/* Copyright 2018 Espressif Systems (Shanghai) PTE LTD * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* * FreeModbus Libary: ESP32 Port * Copyright (C) 2010 Christian Walter * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * IF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * File: $Id: port.h,v 1.1 2010/06/06 13:07:20 wolti Exp $ */ #ifndef PORT_COMMON_H_ #define PORT_COMMON_H_ #include "freertos/FreeRTOS.h" #include "esp_log.h" // for ESP_LOGE macro #include "mbconfig.h" #define INLINE inline #define PR_BEGIN_EXTERN_C extern "C" { #define PR_END_EXTERN_C } #define MB_PORT_TAG "MB_PORT_COMMON" #define MB_BAUD_RATE_DEFAULT (115200) #define MB_QUEUE_LENGTH (CONFIG_FMB_QUEUE_LENGTH) #define MB_SERIAL_TASK_PRIO (CONFIG_FMB_PORT_TASK_PRIO) #define MB_SERIAL_TASK_STACK_SIZE (CONFIG_FMB_PORT_TASK_STACK_SIZE) #define MB_SERIAL_TOUT (3) // 3.5*8 = 28 ticks, TOUT=3 -> ~24..33 ticks // Set buffer size for transmission #define MB_SERIAL_BUF_SIZE (CONFIG_FMB_SERIAL_BUF_SIZE) // common definitions for serial port implementations #define MB_SERIAL_TX_TOUT_MS (2200) // maximum time for transmission of longest allowed frame buffer #define MB_SERIAL_TX_TOUT_TICKS pdMS_TO_TICKS(MB_SERIAL_TX_TOUT_MS) // timeout for transmission #define MB_SERIAL_RX_TOUT_MS (1) #define MB_SERIAL_RX_TOUT_TICKS pdMS_TO_TICKS(MB_SERIAL_RX_TOUT_MS) // timeout for receive #define MB_SERIAL_RESP_LEN_MIN (4) // Common definitions for TCP port #define MB_TCP_BUF_SIZE (256 + 7) // Must hold a complete Modbus TCP frame. #define MB_TCP_DEFAULT_PORT (CONFIG_FMB_TCP_PORT_DEFAULT) #define MB_TCP_STACK_SIZE (CONFIG_FMB_PORT_TASK_STACK_SIZE) #define MB_TCP_TASK_PRIO (CONFIG_FMB_PORT_TASK_PRIO) // The task affinity for Modbus stack tasks #define MB_PORT_TASK_AFFINITY (CONFIG_FMB_PORT_TASK_AFFINITY) #define MB_TCP_READ_TIMEOUT_MS (100) // read timeout in mS #define MB_TCP_READ_TIMEOUT (pdMS_TO_TICKS(MB_TCP_READ_TIMEOUT_MS)) #define MB_TCP_SEND_TIMEOUT_MS (500) // send event timeout in mS #define MB_TCP_SEND_TIMEOUT (pdMS_TO_TICKS(MB_TCP_SEND_TIMEOUT_MS)) #define MB_TCP_PORT_MAX_CONN (CONFIG_FMB_TCP_PORT_MAX_CONN) #define MB_TCP_FRAME_LOG_BUFSIZE (256) #define MB_PORT_HAS_CLOSE (1) // Define to explicitly close port on destroy // Define number of timer reloads per 1 mS #define MB_TIMER_TICS_PER_MS (20UL) #define MB_TCP_DEBUG (LOG_LOCAL_LEVEL >= ESP_LOG_DEBUG) // Enable legacy debug output in TCP module. #define MB_TCP_GET_FIELD(buffer, field) ((USHORT)((buffer[field] << 8U) | buffer[field + 1])) #define MB_PORT_CHECK(a, ret_val, str, ...) \ if (!(a)) { \ ESP_LOGE(MB_PORT_TAG, "%s(%u): " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \ return ret_val; \ } #ifdef __cplusplus PR_BEGIN_EXTERN_C #endif /* __cplusplus */ #ifndef TRUE #define TRUE 1 #endif #ifndef FALSE #define FALSE 0 #endif typedef char BOOL; typedef unsigned char UCHAR; typedef char CHAR; typedef unsigned short USHORT; typedef short SHORT; typedef unsigned long ULONG; typedef long LONG; #if MB_TCP_DEBUG typedef enum { MB_LOG_DEBUG, MB_LOG_INFO, MB_LOG_WARN, MB_LOG_ERROR } eMBPortLogLevel; #endif typedef enum { MB_PROTO_TCP, MB_PROTO_UDP, } eMBPortProto; typedef enum { MB_PORT_IPV4 = 0, /*!< TCP IPV4 addressing */ MB_PORT_IPV6 = 1 /*!< TCP IPV6 addressing */ } eMBPortIpVer; void vMBPortEnterCritical(void); void vMBPortExitCritical(void); #define ENTER_CRITICAL_SECTION( ) { ESP_EARLY_LOGD(MB_PORT_TAG,"%s: Port enter critical.", __func__); \ vMBPortEnterCritical(); } #define EXIT_CRITICAL_SECTION( ) { vMBPortExitCritical(); \ ESP_EARLY_LOGD(MB_PORT_TAG,"%s: Port exit critical", __func__); } #define MB_PORT_CHECK_EVENT( event, mask ) ( event & mask ) #define MB_PORT_CLEAR_EVENT( event, mask ) do { event &= ~mask; } while(0) #define MB_PORT_PARITY_GET(parity) ((parity != UART_PARITY_DISABLE) ? \ ((parity == UART_PARITY_ODD) ? MB_PAR_ODD : MB_PAR_EVEN) : MB_PAR_NONE) // Legacy Modbus logging function #if MB_TCP_DEBUG void vMBPortLog( eMBPortLogLevel eLevel, const CHAR * szModule, const CHAR * szFmt, ... ); void prvvMBTCPLogFrame( const CHAR * pucMsg, UCHAR * pucFrame, USHORT usFrameLen ); #endif void vMBPortSetMode( UCHAR ucMode ); UCHAR ucMBPortGetMode( void ); #ifdef __cplusplus PR_END_EXTERN_C #endif /* __cplusplus */ #endif /* PORT_COMMON_H_ */