/* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Simon Goldschmidt * */ #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ #include #include #include #include #include #include #include #include #include "esp_task.h" #include "esp_system.h" #include "sdkconfig.h" #include "sntp.h" #include "netif/dhcp_state.h" /* Enable all Espressif-only options */ /* ----------------------------------------------- ---------- Platform specific locking ---------- ----------------------------------------------- */ /** * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain * critical regions during buffer allocation, deallocation and memory * allocation and deallocation. */ #define SYS_LIGHTWEIGHT_PROT 1 /** * MEMCPY: override this if you have a faster implementation at hand than the * one included in your C library */ #define MEMCPY(dst,src,len) memcpy(dst,src,len) /** * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a * call to memcpy() if the length is known at compile time and is small. */ #define SMEMCPY(dst,src,len) memcpy(dst,src,len) #define LWIP_RAND esp_random /* ------------------------------------ ---------- Memory options ---------- ------------------------------------ */ /** * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library * instead of the lwip internal allocator. Can save code size if you * already use it. */ #define MEM_LIBC_MALLOC 1 /** * MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator. * Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution * speed and usage from interrupts! */ #define MEMP_MEM_MALLOC 1 /** * MEM_ALIGNMENT: should be set to the alignment of the CPU * 4 byte alignment -> #define MEM_ALIGNMENT 4 * 2 byte alignment -> #define MEM_ALIGNMENT 2 */ #define MEM_ALIGNMENT 4 /* ------------------------------------------------ ---------- Internal Memory Pool Sizes ---------- ------------------------------------------------ */ /** * MEMP_NUM_NETCONN: the number of struct netconns. * (only needed if you use the sequential API, like api_lib.c) */ #define MEMP_NUM_NETCONN CONFIG_LWIP_MAX_SOCKETS /** * MEMP_NUM_RAW_PCB: Number of raw connection PCBs * (requires the LWIP_RAW option) */ #define MEMP_NUM_RAW_PCB CONFIG_LWIP_MAX_RAW_PCBS /** * MEMP_NUM_TCP_PCB: the number of simultaneously active TCP connections. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_PCB CONFIG_LWIP_MAX_ACTIVE_TCP /** * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_PCB_LISTEN CONFIG_LWIP_MAX_LISTENING_TCP /** * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One * per active UDP "connection". * (requires the LWIP_UDP option) */ #define MEMP_NUM_UDP_PCB CONFIG_LWIP_MAX_UDP_PCBS /* -------------------------------- ---------- ARP options ------- -------------------------------- */ /** * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address * resolution. By default, only the most recent packet is queued per IP address. * This is sufficient for most protocols and mainly reduces TCP connection * startup time. Set this to 1 if you know your application sends more than one * packet in a row to an IP address that is not in the ARP cache. */ #define ARP_QUEUEING 1 /* -------------------------------- ---------- IP options ---------- -------------------------------- */ /** * IP_REASSEMBLY==1: Reassemble incoming fragmented IP4 packets. Note that * this option does not affect outgoing packet sizes, which can be controlled * via IP_FRAG. */ #define IP_REASSEMBLY CONFIG_LWIP_IP4_REASSEMBLY /** * LWIP_IPV6_REASS==1: reassemble incoming IP6 packets that fragmented. Note that * this option does not affect outgoing packet sizes, which can be controlled * via LWIP_IPV6_FRAG. */ #define LWIP_IPV6_REASS CONFIG_LWIP_IP6_REASSEMBLY /** * IP_FRAG==1: Fragment outgoing IP4 packets if their size exceeds MTU. Note * that this option does not affect incoming packet sizes, which can be * controlled via IP_REASSEMBLY. */ #define IP_FRAG CONFIG_LWIP_IP4_FRAG /** * LWIP_IPV6_FRAG==1: Fragment outgoing IP6 packets if their size exceeds MTU. Note * that this option does not affect incoming packet sizes, which can be * controlled via IP_REASSEMBLY. */ #define LWIP_IPV6_FRAG CONFIG_LWIP_IP6_FRAG /** * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived * in this time, the whole packet is discarded. */ #define IP_REASS_MAXAGE 3 /** * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. * Since the received pbufs are enqueued, be sure to configure * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive * packets even if the maximum amount of fragments is enqueued for reassembly! */ #define IP_REASS_MAX_PBUFS 10 /** * IP_FORWARD==1: Enables the ability to forward IP packets across network * interfaces. If you are going to run lwIP on a device with only one network * interface, define this to 0. */ #define IP_FORWARD CONFIG_LWIP_IP_FORWARD /** * IP_NAPT==1: Enables IPv4 Network Address and Port Translation. * Note that both CONFIG_LWIP_IP_FORWARD and CONFIG_LWIP_L2_TO_L3_COPY options * need to be enabled in system configuration for the NAPT to work on ESP platform */ #define IP_NAPT CONFIG_LWIP_IPV4_NAPT /* ---------------------------------- ---------- ICMP options ---------- ---------------------------------- */ #define LWIP_BROADCAST_PING CONFIG_LWIP_BROADCAST_PING #define LWIP_MULTICAST_PING CONFIG_LWIP_MULTICAST_PING /* --------------------------------- ---------- RAW options ---------- --------------------------------- */ /** * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. */ #define LWIP_RAW 1 /* ---------------------------------- ---------- DHCP options ---------- ---------------------------------- */ /** * LWIP_DHCP==1: Enable DHCP module. */ #define LWIP_DHCP 1 #define DHCP_MAXRTX 0 /** * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. */ #define DHCP_DOES_ARP_CHECK CONFIG_LWIP_DHCP_DOES_ARP_CHECK /** * CONFIG_LWIP_DHCP_RESTORE_LAST_IP==1: Last valid IP address obtained from DHCP server * is restored after reset/power-up. */ #if CONFIG_LWIP_DHCP_RESTORE_LAST_IP #define LWIP_DHCP_IP_ADDR_RESTORE() dhcp_ip_addr_restore(netif) #define LWIP_DHCP_IP_ADDR_STORE() dhcp_ip_addr_store(netif) #define LWIP_DHCP_IP_ADDR_ERASE(esp_netif) dhcp_ip_addr_erase(esp_netif) #endif /* ------------------------------------ ---------- AUTOIP options ---------- ------------------------------------ */ #ifdef CONFIG_LWIP_AUTOIP #define LWIP_AUTOIP 1 /** * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on * the same interface at the same time. */ #define LWIP_DHCP_AUTOIP_COOP 1 /** * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes * that should be sent before falling back on AUTOIP. This can be set * as low as 1 to get an AutoIP address very quickly, but you should * be prepared to handle a changing IP address when DHCP overrides * AutoIP. */ #define LWIP_DHCP_AUTOIP_COOP_TRIES CONFIG_LWIP_AUTOIP_TRIES #define LWIP_AUTOIP_MAX_CONFLICTS CONFIG_LWIP_AUTOIP_MAX_CONFLICTS #define LWIP_AUTOIP_RATE_LIMIT_INTERVAL CONFIG_LWIP_AUTOIP_RATE_LIMIT_INTERVAL #endif /* CONFIG_LWIP_AUTOIP */ /* ---------------------------------- ---------- SNMP options ---------- ---------------------------------- */ /* ---------------------------------- ---------- IGMP options ---------- ---------------------------------- */ /** * LWIP_IGMP==1: Turn on IGMP module. */ #define LWIP_IGMP 1 /* ---------------------------------- ---------- DNS options ----------- ---------------------------------- */ /** * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS * transport. */ #define LWIP_DNS 1 #define DNS_MAX_SERVERS 3 #define DNS_FALLBACK_SERVER_INDEX (DNS_MAX_SERVERS - 1) /* --------------------------------- ---------- UDP options ---------- --------------------------------- */ /* --------------------------------- ---------- TCP options ---------- --------------------------------- */ /** * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. * Define to 0 if your device is low on memory. */ #define TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ /** * LWIP_TCP_SACK_OUT==1: TCP will support sending selective acknowledgements (SACKs). */ #define LWIP_TCP_SACK_OUT CONFIG_LWIP_TCP_SACK_OUT /** * ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES==1: Keep TCP connection when IP changed * scenario happens: 192.168.0.2 -> 0.0.0.0 -> 192.168.0.2 or 192.168.0.2 -> 0.0.0.0 */ #define ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES /* * LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all * events (accept, sent, etc) that happen in the system. * LWIP_CALLBACK_API==1: The PCB callback function is called directly * for the event. This is the default. */ #define TCP_MSS CONFIG_LWIP_TCP_MSS /** * TCP_TMR_INTERVAL: TCP timer interval */ #define TCP_TMR_INTERVAL CONFIG_LWIP_TCP_TMR_INTERVAL /** * TCP_MSL: The maximum segment lifetime in milliseconds */ #define TCP_MSL CONFIG_LWIP_TCP_MSL /** * TCP_MAXRTX: Maximum number of retransmissions of data segments. */ #define TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX /** * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. */ #define TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX /** * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. */ #define TCP_LISTEN_BACKLOG 1 /** * TCP_OVERSIZE: The maximum number of bytes that tcp_write may * allocate ahead of time */ #ifdef CONFIG_LWIP_TCP_OVERSIZE_MSS #define TCP_OVERSIZE TCP_MSS #endif #ifdef CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS #define TCP_OVERSIZE (TCP_MSS/4) #endif #ifdef CONFIG_LWIP_TCP_OVERSIZE_DISABLE #define TCP_OVERSIZE 0 #endif #ifndef TCP_OVERSIZE #error "One of CONFIG_TCP_OVERSIZE_xxx options should be set by sdkconfig" #endif /** * LWIP_WND_SCALE and TCP_RCV_SCALE: * Set LWIP_WND_SCALE to 1 to enable window scaling. * Set TCP_RCV_SCALE to the desired scaling factor (shift count in the * range of [0..14]). * When LWIP_WND_SCALE is enabled but TCP_RCV_SCALE is 0, we can use a large * send window while having a small receive window only. */ #ifdef CONFIG_LWIP_WND_SCALE #define LWIP_WND_SCALE 1 #define TCP_RCV_SCALE CONFIG_LWIP_TCP_RCV_SCALE #endif /** * LWIP_TCP_RTO_TIME: TCP rto time. * Default is 3 second. */ #define LWIP_TCP_RTO_TIME CONFIG_LWIP_TCP_RTO_TIME /* ---------------------------------- ---------- Pbuf options ---------- ---------------------------------- */ /* ------------------------------------------------ ---------- Network Interfaces options ---------- ------------------------------------------------ */ /** * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname * field. */ #define LWIP_NETIF_HOSTNAME 1 /** * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data * to be sent into one single pbuf. This is for compatibility with DMA-enabled * MACs that do not support scatter-gather. * Beware that this might involve CPU-memcpy before transmitting that would not * be needed without this flag! Use this only if you need to! * * @todo: TCP and IP-frag do not work with this, yet: */ #define LWIP_NETIF_TX_SINGLE_PBUF 1 /* ------------------------------------ ---------- LOOPIF options ---------- ------------------------------------ */ #ifdef CONFIG_LWIP_NETIF_LOOPBACK /** * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP * address equal to the netif IP address, looping them back up the stack. */ #define LWIP_NETIF_LOOPBACK 1 /** * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback * sending for each netif (0 = disabled) */ #define LWIP_LOOPBACK_MAX_PBUFS CONFIG_LWIP_LOOPBACK_MAX_PBUFS #endif /* ------------------------------------ ---------- SLIPIF options ---------- ------------------------------------ */ #ifdef CONFIG_LWIP_SLIP_SUPPORT /** * Enable SLIP receive from ISR functions and disable Rx thread * * This is the only supported mode of lwIP SLIP interface, so that * - incoming packets are queued into pbufs * - no thread is created from lwIP * meaning it is the application responsibility to read data * from IO driver and feed them to the slip interface */ #define SLIP_RX_FROM_ISR 1 #define SLIP_USE_RX_THREAD 0 /** * PPP_DEBUG: Enable debugging for PPP. */ #define SLIP_DEBUG_ON CONFIG_LWIP_SLIP_DEBUG_ON #if SLIP_DEBUG_ON #define SLIP_DEBUG LWIP_DBG_ON #else #define SLIP_DEBUG LWIP_DBG_OFF #endif #endif /* ------------------------------------ ---------- Thread options ---------- ------------------------------------ */ /** * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. */ #define TCPIP_THREAD_NAME "tiT" /** * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #define TCPIP_THREAD_STACKSIZE ESP_TASK_TCPIP_STACK /** * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #define TCPIP_THREAD_PRIO ESP_TASK_TCPIP_PRIO /** * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages * The queue size value itself is platform-dependent, but is passed to * sys_mbox_new() when tcpip_init is called. */ #define TCPIP_MBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE /** * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #define DEFAULT_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE /** * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #define DEFAULT_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE /** * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. * The queue size value itself is platform-dependent, but is passed to * sys_mbox_new() when the acceptmbox is created. */ #define DEFAULT_ACCEPTMBOX_SIZE 6 /** * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #define DEFAULT_THREAD_STACKSIZE TCPIP_THREAD_STACKSIZE /** * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #define DEFAULT_THREAD_PRIO TCPIP_THREAD_PRIO /** * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #define DEFAULT_RAW_RECVMBOX_SIZE 6 /* ---------------------------------------------- ---------- Sequential layer options ---------- ---------------------------------------------- */ /** * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) * Don't use it if you're not an active lwIP project member */ #define LWIP_TCPIP_CORE_LOCKING 0 /* ------------------------------------ ---------- Socket options ---------- ------------------------------------ */ /** * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and * SO_SNDTIMEO processing. */ #define LWIP_SO_SNDTIMEO 1 /** * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and * SO_RCVTIMEO processing. */ #define LWIP_SO_RCVTIMEO 1 /** * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set * in seconds. (does not require sockets.c, and will affect tcp.c) */ #define LWIP_TCP_KEEPALIVE 1 /** * LWIP_SO_LINGER==1: Enable SO_LINGER processing. */ #define LWIP_SO_LINGER CONFIG_LWIP_SO_LINGER /** * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. */ #define LWIP_SO_RCVBUF CONFIG_LWIP_SO_RCVBUF /** * SO_REUSE==1: Enable SO_REUSEADDR option. * This option is set via menuconfig. */ #define SO_REUSE CONFIG_LWIP_SO_REUSE /** * LWIP_DNS_SUPPORT_MDNS_QUERIES==1: Enable mDNS queries in hostname resolution. * This option is set via menuconfig. */ #define LWIP_DNS_SUPPORT_MDNS_QUERIES CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES /** * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets * to all local matches if SO_REUSEADDR is turned on. * WARNING: Adds a memcpy for every packet if passing to more than one pcb! */ #define SO_REUSE_RXTOALL CONFIG_LWIP_SO_REUSE_RXTOALL /** * LWIP_NETBUF_RECVINFO==1: Enable IP_PKTINFO option. * This option is set via menuconfig. */ #define LWIP_NETBUF_RECVINFO CONFIG_LWIP_NETBUF_RECVINFO /* ---------------------------------------- ---------- Statistics options ---------- ---------------------------------------- */ /** * LWIP_STATS==1: Enable statistics collection in lwip_stats. */ #define LWIP_STATS CONFIG_LWIP_STATS #if LWIP_STATS /** * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. */ #define LWIP_STATS_DISPLAY CONFIG_LWIP_STATS #endif /* --------------------------------- ---------- PPP options ---------- --------------------------------- */ /** * PPP_SUPPORT==1: Enable PPP. */ #define PPP_SUPPORT CONFIG_LWIP_PPP_SUPPORT #if PPP_SUPPORT /** * PPP_IPV6_SUPPORT == 1: Enable IPV6 support for local link * between modem and lwIP stack. * Some modems do not support IPV6 addressing in local link and * the only option available is to disable IPV6 address negotiation. */ #define PPP_IPV6_SUPPORT CONFIG_LWIP_PPP_ENABLE_IPV6 /** * PPP_NOTIFY_PHASE==1: Support PPP notify phase. */ #define PPP_NOTIFY_PHASE CONFIG_LWIP_PPP_NOTIFY_PHASE_SUPPORT /** * PAP_SUPPORT==1: Support PAP. */ #define PAP_SUPPORT CONFIG_LWIP_PPP_PAP_SUPPORT /** * CHAP_SUPPORT==1: Support CHAP. */ #define CHAP_SUPPORT CONFIG_LWIP_PPP_CHAP_SUPPORT /** * MSCHAP_SUPPORT==1: Support MSCHAP. */ #define MSCHAP_SUPPORT CONFIG_LWIP_PPP_MSCHAP_SUPPORT /** * CCP_SUPPORT==1: Support CCP. */ #define MPPE_SUPPORT CONFIG_LWIP_PPP_MPPE_SUPPORT /** * PPP_MAXIDLEFLAG: Max Xmit idle time (in ms) before resend flag char. * TODO: If PPP_MAXIDLEFLAG > 0 and next package is send during PPP_MAXIDLEFLAG time, * then 0x7E is not added at the begining of PPP package but 0x7E termination * is always at the end. This behaviour brokes PPP dial with GSM (PPPoS). * The PPP package should always start and end with 0x7E. */ #define PPP_MAXIDLEFLAG 0 /** * PPP_DEBUG: Enable debugging for PPP. */ #define PPP_DEBUG_ON CONFIG_LWIP_PPP_DEBUG_ON #if PPP_DEBUG_ON #define PPP_DEBUG LWIP_DBG_ON #define PRINTPKT_SUPPORT 1 #define PPP_PROTOCOLNAME 1 #else #define PPP_DEBUG LWIP_DBG_OFF #endif #endif /* -------------------------------------- ---------- Checksum options ---------- -------------------------------------- */ /* --------------------------------------- ---------- IPv6 options --------------- --------------------------------------- */ /** * LWIP_IPV6==1: Enable IPv6 */ #define LWIP_IPV6 1 /** * MEMP_NUM_ND6_QUEUE: Max number of IPv6 packets to queue during MAC resolution. */ #define MEMP_NUM_ND6_QUEUE CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE /** * LWIP_ND6_NUM_NEIGHBORS: Number of entries in IPv6 neighbor cache */ #define LWIP_ND6_NUM_NEIGHBORS CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS /* --------------------------------------- ---------- Hook options --------------- --------------------------------------- */ #define LWIP_HOOK_FILENAME "lwip_default_hooks.h" #define LWIP_HOOK_IP4_ROUTE_SRC ip4_route_src_hook /* --------------------------------------- ---------- Debugging options ---------- --------------------------------------- */ /** * ETHARP_DEBUG: Enable debugging in etharp.c. */ #ifdef CONFIG_LWIP_ETHARP_DEBUG #define ETHARP_DEBUG LWIP_DBG_ON #else #define ETHARP_DEBUG LWIP_DBG_OFF #endif /** * NETIF_DEBUG: Enable debugging in netif.c. */ #ifdef CONFIG_LWIP_NETIF_DEBUG #define NETIF_DEBUG LWIP_DBG_ON #else #define NETIF_DEBUG LWIP_DBG_OFF #endif /** * PBUF_DEBUG: Enable debugging in pbuf.c. */ #ifdef CONFIG_LWIP_PBUF_DEBUG #define PBUF_DEBUG LWIP_DBG_ON #else #define PBUF_DEBUG LWIP_DBG_OFF #endif /** * API_LIB_DEBUG: Enable debugging in api_lib.c. */ #ifdef CONFIG_LWIP_API_LIB_DEBUG #define API_LIB_DEBUG LWIP_DBG_ON #else #define API_LIB_DEBUG LWIP_DBG_OFF #endif /** * SOCKETS_DEBUG: Enable debugging in sockets.c. */ #ifdef CONFIG_LWIP_SOCKETS_DEBUG #define SOCKETS_DEBUG LWIP_DBG_ON #else #define SOCKETS_DEBUG LWIP_DBG_OFF #endif /** * ICMP_DEBUG: Enable debugging in icmp.c. */ #ifdef CONFIG_LWIP_ICMP_DEBUG #define ICMP_DEBUG LWIP_DBG_ON #else #define ICMP_DEBUG LWIP_DBG_OFF #endif #ifdef CONFIG_LWIP_ICMP6_DEBUG #define ICMP6_DEBUG LWIP_DBG_ON #else #define ICMP6_DEBUG LWIP_DBG_OFF #endif /** * DHCP_DEBUG: Enable debugging in dhcp.c. */ #ifdef CONFIG_LWIP_DHCP_DEBUG #define DHCP_DEBUG LWIP_DBG_ON #else #define DHCP_DEBUG LWIP_DBG_OFF #endif /** * IP_DEBUG: Enable debugging for IP. */ #ifdef CONFIG_LWIP_IP_DEBUG #define IP_DEBUG LWIP_DBG_ON #else #define IP_DEBUG LWIP_DBG_OFF #endif /** * IP6_DEBUG: Enable debugging for IP6. */ #ifdef CONFIG_LWIP_IP6_DEBUG #define IP6_DEBUG LWIP_DBG_ON #else #define IP6_DEBUG LWIP_DBG_OFF #endif /** * TCP_DEBUG: Enable debugging for TCP. */ #ifdef CONFIG_LWIP_TCP_DEBUG #define TCP_DEBUG LWIP_DBG_ON #else #define TCP_DEBUG LWIP_DBG_OFF #endif /** * MEMP_DEBUG: Enable debugging in memp.c. */ #define MEMP_DEBUG LWIP_DBG_OFF /** * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. */ #define TCP_INPUT_DEBUG LWIP_DBG_OFF /** * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. */ #define TCP_OUTPUT_DEBUG LWIP_DBG_OFF /** * TCPIP_DEBUG: Enable debugging in tcpip.c. */ #define TCPIP_DEBUG LWIP_DBG_OFF /** * TCP_OOSEQ_DEBUG: Enable debugging in tcpin.c for OOSEQ. */ #define TCP_OOSEQ_DEBUG LWIP_DBG_OFF /** * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be * updated with the source MAC and IP addresses supplied in the packet. * You may want to disable this if you do not trust LAN peers to have the * correct addresses, or as a limited approach to attempt to handle * spoofing. If disabled, lwIP will need to make a new ARP request if * the peer is not already in the ARP table, adding a little latency. * The peer *is* in the ARP table if it requested our address before. * Also notice that this slows down input processing of every IP packet! */ #define ETHARP_TRUST_IP_MAC CONFIG_LWIP_ETHARP_TRUST_IP_MAC /** * POSIX I/O functions are mapped to LWIP via the VFS layer * (see port/vfs_lwip.c) */ #define LWIP_POSIX_SOCKETS_IO_NAMES 0 /** * FD_SETSIZE from sys/types.h is the maximum number of supported file * descriptors and CONFIG_LWIP_MAX_SOCKETS defines the number of sockets; * LWIP_SOCKET_OFFSET is configured to use the largest numbers of file * descriptors for sockets. File descriptors from 0 to LWIP_SOCKET_OFFSET-1 * are non-socket descriptors and from LWIP_SOCKET_OFFSET to FD_SETSIZE are * socket descriptors. */ #define LWIP_SOCKET_OFFSET (FD_SETSIZE - CONFIG_LWIP_MAX_SOCKETS) /* Enable all Espressif-only options */ #define ESP_LWIP 1 #define ESP_LWIP_ARP 1 #define ESP_PER_SOC_TCP_WND 0 #define ESP_THREAD_SAFE 1 #define ESP_THREAD_SAFE_DEBUG LWIP_DBG_OFF #define ESP_DHCP 1 #define ESP_DNS 1 #define ESP_PERF 0 #define ESP_RANDOM_TCP_PORT 1 #define ESP_IP4_ATON 1 #define ESP_LIGHT_SLEEP 1 #define ESP_L2_TO_L3_COPY CONFIG_LWIP_L2_TO_L3_COPY #define ESP_STATS_MEM CONFIG_LWIP_STATS #define ESP_STATS_DROP CONFIG_LWIP_STATS #define ESP_STATS_TCP 0 #define ESP_DHCPS_TIMER 1 #define ESP_LWIP_LOGI(...) ESP_LOGI("lwip", __VA_ARGS__) #define ESP_PING 1 #define ESP_HAS_SELECT 1 #define ESP_AUTO_RECV 1 #define ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP #define ESP_IP4_ROUTE 1 #define ESP_AUTO_IP 1 #define ESP_PBUF 1 #define ESP_PPP 1 #define ESP_IPV6 1 #define ESP_SOCKET 1 #define ESP_LWIP_SELECT 1 #define ESP_LWIP_LOCK 1 #ifdef CONFIG_LWIP_IPV6_AUTOCONFIG #define ESP_IPV6_AUTOCONFIG CONFIG_LWIP_IPV6_AUTOCONFIG #endif #ifdef ESP_IRAM_ATTR #undef ESP_IRAM_ATTR #endif #define ESP_IRAM_ATTR #ifdef CONFIG_LWIP_TIMERS_ONDEMAND #define ESP_LWIP_IGMP_TIMERS_ONDEMAND 1 #define ESP_LWIP_MLD6_TIMERS_ONDEMAND 1 #else #define ESP_LWIP_IGMP_TIMERS_ONDEMAND 0 #define ESP_LWIP_MLD6_TIMERS_ONDEMAND 0 #endif #define TCP_SND_BUF CONFIG_LWIP_TCP_SND_BUF_DEFAULT #define TCP_WND CONFIG_LWIP_TCP_WND_DEFAULT /** * LWIP_DEBUG: Enable lwip debugging in other modules. */ #define LWIP_DEBUG LWIP_DBG_OFF #define CHECKSUM_CHECK_UDP CONFIG_LWIP_CHECKSUM_CHECK_UDP #define CHECKSUM_CHECK_IP CONFIG_LWIP_CHECKSUM_CHECK_IP #define CHECKSUM_CHECK_ICMP CONFIG_LWIP_CHECKSUM_CHECK_ICMP #define LWIP_NETCONN_FULLDUPLEX 1 #define LWIP_NETCONN_SEM_PER_THREAD 1 #define LWIP_DHCP_MAX_NTP_SERVERS CONFIG_LWIP_DHCP_MAX_NTP_SERVERS #define LWIP_TIMEVAL_PRIVATE 0 /* -------------------------------------- ------------ SNTP options ------------ -------------------------------------- */ /* * SNTP update delay - in milliseconds */ /** Set this to 1 to support DNS names (or IP address strings) to set sntp servers * One server address/name can be defined as default if SNTP_SERVER_DNS == 1: * \#define SNTP_SERVER_ADDRESS "pool.ntp.org" */ #define SNTP_SERVER_DNS 1 // It disables a check of SNTP_UPDATE_DELAY it is done in sntp_set_sync_interval #define SNTP_SUPPRESS_DELAY_CHECK #define SNTP_UPDATE_DELAY (sntp_get_sync_interval()) #define SNTP_SET_SYSTEM_TIME_US(sec, us) \ do { \ struct timeval tv = { .tv_sec = sec, .tv_usec = us }; \ sntp_sync_time(&tv); \ } while (0); #define SNTP_GET_SYSTEM_TIME(sec, us) \ do { \ struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; \ gettimeofday(&tv, NULL); \ (sec) = tv.tv_sec; \ (us) = tv.tv_usec; \ sntp_set_sync_status(SNTP_SYNC_STATUS_RESET); \ } while (0); #define SOC_SEND_LOG //printf #endif /* __LWIPOPTS_H__ */