/*
 * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include "sdkconfig.h"

#pragma once

#include <stdint.h>
#include "ets_sys.h"

#ifdef __cplusplus
extern "C" {
#endif

void ets_secure_boot_start(void);

void ets_secure_boot_finish(void);

void ets_secure_boot_hash(const uint32_t *buf);

void ets_secure_boot_obtain(void);

int ets_secure_boot_check(uint32_t *buf);

void ets_secure_boot_rd_iv(uint32_t *buf);

void ets_secure_boot_rd_abstract(uint32_t *buf);

bool ets_secure_boot_check_start(uint8_t abs_index, uint32_t iv_addr);

int ets_secure_boot_check_finish(uint32_t *abstract);

#if CONFIG_ESP32_REV_MIN_FULL >= 300
#include "rsa_pss.h"

#define SECURE_BOOT_NUM_BLOCKS 1

#define CRC_SIGN_BLOCK_LEN 1196
#define SIG_BLOCK_PADDING 4096
#define ETS_SECURE_BOOT_V2_SIGNATURE_MAGIC 0xE7

// Anti-FI measure: use full words for success/fail internally, instead of 0/non-zero
typedef enum {
    SBV2_SUCCESS = 0x3A5A5AA5,
    SB_SUCCESS   = 0x3A5A5AA5,
    SBV2_FAILED = 0xA533885A,
    SB_FAILED   = 0xA533885A,
} secure_boot_v2_status_t;

/* Secure Boot Version 2 signature format for ESP32 ECO3 */
typedef struct {
    uint8_t magic_byte;
    uint8_t version;
    uint8_t _reserved1;
    uint8_t _reserved2;
    uint8_t image_digest[32];
    ets_rsa_pubkey_t key;
    uint8_t signature[384];
    uint32_t block_crc;
    uint8_t _padding[16];
} ets_secure_boot_sig_block_t;
_Static_assert(sizeof(ets_secure_boot_sig_block_t) == 1216, "invalid sig block size");

/* ROM supports up to 3, but IDF only checks the first one (SECURE_BOOT_NUM_BLOCKS) */
#define SECURE_BOOT_MAX_APPENDED_SIGN_BLOCKS_TO_IMAGE 3

/* Multiple key block support */
typedef struct {
    ets_secure_boot_sig_block_t block[SECURE_BOOT_MAX_APPENDED_SIGN_BLOCKS_TO_IMAGE];
    uint8_t _padding[4096 - (sizeof(ets_secure_boot_sig_block_t) * SECURE_BOOT_MAX_APPENDED_SIGN_BLOCKS_TO_IMAGE)];
} ets_secure_boot_signature_t;

_Static_assert(sizeof(ets_secure_boot_signature_t) == 4096, "invalid sig sector size");

typedef struct {
    const void *key_digests[SECURE_BOOT_NUM_BLOCKS];
} ets_secure_boot_key_digests_t;

/** @brief Verifies the signature block appended to a firmware image. Implemented in the ROM.
 *
 * This function is used to verify the bootloader before burning its public key hash into Efuse.
 * Also, it is used to verify the app on loading the image on boot and on OTA.
 *
 * @param sig The signature block flashed aligned 4096 bytes from the firmware. (ROM implementation expects 3 blocks, sig->block[3]).
 * @param image_digest The SHA-256 Digest of the firmware to be verified
 * @param trusted_key_digest The SHA-256 Digest of the public key (ets_rsa_pubkey_t) of a single signature block.
 * @param verified_digest RSA-PSS signature of image_digest. Pass an uninitialised array.
 *
 * @return SBV2_SUCCESS if signature is valid
 * SBV2_FAILED for failures.
 */
secure_boot_v2_status_t ets_secure_boot_verify_signature(const ets_secure_boot_signature_t *sig, const uint8_t *image_digest, const uint8_t *trusted_key_digest, uint8_t *verified_digest);

/** @brief This function verifies the 1st stage bootloader. Implemented in the ROM.
 *  Reboots post verification. It reads the Efuse key for verification of the public key.
 *
 * This function is not used in the current workflow.
 *
 */
void ets_secure_boot_verify_boot_bootloader(void);

/** @brief Confirms if the secure boot V2 has been enabled. Implemented in the ROM.
 *
 * In ESP32-ECO3 - It checks the value of ABS_DONE_1 in EFuse.
 *
 * @return true if is Secure boot v2 has been enabled
 * False if Secure boot v2 has not been enabled.
 */
bool ets_use_secure_boot_v2(void);

#else
#define SECURE_BOOT_NUM_BLOCKS 0

#endif /* CONFIG_ESP32_REV_MIN_FULL >= 300 */

#ifdef __cplusplus
}
#endif