# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps

examples/system/app_trace_basic:
  disable:
    - if: IDF_TARGET in ["esp32c6", "esp32h2", "esp32p4"]
      temporary: true
      reason: target esp32c6, esp32h2, esp32p4 is not supported yet

examples/system/base_mac_address:
  depends_components:
    - esp_hw_support

examples/system/console/advanced:
  disable_test:
    - if: IDF_TARGET not in ["esp32", "esp32c3"]
      reason: Sufficient to run this app on one chip with each architecture
  depends_components:
    - console
    - vfs

examples/system/console/advanced_usb_cdc:
  disable:
    - if: SOC_USB_OTG_SUPPORTED != 1 or IDF_TARGET == "esp32p4" # TODO: IDF-8078, IDF-9120 and IDF-9133
  depends_components:
    - console
    - vfs

examples/system/console/basic:
  disable_test:
    - if: IDF_TARGET not in ["esp32", "esp32c3"]
      reason: Sufficient to run this app on one chip with each architecture
  depends_components:
    - console
    - vfs

examples/system/deep_sleep:
  disable:
    - if: SOC_DEEP_SLEEP_SUPPORTED != 1

examples/system/deep_sleep_wake_stub:
  disable:
    - if: IDF_TARGET in ["esp32c2", "esp32p4"]
      temporary: true
      reason: target(s) is not supported yet

examples/system/efuse:
  disable:
    - if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
      reason: no target specific functionality, testing on a single target is sufficient
  depends_components:
    - efuse
    - bootloader_support

examples/system/esp_timer:
  disable:
    - if: SOC_LIGHT_SLEEP_SUPPORTED != 1
  depends_components:
    - esp_timer

examples/system/eventfd:
  disable:
    - if: SOC_GPTIMER_SUPPORTED != 1 and (IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux"))
      reason: no target specific functionality, testing on a single target is sufficient
  depends_components:
    - vfs
    - esp_driver_gptimer

examples/system/flash_suspend:
  enable:
    - if: IDF_TARGET == "esp32c3"
      temporary: true
      reason: the other targets are not tested yet

examples/system/freertos:
  disable:
    - if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
      reason: no target specific functionality, testing on a single target is sufficient
  depends_components:
    - freertos

examples/system/gcov:
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: lack of runners

examples/system/gdbstub:
  disable:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: not supported yet #TODO: IDF-7510

examples/system/heap_task_tracking:
  disable:
    - if: IDF_TARGET != "esp32c3" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
      reason: no target specific functionality, testing on a single target is sufficient
  depends_components:
    - heap

examples/system/himem:
  enable:
    - if: IDF_TARGET == "esp32"
      reason: Feature is only needed/supported on ESP32

examples/system/ipc/ipc_isr/riscv:
  enable:
    - if: IDF_TARGET_ARCH_RISCV == 1 and ESP_IPC_ISR_ENABLE == 1
      reason: The test is intended only for multi-core chips
  disable_test:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: lack of runners
  depends_components:
    - esp_system

examples/system/ipc/ipc_isr/xtensa:
  enable:
    - if: IDF_TARGET_ARCH_XTENSA == 1 and ESP_IPC_ISR_ENABLE == 1
      reason: The test is intended only for multi-core chips
  depends_components:
    - esp_system

examples/system/light_sleep:
  disable:
    - if: SOC_LIGHT_SLEEP_SUPPORTED != 1

examples/system/ota/advanced_https_ota:
  disable:
    - if: IDF_TARGET in ["esp32h2", "esp32p4"]
      temporary: true
      reason: target esp32h2 is not supported yet, esp32p4 is not supported with bluedroid/nimble case
  disable_test:
    - if: IDF_TARGET not in ["esp32", "esp32c3", "esp32s3"]
      temporary: true
      reason: lack of runners
  depends_components:
    - app_update
    - esp_https_ota
    - esp_http_client
    # different configs need different components
    - esp_eth
    - esp_wifi
    - esp_phy
    - bt
  depends_filepatterns:
    - examples/common_components/protocol_examples_common/**/*

examples/system/ota/native_ota_example:
  disable:
    - if: IDF_TARGET in ["esp32h2"]
      temporary: true
      reason: target esp32h2 is not supported yet
  disable_test:
    - if: IDF_TARGET != "esp32"
      reason: Only esp32 has ethernet runners
  depends_components:
    - app_update
    - esp_https_ota
    - esp_http_client
    - esp_eth
    - esp_driver_gpio
    - bootloader_support
  depends_filepatterns:
    - examples/common_components/protocol_examples_common/**/*

examples/system/ota/otatool:
  disable:
    - if: IDF_TARGET in ["esp32h2"]
      temporary: true
      reason: target esp32h2 is not supported yet

examples/system/ota/pre_encrypted_ota:
  disable:
    - if: IDF_TARGET in ["esp32h2"]
      temporary: true
      reason: target esp32h2 is not supported yet
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: Only esp32 has ethernet runners
  depends_components:
    - app_update
    - esp_https_ota
    - esp_http_client
    - esp_eth
    - mbedtls
    - bootloader_support
  depends_filepatterns:
    - examples/common_components/protocol_examples_common/**/*

examples/system/ota/simple_ota_example:
  disable:
    - if: IDF_TARGET in ["esp32h2", "esp32p4"]
      temporary: true
      reason: target esp32h2, esp32p4 is not supported yet
    - if: CONFIG_NAME == "spiram" and SOC_SPIRAM_SUPPORTED != 1
  disable_test:
    - if: IDF_TARGET not in ["esp32", "esp32c3", "esp32s3"]
      temporary: true
      reason: lack of runners
  depends_components:
    - app_update
    - esp_https_ota
    - esp_http_client
    # different configs need different components
    - esp_eth
    - esp_wifi
    - esp_phy
    - mbedtls

examples/system/perfmon:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32s2", "esp32s3"] and NIGHTLY_RUN == "1"
      reason: xtensa only feature
    - if: IDF_TARGET == "esp32"
      reason: testing on a single target is sufficient
  depends_components:
    - perfmon

examples/system/pthread:
  disable:
    - if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
      reason: no target specific functionality, testing on a single target is sufficient
  depends_components:
    - pthread

examples/system/select:
  disable:
    - if: IDF_TARGET != "esp32c3" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
      reason: no target specific functionality, testing on a single target is sufficient
  depends_components:
    - vfs

examples/system/sysview_tracing:
  disable:
    - if: SOC_GPTIMER_SUPPORTED != 1
    - if: IDF_TARGET in ["esp32p4"]
      temporary: true
      reason: not supported on esp32p4
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: lack of runners

examples/system/sysview_tracing_heap_log:
  disable:
    - if: SOC_GPTIMER_SUPPORTED != 1
    - if: IDF_TARGET in ["esp32p4"]
      temporary: true
      reason: not supported on esp32p4
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: lack of runners

examples/system/task_watchdog:
  disable:
    - if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
      reason: no target specific functionality, testing on a single target is sufficient
  depends_components:
    - esp_system

examples/system/ulp/lp_core/gpio:
  enable:
    - if: SOC_LP_CORE_SUPPORTED == 1
  disable:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: target esp32p4 is not supported yet, TODO IDF-7536
  depends_components:
    - ulp

examples/system/ulp/lp_core/lp_i2c:
  enable:
    - if: SOC_LP_I2C_SUPPORTED == 1
  disable:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: target esp32p4 is not supported yet, TODO IDF-9407
  depends_components:
    - ulp

examples/system/ulp/lp_core/lp_uart/lp_uart_echo:
  disable:
    - if: SOC_ULP_LP_UART_SUPPORTED != 1
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: target esp32p4 is not supported yet TODO IDF-9407
  depends_components:
    - ulp

examples/system/ulp/lp_core/lp_uart/lp_uart_print:
  disable:
    - if: SOC_ULP_LP_UART_SUPPORTED != 1
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: target esp32p4 is not supported yet TODO IDF-9407
  depends_components:
    - ulp

examples/system/ulp/ulp_fsm/ulp:
  disable:
    - if: SOC_ULP_FSM_SUPPORTED != 1
  depends_components:
    - ulp

examples/system/ulp/ulp_fsm/ulp_adc:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32s3"]
      temporary: true
      reason: the other targets are not tested yet
  depends_components:
    - ulp

examples/system/ulp/ulp_riscv/adc:
  enable:
    - if: SOC_RISCV_COPROC_SUPPORTED == 1
  depends_components:
    - ulp

examples/system/ulp/ulp_riscv/ds18b20_onewire:
  enable:
    - if: IDF_TARGET == "esp32s2"
      temporary: true
      reason: the other targets are not tested yet
  depends_components:
    - ulp

examples/system/ulp/ulp_riscv/gpio:
  enable:
    - if: SOC_RISCV_COPROC_SUPPORTED == 1
  depends_components:
    - ulp

examples/system/ulp/ulp_riscv/gpio_interrupt:
  enable:
    - if: SOC_RISCV_COPROC_SUPPORTED == 1
  depends_components:
    - ulp

examples/system/ulp/ulp_riscv/i2c:
  enable:
    - if: SOC_RISCV_COPROC_SUPPORTED == 1
  depends_components:
    - ulp

examples/system/ulp/ulp_riscv/interrupts:
  enable:
    - if: SOC_RISCV_COPROC_SUPPORTED == 1
  depends_components:
    - ulp

examples/system/ulp/ulp_riscv/touch:
  enable:
    - if: SOC_RISCV_COPROC_SUPPORTED == 1
  depends_components:
    - ulp

examples/system/ulp/ulp_riscv/uart_print:
  enable:
    - if: SOC_RISCV_COPROC_SUPPORTED == 1
  depends_components:
    - ulp

examples/system/unit_test/:
  disable:
    - if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
      reason: no target specific functionality, testing on a single target is sufficient
  depends_components:
    - unity

examples/system/xip_from_psram:
  enable:
    - if: SOC_SPIRAM_SUPPORTED == 1
      reason: this feature is supported on chips that have PSRAM
  disable:
    - if: IDF_TARGET == "esp32"
      reason: target esp32 doesn't support this feature.
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: not supported on p4 #TODO: IDF-7556