/* OpenThread Border Router Example

   This example code is in the Public Domain (or CC0 licensed, at your option.)

   Unless required by applicable law or agreed to in writing, this
   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
   CONDITIONS OF ANY KIND, either express or implied.
*/

#pragma once

#include "esp_openthread_types.h"

#define ESP_OPENTHREAD_DEFAULT_RADIO_CONFIG()                        \
    {                                                                \
        .radio_mode = RADIO_MODE_UART_RCP,                           \
        .radio_uart_config = {                                       \
            .port = 1,                                               \
            .uart_config =                                           \
                {                                                    \
                    .baud_rate = 115200,                             \
                    .data_bits = UART_DATA_8_BITS,                   \
                    .parity = UART_PARITY_DISABLE,                   \
                    .stop_bits = UART_STOP_BITS_1,                   \
                    .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,           \
                    .rx_flow_ctrl_thresh = 0,                        \
                    .source_clk = UART_SCLK_APB,                     \
                },                                                   \
            .rx_pin = 4,                                             \
            .tx_pin = 5,                                             \
        },                                                           \
    }

#define ESP_OPENTHREAD_DEFAULT_HOST_CONFIG()                    \
    {                                                           \
        .host_connection_mode = HOST_CONNECTION_MODE_CLI_UART,  \
        .host_uart_config = {                                   \
            .port = 0,                                          \
            .uart_config =                                      \
                {                                               \
                    .baud_rate = 115200,                        \
                    .data_bits = UART_DATA_8_BITS,              \
                    .parity = UART_PARITY_DISABLE,              \
                    .stop_bits = UART_STOP_BITS_1,              \
                    .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,      \
                    .rx_flow_ctrl_thresh = 0,                   \
                    .source_clk = UART_SCLK_APB,                \
                },                                              \
            .rx_pin = UART_PIN_NO_CHANGE,                       \
            .tx_pin = UART_PIN_NO_CHANGE,                       \
        },                                                      \
    }

#define ESP_OPENTHREAD_DEFAULT_PORT_CONFIG()    \
    {                                           \
        .storage_partition_name = "ot_storage", \
        .netif_queue_size = 10,                 \
        .task_queue_size = 10,                  \
    }