEL_S 0 /** GPIO_FUNC42_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC42_IN_INV_SEL (BIT(5)) #define GPIO_FUNC42_IN_INV_SEL_M (GPIO_FUNC42_IN_INV_SEL_V << GPIO_FUNC42_IN_INV_SEL_S) #define GPIO_FUNC42_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC42_IN_INV_SEL_S 5 /** GPIO_SIG42_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG42_IN_SEL (BIT(6)) #define GPIO_SIG42_IN_SEL_M (GPIO_SIG42_IN_SEL_V << GPIO_SIG42_IN_SEL_S) #define GPIO_SIG42_IN_SEL_V 0x00000001U #define GPIO_SIG42_IN_SEL_S 6 /** GPIO_FUNC43_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC43_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x200) /** GPIO_FUNC43_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC43_IN_SEL 0x0000001FU #define GPIO_FUNC43_IN_SEL_M (GPIO_FUNC43_IN_SEL_V << GPIO_FUNC43_IN_SEL_S) #define GPIO_FUNC43_IN_SEL_V 0x0000001FU #define GPIO_FUNC43_IN_SEL_S 0 /** GPIO_FUNC43_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC43_IN_INV_SEL (BIT(5)) #define GPIO_FUNC43_IN_INV_SEL_M (GPIO_FUNC43_IN_INV_SEL_V << GPIO_FUNC43_IN_INV_SEL_S) #define GPIO_FUNC43_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC43_IN_INV_SEL_S 5 /** GPIO_SIG43_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG43_IN_SEL (BIT(6)) #define GPIO_SIG43_IN_SEL_M (GPIO_SIG43_IN_SEL_V << GPIO_SIG43_IN_SEL_S) #define GPIO_SIG43_IN_SEL_V 0x00000001U #define GPIO_SIG43_IN_SEL_S 6 /** GPIO_FUNC44_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC44_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x204) /** GPIO_FUNC44_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC44_IN_SEL 0x0000001FU #define GPIO_FUNC44_IN_SEL_M (GPIO_FUNC44_IN_SEL_V << GPIO_FUNC44_IN_SEL_S) #define GPIO_FUNC44_IN_SEL_V 0x0000001FU #define GPIO_FUNC44_IN_SEL_S 0 /** GPIO_FUNC44_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC44_IN_INV_SEL (BIT(5)) #define GPIO_FUNC44_IN_INV_SEL_M (GPIO_FUNC44_IN_INV_SEL_V << GPIO_FUNC44_IN_INV_SEL_S) #define GPIO_FUNC44_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC44_IN_INV_SEL_S 5 /** GPIO_SIG44_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG44_IN_SEL (BIT(6)) #define GPIO_SIG44_IN_SEL_M (GPIO_SIG44_IN_SEL_V << GPIO_SIG44_IN_SEL_S) #define GPIO_SIG44_IN_SEL_V 0x00000001U #define GPIO_SIG44_IN_SEL_S 6 /** GPIO_FUNC45_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC45_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x208) /** GPIO_FUNC45_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC45_IN_SEL 0x0000001FU #define GPIO_FUNC45_IN_SEL_M (GPIO_FUNC45_IN_SEL_V << GPIO_FUNC45_IN_SEL_S) #define GPIO_FUNC45_IN_SEL_V 0x0000001FU #define GPIO_FUNC45_IN_SEL_S 0 /** GPIO_FUNC45_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC45_IN_INV_SEL (BIT(5)) #define GPIO_FUNC45_IN_INV_SEL_M (GPIO_FUNC45_IN_INV_SEL_V << GPIO_FUNC45_IN_INV_SEL_S) #define GPIO_FUNC45_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC45_IN_INV_SEL_S 5 /** GPIO_SIG45_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG45_IN_SEL (BIT(6)) #define GPIO_SIG45_IN_SEL_M (GPIO_SIG45_IN_SEL_V << GPIO_SIG45_IN_SEL_S) #define GPIO_SIG45_IN_SEL_V 0x00000001U #define GPIO_SIG45_IN_SEL_S 6 /** GPIO_FUNC46_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC46_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x20c) /** GPIO_FUNC46_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC46_IN_SEL 0x0000001FU #define GPIO_FUNC46_IN_SEL_M (GPIO_FUNC46_IN_SEL_V << GPIO_FUNC46_IN_SEL_S) #define GPIO_FUNC46_IN_SEL_V 0x0000001FU #define GPIO_FUNC46_IN_SEL_S 0 /** GPIO_FUNC46_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC46_IN_INV_SEL (BIT(5)) #define GPIO_FUNC46_IN_INV_SEL_M (GPIO_FUNC46_IN_INV_SEL_V << GPIO_FUNC46_IN_INV_SEL_S) #define GPIO_FUNC46_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC46_IN_INV_SEL_S 5 /** GPIO_SIG46_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG46_IN_SEL (BIT(6)) #define GPIO_SIG46_IN_SEL_M (GPIO_SIG46_IN_SEL_V << GPIO_SIG46_IN_SEL_S) #define GPIO_SIG46_IN_SEL_V 0x00000001U #define GPIO_SIG46_IN_SEL_S 6 /** GPIO_FUNC47_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC47_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x210) /** GPIO_FUNC47_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC47_IN_SEL 0x0000001FU #define GPIO_FUNC47_IN_SEL_M (GPIO_FUNC47_IN_SEL_V << GPIO_FUNC47_IN_SEL_S) #define GPIO_FUNC47_IN_SEL_V 0x0000001FU #define GPIO_FUNC47_IN_SEL_S 0 /** GPIO_FUNC47_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC47_IN_INV_SEL (BIT(5)) #define GPIO_FUNC47_IN_INV_SEL_M (GPIO_FUNC47_IN_INV_SEL_V << GPIO_FUNC47_IN_INV_SEL_S) #define GPIO_FUNC47_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC47_IN_INV_SEL_S 5 /** GPIO_SIG47_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG47_IN_SEL (BIT(6)) #define GPIO_SIG47_IN_SEL_M (GPIO_SIG47_IN_SEL_V << GPIO_SIG47_IN_SEL_S) #define GPIO_SIG47_IN_SEL_V 0x00000001U #define GPIO_SIG47_IN_SEL_S 6 /** GPIO_FUNC48_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC48_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x214) /** GPIO_FUNC48_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC48_IN_SEL 0x0000001FU #define GPIO_FUNC48_IN_SEL_M (GPIO_FUNC48_IN_SEL_V << GPIO_FUNC48_IN_SEL_S) #define GPIO_FUNC48_IN_SEL_V 0x0000001FU #define GPIO_FUNC48_IN_SEL_S 0 /** GPIO_FUNC48_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC48_IN_INV_SEL (BIT(5)) #define GPIO_FUNC48_IN_INV_SEL_M (GPIO_FUNC48_IN_INV_SEL_V << GPIO_FUNC48_IN_INV_SEL_S) #define GPIO_FUNC48_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC48_IN_INV_SEL_S 5 /** GPIO_SIG48_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG48_IN_SEL (BIT(6)) #define GPIO_SIG48_IN_SEL_M (GPIO_SIG48_IN_SEL_V << GPIO_SIG48_IN_SEL_S) #define GPIO_SIG48_IN_SEL_V 0x00000001U #define GPIO_SIG48_IN_SEL_S 6 /** GPIO_FUNC49_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC49_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x218) /** GPIO_FUNC49_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC49_IN_SEL 0x0000001FU #define GPIO_FUNC49_IN_SEL_M (GPIO_FUNC49_IN_SEL_V << GPIO_FUNC49_IN_SEL_S) #define GPIO_FUNC49_IN_SEL_V 0x0000001FU #define GPIO_FUNC49_IN_SEL_S 0 /** GPIO_FUNC49_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC49_IN_INV_SEL (BIT(5)) #define GPIO_FUNC49_IN_INV_SEL_M (GPIO_FUNC49_IN_INV_SEL_V << GPIO_FUNC49_IN_INV_SEL_S) #define GPIO_FUNC49_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC49_IN_INV_SEL_S 5 /** GPIO_SIG49_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG49_IN_SEL (BIT(6)) #define GPIO_SIG49_IN_SEL_M (GPIO_SIG49_IN_SEL_V << GPIO_SIG49_IN_SEL_S) #define GPIO_SIG49_IN_SEL_V 0x00000001U #define GPIO_SIG49_IN_SEL_S 6 /** GPIO_FUNC50_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC50_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x21c) /** GPIO_FUNC50_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC50_IN_SEL 0x0000001FU #define GPIO_FUNC50_IN_SEL_M (GPIO_FUNC50_IN_SEL_V << GPIO_FUNC50_IN_SEL_S) #define GPIO_FUNC50_IN_SEL_V 0x0000001FU #define GPIO_FUNC50_IN_SEL_S 0 /** GPIO_FUNC50_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC50_IN_INV_SEL (BIT(5)) #define GPIO_FUNC50_IN_INV_SEL_M (GPIO_FUNC50_IN_INV_SEL_V << GPIO_FUNC50_IN_INV_SEL_S) #define GPIO_FUNC50_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC50_IN_INV_SEL_S 5 /** GPIO_SIG50_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG50_IN_SEL (BIT(6)) #define GPIO_SIG50_IN_SEL_M (GPIO_SIG50_IN_SEL_V << GPIO_SIG50_IN_SEL_S) #define GPIO_SIG50_IN_SEL_V 0x00000001U #define GPIO_SIG50_IN_SEL_S 6 /** GPIO_FUNC51_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC51_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x220) /** GPIO_FUNC51_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC51_IN_SEL 0x0000001FU #define GPIO_FUNC51_IN_SEL_M (GPIO_FUNC51_IN_SEL_V << GPIO_FUNC51_IN_SEL_S) #define GPIO_FUNC51_IN_SEL_V 0x0000001FU #define GPIO_FUNC51_IN_SEL_S 0 /** GPIO_FUNC51_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC51_IN_INV_SEL (BIT(5)) #define GPIO_FUNC51_IN_INV_SEL_M (GPIO_FUNC51_IN_INV_SEL_V << GPIO_FUNC51_IN_INV_SEL_S) #define GPIO_FUNC51_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC51_IN_INV_SEL_S 5 /** GPIO_SIG51_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG51_IN_SEL (BIT(6)) #define GPIO_SIG51_IN_SEL_M (GPIO_SIG51_IN_SEL_V << GPIO_SIG51_IN_SEL_S) #define GPIO_SIG51_IN_SEL_V 0x00000001U #define GPIO_SIG51_IN_SEL_S 6 /** GPIO_FUNC52_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC52_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x224) /** GPIO_FUNC52_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC52_IN_SEL 0x0000001FU #define GPIO_FUNC52_IN_SEL_M (GPIO_FUNC52_IN_SEL_V << GPIO_FUNC52_IN_SEL_S) #define GPIO_FUNC52_IN_SEL_V 0x0000001FU #define GPIO_FUNC52_IN_SEL_S 0 /** GPIO_FUNC52_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC52_IN_INV_SEL (BIT(5)) #define GPIO_FUNC52_IN_INV_SEL_M (GPIO_FUNC52_IN_INV_SEL_V << GPIO_FUNC52_IN_INV_SEL_S) #define GPIO_FUNC52_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC52_IN_INV_SEL_S 5 /** GPIO_SIG52_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG52_IN_SEL (BIT(6)) #define GPIO_SIG52_IN_SEL_M (GPIO_SIG52_IN_SEL_V << GPIO_SIG52_IN_SEL_S) #define GPIO_SIG52_IN_SEL_V 0x00000001U #define GPIO_SIG52_IN_SEL_S 6 /** GPIO_FUNC53_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC53_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x228) /** GPIO_FUNC53_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC53_IN_SEL 0x0000001FU #define GPIO_FUNC53_IN_SEL_M (GPIO_FUNC53_IN_SEL_V << GPIO_FUNC53_IN_SEL_S) #define GPIO_FUNC53_IN_SEL_V 0x0000001FU #define GPIO_FUNC53_IN_SEL_S 0 /** GPIO_FUNC53_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC53_IN_INV_SEL (BIT(5)) #define GPIO_FUNC53_IN_INV_SEL_M (GPIO_FUNC53_IN_INV_SEL_V << GPIO_FUNC53_IN_INV_SEL_S) #define GPIO_FUNC53_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC53_IN_INV_SEL_S 5 /** GPIO_SIG53_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG53_IN_SEL (BIT(6)) #define GPIO_SIG53_IN_SEL_M (GPIO_SIG53_IN_SEL_V << GPIO_SIG53_IN_SEL_S) #define GPIO_SIG53_IN_SEL_V 0x00000001U #define GPIO_SIG53_IN_SEL_S 6 /** GPIO_FUNC54_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC54_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x22c) /** GPIO_FUNC54_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC54_IN_SEL 0x0000001FU #define GPIO_FUNC54_IN_SEL_M (GPIO_FUNC54_IN_SEL_V << GPIO_FUNC54_IN_SEL_S) #define GPIO_FUNC54_IN_SEL_V 0x0000001FU #define GPIO_FUNC54_IN_SEL_S 0 /** GPIO_FUNC54_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC54_IN_INV_SEL (BIT(5)) #define GPIO_FUNC54_IN_INV_SEL_M (GPIO_FUNC54_IN_INV_SEL_V << GPIO_FUNC54_IN_INV_SEL_S) #define GPIO_FUNC54_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC54_IN_INV_SEL_S 5 /** GPIO_SIG54_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG54_IN_SEL (BIT(6)) #define GPIO_SIG54_IN_SEL_M (GPIO_SIG54_IN_SEL_V << GPIO_SIG54_IN_SEL_S) #define GPIO_SIG54_IN_SEL_V 0x00000001U #define GPIO_SIG54_IN_SEL_S 6 /** GPIO_FUNC55_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC55_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x230) /** GPIO_FUNC55_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC55_IN_SEL 0x0000001FU #define GPIO_FUNC55_IN_SEL_M (GPIO_FUNC55_IN_SEL_V << GPIO_FUNC55_IN_SEL_S) #define GPIO_FUNC55_IN_SEL_V 0x0000001FU #define GPIO_FUNC55_IN_SEL_S 0 /** GPIO_FUNC55_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC55_IN_INV_SEL (BIT(5)) #define GPIO_FUNC55_IN_INV_SEL_M (GPIO_FUNC55_IN_INV_SEL_V << GPIO_FUNC55_IN_INV_SEL_S) #define GPIO_FUNC55_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC55_IN_INV_SEL_S 5 /** GPIO_SIG55_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG55_IN_SEL (BIT(6)) #define GPIO_SIG55_IN_SEL_M (GPIO_SIG55_IN_SEL_V << GPIO_SIG55_IN_SEL_S) #define GPIO_SIG55_IN_SEL_V 0x00000001U #define GPIO_SIG55_IN_SEL_S 6 /** GPIO_FUNC56_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC56_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x234) /** GPIO_FUNC56_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC56_IN_SEL 0x0000001FU #define GPIO_FUNC56_IN_SEL_M (GPIO_FUNC56_IN_SEL_V << GPIO_FUNC56_IN_SEL_S) #define GPIO_FUNC56_IN_SEL_V 0x0000001FU #define GPIO_FUNC56_IN_SEL_S 0 /** GPIO_FUNC56_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC56_IN_INV_SEL (BIT(5)) #define GPIO_FUNC56_IN_INV_SEL_M (GPIO_FUNC56_IN_INV_SEL_V << GPIO_FUNC56_IN_INV_SEL_S) #define GPIO_FUNC56_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC56_IN_INV_SEL_S 5 /** GPIO_SIG56_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG56_IN_SEL (BIT(6)) #define GPIO_SIG56_IN_SEL_M (GPIO_SIG56_IN_SEL_V << GPIO_SIG56_IN_SEL_S) #define GPIO_SIG56_IN_SEL_V 0x00000001U #define GPIO_SIG56_IN_SEL_S 6 /** GPIO_FUNC57_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC57_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x238) /** GPIO_FUNC57_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC57_IN_SEL 0x0000001FU #define GPIO_FUNC57_IN_SEL_M (GPIO_FUNC57_IN_SEL_V << GPIO_FUNC57_IN_SEL_S) #define GPIO_FUNC57_IN_SEL_V 0x0000001FU #define GPIO_FUNC57_IN_SEL_S 0 /** GPIO_FUNC57_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC57_IN_INV_SEL (BIT(5)) #define GPIO_FUNC57_IN_INV_SEL_M (GPIO_FUNC57_IN_INV_SEL_V << GPIO_FUNC57_IN_INV_SEL_S) #define GPIO_FUNC57_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC57_IN_INV_SEL_S 5 /** GPIO_SIG57_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG57_IN_SEL (BIT(6)) #define GPIO_SIG57_IN_SEL_M (GPIO_SIG57_IN_SEL_V << GPIO_SIG57_IN_SEL_S) #define GPIO_SIG57_IN_SEL_V 0x00000001U #define GPIO_SIG57_IN_SEL_S 6 /** GPIO_FUNC58_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC58_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x23c) /** GPIO_FUNC58_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC58_IN_SEL 0x0000001FU #define GPIO_FUNC58_IN_SEL_M (GPIO_FUNC58_IN_SEL_V << GPIO_FUNC58_IN_SEL_S) #define GPIO_FUNC58_IN_SEL_V 0x0000001FU #define GPIO_FUNC58_IN_SEL_S 0 /** GPIO_FUNC58_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC58_IN_INV_SEL (BIT(5)) #define GPIO_FUNC58_IN_INV_SEL_M (GPIO_FUNC58_IN_INV_SEL_V << GPIO_FUNC58_IN_INV_SEL_S) #define GPIO_FUNC58_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC58_IN_INV_SEL_S 5 /** GPIO_SIG58_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG58_IN_SEL (BIT(6)) #define GPIO_SIG58_IN_SEL_M (GPIO_SIG58_IN_SEL_V << GPIO_SIG58_IN_SEL_S) #define GPIO_SIG58_IN_SEL_V 0x00000001U #define GPIO_SIG58_IN_SEL_S 6 /** GPIO_FUNC59_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC59_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x240) /** GPIO_FUNC59_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC59_IN_SEL 0x0000001FU #define GPIO_FUNC59_IN_SEL_M (GPIO_FUNC59_IN_SEL_V << GPIO_FUNC59_IN_SEL_S) #define GPIO_FUNC59_IN_SEL_V 0x0000001FU #define GPIO_FUNC59_IN_SEL_S 0 /** GPIO_FUNC59_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC59_IN_INV_SEL (BIT(5)) #define GPIO_FUNC59_IN_INV_SEL_M (GPIO_FUNC59_IN_INV_SEL_V << GPIO_FUNC59_IN_INV_SEL_S) #define GPIO_FUNC59_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC59_IN_INV_SEL_S 5 /** GPIO_SIG59_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG59_IN_SEL (BIT(6)) #define GPIO_SIG59_IN_SEL_M (GPIO_SIG59_IN_SEL_V << GPIO_SIG59_IN_SEL_S) #define GPIO_SIG59_IN_SEL_V 0x00000001U #define GPIO_SIG59_IN_SEL_S 6 /** GPIO_FUNC60_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC60_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x244) /** GPIO_FUNC60_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC60_IN_SEL 0x0000001FU #define GPIO_FUNC60_IN_SEL_M (GPIO_FUNC60_IN_SEL_V << GPIO_FUNC60_IN_SEL_S) #define GPIO_FUNC60_IN_SEL_V 0x0000001FU #define GPIO_FUNC60_IN_SEL_S 0 /** GPIO_FUNC60_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC60_IN_INV_SEL (BIT(5)) #define GPIO_FUNC60_IN_INV_SEL_M (GPIO_FUNC60_IN_INV_SEL_V << GPIO_FUNC60_IN_INV_SEL_S) #define GPIO_FUNC60_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC60_IN_INV_SEL_S 5 /** GPIO_SIG60_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG60_IN_SEL (BIT(6)) #define GPIO_SIG60_IN_SEL_M (GPIO_SIG60_IN_SEL_V << GPIO_SIG60_IN_SEL_S) #define GPIO_SIG60_IN_SEL_V 0x00000001U #define GPIO_SIG60_IN_SEL_S 6 /** GPIO_FUNC61_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC61_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x248) /** GPIO_FUNC61_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC61_IN_SEL 0x0000001FU #define GPIO_FUNC61_IN_SEL_M (GPIO_FUNC61_IN_SEL_V << GPIO_FUNC61_IN_SEL_S) #define GPIO_FUNC61_IN_SEL_V 0x0000001FU #define GPIO_FUNC61_IN_SEL_S 0 /** GPIO_FUNC61_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC61_IN_INV_SEL (BIT(5)) #define GPIO_FUNC61_IN_INV_SEL_M (GPIO_FUNC61_IN_INV_SEL_V << GPIO_FUNC61_IN_INV_SEL_S) #define GPIO_FUNC61_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC61_IN_INV_SEL_S 5 /** GPIO_SIG61_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG61_IN_SEL (BIT(6)) #define GPIO_SIG61_IN_SEL_M (GPIO_SIG61_IN_SEL_V << GPIO_SIG61_IN_SEL_S) #define GPIO_SIG61_IN_SEL_V 0x00000001U #define GPIO_SIG61_IN_SEL_S 6 /** GPIO_FUNC62_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC62_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x24c) /** GPIO_FUNC62_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC62_IN_SEL 0x0000001FU #define GPIO_FUNC62_IN_SEL_M (GPIO_FUNC62_IN_SEL_V << GPIO_FUNC62_IN_SEL_S) #define GPIO_FUNC62_IN_SEL_V 0x0000001FU #define GPIO_FUNC62_IN_SEL_S 0 /** GPIO_FUNC62_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC62_IN_INV_SEL (BIT(5)) #define GPIO_FUNC62_IN_INV_SEL_M (GPIO_FUNC62_IN_INV_SEL_V << GPIO_FUNC62_IN_INV_SEL_S) #define GPIO_FUNC62_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC62_IN_INV_SEL_S 5 /** GPIO_SIG62_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG62_IN_SEL (BIT(6)) #define GPIO_SIG62_IN_SEL_M (GPIO_SIG62_IN_SEL_V << GPIO_SIG62_IN_SEL_S) #define GPIO_SIG62_IN_SEL_V 0x00000001U #define GPIO_SIG62_IN_SEL_S 6 /** GPIO_FUNC63_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC63_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x250) /** GPIO_FUNC63_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC63_IN_SEL 0x0000001FU #define GPIO_FUNC63_IN_SEL_M (GPIO_FUNC63_IN_SEL_V << GPIO_FUNC63_IN_SEL_S) #define GPIO_FUNC63_IN_SEL_V 0x0000001FU #define GPIO_FUNC63_IN_SEL_S 0 /** GPIO_FUNC63_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC63_IN_INV_SEL (BIT(5)) #define GPIO_FUNC63_IN_INV_SEL_M (GPIO_FUNC63_IN_INV_SEL_V << GPIO_FUNC63_IN_INV_SEL_S) #define GPIO_FUNC63_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC63_IN_INV_SEL_S 5 /** GPIO_SIG63_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG63_IN_SEL (BIT(6)) #define GPIO_SIG63_IN_SEL_M (GPIO_SIG63_IN_SEL_V << GPIO_SIG63_IN_SEL_S) #define GPIO_SIG63_IN_SEL_V 0x00000001U #define GPIO_SIG63_IN_SEL_S 6 /** GPIO_FUNC64_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC64_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x254) /** GPIO_FUNC64_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC64_IN_SEL 0x0000001FU #define GPIO_FUNC64_IN_SEL_M (GPIO_FUNC64_IN_SEL_V << GPIO_FUNC64_IN_SEL_S) #define GPIO_FUNC64_IN_SEL_V 0x0000001FU #define GPIO_FUNC64_IN_SEL_S 0 /** GPIO_FUNC64_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC64_IN_INV_SEL (BIT(5)) #define GPIO_FUNC64_IN_INV_SEL_M (GPIO_FUNC64_IN_INV_SEL_V << GPIO_FUNC64_IN_INV_SEL_S) #define GPIO_FUNC64_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC64_IN_INV_SEL_S 5 /** GPIO_SIG64_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG64_IN_SEL (BIT(6)) #define GPIO_SIG64_IN_SEL_M (GPIO_SIG64_IN_SEL_V << GPIO_SIG64_IN_SEL_S) #define GPIO_SIG64_IN_SEL_V 0x00000001U #define GPIO_SIG64_IN_SEL_S 6 /** GPIO_FUNC65_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC65_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x258) /** GPIO_FUNC65_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC65_IN_SEL 0x0000001FU #define GPIO_FUNC65_IN_SEL_M (GPIO_FUNC65_IN_SEL_V << GPIO_FUNC65_IN_SEL_S) #define GPIO_FUNC65_IN_SEL_V 0x0000001FU #define GPIO_FUNC65_IN_SEL_S 0 /** GPIO_FUNC65_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC65_IN_INV_SEL (BIT(5)) #define GPIO_FUNC65_IN_INV_SEL_M (GPIO_FUNC65_IN_INV_SEL_V << GPIO_FUNC65_IN_INV_SEL_S) #define GPIO_FUNC65_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC65_IN_INV_SEL_S 5 /** GPIO_SIG65_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG65_IN_SEL (BIT(6)) #define GPIO_SIG65_IN_SEL_M (GPIO_SIG65_IN_SEL_V << GPIO_SIG65_IN_SEL_S) #define GPIO_SIG65_IN_SEL_V 0x00000001U #define GPIO_SIG65_IN_SEL_S 6 /** GPIO_FUNC66_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC66_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x25c) /** GPIO_FUNC66_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC66_IN_SEL 0x0000001FU #define GPIO_FUNC66_IN_SEL_M (GPIO_FUNC66_IN_SEL_V << GPIO_FUNC66_IN_SEL_S) #define GPIO_FUNC66_IN_SEL_V 0x0000001FU #define GPIO_FUNC66_IN_SEL_S 0 /** GPIO_FUNC66_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC66_IN_INV_SEL (BIT(5)) #define GPIO_FUNC66_IN_INV_SEL_M (GPIO_FUNC66_IN_INV_SEL_V << GPIO_FUNC66_IN_INV_SEL_S) #define GPIO_FUNC66_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC66_IN_INV_SEL_S 5 /** GPIO_SIG66_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG66_IN_SEL (BIT(6)) #define GPIO_SIG66_IN_SEL_M (GPIO_SIG66_IN_SEL_V << GPIO_SIG66_IN_SEL_S) #define GPIO_SIG66_IN_SEL_V 0x00000001U #define GPIO_SIG66_IN_SEL_S 6 /** GPIO_FUNC67_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC67_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x260) /** GPIO_FUNC67_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC67_IN_SEL 0x0000001FU #define GPIO_FUNC67_IN_SEL_M (GPIO_FUNC67_IN_SEL_V << GPIO_FUNC67_IN_SEL_S) #define GPIO_FUNC67_IN_SEL_V 0x0000001FU #define GPIO_FUNC67_IN_SEL_S 0 /** GPIO_FUNC67_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC67_IN_INV_SEL (BIT(5)) #define GPIO_FUNC67_IN_INV_SEL_M (GPIO_FUNC67_IN_INV_SEL_V << GPIO_FUNC67_IN_INV_SEL_S) #define GPIO_FUNC67_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC67_IN_INV_SEL_S 5 /** GPIO_SIG67_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG67_IN_SEL (BIT(6)) #define GPIO_SIG67_IN_SEL_M (GPIO_SIG67_IN_SEL_V << GPIO_SIG67_IN_SEL_S) #define GPIO_SIG67_IN_SEL_V 0x00000001U #define GPIO_SIG67_IN_SEL_S 6 /** GPIO_FUNC68_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC68_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x264) /** GPIO_FUNC68_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC68_IN_SEL 0x0000001FU #define GPIO_FUNC68_IN_SEL_M (GPIO_FUNC68_IN_SEL_V << GPIO_FUNC68_IN_SEL_S) #define GPIO_FUNC68_IN_SEL_V 0x0000001FU #define GPIO_FUNC68_IN_SEL_S 0 /** GPIO_FUNC68_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC68_IN_INV_SEL (BIT(5)) #define GPIO_FUNC68_IN_INV_SEL_M (GPIO_FUNC68_IN_INV_SEL_V << GPIO_FUNC68_IN_INV_SEL_S) #define GPIO_FUNC68_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC68_IN_INV_SEL_S 5 /** GPIO_SIG68_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG68_IN_SEL (BIT(6)) #define GPIO_SIG68_IN_SEL_M (GPIO_SIG68_IN_SEL_V << GPIO_SIG68_IN_SEL_S) #define GPIO_SIG68_IN_SEL_V 0x00000001U #define GPIO_SIG68_IN_SEL_S 6 /** GPIO_FUNC69_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC69_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x268) /** GPIO_FUNC69_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC69_IN_SEL 0x0000001FU #define GPIO_FUNC69_IN_SEL_M (GPIO_FUNC69_IN_SEL_V << GPIO_FUNC69_IN_SEL_S) #define GPIO_FUNC69_IN_SEL_V 0x0000001FU #define GPIO_FUNC69_IN_SEL_S 0 /** GPIO_FUNC69_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC69_IN_INV_SEL (BIT(5)) #define GPIO_FUNC69_IN_INV_SEL_M (GPIO_FUNC69_IN_INV_SEL_V << GPIO_FUNC69_IN_INV_SEL_S) #define GPIO_FUNC69_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC69_IN_INV_SEL_S 5 /** GPIO_SIG69_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG69_IN_SEL (BIT(6)) #define GPIO_SIG69_IN_SEL_M (GPIO_SIG69_IN_SEL_V << GPIO_SIG69_IN_SEL_S) #define GPIO_SIG69_IN_SEL_V 0x00000001U #define GPIO_SIG69_IN_SEL_S 6 /** GPIO_FUNC70_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC70_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x26c) /** GPIO_FUNC70_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC70_IN_SEL 0x0000001FU #define GPIO_FUNC70_IN_SEL_M (GPIO_FUNC70_IN_SEL_V << GPIO_FUNC70_IN_SEL_S) #define GPIO_FUNC70_IN_SEL_V 0x0000001FU #define GPIO_FUNC70_IN_SEL_S 0 /** GPIO_FUNC70_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC70_IN_INV_SEL (BIT(5)) #define GPIO_FUNC70_IN_INV_SEL_M (GPIO_FUNC70_IN_INV_SEL_V << GPIO_FUNC70_IN_INV_SEL_S) #define GPIO_FUNC70_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC70_IN_INV_SEL_S 5 /** GPIO_SIG70_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG70_IN_SEL (BIT(6)) #define GPIO_SIG70_IN_SEL_M (GPIO_SIG70_IN_SEL_V << GPIO_SIG70_IN_SEL_S) #define GPIO_SIG70_IN_SEL_V 0x00000001U #define GPIO_SIG70_IN_SEL_S 6 /** GPIO_FUNC71_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC71_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x270) /** GPIO_FUNC71_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC71_IN_SEL 0x0000001FU #define GPIO_FUNC71_IN_SEL_M (GPIO_FUNC71_IN_SEL_V << GPIO_FUNC71_IN_SEL_S) #define GPIO_FUNC71_IN_SEL_V 0x0000001FU #define GPIO_FUNC71_IN_SEL_S 0 /** GPIO_FUNC71_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC71_IN_INV_SEL (BIT(5)) #define GPIO_FUNC71_IN_INV_SEL_M (GPIO_FUNC71_IN_INV_SEL_V << GPIO_FUNC71_IN_INV_SEL_S) #define GPIO_FUNC71_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC71_IN_INV_SEL_S 5 /** GPIO_SIG71_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG71_IN_SEL (BIT(6)) #define GPIO_SIG71_IN_SEL_M (GPIO_SIG71_IN_SEL_V << GPIO_SIG71_IN_SEL_S) #define GPIO_SIG71_IN_SEL_V 0x00000001U #define GPIO_SIG71_IN_SEL_S 6 /** GPIO_FUNC72_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC72_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x274) /** GPIO_FUNC72_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC72_IN_SEL 0x0000001FU #define GPIO_FUNC72_IN_SEL_M (GPIO_FUNC72_IN_SEL_V << GPIO_FUNC72_IN_SEL_S) #define GPIO_FUNC72_IN_SEL_V 0x0000001FU #define GPIO_FUNC72_IN_SEL_S 0 /** GPIO_FUNC72_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC72_IN_INV_SEL (BIT(5)) #define GPIO_FUNC72_IN_INV_SEL_M (GPIO_FUNC72_IN_INV_SEL_V << GPIO_FUNC72_IN_INV_SEL_S) #define GPIO_FUNC72_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC72_IN_INV_SEL_S 5 /** GPIO_SIG72_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG72_IN_SEL (BIT(6)) #define GPIO_SIG72_IN_SEL_M (GPIO_SIG72_IN_SEL_V << GPIO_SIG72_IN_SEL_S) #define GPIO_SIG72_IN_SEL_V 0x00000001U #define GPIO_SIG72_IN_SEL_S 6 /** GPIO_FUNC73_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC73_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x278) /** GPIO_FUNC73_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC73_IN_SEL 0x0000001FU #define GPIO_FUNC73_IN_SEL_M (GPIO_FUNC73_IN_SEL_V << GPIO_FUNC73_IN_SEL_S) #define GPIO_FUNC73_IN_SEL_V 0x0000001FU #define GPIO_FUNC73_IN_SEL_S 0 /** GPIO_FUNC73_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC73_IN_INV_SEL (BIT(5)) #define GPIO_FUNC73_IN_INV_SEL_M (GPIO_FUNC73_IN_INV_SEL_V << GPIO_FUNC73_IN_INV_SEL_S) #define GPIO_FUNC73_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC73_IN_INV_SEL_S 5 /** GPIO_SIG73_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG73_IN_SEL (BIT(6)) #define GPIO_SIG73_IN_SEL_M (GPIO_SIG73_IN_SEL_V << GPIO_SIG73_IN_SEL_S) #define GPIO_SIG73_IN_SEL_V 0x00000001U #define GPIO_SIG73_IN_SEL_S 6 /** GPIO_FUNC74_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC74_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x27c) /** GPIO_FUNC74_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC74_IN_SEL 0x0000001FU #define GPIO_FUNC74_IN_SEL_M (GPIO_FUNC74_IN_SEL_V << GPIO_FUNC74_IN_SEL_S) #define GPIO_FUNC74_IN_SEL_V 0x0000001FU #define GPIO_FUNC74_IN_SEL_S 0 /** GPIO_FUNC74_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC74_IN_INV_SEL (BIT(5)) #define GPIO_FUNC74_IN_INV_SEL_M (GPIO_FUNC74_IN_INV_SEL_V << GPIO_FUNC74_IN_INV_SEL_S) #define GPIO_FUNC74_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC74_IN_INV_SEL_S 5 /** GPIO_SIG74_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG74_IN_SEL (BIT(6)) #define GPIO_SIG74_IN_SEL_M (GPIO_SIG74_IN_SEL_V << GPIO_SIG74_IN_SEL_S) #define GPIO_SIG74_IN_SEL_V 0x00000001U #define GPIO_SIG74_IN_SEL_S 6 /** GPIO_FUNC75_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC75_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x280) /** GPIO_FUNC75_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC75_IN_SEL 0x0000001FU #define GPIO_FUNC75_IN_SEL_M (GPIO_FUNC75_IN_SEL_V << GPIO_FUNC75_IN_SEL_S) #define GPIO_FUNC75_IN_SEL_V 0x0000001FU #define GPIO_FUNC75_IN_SEL_S 0 /** GPIO_FUNC75_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC75_IN_INV_SEL (BIT(5)) #define GPIO_FUNC75_IN_INV_SEL_M (GPIO_FUNC75_IN_INV_SEL_V << GPIO_FUNC75_IN_INV_SEL_S) #define GPIO_FUNC75_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC75_IN_INV_SEL_S 5 /** GPIO_SIG75_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG75_IN_SEL (BIT(6)) #define GPIO_SIG75_IN_SEL_M (GPIO_SIG75_IN_SEL_V << GPIO_SIG75_IN_SEL_S) #define GPIO_SIG75_IN_SEL_V 0x00000001U #define GPIO_SIG75_IN_SEL_S 6 /** GPIO_FUNC76_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC76_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x284) /** GPIO_FUNC76_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC76_IN_SEL 0x0000001FU #define GPIO_FUNC76_IN_SEL_M (GPIO_FUNC76_IN_SEL_V << GPIO_FUNC76_IN_SEL_S) #define GPIO_FUNC76_IN_SEL_V 0x0000001FU #define GPIO_FUNC76_IN_SEL_S 0 /** GPIO_FUNC76_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC76_IN_INV_SEL (BIT(5)) #define GPIO_FUNC76_IN_INV_SEL_M (GPIO_FUNC76_IN_INV_SEL_V << GPIO_FUNC76_IN_INV_SEL_S) #define GPIO_FUNC76_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC76_IN_INV_SEL_S 5 /** GPIO_SIG76_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG76_IN_SEL (BIT(6)) #define GPIO_SIG76_IN_SEL_M (GPIO_SIG76_IN_SEL_V << GPIO_SIG76_IN_SEL_S) #define GPIO_SIG76_IN_SEL_V 0x00000001U #define GPIO_SIG76_IN_SEL_S 6 /** GPIO_FUNC77_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC77_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x288) /** GPIO_FUNC77_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC77_IN_SEL 0x0000001FU #define GPIO_FUNC77_IN_SEL_M (GPIO_FUNC77_IN_SEL_V << GPIO_FUNC77_IN_SEL_S) #define GPIO_FUNC77_IN_SEL_V 0x0000001FU #define GPIO_FUNC77_IN_SEL_S 0 /** GPIO_FUNC77_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC77_IN_INV_SEL (BIT(5)) #define GPIO_FUNC77_IN_INV_SEL_M (GPIO_FUNC77_IN_INV_SEL_V << GPIO_FUNC77_IN_INV_SEL_S) #define GPIO_FUNC77_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC77_IN_INV_SEL_S 5 /** GPIO_SIG77_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG77_IN_SEL (BIT(6)) #define GPIO_SIG77_IN_SEL_M (GPIO_SIG77_IN_SEL_V << GPIO_SIG77_IN_SEL_S) #define GPIO_SIG77_IN_SEL_V 0x00000001U #define GPIO_SIG77_IN_SEL_S 6 /** GPIO_FUNC78_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC78_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x28c) /** GPIO_FUNC78_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC78_IN_SEL 0x0000001FU #define GPIO_FUNC78_IN_SEL_M (GPIO_FUNC78_IN_SEL_V << GPIO_FUNC78_IN_SEL_S) #define GPIO_FUNC78_IN_SEL_V 0x0000001FU #define GPIO_FUNC78_IN_SEL_S 0 /** GPIO_FUNC78_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC78_IN_INV_SEL (BIT(5)) #define GPIO_FUNC78_IN_INV_SEL_M (GPIO_FUNC78_IN_INV_SEL_V << GPIO_FUNC78_IN_INV_SEL_S) #define GPIO_FUNC78_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC78_IN_INV_SEL_S 5 /** GPIO_SIG78_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG78_IN_SEL (BIT(6)) #define GPIO_SIG78_IN_SEL_M (GPIO_SIG78_IN_SEL_V << GPIO_SIG78_IN_SEL_S) #define GPIO_SIG78_IN_SEL_V 0x00000001U #define GPIO_SIG78_IN_SEL_S 6 /** GPIO_FUNC79_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC79_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x290) /** GPIO_FUNC79_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC79_IN_SEL 0x0000001FU #define GPIO_FUNC79_IN_SEL_M (GPIO_FUNC79_IN_SEL_V << GPIO_FUNC79_IN_SEL_S) #define GPIO_FUNC79_IN_SEL_V 0x0000001FU #define GPIO_FUNC79_IN_SEL_S 0 /** GPIO_FUNC79_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC79_IN_INV_SEL (BIT(5)) #define GPIO_FUNC79_IN_INV_SEL_M (GPIO_FUNC79_IN_INV_SEL_V << GPIO_FUNC79_IN_INV_SEL_S) #define GPIO_FUNC79_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC79_IN_INV_SEL_S 5 /** GPIO_SIG79_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG79_IN_SEL (BIT(6)) #define GPIO_SIG79_IN_SEL_M (GPIO_SIG79_IN_SEL_V << GPIO_SIG79_IN_SEL_S) #define GPIO_SIG79_IN_SEL_V 0x00000001U #define GPIO_SIG79_IN_SEL_S 6 /** GPIO_FUNC80_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC80_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x294) /** GPIO_FUNC80_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC80_IN_SEL 0x0000001FU #define GPIO_FUNC80_IN_SEL_M (GPIO_FUNC80_IN_SEL_V << GPIO_FUNC80_IN_SEL_S) #define GPIO_FUNC80_IN_SEL_V 0x0000001FU #define GPIO_FUNC80_IN_SEL_S 0 /** GPIO_FUNC80_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC80_IN_INV_SEL (BIT(5)) #define GPIO_FUNC80_IN_INV_SEL_M (GPIO_FUNC80_IN_INV_SEL_V << GPIO_FUNC80_IN_INV_SEL_S) #define GPIO_FUNC80_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC80_IN_INV_SEL_S 5 /** GPIO_SIG80_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG80_IN_SEL (BIT(6)) #define GPIO_SIG80_IN_SEL_M (GPIO_SIG80_IN_SEL_V << GPIO_SIG80_IN_SEL_S) #define GPIO_SIG80_IN_SEL_V 0x00000001U #define GPIO_SIG80_IN_SEL_S 6 /** GPIO_FUNC81_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC81_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x298) /** GPIO_FUNC81_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC81_IN_SEL 0x0000001FU #define GPIO_FUNC81_IN_SEL_M (GPIO_FUNC81_IN_SEL_V << GPIO_FUNC81_IN_SEL_S) #define GPIO_FUNC81_IN_SEL_V 0x0000001FU #define GPIO_FUNC81_IN_SEL_S 0 /** GPIO_FUNC81_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC81_IN_INV_SEL (BIT(5)) #define GPIO_FUNC81_IN_INV_SEL_M (GPIO_FUNC81_IN_INV_SEL_V << GPIO_FUNC81_IN_INV_SEL_S) #define GPIO_FUNC81_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC81_IN_INV_SEL_S 5 /** GPIO_SIG81_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG81_IN_SEL (BIT(6)) #define GPIO_SIG81_IN_SEL_M (GPIO_SIG81_IN_SEL_V << GPIO_SIG81_IN_SEL_S) #define GPIO_SIG81_IN_SEL_V 0x00000001U #define GPIO_SIG81_IN_SEL_S 6 /** GPIO_FUNC82_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC82_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x29c) /** GPIO_FUNC82_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC82_IN_SEL 0x0000001FU #define GPIO_FUNC82_IN_SEL_M (GPIO_FUNC82_IN_SEL_V << GPIO_FUNC82_IN_SEL_S) #define GPIO_FUNC82_IN_SEL_V 0x0000001FU #define GPIO_FUNC82_IN_SEL_S 0 /** GPIO_FUNC82_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC82_IN_INV_SEL (BIT(5)) #define GPIO_FUNC82_IN_INV_SEL_M (GPIO_FUNC82_IN_INV_SEL_V << GPIO_FUNC82_IN_INV_SEL_S) #define GPIO_FUNC82_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC82_IN_INV_SEL_S 5 /** GPIO_SIG82_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG82_IN_SEL (BIT(6)) #define GPIO_SIG82_IN_SEL_M (GPIO_SIG82_IN_SEL_V << GPIO_SIG82_IN_SEL_S) #define GPIO_SIG82_IN_SEL_V 0x00000001U #define GPIO_SIG82_IN_SEL_S 6 /** GPIO_FUNC83_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC83_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2a0) /** GPIO_FUNC83_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC83_IN_SEL 0x0000001FU #define GPIO_FUNC83_IN_SEL_M (GPIO_FUNC83_IN_SEL_V << GPIO_FUNC83_IN_SEL_S) #define GPIO_FUNC83_IN_SEL_V 0x0000001FU #define GPIO_FUNC83_IN_SEL_S 0 /** GPIO_FUNC83_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC83_IN_INV_SEL (BIT(5)) #define GPIO_FUNC83_IN_INV_SEL_M (GPIO_FUNC83_IN_INV_SEL_V << GPIO_FUNC83_IN_INV_SEL_S) #define GPIO_FUNC83_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC83_IN_INV_SEL_S 5 /** GPIO_SIG83_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG83_IN_SEL (BIT(6)) #define GPIO_SIG83_IN_SEL_M (GPIO_SIG83_IN_SEL_V << GPIO_SIG83_IN_SEL_S) #define GPIO_SIG83_IN_SEL_V 0x00000001U #define GPIO_SIG83_IN_SEL_S 6 /** GPIO_FUNC84_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC84_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2a4) /** GPIO_FUNC84_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC84_IN_SEL 0x0000001FU #define GPIO_FUNC84_IN_SEL_M (GPIO_FUNC84_IN_SEL_V << GPIO_FUNC84_IN_SEL_S) #define GPIO_FUNC84_IN_SEL_V 0x0000001FU #define GPIO_FUNC84_IN_SEL_S 0 /** GPIO_FUNC84_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC84_IN_INV_SEL (BIT(5)) #define GPIO_FUNC84_IN_INV_SEL_M (GPIO_FUNC84_IN_INV_SEL_V << GPIO_FUNC84_IN_INV_SEL_S) #define GPIO_FUNC84_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC84_IN_INV_SEL_S 5 /** GPIO_SIG84_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG84_IN_SEL (BIT(6)) #define GPIO_SIG84_IN_SEL_M (GPIO_SIG84_IN_SEL_V << GPIO_SIG84_IN_SEL_S) #define GPIO_SIG84_IN_SEL_V 0x00000001U #define GPIO_SIG84_IN_SEL_S 6 /** GPIO_FUNC85_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC85_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2a8) /** GPIO_FUNC85_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC85_IN_SEL 0x0000001FU #define GPIO_FUNC85_IN_SEL_M (GPIO_FUNC85_IN_SEL_V << GPIO_FUNC85_IN_SEL_S) #define GPIO_FUNC85_IN_SEL_V 0x0000001FU #define GPIO_FUNC85_IN_SEL_S 0 /** GPIO_FUNC85_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC85_IN_INV_SEL (BIT(5)) #define GPIO_FUNC85_IN_INV_SEL_M (GPIO_FUNC85_IN_INV_SEL_V << GPIO_FUNC85_IN_INV_SEL_S) #define GPIO_FUNC85_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC85_IN_INV_SEL_S 5 /** GPIO_SIG85_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG85_IN_SEL (BIT(6)) #define GPIO_SIG85_IN_SEL_M (GPIO_SIG85_IN_SEL_V << GPIO_SIG85_IN_SEL_S) #define GPIO_SIG85_IN_SEL_V 0x00000001U #define GPIO_SIG85_IN_SEL_S 6 /** GPIO_FUNC86_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC86_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2ac) /** GPIO_FUNC86_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC86_IN_SEL 0x0000001FU #define GPIO_FUNC86_IN_SEL_M (GPIO_FUNC86_IN_SEL_V << GPIO_FUNC86_IN_SEL_S) #define GPIO_FUNC86_IN_SEL_V 0x0000001FU #define GPIO_FUNC86_IN_SEL_S 0 /** GPIO_FUNC86_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC86_IN_INV_SEL (BIT(5)) #define GPIO_FUNC86_IN_INV_SEL_M (GPIO_FUNC86_IN_INV_SEL_V << GPIO_FUNC86_IN_INV_SEL_S) #define GPIO_FUNC86_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC86_IN_INV_SEL_S 5 /** GPIO_SIG86_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG86_IN_SEL (BIT(6)) #define GPIO_SIG86_IN_SEL_M (GPIO_SIG86_IN_SEL_V << GPIO_SIG86_IN_SEL_S) #define GPIO_SIG86_IN_SEL_V 0x00000001U #define GPIO_SIG86_IN_SEL_S 6 /** GPIO_FUNC87_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC87_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2b0) /** GPIO_FUNC87_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC87_IN_SEL 0x0000001FU #define GPIO_FUNC87_IN_SEL_M (GPIO_FUNC87_IN_SEL_V << GPIO_FUNC87_IN_SEL_S) #define GPIO_FUNC87_IN_SEL_V 0x0000001FU #define GPIO_FUNC87_IN_SEL_S 0 /** GPIO_FUNC87_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC87_IN_INV_SEL (BIT(5)) #define GPIO_FUNC87_IN_INV_SEL_M (GPIO_FUNC87_IN_INV_SEL_V << GPIO_FUNC87_IN_INV_SEL_S) #define GPIO_FUNC87_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC87_IN_INV_SEL_S 5 /** GPIO_SIG87_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG87_IN_SEL (BIT(6)) #define GPIO_SIG87_IN_SEL_M (GPIO_SIG87_IN_SEL_V << GPIO_SIG87_IN_SEL_S) #define GPIO_SIG87_IN_SEL_V 0x00000001U #define GPIO_SIG87_IN_SEL_S 6 /** GPIO_FUNC88_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC88_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2b4) /** GPIO_FUNC88_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC88_IN_SEL 0x0000001FU #define GPIO_FUNC88_IN_SEL_M (GPIO_FUNC88_IN_SEL_V << GPIO_FUNC88_IN_SEL_S) #define GPIO_FUNC88_IN_SEL_V 0x0000001FU #define GPIO_FUNC88_IN_SEL_S 0 /** GPIO_FUNC88_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC88_IN_INV_SEL (BIT(5)) #define GPIO_FUNC88_IN_INV_SEL_M (GPIO_FUNC88_IN_INV_SEL_V << GPIO_FUNC88_IN_INV_SEL_S) #define GPIO_FUNC88_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC88_IN_INV_SEL_S 5 /** GPIO_SIG88_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG88_IN_SEL (BIT(6)) #define GPIO_SIG88_IN_SEL_M (GPIO_SIG88_IN_SEL_V << GPIO_SIG88_IN_SEL_S) #define GPIO_SIG88_IN_SEL_V 0x00000001U #define GPIO_SIG88_IN_SEL_S 6 /** GPIO_FUNC89_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC89_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2b8) /** GPIO_FUNC89_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC89_IN_SEL 0x0000001FU #define GPIO_FUNC89_IN_SEL_M (GPIO_FUNC89_IN_SEL_V << GPIO_FUNC89_IN_SEL_S) #define GPIO_FUNC89_IN_SEL_V 0x0000001FU #define GPIO_FUNC89_IN_SEL_S 0 /** GPIO_FUNC89_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC89_IN_INV_SEL (BIT(5)) #define GPIO_FUNC89_IN_INV_SEL_M (GPIO_FUNC89_IN_INV_SEL_V << GPIO_FUNC89_IN_INV_SEL_S) #define GPIO_FUNC89_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC89_IN_INV_SEL_S 5 /** GPIO_SIG89_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG89_IN_SEL (BIT(6)) #define GPIO_SIG89_IN_SEL_M (GPIO_SIG89_IN_SEL_V << GPIO_SIG89_IN_SEL_S) #define GPIO_SIG89_IN_SEL_V 0x00000001U #define GPIO_SIG89_IN_SEL_S 6 /** GPIO_FUNC90_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC90_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2bc) /** GPIO_FUNC90_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC90_IN_SEL 0x0000001FU #define GPIO_FUNC90_IN_SEL_M (GPIO_FUNC90_IN_SEL_V << GPIO_FUNC90_IN_SEL_S) #define GPIO_FUNC90_IN_SEL_V 0x0000001FU #define GPIO_FUNC90_IN_SEL_S 0 /** GPIO_FUNC90_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC90_IN_INV_SEL (BIT(5)) #define GPIO_FUNC90_IN_INV_SEL_M (GPIO_FUNC90_IN_INV_SEL_V << GPIO_FUNC90_IN_INV_SEL_S) #define GPIO_FUNC90_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC90_IN_INV_SEL_S 5 /** GPIO_SIG90_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG90_IN_SEL (BIT(6)) #define GPIO_SIG90_IN_SEL_M (GPIO_SIG90_IN_SEL_V << GPIO_SIG90_IN_SEL_S) #define GPIO_SIG90_IN_SEL_V 0x00000001U #define GPIO_SIG90_IN_SEL_S 6 /** GPIO_FUNC91_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC91_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2c0) /** GPIO_FUNC91_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC91_IN_SEL 0x0000001FU #define GPIO_FUNC91_IN_SEL_M (GPIO_FUNC91_IN_SEL_V << GPIO_FUNC91_IN_SEL_S) #define GPIO_FUNC91_IN_SEL_V 0x0000001FU #define GPIO_FUNC91_IN_SEL_S 0 /** GPIO_FUNC91_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC91_IN_INV_SEL (BIT(5)) #define GPIO_FUNC91_IN_INV_SEL_M (GPIO_FUNC91_IN_INV_SEL_V << GPIO_FUNC91_IN_INV_SEL_S) #define GPIO_FUNC91_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC91_IN_INV_SEL_S 5 /** GPIO_SIG91_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG91_IN_SEL (BIT(6)) #define GPIO_SIG91_IN_SEL_M (GPIO_SIG91_IN_SEL_V << GPIO_SIG91_IN_SEL_S) #define GPIO_SIG91_IN_SEL_V 0x00000001U #define GPIO_SIG91_IN_SEL_S 6 /** GPIO_FUNC92_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC92_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2c4) /** GPIO_FUNC92_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC92_IN_SEL 0x0000001FU #define GPIO_FUNC92_IN_SEL_M (GPIO_FUNC92_IN_SEL_V << GPIO_FUNC92_IN_SEL_S) #define GPIO_FUNC92_IN_SEL_V 0x0000001FU #define GPIO_FUNC92_IN_SEL_S 0 /** GPIO_FUNC92_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC92_IN_INV_SEL (BIT(5)) #define GPIO_FUNC92_IN_INV_SEL_M (GPIO_FUNC92_IN_INV_SEL_V << GPIO_FUNC92_IN_INV_SEL_S) #define GPIO_FUNC92_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC92_IN_INV_SEL_S 5 /** GPIO_SIG92_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG92_IN_SEL (BIT(6)) #define GPIO_SIG92_IN_SEL_M (GPIO_SIG92_IN_SEL_V << GPIO_SIG92_IN_SEL_S) #define GPIO_SIG92_IN_SEL_V 0x00000001U #define GPIO_SIG92_IN_SEL_S 6 /** GPIO_FUNC93_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC93_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2c8) /** GPIO_FUNC93_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC93_IN_SEL 0x0000001FU #define GPIO_FUNC93_IN_SEL_M (GPIO_FUNC93_IN_SEL_V << GPIO_FUNC93_IN_SEL_S) #define GPIO_FUNC93_IN_SEL_V 0x0000001FU #define GPIO_FUNC93_IN_SEL_S 0 /** GPIO_FUNC93_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC93_IN_INV_SEL (BIT(5)) #define GPIO_FUNC93_IN_INV_SEL_M (GPIO_FUNC93_IN_INV_SEL_V << GPIO_FUNC93_IN_INV_SEL_S) #define GPIO_FUNC93_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC93_IN_INV_SEL_S 5 /** GPIO_SIG93_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG93_IN_SEL (BIT(6)) #define GPIO_SIG93_IN_SEL_M (GPIO_SIG93_IN_SEL_V << GPIO_SIG93_IN_SEL_S) #define GPIO_SIG93_IN_SEL_V 0x00000001U #define GPIO_SIG93_IN_SEL_S 6 /** GPIO_FUNC94_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC94_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2cc) /** GPIO_FUNC94_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC94_IN_SEL 0x0000001FU #define GPIO_FUNC94_IN_SEL_M (GPIO_FUNC94_IN_SEL_V << GPIO_FUNC94_IN_SEL_S) #define GPIO_FUNC94_IN_SEL_V 0x0000001FU #define GPIO_FUNC94_IN_SEL_S 0 /** GPIO_FUNC94_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC94_IN_INV_SEL (BIT(5)) #define GPIO_FUNC94_IN_INV_SEL_M (GPIO_FUNC94_IN_INV_SEL_V << GPIO_FUNC94_IN_INV_SEL_S) #define GPIO_FUNC94_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC94_IN_INV_SEL_S 5 /** GPIO_SIG94_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG94_IN_SEL (BIT(6)) #define GPIO_SIG94_IN_SEL_M (GPIO_SIG94_IN_SEL_V << GPIO_SIG94_IN_SEL_S) #define GPIO_SIG94_IN_SEL_V 0x00000001U #define GPIO_SIG94_IN_SEL_S 6 /** GPIO_FUNC95_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC95_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2d0) /** GPIO_FUNC95_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC95_IN_SEL 0x0000001FU #define GPIO_FUNC95_IN_SEL_M (GPIO_FUNC95_IN_SEL_V << GPIO_FUNC95_IN_SEL_S) #define GPIO_FUNC95_IN_SEL_V 0x0000001FU #define GPIO_FUNC95_IN_SEL_S 0 /** GPIO_FUNC95_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC95_IN_INV_SEL (BIT(5)) #define GPIO_FUNC95_IN_INV_SEL_M (GPIO_FUNC95_IN_INV_SEL_V << GPIO_FUNC95_IN_INV_SEL_S) #define GPIO_FUNC95_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC95_IN_INV_SEL_S 5 /** GPIO_SIG95_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG95_IN_SEL (BIT(6)) #define GPIO_SIG95_IN_SEL_M (GPIO_SIG95_IN_SEL_V << GPIO_SIG95_IN_SEL_S) #define GPIO_SIG95_IN_SEL_V 0x00000001U #define GPIO_SIG95_IN_SEL_S 6 /** GPIO_FUNC96_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC96_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2d4) /** GPIO_FUNC96_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC96_IN_SEL 0x0000001FU #define GPIO_FUNC96_IN_SEL_M (GPIO_FUNC96_IN_SEL_V << GPIO_FUNC96_IN_SEL_S) #define GPIO_FUNC96_IN_SEL_V 0x0000001FU #define GPIO_FUNC96_IN_SEL_S 0 /** GPIO_FUNC96_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC96_IN_INV_SEL (BIT(5)) #define GPIO_FUNC96_IN_INV_SEL_M (GPIO_FUNC96_IN_INV_SEL_V << GPIO_FUNC96_IN_INV_SEL_S) #define GPIO_FUNC96_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC96_IN_INV_SEL_S 5 /** GPIO_SIG96_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG96_IN_SEL (BIT(6)) #define GPIO_SIG96_IN_SEL_M (GPIO_SIG96_IN_SEL_V << GPIO_SIG96_IN_SEL_S) #define GPIO_SIG96_IN_SEL_V 0x00000001U #define GPIO_SIG96_IN_SEL_S 6 /** GPIO_FUNC97_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC97_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2d8) /** GPIO_FUNC97_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC97_IN_SEL 0x0000001FU #define GPIO_FUNC97_IN_SEL_M (GPIO_FUNC97_IN_SEL_V << GPIO_FUNC97_IN_SEL_S) #define GPIO_FUNC97_IN_SEL_V 0x0000001FU #define GPIO_FUNC97_IN_SEL_S 0 /** GPIO_FUNC97_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC97_IN_INV_SEL (BIT(5)) #define GPIO_FUNC97_IN_INV_SEL_M (GPIO_FUNC97_IN_INV_SEL_V << GPIO_FUNC97_IN_INV_SEL_S) #define GPIO_FUNC97_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC97_IN_INV_SEL_S 5 /** GPIO_SIG97_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG97_IN_SEL (BIT(6)) #define GPIO_SIG97_IN_SEL_M (GPIO_SIG97_IN_SEL_V << GPIO_SIG97_IN_SEL_S) #define GPIO_SIG97_IN_SEL_V 0x00000001U #define GPIO_SIG97_IN_SEL_S 6 /** GPIO_FUNC98_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC98_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2dc) /** GPIO_FUNC98_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC98_IN_SEL 0x0000001FU #define GPIO_FUNC98_IN_SEL_M (GPIO_FUNC98_IN_SEL_V << GPIO_FUNC98_IN_SEL_S) #define GPIO_FUNC98_IN_SEL_V 0x0000001FU #define GPIO_FUNC98_IN_SEL_S 0 /** GPIO_FUNC98_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC98_IN_INV_SEL (BIT(5)) #define GPIO_FUNC98_IN_INV_SEL_M (GPIO_FUNC98_IN_INV_SEL_V << GPIO_FUNC98_IN_INV_SEL_S) #define GPIO_FUNC98_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC98_IN_INV_SEL_S 5 /** GPIO_SIG98_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG98_IN_SEL (BIT(6)) #define GPIO_SIG98_IN_SEL_M (GPIO_SIG98_IN_SEL_V << GPIO_SIG98_IN_SEL_S) #define GPIO_SIG98_IN_SEL_V 0x00000001U #define GPIO_SIG98_IN_SEL_S 6 /** GPIO_FUNC99_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC99_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2e0) /** GPIO_FUNC99_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC99_IN_SEL 0x0000001FU #define GPIO_FUNC99_IN_SEL_M (GPIO_FUNC99_IN_SEL_V << GPIO_FUNC99_IN_SEL_S) #define GPIO_FUNC99_IN_SEL_V 0x0000001FU #define GPIO_FUNC99_IN_SEL_S 0 /** GPIO_FUNC99_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC99_IN_INV_SEL (BIT(5)) #define GPIO_FUNC99_IN_INV_SEL_M (GPIO_FUNC99_IN_INV_SEL_V << GPIO_FUNC99_IN_INV_SEL_S) #define GPIO_FUNC99_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC99_IN_INV_SEL_S 5 /** GPIO_SIG99_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG99_IN_SEL (BIT(6)) #define GPIO_SIG99_IN_SEL_M (GPIO_SIG99_IN_SEL_V << GPIO_SIG99_IN_SEL_S) #define GPIO_SIG99_IN_SEL_V 0x00000001U #define GPIO_SIG99_IN_SEL_S 6 /** GPIO_FUNC100_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC100_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2e4) /** GPIO_FUNC100_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC100_IN_SEL 0x0000001FU #define GPIO_FUNC100_IN_SEL_M (GPIO_FUNC100_IN_SEL_V << GPIO_FUNC100_IN_SEL_S) #define GPIO_FUNC100_IN_SEL_V 0x0000001FU #define GPIO_FUNC100_IN_SEL_S 0 /** GPIO_FUNC100_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC100_IN_INV_SEL (BIT(5)) #define GPIO_FUNC100_IN_INV_SEL_M (GPIO_FUNC100_IN_INV_SEL_V << GPIO_FUNC100_IN_INV_SEL_S) #define GPIO_FUNC100_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC100_IN_INV_SEL_S 5 /** GPIO_SIG100_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG100_IN_SEL (BIT(6)) #define GPIO_SIG100_IN_SEL_M (GPIO_SIG100_IN_SEL_V << GPIO_SIG100_IN_SEL_S) #define GPIO_SIG100_IN_SEL_V 0x00000001U #define GPIO_SIG100_IN_SEL_S 6 /** GPIO_FUNC101_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC101_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2e8) /** GPIO_FUNC101_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC101_IN_SEL 0x0000001FU #define GPIO_FUNC101_IN_SEL_M (GPIO_FUNC101_IN_SEL_V << GPIO_FUNC101_IN_SEL_S) #define GPIO_FUNC101_IN_SEL_V 0x0000001FU #define GPIO_FUNC101_IN_SEL_S 0 /** GPIO_FUNC101_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC101_IN_INV_SEL (BIT(5)) #define GPIO_FUNC101_IN_INV_SEL_M (GPIO_FUNC101_IN_INV_SEL_V << GPIO_FUNC101_IN_INV_SEL_S) #define GPIO_FUNC101_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC101_IN_INV_SEL_S 5 /** GPIO_SIG101_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG101_IN_SEL (BIT(6)) #define GPIO_SIG101_IN_SEL_M (GPIO_SIG101_IN_SEL_V << GPIO_SIG101_IN_SEL_S) #define GPIO_SIG101_IN_SEL_V 0x00000001U #define GPIO_SIG101_IN_SEL_S 6 /** GPIO_FUNC102_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC102_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2ec) /** GPIO_FUNC102_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC102_IN_SEL 0x0000001FU #define GPIO_FUNC102_IN_SEL_M (GPIO_FUNC102_IN_SEL_V << GPIO_FUNC102_IN_SEL_S) #define GPIO_FUNC102_IN_SEL_V 0x0000001FU #define GPIO_FUNC102_IN_SEL_S 0 /** GPIO_FUNC102_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC102_IN_INV_SEL (BIT(5)) #define GPIO_FUNC102_IN_INV_SEL_M (GPIO_FUNC102_IN_INV_SEL_V << GPIO_FUNC102_IN_INV_SEL_S) #define GPIO_FUNC102_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC102_IN_INV_SEL_S 5 /** GPIO_SIG102_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG102_IN_SEL (BIT(6)) #define GPIO_SIG102_IN_SEL_M (GPIO_SIG102_IN_SEL_V << GPIO_SIG102_IN_SEL_S) #define GPIO_SIG102_IN_SEL_V 0x00000001U #define GPIO_SIG102_IN_SEL_S 6 /** GPIO_FUNC103_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC103_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2f0) /** GPIO_FUNC103_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC103_IN_SEL 0x0000001FU #define GPIO_FUNC103_IN_SEL_M (GPIO_FUNC103_IN_SEL_V << GPIO_FUNC103_IN_SEL_S) #define GPIO_FUNC103_IN_SEL_V 0x0000001FU #define GPIO_FUNC103_IN_SEL_S 0 /** GPIO_FUNC103_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC103_IN_INV_SEL (BIT(5)) #define GPIO_FUNC103_IN_INV_SEL_M (GPIO_FUNC103_IN_INV_SEL_V << GPIO_FUNC103_IN_INV_SEL_S) #define GPIO_FUNC103_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC103_IN_INV_SEL_S 5 /** GPIO_SIG103_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG103_IN_SEL (BIT(6)) #define GPIO_SIG103_IN_SEL_M (GPIO_SIG103_IN_SEL_V << GPIO_SIG103_IN_SEL_S) #define GPIO_SIG103_IN_SEL_V 0x00000001U #define GPIO_SIG103_IN_SEL_S 6 /** GPIO_FUNC104_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC104_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2f4) /** GPIO_FUNC104_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC104_IN_SEL 0x0000001FU #define GPIO_FUNC104_IN_SEL_M (GPIO_FUNC104_IN_SEL_V << GPIO_FUNC104_IN_SEL_S) #define GPIO_FUNC104_IN_SEL_V 0x0000001FU #define GPIO_FUNC104_IN_SEL_S 0 /** GPIO_FUNC104_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC104_IN_INV_SEL (BIT(5)) #define GPIO_FUNC104_IN_INV_SEL_M (GPIO_FUNC104_IN_INV_SEL_V << GPIO_FUNC104_IN_INV_SEL_S) #define GPIO_FUNC104_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC104_IN_INV_SEL_S 5 /** GPIO_SIG104_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG104_IN_SEL (BIT(6)) #define GPIO_SIG104_IN_SEL_M (GPIO_SIG104_IN_SEL_V << GPIO_SIG104_IN_SEL_S) #define GPIO_SIG104_IN_SEL_V 0x00000001U #define GPIO_SIG104_IN_SEL_S 6 /** GPIO_FUNC105_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC105_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2f8) /** GPIO_FUNC105_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC105_IN_SEL 0x0000001FU #define GPIO_FUNC105_IN_SEL_M (GPIO_FUNC105_IN_SEL_V << GPIO_FUNC105_IN_SEL_S) #define GPIO_FUNC105_IN_SEL_V 0x0000001FU #define GPIO_FUNC105_IN_SEL_S 0 /** GPIO_FUNC105_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC105_IN_INV_SEL (BIT(5)) #define GPIO_FUNC105_IN_INV_SEL_M (GPIO_FUNC105_IN_INV_SEL_V << GPIO_FUNC105_IN_INV_SEL_S) #define GPIO_FUNC105_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC105_IN_INV_SEL_S 5 /** GPIO_SIG105_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG105_IN_SEL (BIT(6)) #define GPIO_SIG105_IN_SEL_M (GPIO_SIG105_IN_SEL_V << GPIO_SIG105_IN_SEL_S) #define GPIO_SIG105_IN_SEL_V 0x00000001U #define GPIO_SIG105_IN_SEL_S 6 /** GPIO_FUNC106_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC106_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x2fc) /** GPIO_FUNC106_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC106_IN_SEL 0x0000001FU #define GPIO_FUNC106_IN_SEL_M (GPIO_FUNC106_IN_SEL_V << GPIO_FUNC106_IN_SEL_S) #define GPIO_FUNC106_IN_SEL_V 0x0000001FU #define GPIO_FUNC106_IN_SEL_S 0 /** GPIO_FUNC106_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC106_IN_INV_SEL (BIT(5)) #define GPIO_FUNC106_IN_INV_SEL_M (GPIO_FUNC106_IN_INV_SEL_V << GPIO_FUNC106_IN_INV_SEL_S) #define GPIO_FUNC106_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC106_IN_INV_SEL_S 5 /** GPIO_SIG106_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG106_IN_SEL (BIT(6)) #define GPIO_SIG106_IN_SEL_M (GPIO_SIG106_IN_SEL_V << GPIO_SIG106_IN_SEL_S) #define GPIO_SIG106_IN_SEL_V 0x00000001U #define GPIO_SIG106_IN_SEL_S 6 /** GPIO_FUNC107_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC107_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x300) /** GPIO_FUNC107_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC107_IN_SEL 0x0000001FU #define GPIO_FUNC107_IN_SEL_M (GPIO_FUNC107_IN_SEL_V << GPIO_FUNC107_IN_SEL_S) #define GPIO_FUNC107_IN_SEL_V 0x0000001FU #define GPIO_FUNC107_IN_SEL_S 0 /** GPIO_FUNC107_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC107_IN_INV_SEL (BIT(5)) #define GPIO_FUNC107_IN_INV_SEL_M (GPIO_FUNC107_IN_INV_SEL_V << GPIO_FUNC107_IN_INV_SEL_S) #define GPIO_FUNC107_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC107_IN_INV_SEL_S 5 /** GPIO_SIG107_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG107_IN_SEL (BIT(6)) #define GPIO_SIG107_IN_SEL_M (GPIO_SIG107_IN_SEL_V << GPIO_SIG107_IN_SEL_S) #define GPIO_SIG107_IN_SEL_V 0x00000001U #define GPIO_SIG107_IN_SEL_S 6 /** GPIO_FUNC108_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC108_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x304) /** GPIO_FUNC108_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC108_IN_SEL 0x0000001FU #define GPIO_FUNC108_IN_SEL_M (GPIO_FUNC108_IN_SEL_V << GPIO_FUNC108_IN_SEL_S) #define GPIO_FUNC108_IN_SEL_V 0x0000001FU #define GPIO_FUNC108_IN_SEL_S 0 /** GPIO_FUNC108_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC108_IN_INV_SEL (BIT(5)) #define GPIO_FUNC108_IN_INV_SEL_M (GPIO_FUNC108_IN_INV_SEL_V << GPIO_FUNC108_IN_INV_SEL_S) #define GPIO_FUNC108_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC108_IN_INV_SEL_S 5 /** GPIO_SIG108_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG108_IN_SEL (BIT(6)) #define GPIO_SIG108_IN_SEL_M (GPIO_SIG108_IN_SEL_V << GPIO_SIG108_IN_SEL_S) #define GPIO_SIG108_IN_SEL_V 0x00000001U #define GPIO_SIG108_IN_SEL_S 6 /** GPIO_FUNC109_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC109_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x308) /** GPIO_FUNC109_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC109_IN_SEL 0x0000001FU #define GPIO_FUNC109_IN_SEL_M (GPIO_FUNC109_IN_SEL_V << GPIO_FUNC109_IN_SEL_S) #define GPIO_FUNC109_IN_SEL_V 0x0000001FU #define GPIO_FUNC109_IN_SEL_S 0 /** GPIO_FUNC109_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC109_IN_INV_SEL (BIT(5)) #define GPIO_FUNC109_IN_INV_SEL_M (GPIO_FUNC109_IN_INV_SEL_V << GPIO_FUNC109_IN_INV_SEL_S) #define GPIO_FUNC109_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC109_IN_INV_SEL_S 5 /** GPIO_SIG109_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG109_IN_SEL (BIT(6)) #define GPIO_SIG109_IN_SEL_M (GPIO_SIG109_IN_SEL_V << GPIO_SIG109_IN_SEL_S) #define GPIO_SIG109_IN_SEL_V 0x00000001U #define GPIO_SIG109_IN_SEL_S 6 /** GPIO_FUNC110_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC110_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x30c) /** GPIO_FUNC110_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC110_IN_SEL 0x0000001FU #define GPIO_FUNC110_IN_SEL_M (GPIO_FUNC110_IN_SEL_V << GPIO_FUNC110_IN_SEL_S) #define GPIO_FUNC110_IN_SEL_V 0x0000001FU #define GPIO_FUNC110_IN_SEL_S 0 /** GPIO_FUNC110_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC110_IN_INV_SEL (BIT(5)) #define GPIO_FUNC110_IN_INV_SEL_M (GPIO_FUNC110_IN_INV_SEL_V << GPIO_FUNC110_IN_INV_SEL_S) #define GPIO_FUNC110_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC110_IN_INV_SEL_S 5 /** GPIO_SIG110_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG110_IN_SEL (BIT(6)) #define GPIO_SIG110_IN_SEL_M (GPIO_SIG110_IN_SEL_V << GPIO_SIG110_IN_SEL_S) #define GPIO_SIG110_IN_SEL_V 0x00000001U #define GPIO_SIG110_IN_SEL_S 6 /** GPIO_FUNC111_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC111_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x310) /** GPIO_FUNC111_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC111_IN_SEL 0x0000001FU #define GPIO_FUNC111_IN_SEL_M (GPIO_FUNC111_IN_SEL_V << GPIO_FUNC111_IN_SEL_S) #define GPIO_FUNC111_IN_SEL_V 0x0000001FU #define GPIO_FUNC111_IN_SEL_S 0 /** GPIO_FUNC111_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC111_IN_INV_SEL (BIT(5)) #define GPIO_FUNC111_IN_INV_SEL_M (GPIO_FUNC111_IN_INV_SEL_V << GPIO_FUNC111_IN_INV_SEL_S) #define GPIO_FUNC111_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC111_IN_INV_SEL_S 5 /** GPIO_SIG111_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG111_IN_SEL (BIT(6)) #define GPIO_SIG111_IN_SEL_M (GPIO_SIG111_IN_SEL_V << GPIO_SIG111_IN_SEL_S) #define GPIO_SIG111_IN_SEL_V 0x00000001U #define GPIO_SIG111_IN_SEL_S 6 /** GPIO_FUNC112_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC112_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x314) /** GPIO_FUNC112_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC112_IN_SEL 0x0000001FU #define GPIO_FUNC112_IN_SEL_M (GPIO_FUNC112_IN_SEL_V << GPIO_FUNC112_IN_SEL_S) #define GPIO_FUNC112_IN_SEL_V 0x0000001FU #define GPIO_FUNC112_IN_SEL_S 0 /** GPIO_FUNC112_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC112_IN_INV_SEL (BIT(5)) #define GPIO_FUNC112_IN_INV_SEL_M (GPIO_FUNC112_IN_INV_SEL_V << GPIO_FUNC112_IN_INV_SEL_S) #define GPIO_FUNC112_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC112_IN_INV_SEL_S 5 /** GPIO_SIG112_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG112_IN_SEL (BIT(6)) #define GPIO_SIG112_IN_SEL_M (GPIO_SIG112_IN_SEL_V << GPIO_SIG112_IN_SEL_S) #define GPIO_SIG112_IN_SEL_V 0x00000001U #define GPIO_SIG112_IN_SEL_S 6 /** GPIO_FUNC113_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC113_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x318) /** GPIO_FUNC113_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC113_IN_SEL 0x0000001FU #define GPIO_FUNC113_IN_SEL_M (GPIO_FUNC113_IN_SEL_V << GPIO_FUNC113_IN_SEL_S) #define GPIO_FUNC113_IN_SEL_V 0x0000001FU #define GPIO_FUNC113_IN_SEL_S 0 /** GPIO_FUNC113_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC113_IN_INV_SEL (BIT(5)) #define GPIO_FUNC113_IN_INV_SEL_M (GPIO_FUNC113_IN_INV_SEL_V << GPIO_FUNC113_IN_INV_SEL_S) #define GPIO_FUNC113_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC113_IN_INV_SEL_S 5 /** GPIO_SIG113_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG113_IN_SEL (BIT(6)) #define GPIO_SIG113_IN_SEL_M (GPIO_SIG113_IN_SEL_V << GPIO_SIG113_IN_SEL_S) #define GPIO_SIG113_IN_SEL_V 0x00000001U #define GPIO_SIG113_IN_SEL_S 6 /** GPIO_FUNC114_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC114_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x31c) /** GPIO_FUNC114_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC114_IN_SEL 0x0000001FU #define GPIO_FUNC114_IN_SEL_M (GPIO_FUNC114_IN_SEL_V << GPIO_FUNC114_IN_SEL_S) #define GPIO_FUNC114_IN_SEL_V 0x0000001FU #define GPIO_FUNC114_IN_SEL_S 0 /** GPIO_FUNC114_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC114_IN_INV_SEL (BIT(5)) #define GPIO_FUNC114_IN_INV_SEL_M (GPIO_FUNC114_IN_INV_SEL_V << GPIO_FUNC114_IN_INV_SEL_S) #define GPIO_FUNC114_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC114_IN_INV_SEL_S 5 /** GPIO_SIG114_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG114_IN_SEL (BIT(6)) #define GPIO_SIG114_IN_SEL_M (GPIO_SIG114_IN_SEL_V << GPIO_SIG114_IN_SEL_S) #define GPIO_SIG114_IN_SEL_V 0x00000001U #define GPIO_SIG114_IN_SEL_S 6 /** GPIO_FUNC115_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC115_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x320) /** GPIO_FUNC115_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC115_IN_SEL 0x0000001FU #define GPIO_FUNC115_IN_SEL_M (GPIO_FUNC115_IN_SEL_V << GPIO_FUNC115_IN_SEL_S) #define GPIO_FUNC115_IN_SEL_V 0x0000001FU #define GPIO_FUNC115_IN_SEL_S 0 /** GPIO_FUNC115_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC115_IN_INV_SEL (BIT(5)) #define GPIO_FUNC115_IN_INV_SEL_M (GPIO_FUNC115_IN_INV_SEL_V << GPIO_FUNC115_IN_INV_SEL_S) #define GPIO_FUNC115_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC115_IN_INV_SEL_S 5 /** GPIO_SIG115_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG115_IN_SEL (BIT(6)) #define GPIO_SIG115_IN_SEL_M (GPIO_SIG115_IN_SEL_V << GPIO_SIG115_IN_SEL_S) #define GPIO_SIG115_IN_SEL_V 0x00000001U #define GPIO_SIG115_IN_SEL_S 6 /** GPIO_FUNC116_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC116_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x324) /** GPIO_FUNC116_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC116_IN_SEL 0x0000001FU #define GPIO_FUNC116_IN_SEL_M (GPIO_FUNC116_IN_SEL_V << GPIO_FUNC116_IN_SEL_S) #define GPIO_FUNC116_IN_SEL_V 0x0000001FU #define GPIO_FUNC116_IN_SEL_S 0 /** GPIO_FUNC116_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC116_IN_INV_SEL (BIT(5)) #define GPIO_FUNC116_IN_INV_SEL_M (GPIO_FUNC116_IN_INV_SEL_V << GPIO_FUNC116_IN_INV_SEL_S) #define GPIO_FUNC116_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC116_IN_INV_SEL_S 5 /** GPIO_SIG116_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG116_IN_SEL (BIT(6)) #define GPIO_SIG116_IN_SEL_M (GPIO_SIG116_IN_SEL_V << GPIO_SIG116_IN_SEL_S) #define GPIO_SIG116_IN_SEL_V 0x00000001U #define GPIO_SIG116_IN_SEL_S 6 /** GPIO_FUNC117_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC117_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x328) /** GPIO_FUNC117_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC117_IN_SEL 0x0000001FU #define GPIO_FUNC117_IN_SEL_M (GPIO_FUNC117_IN_SEL_V << GPIO_FUNC117_IN_SEL_S) #define GPIO_FUNC117_IN_SEL_V 0x0000001FU #define GPIO_FUNC117_IN_SEL_S 0 /** GPIO_FUNC117_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC117_IN_INV_SEL (BIT(5)) #define GPIO_FUNC117_IN_INV_SEL_M (GPIO_FUNC117_IN_INV_SEL_V << GPIO_FUNC117_IN_INV_SEL_S) #define GPIO_FUNC117_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC117_IN_INV_SEL_S 5 /** GPIO_SIG117_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG117_IN_SEL (BIT(6)) #define GPIO_SIG117_IN_SEL_M (GPIO_SIG117_IN_SEL_V << GPIO_SIG117_IN_SEL_S) #define GPIO_SIG117_IN_SEL_V 0x00000001U #define GPIO_SIG117_IN_SEL_S 6 /** GPIO_FUNC118_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC118_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x32c) /** GPIO_FUNC118_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC118_IN_SEL 0x0000001FU #define GPIO_FUNC118_IN_SEL_M (GPIO_FUNC118_IN_SEL_V << GPIO_FUNC118_IN_SEL_S) #define GPIO_FUNC118_IN_SEL_V 0x0000001FU #define GPIO_FUNC118_IN_SEL_S 0 /** GPIO_FUNC118_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC118_IN_INV_SEL (BIT(5)) #define GPIO_FUNC118_IN_INV_SEL_M (GPIO_FUNC118_IN_INV_SEL_V << GPIO_FUNC118_IN_INV_SEL_S) #define GPIO_FUNC118_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC118_IN_INV_SEL_S 5 /** GPIO_SIG118_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG118_IN_SEL (BIT(6)) #define GPIO_SIG118_IN_SEL_M (GPIO_SIG118_IN_SEL_V << GPIO_SIG118_IN_SEL_S) #define GPIO_SIG118_IN_SEL_V 0x00000001U #define GPIO_SIG118_IN_SEL_S 6 /** GPIO_FUNC119_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC119_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x330) /** GPIO_FUNC119_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC119_IN_SEL 0x0000001FU #define GPIO_FUNC119_IN_SEL_M (GPIO_FUNC119_IN_SEL_V << GPIO_FUNC119_IN_SEL_S) #define GPIO_FUNC119_IN_SEL_V 0x0000001FU #define GPIO_FUNC119_IN_SEL_S 0 /** GPIO_FUNC119_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC119_IN_INV_SEL (BIT(5)) #define GPIO_FUNC119_IN_INV_SEL_M (GPIO_FUNC119_IN_INV_SEL_V << GPIO_FUNC119_IN_INV_SEL_S) #define GPIO_FUNC119_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC119_IN_INV_SEL_S 5 /** GPIO_SIG119_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG119_IN_SEL (BIT(6)) #define GPIO_SIG119_IN_SEL_M (GPIO_SIG119_IN_SEL_V << GPIO_SIG119_IN_SEL_S) #define GPIO_SIG119_IN_SEL_V 0x00000001U #define GPIO_SIG119_IN_SEL_S 6 /** GPIO_FUNC120_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC120_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x334) /** GPIO_FUNC120_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC120_IN_SEL 0x0000001FU #define GPIO_FUNC120_IN_SEL_M (GPIO_FUNC120_IN_SEL_V << GPIO_FUNC120_IN_SEL_S) #define GPIO_FUNC120_IN_SEL_V 0x0000001FU #define GPIO_FUNC120_IN_SEL_S 0 /** GPIO_FUNC120_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC120_IN_INV_SEL (BIT(5)) #define GPIO_FUNC120_IN_INV_SEL_M (GPIO_FUNC120_IN_INV_SEL_V << GPIO_FUNC120_IN_INV_SEL_S) #define GPIO_FUNC120_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC120_IN_INV_SEL_S 5 /** GPIO_SIG120_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG120_IN_SEL (BIT(6)) #define GPIO_SIG120_IN_SEL_M (GPIO_SIG120_IN_SEL_V << GPIO_SIG120_IN_SEL_S) #define GPIO_SIG120_IN_SEL_V 0x00000001U #define GPIO_SIG120_IN_SEL_S 6 /** GPIO_FUNC121_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC121_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x338) /** GPIO_FUNC121_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC121_IN_SEL 0x0000001FU #define GPIO_FUNC121_IN_SEL_M (GPIO_FUNC121_IN_SEL_V << GPIO_FUNC121_IN_SEL_S) #define GPIO_FUNC121_IN_SEL_V 0x0000001FU #define GPIO_FUNC121_IN_SEL_S 0 /** GPIO_FUNC121_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC121_IN_INV_SEL (BIT(5)) #define GPIO_FUNC121_IN_INV_SEL_M (GPIO_FUNC121_IN_INV_SEL_V << GPIO_FUNC121_IN_INV_SEL_S) #define GPIO_FUNC121_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC121_IN_INV_SEL_S 5 /** GPIO_SIG121_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG121_IN_SEL (BIT(6)) #define GPIO_SIG121_IN_SEL_M (GPIO_SIG121_IN_SEL_V << GPIO_SIG121_IN_SEL_S) #define GPIO_SIG121_IN_SEL_V 0x00000001U #define GPIO_SIG121_IN_SEL_S 6 /** GPIO_FUNC122_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC122_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x33c) /** GPIO_FUNC122_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC122_IN_SEL 0x0000001FU #define GPIO_FUNC122_IN_SEL_M (GPIO_FUNC122_IN_SEL_V << GPIO_FUNC122_IN_SEL_S) #define GPIO_FUNC122_IN_SEL_V 0x0000001FU #define GPIO_FUNC122_IN_SEL_S 0 /** GPIO_FUNC122_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC122_IN_INV_SEL (BIT(5)) #define GPIO_FUNC122_IN_INV_SEL_M (GPIO_FUNC122_IN_INV_SEL_V << GPIO_FUNC122_IN_INV_SEL_S) #define GPIO_FUNC122_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC122_IN_INV_SEL_S 5 /** GPIO_SIG122_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG122_IN_SEL (BIT(6)) #define GPIO_SIG122_IN_SEL_M (GPIO_SIG122_IN_SEL_V << GPIO_SIG122_IN_SEL_S) #define GPIO_SIG122_IN_SEL_V 0x00000001U #define GPIO_SIG122_IN_SEL_S 6 /** GPIO_FUNC123_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC123_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x340) /** GPIO_FUNC123_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC123_IN_SEL 0x0000001FU #define GPIO_FUNC123_IN_SEL_M (GPIO_FUNC123_IN_SEL_V << GPIO_FUNC123_IN_SEL_S) #define GPIO_FUNC123_IN_SEL_V 0x0000001FU #define GPIO_FUNC123_IN_SEL_S 0 /** GPIO_FUNC123_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC123_IN_INV_SEL (BIT(5)) #define GPIO_FUNC123_IN_INV_SEL_M (GPIO_FUNC123_IN_INV_SEL_V << GPIO_FUNC123_IN_INV_SEL_S) #define GPIO_FUNC123_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC123_IN_INV_SEL_S 5 /** GPIO_SIG123_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG123_IN_SEL (BIT(6)) #define GPIO_SIG123_IN_SEL_M (GPIO_SIG123_IN_SEL_V << GPIO_SIG123_IN_SEL_S) #define GPIO_SIG123_IN_SEL_V 0x00000001U #define GPIO_SIG123_IN_SEL_S 6 /** GPIO_FUNC124_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC124_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x344) /** GPIO_FUNC124_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC124_IN_SEL 0x0000001FU #define GPIO_FUNC124_IN_SEL_M (GPIO_FUNC124_IN_SEL_V << GPIO_FUNC124_IN_SEL_S) #define GPIO_FUNC124_IN_SEL_V 0x0000001FU #define GPIO_FUNC124_IN_SEL_S 0 /** GPIO_FUNC124_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC124_IN_INV_SEL (BIT(5)) #define GPIO_FUNC124_IN_INV_SEL_M (GPIO_FUNC124_IN_INV_SEL_V << GPIO_FUNC124_IN_INV_SEL_S) #define GPIO_FUNC124_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC124_IN_INV_SEL_S 5 /** GPIO_SIG124_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG124_IN_SEL (BIT(6)) #define GPIO_SIG124_IN_SEL_M (GPIO_SIG124_IN_SEL_V << GPIO_SIG124_IN_SEL_S) #define GPIO_SIG124_IN_SEL_V 0x00000001U #define GPIO_SIG124_IN_SEL_S 6 /** GPIO_FUNC125_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC125_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x348) /** GPIO_FUNC125_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC125_IN_SEL 0x0000001FU #define GPIO_FUNC125_IN_SEL_M (GPIO_FUNC125_IN_SEL_V << GPIO_FUNC125_IN_SEL_S) #define GPIO_FUNC125_IN_SEL_V 0x0000001FU #define GPIO_FUNC125_IN_SEL_S 0 /** GPIO_FUNC125_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC125_IN_INV_SEL (BIT(5)) #define GPIO_FUNC125_IN_INV_SEL_M (GPIO_FUNC125_IN_INV_SEL_V << GPIO_FUNC125_IN_INV_SEL_S) #define GPIO_FUNC125_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC125_IN_INV_SEL_S 5 /** GPIO_SIG125_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG125_IN_SEL (BIT(6)) #define GPIO_SIG125_IN_SEL_M (GPIO_SIG125_IN_SEL_V << GPIO_SIG125_IN_SEL_S) #define GPIO_SIG125_IN_SEL_V 0x00000001U #define GPIO_SIG125_IN_SEL_S 6 /** GPIO_FUNC126_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC126_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x34c) /** GPIO_FUNC126_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC126_IN_SEL 0x0000001FU #define GPIO_FUNC126_IN_SEL_M (GPIO_FUNC126_IN_SEL_V << GPIO_FUNC126_IN_SEL_S) #define GPIO_FUNC126_IN_SEL_V 0x0000001FU #define GPIO_FUNC126_IN_SEL_S 0 /** GPIO_FUNC126_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC126_IN_INV_SEL (BIT(5)) #define GPIO_FUNC126_IN_INV_SEL_M (GPIO_FUNC126_IN_INV_SEL_V << GPIO_FUNC126_IN_INV_SEL_S) #define GPIO_FUNC126_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC126_IN_INV_SEL_S 5 /** GPIO_SIG126_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG126_IN_SEL (BIT(6)) #define GPIO_SIG126_IN_SEL_M (GPIO_SIG126_IN_SEL_V << GPIO_SIG126_IN_SEL_S) #define GPIO_SIG126_IN_SEL_V 0x00000001U #define GPIO_SIG126_IN_SEL_S 6 /** GPIO_FUNC127_IN_SEL_CFG_REG register * GPIO input function configuration register */ #define GPIO_FUNC127_IN_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x350) /** GPIO_FUNC127_IN_SEL : R/W; bitpos: [4:0]; default: 0; * set this value: s=0-53: connect GPIO[s] to this port. s=0x38: set this port always * high level. s=0x3C: set this port always low level. */ #define GPIO_FUNC127_IN_SEL 0x0000001FU #define GPIO_FUNC127_IN_SEL_M (GPIO_FUNC127_IN_SEL_V << GPIO_FUNC127_IN_SEL_S) #define GPIO_FUNC127_IN_SEL_V 0x0000001FU #define GPIO_FUNC127_IN_SEL_S 0 /** GPIO_FUNC127_IN_INV_SEL : R/W; bitpos: [5]; default: 0; * set this bit to invert input signal. 1:invert. 0:not invert. */ #define GPIO_FUNC127_IN_INV_SEL (BIT(5)) #define GPIO_FUNC127_IN_INV_SEL_M (GPIO_FUNC127_IN_INV_SEL_V << GPIO_FUNC127_IN_INV_SEL_S) #define GPIO_FUNC127_IN_INV_SEL_V 0x00000001U #define GPIO_FUNC127_IN_INV_SEL_S 5 /** GPIO_SIG127_IN_SEL : R/W; bitpos: [6]; default: 0; * set this bit to bypass GPIO. 1:do not bypass GPIO. 0:bypass GPIO. */ #define GPIO_SIG127_IN_SEL (BIT(6)) #define GPIO_SIG127_IN_SEL_M (GPIO_SIG127_IN_SEL_V << GPIO_SIG127_IN_SEL_S) #define GPIO_SIG127_IN_SEL_V 0x00000001U #define GPIO_SIG127_IN_SEL_S 6 /** GPIO_FUNC0_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC0_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x554) /** GPIO_FUNC0_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC0_OUT_SEL 0x000000FFU #define GPIO_FUNC0_OUT_SEL_M (GPIO_FUNC0_OUT_SEL_V << GPIO_FUNC0_OUT_SEL_S) #define GPIO_FUNC0_OUT_SEL_V 0x000000FFU #define GPIO_FUNC0_OUT_SEL_S 0 /** GPIO_FUNC0_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC0_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC0_OUT_INV_SEL_M (GPIO_FUNC0_OUT_INV_SEL_V << GPIO_FUNC0_OUT_INV_SEL_S) #define GPIO_FUNC0_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC0_OUT_INV_SEL_S 8 /** GPIO_FUNC0_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC0_OEN_SEL (BIT(9)) #define GPIO_FUNC0_OEN_SEL_M (GPIO_FUNC0_OEN_SEL_V << GPIO_FUNC0_OEN_SEL_S) #define GPIO_FUNC0_OEN_SEL_V 0x00000001U #define GPIO_FUNC0_OEN_SEL_S 9 /** GPIO_FUNC0_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC0_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC0_OEN_INV_SEL_M (GPIO_FUNC0_OEN_INV_SEL_V << GPIO_FUNC0_OEN_INV_SEL_S) #define GPIO_FUNC0_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC0_OEN_INV_SEL_S 10 /** GPIO_FUNC1_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC1_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x558) /** GPIO_FUNC1_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC1_OUT_SEL 0x000000FFU #define GPIO_FUNC1_OUT_SEL_M (GPIO_FUNC1_OUT_SEL_V << GPIO_FUNC1_OUT_SEL_S) #define GPIO_FUNC1_OUT_SEL_V 0x000000FFU #define GPIO_FUNC1_OUT_SEL_S 0 /** GPIO_FUNC1_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC1_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC1_OUT_INV_SEL_M (GPIO_FUNC1_OUT_INV_SEL_V << GPIO_FUNC1_OUT_INV_SEL_S) #define GPIO_FUNC1_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC1_OUT_INV_SEL_S 8 /** GPIO_FUNC1_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC1_OEN_SEL (BIT(9)) #define GPIO_FUNC1_OEN_SEL_M (GPIO_FUNC1_OEN_SEL_V << GPIO_FUNC1_OEN_SEL_S) #define GPIO_FUNC1_OEN_SEL_V 0x00000001U #define GPIO_FUNC1_OEN_SEL_S 9 /** GPIO_FUNC1_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC1_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC1_OEN_INV_SEL_M (GPIO_FUNC1_OEN_INV_SEL_V << GPIO_FUNC1_OEN_INV_SEL_S) #define GPIO_FUNC1_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC1_OEN_INV_SEL_S 10 /** GPIO_FUNC2_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC2_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x55c) /** GPIO_FUNC2_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC2_OUT_SEL 0x000000FFU #define GPIO_FUNC2_OUT_SEL_M (GPIO_FUNC2_OUT_SEL_V << GPIO_FUNC2_OUT_SEL_S) #define GPIO_FUNC2_OUT_SEL_V 0x000000FFU #define GPIO_FUNC2_OUT_SEL_S 0 /** GPIO_FUNC2_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC2_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC2_OUT_INV_SEL_M (GPIO_FUNC2_OUT_INV_SEL_V << GPIO_FUNC2_OUT_INV_SEL_S) #define GPIO_FUNC2_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC2_OUT_INV_SEL_S 8 /** GPIO_FUNC2_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC2_OEN_SEL (BIT(9)) #define GPIO_FUNC2_OEN_SEL_M (GPIO_FUNC2_OEN_SEL_V << GPIO_FUNC2_OEN_SEL_S) #define GPIO_FUNC2_OEN_SEL_V 0x00000001U #define GPIO_FUNC2_OEN_SEL_S 9 /** GPIO_FUNC2_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC2_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC2_OEN_INV_SEL_M (GPIO_FUNC2_OEN_INV_SEL_V << GPIO_FUNC2_OEN_INV_SEL_S) #define GPIO_FUNC2_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC2_OEN_INV_SEL_S 10 /** GPIO_FUNC3_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC3_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x560) /** GPIO_FUNC3_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC3_OUT_SEL 0x000000FFU #define GPIO_FUNC3_OUT_SEL_M (GPIO_FUNC3_OUT_SEL_V << GPIO_FUNC3_OUT_SEL_S) #define GPIO_FUNC3_OUT_SEL_V 0x000000FFU #define GPIO_FUNC3_OUT_SEL_S 0 /** GPIO_FUNC3_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC3_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC3_OUT_INV_SEL_M (GPIO_FUNC3_OUT_INV_SEL_V << GPIO_FUNC3_OUT_INV_SEL_S) #define GPIO_FUNC3_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC3_OUT_INV_SEL_S 8 /** GPIO_FUNC3_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC3_OEN_SEL (BIT(9)) #define GPIO_FUNC3_OEN_SEL_M (GPIO_FUNC3_OEN_SEL_V << GPIO_FUNC3_OEN_SEL_S) #define GPIO_FUNC3_OEN_SEL_V 0x00000001U #define GPIO_FUNC3_OEN_SEL_S 9 /** GPIO_FUNC3_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC3_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC3_OEN_INV_SEL_M (GPIO_FUNC3_OEN_INV_SEL_V << GPIO_FUNC3_OEN_INV_SEL_S) #define GPIO_FUNC3_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC3_OEN_INV_SEL_S 10 /** GPIO_FUNC4_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC4_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x564) /** GPIO_FUNC4_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC4_OUT_SEL 0x000000FFU #define GPIO_FUNC4_OUT_SEL_M (GPIO_FUNC4_OUT_SEL_V << GPIO_FUNC4_OUT_SEL_S) #define GPIO_FUNC4_OUT_SEL_V 0x000000FFU #define GPIO_FUNC4_OUT_SEL_S 0 /** GPIO_FUNC4_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC4_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC4_OUT_INV_SEL_M (GPIO_FUNC4_OUT_INV_SEL_V << GPIO_FUNC4_OUT_INV_SEL_S) #define GPIO_FUNC4_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC4_OUT_INV_SEL_S 8 /** GPIO_FUNC4_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC4_OEN_SEL (BIT(9)) #define GPIO_FUNC4_OEN_SEL_M (GPIO_FUNC4_OEN_SEL_V << GPIO_FUNC4_OEN_SEL_S) #define GPIO_FUNC4_OEN_SEL_V 0x00000001U #define GPIO_FUNC4_OEN_SEL_S 9 /** GPIO_FUNC4_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC4_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC4_OEN_INV_SEL_M (GPIO_FUNC4_OEN_INV_SEL_V << GPIO_FUNC4_OEN_INV_SEL_S) #define GPIO_FUNC4_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC4_OEN_INV_SEL_S 10 /** GPIO_FUNC5_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC5_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x568) /** GPIO_FUNC5_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC5_OUT_SEL 0x000000FFU #define GPIO_FUNC5_OUT_SEL_M (GPIO_FUNC5_OUT_SEL_V << GPIO_FUNC5_OUT_SEL_S) #define GPIO_FUNC5_OUT_SEL_V 0x000000FFU #define GPIO_FUNC5_OUT_SEL_S 0 /** GPIO_FUNC5_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC5_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC5_OUT_INV_SEL_M (GPIO_FUNC5_OUT_INV_SEL_V << GPIO_FUNC5_OUT_INV_SEL_S) #define GPIO_FUNC5_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC5_OUT_INV_SEL_S 8 /** GPIO_FUNC5_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC5_OEN_SEL (BIT(9)) #define GPIO_FUNC5_OEN_SEL_M (GPIO_FUNC5_OEN_SEL_V << GPIO_FUNC5_OEN_SEL_S) #define GPIO_FUNC5_OEN_SEL_V 0x00000001U #define GPIO_FUNC5_OEN_SEL_S 9 /** GPIO_FUNC5_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC5_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC5_OEN_INV_SEL_M (GPIO_FUNC5_OEN_INV_SEL_V << GPIO_FUNC5_OEN_INV_SEL_S) #define GPIO_FUNC5_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC5_OEN_INV_SEL_S 10 /** GPIO_FUNC6_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC6_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x56c) /** GPIO_FUNC6_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC6_OUT_SEL 0x000000FFU #define GPIO_FUNC6_OUT_SEL_M (GPIO_FUNC6_OUT_SEL_V << GPIO_FUNC6_OUT_SEL_S) #define GPIO_FUNC6_OUT_SEL_V 0x000000FFU #define GPIO_FUNC6_OUT_SEL_S 0 /** GPIO_FUNC6_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC6_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC6_OUT_INV_SEL_M (GPIO_FUNC6_OUT_INV_SEL_V << GPIO_FUNC6_OUT_INV_SEL_S) #define GPIO_FUNC6_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC6_OUT_INV_SEL_S 8 /** GPIO_FUNC6_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC6_OEN_SEL (BIT(9)) #define GPIO_FUNC6_OEN_SEL_M (GPIO_FUNC6_OEN_SEL_V << GPIO_FUNC6_OEN_SEL_S) #define GPIO_FUNC6_OEN_SEL_V 0x00000001U #define GPIO_FUNC6_OEN_SEL_S 9 /** GPIO_FUNC6_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC6_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC6_OEN_INV_SEL_M (GPIO_FUNC6_OEN_INV_SEL_V << GPIO_FUNC6_OEN_INV_SEL_S) #define GPIO_FUNC6_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC6_OEN_INV_SEL_S 10 /** GPIO_FUNC7_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC7_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x570) /** GPIO_FUNC7_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC7_OUT_SEL 0x000000FFU #define GPIO_FUNC7_OUT_SEL_M (GPIO_FUNC7_OUT_SEL_V << GPIO_FUNC7_OUT_SEL_S) #define GPIO_FUNC7_OUT_SEL_V 0x000000FFU #define GPIO_FUNC7_OUT_SEL_S 0 /** GPIO_FUNC7_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC7_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC7_OUT_INV_SEL_M (GPIO_FUNC7_OUT_INV_SEL_V << GPIO_FUNC7_OUT_INV_SEL_S) #define GPIO_FUNC7_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC7_OUT_INV_SEL_S 8 /** GPIO_FUNC7_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC7_OEN_SEL (BIT(9)) #define GPIO_FUNC7_OEN_SEL_M (GPIO_FUNC7_OEN_SEL_V << GPIO_FUNC7_OEN_SEL_S) #define GPIO_FUNC7_OEN_SEL_V 0x00000001U #define GPIO_FUNC7_OEN_SEL_S 9 /** GPIO_FUNC7_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC7_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC7_OEN_INV_SEL_M (GPIO_FUNC7_OEN_INV_SEL_V << GPIO_FUNC7_OEN_INV_SEL_S) #define GPIO_FUNC7_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC7_OEN_INV_SEL_S 10 /** GPIO_FUNC8_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC8_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x574) /** GPIO_FUNC8_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC8_OUT_SEL 0x000000FFU #define GPIO_FUNC8_OUT_SEL_M (GPIO_FUNC8_OUT_SEL_V << GPIO_FUNC8_OUT_SEL_S) #define GPIO_FUNC8_OUT_SEL_V 0x000000FFU #define GPIO_FUNC8_OUT_SEL_S 0 /** GPIO_FUNC8_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC8_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC8_OUT_INV_SEL_M (GPIO_FUNC8_OUT_INV_SEL_V << GPIO_FUNC8_OUT_INV_SEL_S) #define GPIO_FUNC8_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC8_OUT_INV_SEL_S 8 /** GPIO_FUNC8_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC8_OEN_SEL (BIT(9)) #define GPIO_FUNC8_OEN_SEL_M (GPIO_FUNC8_OEN_SEL_V << GPIO_FUNC8_OEN_SEL_S) #define GPIO_FUNC8_OEN_SEL_V 0x00000001U #define GPIO_FUNC8_OEN_SEL_S 9 /** GPIO_FUNC8_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC8_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC8_OEN_INV_SEL_M (GPIO_FUNC8_OEN_INV_SEL_V << GPIO_FUNC8_OEN_INV_SEL_S) #define GPIO_FUNC8_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC8_OEN_INV_SEL_S 10 /** GPIO_FUNC9_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC9_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x578) /** GPIO_FUNC9_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC9_OUT_SEL 0x000000FFU #define GPIO_FUNC9_OUT_SEL_M (GPIO_FUNC9_OUT_SEL_V << GPIO_FUNC9_OUT_SEL_S) #define GPIO_FUNC9_OUT_SEL_V 0x000000FFU #define GPIO_FUNC9_OUT_SEL_S 0 /** GPIO_FUNC9_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC9_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC9_OUT_INV_SEL_M (GPIO_FUNC9_OUT_INV_SEL_V << GPIO_FUNC9_OUT_INV_SEL_S) #define GPIO_FUNC9_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC9_OUT_INV_SEL_S 8 /** GPIO_FUNC9_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC9_OEN_SEL (BIT(9)) #define GPIO_FUNC9_OEN_SEL_M (GPIO_FUNC9_OEN_SEL_V << GPIO_FUNC9_OEN_SEL_S) #define GPIO_FUNC9_OEN_SEL_V 0x00000001U #define GPIO_FUNC9_OEN_SEL_S 9 /** GPIO_FUNC9_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC9_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC9_OEN_INV_SEL_M (GPIO_FUNC9_OEN_INV_SEL_V << GPIO_FUNC9_OEN_INV_SEL_S) #define GPIO_FUNC9_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC9_OEN_INV_SEL_S 10 /** GPIO_FUNC10_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC10_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x57c) /** GPIO_FUNC10_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC10_OUT_SEL 0x000000FFU #define GPIO_FUNC10_OUT_SEL_M (GPIO_FUNC10_OUT_SEL_V << GPIO_FUNC10_OUT_SEL_S) #define GPIO_FUNC10_OUT_SEL_V 0x000000FFU #define GPIO_FUNC10_OUT_SEL_S 0 /** GPIO_FUNC10_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC10_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC10_OUT_INV_SEL_M (GPIO_FUNC10_OUT_INV_SEL_V << GPIO_FUNC10_OUT_INV_SEL_S) #define GPIO_FUNC10_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC10_OUT_INV_SEL_S 8 /** GPIO_FUNC10_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC10_OEN_SEL (BIT(9)) #define GPIO_FUNC10_OEN_SEL_M (GPIO_FUNC10_OEN_SEL_V << GPIO_FUNC10_OEN_SEL_S) #define GPIO_FUNC10_OEN_SEL_V 0x00000001U #define GPIO_FUNC10_OEN_SEL_S 9 /** GPIO_FUNC10_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC10_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC10_OEN_INV_SEL_M (GPIO_FUNC10_OEN_INV_SEL_V << GPIO_FUNC10_OEN_INV_SEL_S) #define GPIO_FUNC10_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC10_OEN_INV_SEL_S 10 /** GPIO_FUNC11_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC11_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x580) /** GPIO_FUNC11_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC11_OUT_SEL 0x000000FFU #define GPIO_FUNC11_OUT_SEL_M (GPIO_FUNC11_OUT_SEL_V << GPIO_FUNC11_OUT_SEL_S) #define GPIO_FUNC11_OUT_SEL_V 0x000000FFU #define GPIO_FUNC11_OUT_SEL_S 0 /** GPIO_FUNC11_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC11_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC11_OUT_INV_SEL_M (GPIO_FUNC11_OUT_INV_SEL_V << GPIO_FUNC11_OUT_INV_SEL_S) #define GPIO_FUNC11_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC11_OUT_INV_SEL_S 8 /** GPIO_FUNC11_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC11_OEN_SEL (BIT(9)) #define GPIO_FUNC11_OEN_SEL_M (GPIO_FUNC11_OEN_SEL_V << GPIO_FUNC11_OEN_SEL_S) #define GPIO_FUNC11_OEN_SEL_V 0x00000001U #define GPIO_FUNC11_OEN_SEL_S 9 /** GPIO_FUNC11_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC11_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC11_OEN_INV_SEL_M (GPIO_FUNC11_OEN_INV_SEL_V << GPIO_FUNC11_OEN_INV_SEL_S) #define GPIO_FUNC11_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC11_OEN_INV_SEL_S 10 /** GPIO_FUNC12_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC12_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x584) /** GPIO_FUNC12_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC12_OUT_SEL 0x000000FFU #define GPIO_FUNC12_OUT_SEL_M (GPIO_FUNC12_OUT_SEL_V << GPIO_FUNC12_OUT_SEL_S) #define GPIO_FUNC12_OUT_SEL_V 0x000000FFU #define GPIO_FUNC12_OUT_SEL_S 0 /** GPIO_FUNC12_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC12_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC12_OUT_INV_SEL_M (GPIO_FUNC12_OUT_INV_SEL_V << GPIO_FUNC12_OUT_INV_SEL_S) #define GPIO_FUNC12_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC12_OUT_INV_SEL_S 8 /** GPIO_FUNC12_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC12_OEN_SEL (BIT(9)) #define GPIO_FUNC12_OEN_SEL_M (GPIO_FUNC12_OEN_SEL_V << GPIO_FUNC12_OEN_SEL_S) #define GPIO_FUNC12_OEN_SEL_V 0x00000001U #define GPIO_FUNC12_OEN_SEL_S 9 /** GPIO_FUNC12_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC12_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC12_OEN_INV_SEL_M (GPIO_FUNC12_OEN_INV_SEL_V << GPIO_FUNC12_OEN_INV_SEL_S) #define GPIO_FUNC12_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC12_OEN_INV_SEL_S 10 /** GPIO_FUNC13_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC13_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x588) /** GPIO_FUNC13_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC13_OUT_SEL 0x000000FFU #define GPIO_FUNC13_OUT_SEL_M (GPIO_FUNC13_OUT_SEL_V << GPIO_FUNC13_OUT_SEL_S) #define GPIO_FUNC13_OUT_SEL_V 0x000000FFU #define GPIO_FUNC13_OUT_SEL_S 0 /** GPIO_FUNC13_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC13_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC13_OUT_INV_SEL_M (GPIO_FUNC13_OUT_INV_SEL_V << GPIO_FUNC13_OUT_INV_SEL_S) #define GPIO_FUNC13_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC13_OUT_INV_SEL_S 8 /** GPIO_FUNC13_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC13_OEN_SEL (BIT(9)) #define GPIO_FUNC13_OEN_SEL_M (GPIO_FUNC13_OEN_SEL_V << GPIO_FUNC13_OEN_SEL_S) #define GPIO_FUNC13_OEN_SEL_V 0x00000001U #define GPIO_FUNC13_OEN_SEL_S 9 /** GPIO_FUNC13_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC13_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC13_OEN_INV_SEL_M (GPIO_FUNC13_OEN_INV_SEL_V << GPIO_FUNC13_OEN_INV_SEL_S) #define GPIO_FUNC13_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC13_OEN_INV_SEL_S 10 /** GPIO_FUNC14_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC14_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x58c) /** GPIO_FUNC14_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC14_OUT_SEL 0x000000FFU #define GPIO_FUNC14_OUT_SEL_M (GPIO_FUNC14_OUT_SEL_V << GPIO_FUNC14_OUT_SEL_S) #define GPIO_FUNC14_OUT_SEL_V 0x000000FFU #define GPIO_FUNC14_OUT_SEL_S 0 /** GPIO_FUNC14_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC14_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC14_OUT_INV_SEL_M (GPIO_FUNC14_OUT_INV_SEL_V << GPIO_FUNC14_OUT_INV_SEL_S) #define GPIO_FUNC14_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC14_OUT_INV_SEL_S 8 /** GPIO_FUNC14_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC14_OEN_SEL (BIT(9)) #define GPIO_FUNC14_OEN_SEL_M (GPIO_FUNC14_OEN_SEL_V << GPIO_FUNC14_OEN_SEL_S) #define GPIO_FUNC14_OEN_SEL_V 0x00000001U #define GPIO_FUNC14_OEN_SEL_S 9 /** GPIO_FUNC14_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC14_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC14_OEN_INV_SEL_M (GPIO_FUNC14_OEN_INV_SEL_V << GPIO_FUNC14_OEN_INV_SEL_S) #define GPIO_FUNC14_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC14_OEN_INV_SEL_S 10 /** GPIO_FUNC15_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC15_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x590) /** GPIO_FUNC15_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC15_OUT_SEL 0x000000FFU #define GPIO_FUNC15_OUT_SEL_M (GPIO_FUNC15_OUT_SEL_V << GPIO_FUNC15_OUT_SEL_S) #define GPIO_FUNC15_OUT_SEL_V 0x000000FFU #define GPIO_FUNC15_OUT_SEL_S 0 /** GPIO_FUNC15_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC15_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC15_OUT_INV_SEL_M (GPIO_FUNC15_OUT_INV_SEL_V << GPIO_FUNC15_OUT_INV_SEL_S) #define GPIO_FUNC15_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC15_OUT_INV_SEL_S 8 /** GPIO_FUNC15_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC15_OEN_SEL (BIT(9)) #define GPIO_FUNC15_OEN_SEL_M (GPIO_FUNC15_OEN_SEL_V << GPIO_FUNC15_OEN_SEL_S) #define GPIO_FUNC15_OEN_SEL_V 0x00000001U #define GPIO_FUNC15_OEN_SEL_S 9 /** GPIO_FUNC15_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC15_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC15_OEN_INV_SEL_M (GPIO_FUNC15_OEN_INV_SEL_V << GPIO_FUNC15_OEN_INV_SEL_S) #define GPIO_FUNC15_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC15_OEN_INV_SEL_S 10 /** GPIO_FUNC16_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC16_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x594) /** GPIO_FUNC16_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC16_OUT_SEL 0x000000FFU #define GPIO_FUNC16_OUT_SEL_M (GPIO_FUNC16_OUT_SEL_V << GPIO_FUNC16_OUT_SEL_S) #define GPIO_FUNC16_OUT_SEL_V 0x000000FFU #define GPIO_FUNC16_OUT_SEL_S 0 /** GPIO_FUNC16_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC16_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC16_OUT_INV_SEL_M (GPIO_FUNC16_OUT_INV_SEL_V << GPIO_FUNC16_OUT_INV_SEL_S) #define GPIO_FUNC16_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC16_OUT_INV_SEL_S 8 /** GPIO_FUNC16_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC16_OEN_SEL (BIT(9)) #define GPIO_FUNC16_OEN_SEL_M (GPIO_FUNC16_OEN_SEL_V << GPIO_FUNC16_OEN_SEL_S) #define GPIO_FUNC16_OEN_SEL_V 0x00000001U #define GPIO_FUNC16_OEN_SEL_S 9 /** GPIO_FUNC16_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC16_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC16_OEN_INV_SEL_M (GPIO_FUNC16_OEN_INV_SEL_V << GPIO_FUNC16_OEN_INV_SEL_S) #define GPIO_FUNC16_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC16_OEN_INV_SEL_S 10 /** GPIO_FUNC17_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC17_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x598) /** GPIO_FUNC17_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC17_OUT_SEL 0x000000FFU #define GPIO_FUNC17_OUT_SEL_M (GPIO_FUNC17_OUT_SEL_V << GPIO_FUNC17_OUT_SEL_S) #define GPIO_FUNC17_OUT_SEL_V 0x000000FFU #define GPIO_FUNC17_OUT_SEL_S 0 /** GPIO_FUNC17_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC17_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC17_OUT_INV_SEL_M (GPIO_FUNC17_OUT_INV_SEL_V << GPIO_FUNC17_OUT_INV_SEL_S) #define GPIO_FUNC17_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC17_OUT_INV_SEL_S 8 /** GPIO_FUNC17_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC17_OEN_SEL (BIT(9)) #define GPIO_FUNC17_OEN_SEL_M (GPIO_FUNC17_OEN_SEL_V << GPIO_FUNC17_OEN_SEL_S) #define GPIO_FUNC17_OEN_SEL_V 0x00000001U #define GPIO_FUNC17_OEN_SEL_S 9 /** GPIO_FUNC17_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC17_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC17_OEN_INV_SEL_M (GPIO_FUNC17_OEN_INV_SEL_V << GPIO_FUNC17_OEN_INV_SEL_S) #define GPIO_FUNC17_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC17_OEN_INV_SEL_S 10 /** GPIO_FUNC18_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC18_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x59c) /** GPIO_FUNC18_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC18_OUT_SEL 0x000000FFU #define GPIO_FUNC18_OUT_SEL_M (GPIO_FUNC18_OUT_SEL_V << GPIO_FUNC18_OUT_SEL_S) #define GPIO_FUNC18_OUT_SEL_V 0x000000FFU #define GPIO_FUNC18_OUT_SEL_S 0 /** GPIO_FUNC18_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC18_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC18_OUT_INV_SEL_M (GPIO_FUNC18_OUT_INV_SEL_V << GPIO_FUNC18_OUT_INV_SEL_S) #define GPIO_FUNC18_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC18_OUT_INV_SEL_S 8 /** GPIO_FUNC18_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC18_OEN_SEL (BIT(9)) #define GPIO_FUNC18_OEN_SEL_M (GPIO_FUNC18_OEN_SEL_V << GPIO_FUNC18_OEN_SEL_S) #define GPIO_FUNC18_OEN_SEL_V 0x00000001U #define GPIO_FUNC18_OEN_SEL_S 9 /** GPIO_FUNC18_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC18_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC18_OEN_INV_SEL_M (GPIO_FUNC18_OEN_INV_SEL_V << GPIO_FUNC18_OEN_INV_SEL_S) #define GPIO_FUNC18_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC18_OEN_INV_SEL_S 10 /** GPIO_FUNC19_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC19_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x5a0) /** GPIO_FUNC19_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC19_OUT_SEL 0x000000FFU #define GPIO_FUNC19_OUT_SEL_M (GPIO_FUNC19_OUT_SEL_V << GPIO_FUNC19_OUT_SEL_S) #define GPIO_FUNC19_OUT_SEL_V 0x000000FFU #define GPIO_FUNC19_OUT_SEL_S 0 /** GPIO_FUNC19_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC19_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC19_OUT_INV_SEL_M (GPIO_FUNC19_OUT_INV_SEL_V << GPIO_FUNC19_OUT_INV_SEL_S) #define GPIO_FUNC19_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC19_OUT_INV_SEL_S 8 /** GPIO_FUNC19_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC19_OEN_SEL (BIT(9)) #define GPIO_FUNC19_OEN_SEL_M (GPIO_FUNC19_OEN_SEL_V << GPIO_FUNC19_OEN_SEL_S) #define GPIO_FUNC19_OEN_SEL_V 0x00000001U #define GPIO_FUNC19_OEN_SEL_S 9 /** GPIO_FUNC19_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC19_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC19_OEN_INV_SEL_M (GPIO_FUNC19_OEN_INV_SEL_V << GPIO_FUNC19_OEN_INV_SEL_S) #define GPIO_FUNC19_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC19_OEN_INV_SEL_S 10 /** GPIO_FUNC20_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC20_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x5a4) /** GPIO_FUNC20_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC20_OUT_SEL 0x000000FFU #define GPIO_FUNC20_OUT_SEL_M (GPIO_FUNC20_OUT_SEL_V << GPIO_FUNC20_OUT_SEL_S) #define GPIO_FUNC20_OUT_SEL_V 0x000000FFU #define GPIO_FUNC20_OUT_SEL_S 0 /** GPIO_FUNC20_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC20_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC20_OUT_INV_SEL_M (GPIO_FUNC20_OUT_INV_SEL_V << GPIO_FUNC20_OUT_INV_SEL_S) #define GPIO_FUNC20_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC20_OUT_INV_SEL_S 8 /** GPIO_FUNC20_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC20_OEN_SEL (BIT(9)) #define GPIO_FUNC20_OEN_SEL_M (GPIO_FUNC20_OEN_SEL_V << GPIO_FUNC20_OEN_SEL_S) #define GPIO_FUNC20_OEN_SEL_V 0x00000001U #define GPIO_FUNC20_OEN_SEL_S 9 /** GPIO_FUNC20_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC20_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC20_OEN_INV_SEL_M (GPIO_FUNC20_OEN_INV_SEL_V << GPIO_FUNC20_OEN_INV_SEL_S) #define GPIO_FUNC20_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC20_OEN_INV_SEL_S 10 /** GPIO_FUNC21_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC21_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x5a8) /** GPIO_FUNC21_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC21_OUT_SEL 0x000000FFU #define GPIO_FUNC21_OUT_SEL_M (GPIO_FUNC21_OUT_SEL_V << GPIO_FUNC21_OUT_SEL_S) #define GPIO_FUNC21_OUT_SEL_V 0x000000FFU #define GPIO_FUNC21_OUT_SEL_S 0 /** GPIO_FUNC21_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC21_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC21_OUT_INV_SEL_M (GPIO_FUNC21_OUT_INV_SEL_V << GPIO_FUNC21_OUT_INV_SEL_S) #define GPIO_FUNC21_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC21_OUT_INV_SEL_S 8 /** GPIO_FUNC21_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC21_OEN_SEL (BIT(9)) #define GPIO_FUNC21_OEN_SEL_M (GPIO_FUNC21_OEN_SEL_V << GPIO_FUNC21_OEN_SEL_S) #define GPIO_FUNC21_OEN_SEL_V 0x00000001U #define GPIO_FUNC21_OEN_SEL_S 9 /** GPIO_FUNC21_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC21_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC21_OEN_INV_SEL_M (GPIO_FUNC21_OEN_INV_SEL_V << GPIO_FUNC21_OEN_INV_SEL_S) #define GPIO_FUNC21_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC21_OEN_INV_SEL_S 10 /** GPIO_FUNC22_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC22_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x5ac) /** GPIO_FUNC22_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC22_OUT_SEL 0x000000FFU #define GPIO_FUNC22_OUT_SEL_M (GPIO_FUNC22_OUT_SEL_V << GPIO_FUNC22_OUT_SEL_S) #define GPIO_FUNC22_OUT_SEL_V 0x000000FFU #define GPIO_FUNC22_OUT_SEL_S 0 /** GPIO_FUNC22_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC22_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC22_OUT_INV_SEL_M (GPIO_FUNC22_OUT_INV_SEL_V << GPIO_FUNC22_OUT_INV_SEL_S) #define GPIO_FUNC22_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC22_OUT_INV_SEL_S 8 /** GPIO_FUNC22_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC22_OEN_SEL (BIT(9)) #define GPIO_FUNC22_OEN_SEL_M (GPIO_FUNC22_OEN_SEL_V << GPIO_FUNC22_OEN_SEL_S) #define GPIO_FUNC22_OEN_SEL_V 0x00000001U #define GPIO_FUNC22_OEN_SEL_S 9 /** GPIO_FUNC22_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC22_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC22_OEN_INV_SEL_M (GPIO_FUNC22_OEN_INV_SEL_V << GPIO_FUNC22_OEN_INV_SEL_S) #define GPIO_FUNC22_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC22_OEN_INV_SEL_S 10 /** GPIO_FUNC23_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC23_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x5b0) /** GPIO_FUNC23_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC23_OUT_SEL 0x000000FFU #define GPIO_FUNC23_OUT_SEL_M (GPIO_FUNC23_OUT_SEL_V << GPIO_FUNC23_OUT_SEL_S) #define GPIO_FUNC23_OUT_SEL_V 0x000000FFU #define GPIO_FUNC23_OUT_SEL_S 0 /** GPIO_FUNC23_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC23_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC23_OUT_INV_SEL_M (GPIO_FUNC23_OUT_INV_SEL_V << GPIO_FUNC23_OUT_INV_SEL_S) #define GPIO_FUNC23_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC23_OUT_INV_SEL_S 8 /** GPIO_FUNC23_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC23_OEN_SEL (BIT(9)) #define GPIO_FUNC23_OEN_SEL_M (GPIO_FUNC23_OEN_SEL_V << GPIO_FUNC23_OEN_SEL_S) #define GPIO_FUNC23_OEN_SEL_V 0x00000001U #define GPIO_FUNC23_OEN_SEL_S 9 /** GPIO_FUNC23_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC23_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC23_OEN_INV_SEL_M (GPIO_FUNC23_OEN_INV_SEL_V << GPIO_FUNC23_OEN_INV_SEL_S) #define GPIO_FUNC23_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC23_OEN_INV_SEL_S 10 /** GPIO_FUNC24_OUT_SEL_CFG_REG register * GPIO output function select register */ #define GPIO_FUNC24_OUT_SEL_CFG_REG (DR_REG_GPIO_BASE + 0x5b4) /** GPIO_FUNC24_OUT_SEL : R/W; bitpos: [7:0]; default: 128; * The value of the bits: 0<=s<=256. Set the value to select output signal. s=0-255: * output of GPIO[n] equals input of peripheral[s]. s=256: output of GPIO[n] equals * GPIO_OUT_REG[n]. */ #define GPIO_FUNC24_OUT_SEL 0x000000FFU #define GPIO_FUNC24_OUT_SEL_M (GPIO_FUNC24_OUT_SEL_V << GPIO_FUNC24_OUT_SEL_S) #define GPIO_FUNC24_OUT_SEL_V 0x000000FFU #define GPIO_FUNC24_OUT_SEL_S 0 /** GPIO_FUNC24_OUT_INV_SEL : R/W; bitpos: [8]; default: 0; * set this bit to invert output signal.1:invert.0:not invert. */ #define GPIO_FUNC24_OUT_INV_SEL (BIT(8)) #define GPIO_FUNC24_OUT_INV_SEL_M (GPIO_FUNC24_OUT_INV_SEL_V << GPIO_FUNC24_OUT_INV_SEL_S) #define GPIO_FUNC24_OUT_INV_SEL_V 0x00000001U #define GPIO_FUNC24_OUT_INV_SEL_S 8 /** GPIO_FUNC24_OEN_SEL : R/W; bitpos: [9]; default: 0; * set this bit to select output enable signal.1:use GPIO_ENABLE_REG[n] as output * enable signal.0:use peripheral output enable signal. */ #define GPIO_FUNC24_OEN_SEL (BIT(9)) #define GPIO_FUNC24_OEN_SEL_M (GPIO_FUNC24_OEN_SEL_V << GPIO_FUNC24_OEN_SEL_S) #define GPIO_FUNC24_OEN_SEL_V 0x00000001U #define GPIO_FUNC24_OEN_SEL_S 9 /** GPIO_FUNC24_OEN_INV_SEL : R/W; bitpos: [10]; default: 0; * set this bit to invert output enable signal.1:invert.0:not invert. */ #define GPIO_FUNC24_OEN_INV_SEL (BIT(10)) #define GPIO_FUNC24_OEN_INV_SEL_M (GPIO_FUNC24_OEN_INV_SEL_V << GPIO_FUNC24_OEN_INV_SEL_S) #define GPIO_FUNC24_OEN_INV_SEL_V 0x00000001U #define GPIO_FUNC24_OEN_INV_SEL_S 10 /** GPIO_CLOCK_GATE_REG_REG register * GPIO clock gate register */ #define GPIO_CLOCK_GATE_REG_REG (DR_REG_GPIO_BASE + 0x62c) /** GPIO_CLK_EN : R/W; bitpos: [0]; default: 1; * set this bit to enable GPIO clock gate */ #define GPIO_CLK_EN (BIT(0)) #define GPIO_CLK_EN_M (GPIO_CLK_EN_V << GPIO_CLK_EN_S) #define GPIO_CLK_EN_V 0x00000001U #define GPIO_CLK_EN_S 0 /** GPIO_REG_DATE_REG_REG register * GPIO version register */ #define GPIO_REG_DATE_REG_REG (DR_REG_GPIO_BASE + 0x6fc) /** GPIO_REG_DATE : R/W; bitpos: [27:0]; default: 34627984; * version register */ #define GPIO_REG_DATE 0x0FFFFFFFU #define GPIO_REG_DATE_M (GPIO_REG_DATE_V << GPIO_REG_DATE_S) #define GPIO_REG_DATE_V 0x0FFFFFFFU #define GPIO_REG_DATE_S 0 #ifdef __cplusplus } #endif