# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps

.adc_dependencies: &adc_dependencies
  depends_components:
    - esp_adc
    - efuse
    - esp_driver_i2s
    - esp_driver_spi

examples/peripherals/adc/continuous_read:
  disable:
    - if: SOC_ADC_DMA_SUPPORTED != 1
  <<: *adc_dependencies

examples/peripherals/adc/oneshot_read:
  disable:
    - if: SOC_ADC_SUPPORTED != 1
  <<: *adc_dependencies

examples/peripherals/analog_comparator:
  disable:
    - if: SOC_ANA_CMPR_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: not supported yet
  depends_components:
    - esp_driver_gpio
    - esp_driver_ana_cmpr

examples/peripherals/dac:
  disable:
    - if: SOC_DAC_SUPPORTED != 1

examples/peripherals/dac/dac_cosine_wave:
  disable:
    - if: SOC_DAC_SUPPORTED != 1
  depends_components:
    - esp_adc
    - efuse
    - esp_driver_i2s
    - esp_driver_spi
    - esp_driver_dac

examples/peripherals/gpio:
  depends_components:
    - esp_driver_gpio

examples/peripherals/gpio/matrix_keyboard:
  enable:
    - if: IDF_TARGET == "esp32s2"

examples/peripherals/i2c/i2c_eeprom:
  disable:
    - if: SOC_I2C_SUPPORTED != 1
  depends_components:
    - esp_driver_i2c

examples/peripherals/i2c/i2c_tools:
  disable:
    - if: SOC_I2C_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_i2c
  depends_filepatterns:
    - examples/system/console/advanced/components/**/*

examples/peripherals/i2s/i2s_basic/i2s_pdm:
  disable:
    - if: SOC_I2S_SUPPORTS_PDM != 1 or IDF_TARGET == "esp32p4"
  disable_test:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_i2s

examples/peripherals/i2s/i2s_basic/i2s_std:
  disable:
    - if: SOC_I2S_SUPPORTED != 1 or IDF_TARGET == "esp32p4"
  disable_test:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_i2s

examples/peripherals/i2s/i2s_basic/i2s_tdm:
  disable:
    - if: SOC_I2S_SUPPORTS_TDM != 1  or IDF_TARGET == "esp32p4"
  disable_test:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_i2s

examples/peripherals/i2s/i2s_codec/i2s_es7210_tdm:
  disable:
    - if: SOC_I2S_SUPPORTS_TDM != 1 or (SOC_I2C_SUPPORTED != 1 or SOC_GPSPI_SUPPORTED != 1)
      reason: rely on I2S TDM mode to receive audio, I2C to config es7210 and SPI to save audio to SD card
  disable_test:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_i2s
    - esp_driver_spi
  depends_filepatterns:
    - components/driver/i2c/**/*

examples/peripherals/i2s/i2s_codec/i2s_es8311:
  disable:
    - if: (SOC_I2S_SUPPORTED != 1 or SOC_I2C_SUPPORTED != 1)
      reason: rely on I2S STD mode and I2C to config es7210
  disable_test:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_i2s
  depends_filepatterns:
    - components/driver/i2c/**/*

examples/peripherals/i2s/i2s_recorder:
  disable:
    - if: SOC_SDMMC_HOST_SUPPORTED != 1 or IDF_TARGET == "esp32p4"
  enable:
    - if: SOC_I2S_SUPPORTS_PDM_RX > 0
  depends_components:
    - esp_driver_spi
    - esp_driver_i2s

examples/peripherals/lcd/i2c_oled:
  disable:
    - if: SOC_I2C_SUPPORTED != 1
  depends_components:
    - esp_lcd
  depends_filepatterns:
    - components/driver/i2c/**/*

examples/peripherals/lcd/i80_controller:
  disable:
    - if: SOC_LCD_I80_SUPPORTED != 1
  depends_components:
    - esp_lcd
    - esp_driver_i2s

examples/peripherals/lcd/mipi_dsi:
  disable:
    - if: SOC_LCD_MIPI_DSI_SUPPORTED != 1
  depends_components:
    - esp_lcd

examples/peripherals/lcd/rgb_panel:
  disable:
    - if: SOC_LCD_RGB_SUPPORTED != 1
  depends_components:
    - esp_lcd

examples/peripherals/lcd/spi_lcd_touch:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1
  depends_components:
    - esp_lcd
    - esp_driver_spi

examples/peripherals/lcd/tjpgd:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1
  depends_components:
    - esp_lcd
    - esp_driver_spi

examples/peripherals/ledc:
  disable:
    - if: SOC_LEDC_SUPPORTED != 1
  depends_components:
    - esp_driver_ledc

examples/peripherals/ledc/ledc_gamma_curve_fade:
  disable:
    - if: SOC_LEDC_SUPPORTED != 1 or SOC_LEDC_GAMMA_CURVE_FADE_SUPPORTED != 1
  depends_components:
    - esp_driver_ledc

examples/peripherals/mcpwm:
  disable:
    - if: SOC_MCPWM_SUPPORTED != 1
  depends_components:
    - esp_driver_mcpwm

examples/peripherals/mcpwm/mcpwm_bdc_speed_control:
  disable:
    - if: SOC_MCPWM_SUPPORTED != 1
  depends_components:
    - esp_driver_mcpwm
  disable_test:
    - if: IDF_TARGET != "esp32s3"
      temporary: true
      reason: lack of runners

examples/peripherals/mcpwm/mcpwm_bldc_hall_control:
  disable:
    - if: SOC_MCPWM_SUPPORTED != 1
  depends_components:
    - esp_driver_mcpwm
  disable_test:
    - if: IDF_TARGET != "esp32s3"
      temporary: true
      reason: lack of runners

examples/peripherals/mcpwm/mcpwm_capture_hc_sr04:
  disable:
    - if: SOC_MCPWM_SUPPORTED != 1
  depends_components:
    - esp_driver_mcpwm

examples/peripherals/mcpwm/mcpwm_foc_svpwm_open_loop:
  disable:
    - if: SOC_MCPWM_SUPPORTED != 1
  depends_components:
    - esp_driver_mcpwm
  disable_test:
    - if: IDF_TARGET != "esp32s3"
      temporary: true
      reason: lack of runners

examples/peripherals/mcpwm/mcpwm_servo_control:
  disable:
    - if: SOC_MCPWM_SUPPORTED != 1
  depends_components:
    - esp_driver_mcpwm

examples/peripherals/mcpwm/mcpwm_sync:
  disable:
    - if: SOC_MCPWM_SUPPORTED != 1
  depends_components:
    - esp_driver_mcpwm

examples/peripherals/parlio:
  disable:
    - if: SOC_PARLIO_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: lack of runner
  depends_components:
    - esp_driver_parlio

examples/peripherals/parlio/parlio_rx:
  disable:
    - if: SOC_PARLIO_SUPPORTED != 1 or IDF_TARGET == "esp32p4"
      temporary: true
      reason: not support esp32p4 yet (IDF-7471)
  depends_components:
    - esp_driver_parlio

examples/peripherals/parlio/parlio_tx/simple_rgb_led_matrix:
  disable:
    - if: SOC_PARLIO_SUPPORTED != 1 or SOC_DEDICATED_GPIO_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET != "esp32c6"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_parlio

examples/peripherals/pcnt:
  disable:
    - if: SOC_PCNT_SUPPORTED != 1
  depends_components:
    - esp_driver_pcnt

examples/peripherals/rmt:
  disable:
    - if: SOC_RMT_SUPPORTED != 1
  depends_components:
    - esp_driver_rmt

examples/peripherals/rmt/ir_nec_transceiver:
  disable:
    - if: SOC_RMT_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_rmt

examples/peripherals/rmt/musical_buzzer:
  disable:
    - if: SOC_RMT_SUPPORT_TX_LOOP_COUNT != 1
  depends_components:
    - esp_driver_rmt

examples/peripherals/rmt/stepper_motor:
  disable:
    - if: SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP != 1
  depends_components:
    - esp_driver_rmt

examples/peripherals/sdio/host:
  disable:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: request p4 essl spi to be ready for build, TODO IDF-8357
  enable:
    - if: SOC_SDMMC_HOST_SUPPORTED == 1
    - if: IDF_TARGET == "esp32"
      temporary: true
      reason: Only the SDSPI of ESP32 supports ESP SDIO slave for now
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_sdio

examples/peripherals/sdio/slave:
  disable:
    - if: SOC_SDIO_SLAVE_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_driver_sdio

examples/peripherals/sigma_delta:
  disable:
    - if: SOC_SDM_SUPPORTED != 1
  depends_components:
    - esp_driver_sdm

examples/peripherals/spi_master/hd_eeprom:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1

examples/peripherals/spi_master/lcd:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1

examples/peripherals/spi_slave:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1

examples/peripherals/spi_slave_hd/append_mode/master:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1 or SOC_SPI_SUPPORT_SLAVE_HD_VER2 != 1

examples/peripherals/spi_slave_hd/append_mode/slave:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1 or SOC_SPI_SUPPORT_SLAVE_HD_VER2 != 1

examples/peripherals/spi_slave_hd/segment_mode/seg_master:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1 or SOC_SPI_SUPPORT_SLAVE_HD_VER2 != 1

examples/peripherals/spi_slave_hd/segment_mode/seg_slave:
  disable:
    - if: SOC_GPSPI_SUPPORTED != 1 or SOC_SPI_SUPPORT_SLAVE_HD_VER2 != 1

examples/peripherals/temperature_sensor/temp_sensor:
  disable:
    - if: SOC_TEMP_SENSOR_SUPPORTED != 1
  depends_components:
    - esp_driver_tsens

examples/peripherals/temperature_sensor/temp_sensor_monitor:
  disable:
    - if: SOC_TEMPERATURE_SENSOR_INTR_SUPPORT != 1
  depends_components:
    - esp_driver_tsens

examples/peripherals/timer_group/gptimer:
  disable:
    - if: SOC_GPTIMER_SUPPORTED != 1
  depends_components:
    - esp_driver_gptimer

examples/peripherals/timer_group/gptimer_capture_hc_sr04:
  disable:
    - if: SOC_TIMER_SUPPORT_ETM != 1
  depends_components:
    - esp_driver_gptimer

examples/peripherals/timer_group/legacy_driver:
  disable:
    - if: SOC_GPTIMER_SUPPORTED != 1
  depends_components:
    - driver # legacy driver is still located in the "driver" component

examples/peripherals/touch_sensor:
  disable:
    - if: SOC_TOUCH_SENSOR_SUPPORTED != 1

examples/peripherals/touch_sensor/touch_element:
  enable:
    - if: IDF_TARGET in ["esp32s2", "esp32s3"]
      reason: only supports esp32s2 and esp32s3

examples/peripherals/touch_sensor/touch_sensor_v1:
  disable:
    - if: SOC_TOUCH_SENSOR_VERSION != 1

examples/peripherals/touch_sensor/touch_sensor_v2:
  disable:
    - if: SOC_TOUCH_SENSOR_VERSION != 2

examples/peripherals/twai/twai_alert_and_recovery:
  disable:
    - if: SOC_TWAI_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET not in ["esp32"]
      temporary: true
      reason: lack of runners

examples/peripherals/twai/twai_network:
  disable:
    - if: SOC_TWAI_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET not in ["esp32"]
      temporary: true
      reason: lack of runners

examples/peripherals/twai/twai_self_test:
  disable:
    - if: SOC_TWAI_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET not in ["esp32"]
      temporary: true
      reason: lack of runners

examples/peripherals/uart/uart_echo_rs485:
  enable:
    - if: INCLUDE_DEFAULT == 1

examples/peripherals/usb:
  disable:
    - if: SOC_USB_OTG_SUPPORTED != 1

examples/peripherals/usb/device:
  enable:
    - if: SOC_USB_OTG_SUPPORTED == 1
  disable_test:
    - if: IDF_TARGET == "esp32s3"
      temporary: true
      reason: lack of runners
  depends_components:
    - usb
  depends_filepatterns:
    - components/hal/usb*.c
    - components/hal/esp32*/include/hal/usb*.h
    - examples/peripherals/usb/host/**/*
    - examples/peripherals/usb/device/**/*

examples/peripherals/usb_serial_jtag/usb_serial_jtag_echo:
  disable:
    - if: SOC_USB_SERIAL_JTAG_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET not in ["esp32c6"]
      temporary: true
      reason: lack of runners. Hardware is similar, test on one target is enough currently.
  depends_components:
    - esp_driver_usb_serial_jtag