test cases: - CI ready: 'Yes' ID: TCPIP_UDP_0101 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 C BIND:ERROR - - SSC SSC1 soc -B -t TCP -p - - R SSC1 RE BIND:(\d+),OK execution time: 0.0 expected result: |- 1.OK 2.OK 3.ERROR 4.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上创建TCP socket3, target_udp_port1 sub module: UDP summary: STA mode, udp bind test. use different ip, port test environment: SSC_T1_6 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0102 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 2/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SOC SOC2 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 10 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 10 - - SSC SSC1 soc -S -s -i -p -l 10 - - P SSC1 RE SEND:(\d+),OK - P SOC2 UL 10 execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.PC上SOC2 UDP传输，bing 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上使用步骤3创建的socket1，往pc_ip，test_tcp_port1上发送10字节数据 5.target1上使用步骤3创建的socket1，往pc_ip2，test_tcp_port2上发送10字节数据 sub module: UDP summary: STA mode, sendto test. use different ip, port test environment: SSC_T1_9 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0103 SDK: |- 8266_NonOS 8266_RTOS Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 1 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 1 - - SSC SSC1 soc -S -s -i -p -l 1472 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 1472 - - SSC SSC1 soc -S -s -i -p -l 1473 - - P SSC1 RE SEND:(\d+),OK - P SOC_COM NC SOC_RECVFROM - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 -j 20 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 14720 execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK,没有到UDP包 6.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据 sub module: UDP summary: STA mode, sendto test with different length test environment: SSC_T1_6 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0103 SDK: ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 1 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 1 - - SSC SSC1 soc -S -s -i -p -l 1472 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 1472 - - SSC SSC1 soc -S -s -i -p -l 1473 - - P SSC1 RE SEND:(\d+),OK - P SOC_COM NC SOC_RECVFROM execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 sub module: UDP summary: STA mode, sendto test with different length test environment: SSC_T1_6 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0104 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SOC SOC1 SENDTO 1 - - R SSC1 SL +1 - - SOC SOC1 SENDTO 1472 - - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,) - - SOC SOC1 SENDTO 1473 - - P SSC1 NC +RECVFROM - P SOC_COM C OK - - SOC SOC2 BIND - - R SOC_COM L OK - - SOC SOC2 SENDTO 1472 - - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,) execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK,没收到UDP包 6.OK 7.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.PC往8266上发送1字节数据 4.PC往8266上发送1472字节数据 5.PC往8266上发送1473字节数据 6.PC上SOC2 UDP传输，bing 7.PC往8266上发送1472字节数据 sub module: UDP summary: STA mode, recvfrom basic test test environment: SSC_T1_9 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0105 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -T -s - - R SSC1 RE CLOSE:\d+ execution time: 0.0 expected result: |- 1.OK 2.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.关闭socket1 sub module: UDP summary: STA mode, close UDP sockets test test environment: SSC_T1_6 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0106 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK execution time: 0.0 expected result: |- 1.ok 2.ok 3.ok 4.ok 5.ok initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5 sub module: UDP summary: STA mode, create max udp socket test test environment: SSC_T1_6 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0107 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -I - - P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,) execution time: 0.0 expected result: |- 1.OK 2.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上查询创建socket信息 sub module: UDP summary: STA mode, UDP get active socket info test test environment: SSC_T1_6 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0108 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 C BIND:ERROR - - SSC SSC1 soc -B -t TCP -p - - R SSC1 RE BIND:(\d+),OK execution time: 0.0 expected result: |- 1.OK 2.OK 3.ERROR 4.OK initial condition: APM2 level: Integration module: TCPIP steps: |- 1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上创建TCP socket3, target_udp_port1 sub module: UDP summary: AP mode, udp bind test. use different ip, port test environment: SSC_T1_8 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0109 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - - R SSC1 C +SAP:OK - - WIFI CONN - - R PC_COM NC ERROR C +WIFICONN:OK - - SSC SSC2 sta -C -s -p - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%() - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC2 ip - - R SSC2 A :STAIP:(.+)\r\n - - SSC SSC2 soc -B -t UDP -p - - R SSC2 A :BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 5 - - R SOC1 UL 5 - - SSC SSC1 soc -S -s -i -p -l 5 - - R SSC2 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,) execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK initial condition: T2O_1 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.PC上SOC2 UDP传输，bing 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上使用步骤3创建的socket1，往pc_ip，test_tcp_port1上发送10字节数据 5.target1上使用步骤3创建的socket1，往pc_ip2，test_tcp_port2上发送10字节数据 sub module: UDP summary: AP mode, sendto test. use different ip, port test environment: SSC_T2_2 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0110 SDK: |- 8266_NonOS 8266_RTOS Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 1 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 1 - - SSC SSC1 soc -S -s -i -p -l 1472 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 1472 - - SSC SSC1 soc -S -s -i -p -l 1473 - - P SSC1 RE SEND:(\d+),OK - P SOC_COM NC SOC_RECVFROM - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 -j 20 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 14720 execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK,没收到UDP包 6.OK initial condition: APM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据 sub module: UDP summary: AP mode, sendto test with different length test environment: SSC_T1_7 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0110 SDK: ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 1 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 1 - - SSC SSC1 soc -S -s -i -p -l 1472 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 1472 - - SSC SSC1 soc -S -s -i -p -l 1473 - - P SSC1 RE SEND:(\d+),OK - P SOC_COM C SOC_RECVFROM execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK initial condition: APM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 sub module: UDP summary: AP mode, sendto test with different length test environment: SSC_T1_7 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0111 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - - R SSC1 C +SAP:OK - - WIFI CONN - - R PC_COM NC ERROR C +WIFICONN:OK - - SSC SSC2 sta -C -s -p - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%() - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC2 ip - - R SSC2 A :STAIP:(.+)\r\n - - SSC SSC2 soc -B -t UDP -p - - R SSC2 A :BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SOC SOC1 SENDTO 5 - - R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,) - - SSC SSC2 soc -S -s -i -p -l 5 - - R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,) execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK,没收到UDP包 6.OK 7.OK initial condition: T2O_1 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.PC往8266上发送1字节数据 4.PC往8266上发送1472字节数据 5.PC往8266上发送1473字节数据 6.PC上SOC2 UDP传输，bing 7.PC往8266上发送1472字节数据 sub module: UDP summary: AP mode, recvfrom basic test test environment: SSC_T2_2 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0112 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -T -s - - R SSC1 RE CLOSE:\d+ execution time: 0.0 expected result: |- 1.OK 2.OK initial condition: APM2 level: Integration module: TCPIP steps: |- 1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.关闭socket1 sub module: UDP summary: AP mode, close UDP sockets test test environment: SSC_T1_8 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0113 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 RE BIND:(\d+),OK execution time: 0.0 expected result: |- 1.ok 2.ok 3.ok 4.ok 5.ok initial condition: APM2 level: Integration module: TCPIP steps: |- 1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5 sub module: UDP summary: AP mode, create max udp socket test test environment: SSC_T1_8 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0114 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -I - - P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,) execution time: 0.0 expected result: |- 1.OK 2.OK initial condition: APM2 level: Integration module: TCPIP steps: |- 1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上查询创建socket信息 sub module: UDP summary: AP mode, UDP get active socket info test test environment: SSC_T1_8 test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0201 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p -w 0 - - R SSC1 A :BIND:(\d+),OK - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.PC OK 5.PC OK 6.PC OK 7.PC OK 8.PC OK SOC_CLOSE=SOC1 initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上关闭工作线程 4.PC往8266上发送1472字节数据 5.PC往8266上发送1472字节数据 6.PC往8266上发送1472字节数据 7.PC往8266上发送1472字节数据 8.PC往8266上发送1472字节数据 sub module: UDP summary: STA mode, UDP recv buffer test test environment: SSC_T1_6 test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_UDP_0202 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' - - SOC SOC1 SENDTO 1472 - - '' execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.PC OK 5.PC OK 6.PC OK 7.PC OK 8.PC OK SOC_CLOSE=SOC1 initial condition: APM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上关闭工作线程 4.PC往8266上发送1472字节数据 5.PC往8266上发送1472字节数据 6.PC往8266上发送1472字节数据 7.PC往8266上发送1472字节数据 8.PC往8266上发送1472字节数据 sub module: UDP summary: AP mode, UDP recv buffer test test environment: SSC_T1_7 test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_UDP_0301 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -i -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 5 - - SSC SSC1 sta -D - - P SSC1 C +QAP:OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:\d+,ERROR execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.ERROR initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 4.断开与AP 连接 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 sub module: UDP summary: do UDP send after WIFI disconnected test environment: SSC_T1_6 test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0302 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 2/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 5 - - SSC SSC1 sta -D - - P SSC1 C +QAP:OK - - SSC SSC1 soc -T -s - - R SSC1 RE CLOSE:\d+,OK execution time: 0.0 expected result: | 1.OK 2.OK 3.OK 4.OK 5.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 4.断开与AP 连接 5.关闭建立的socket1连接 sub module: UDP summary: "close UDP socket after WIFI \ndisconnected" test environment: SSC_T1_6 test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0303 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 5 - - SSC SSC1 op -S -o 2 - - P SSC1 C +MODE:OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:(\d+),OK execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.ERROR initial condition: STAM2 level: Integration module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n4.修改8266的Mode为softAP mode \n5.8266往PC上发送5字节数据" sub module: UDP summary: do UDP send after mode changed test environment: SSC_T1_6 test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0304 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 5 - - SSC SSC1 op -S -o 2 - - P SSC1 C +MODE:OK - - SSC SSC1 soc -T -s - - R SSC1 RE CLOSE:\d+,OK execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK initial condition: STAM2 level: Integration module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n4.修改8266的Mode为softAP mode \n5.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after mode changed test environment: SSC_T1_6 test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0305 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 5 - - NIC DISABLED - - R PC_COM C OK - - SSC SSC1 soc -T -s - - R SSC1 RE CLOSE:\d+,OK execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK 4.OK 5.OK initial condition: STAM2 level: Integration module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n4.PC上网卡禁止掉 \n5.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after PC NIC disabled test environment: SSC_T1_6 test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0306 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 5 - - SSC SSC1 dhcp -E -o 1 - - R SSC1 C +DHCP:STA,OK - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - - P SSC1 C +IP:OK - - SSC SSC1 ip -Q -o 1 - - R SSC1 C +STAIP:192.168.111.210 - - SSC SSC1 soc -S -s -i -p -l 1 - - P SSC1 RE SEND:\d+,OK execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK initial condition: STAM2 level: Integration module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.8266往PC上发送5字节数据" sub module: UDP summary: do UDP send after IP changed test environment: SSC_T1_6 test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0307 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC allow fail: 1/3 auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - - R SOC_COM L OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -S -s -i -p -l 5 - - P SSC1 RE SEND:(\d+),OK - P SOC1 UL 5 - - SSC SSC1 dhcp -E -o 1 - - R SSC1 C +DHCP:STA,OK - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - - P SSC1 C +IP:OK - - SSC SSC1 ip -Q -o 1 - - R SSC1 C +STAIP:192.168.111.210 - - SSC SSC1 soc -T -s - - R SSC1 RE CLOSE:\d+,OK execution time: 0.0 expected result: |- 1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK initial condition: STAM2 level: Integration module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after IP changed test environment: SSC_T1_6 test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0401 SDK: |- 8266_RTOS ESP32_IDF Test App: SSC allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 C +BIND:ERROR execution time: 0.0 expected result: |- 1.OK 2.ERROR initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.target1上创建UDP socket,bind test_udp_port1 2.target1上创建UDP socket,bind test_udp_port1 sub module: UDP summary: Test socket with so_reuseaddr option closed on UDP submodule test environment: SSC_T1_6 test point 1: basic function test point 2: socket test with different option version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0402 SDK: ESP32_IDF Test App: SSC_OPTION allow fail: '' auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK execution time: 0.0 expected result: |- 1.OK 2.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.find esp-idf/components/lwip/include/lwip/lwip/opt.h file, make "#define SO_REUSE 1" instead of "#define SO_REUSE 0" 2.switch to esp-idf/SSC, run "./gen_misc_ng.sh SSC_OPTION" and "make flash", then run the test case normally 3.target1上创建UDP socket,bind test_udp_port1 4.target1上创建UDP socket,bind test_udp_port1 sub module: UDP summary: Test socket with so_reuseaddr option opened that build two udp sockets by binding same port on ESP32 test environment: SSC_T1_6 test point 1: basic function test point 2: socket test with different option version: v1 (2016-8-15) - CI ready: 'No' ID: TCPIP_UDP_0403 SDK: 8266_RTOS Test App: SSC allow fail: '' auto test: 'No' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK - - SSC SSC1 soc -B -t UDP -p - - R SSC1 A :BIND:(\d+),OK execution time: 0.0 expected result: |- 1.OK 2.OK initial condition: STAM2 level: Integration module: TCPIP steps: |- 1.find ESP8266_RTOS_SDK/include/lwip/lwip/opt.h file, make "#define SO_REUSE 1" instead of "#define SO_REUSE 0" 2.switch to ESP8266_RTOS_SDK/third_party, run "./make_lib.sh lwip" risc,then continuely run "ll ../lib" 3.switch to ESP8266_RTOS_SDK/SSC, run "./gen_misc_rtos.sh SSC", then run the test case normally 4.target1上创建UDP socket,bind test_udp_port1 5.target1上创建UDP socket,bind test_udp_port1 sub module: UDP summary: Test socket with so_reuseaddr option opened that build two udp sockets by binding same port on 8266_RTOS test environment: SSC_T1_6 test point 1: basic function test point 2: socket test with different option version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_5001 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/UDPSendRecv - - send_len = 1460 - - dummy - - test_time = 300 - - '' - - duplex = True - - '' - - conn_num = 5 - - '' - - send_delay = 20 - - '' execution time: 12.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: T2_1 level: Integration module: TCPIP steps: |- 1. sta connect to softap 2. create multiple udp 3. do send/recv on all udp sub module: UDP summary: UDP send/recv stress test test environment: SSC_T2_5 test point 1: stress test point 2: UDP stress test version: v2 (2016-11-15) - CI ready: 'No' ID: TCPIP_UDP_5002 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/UDPPacketLose - - test_time = 5 - - dummy - - send_len = 1460 - - '' - - pc_send = True - - '' - - target_send = False - - '' - - delay = 10 - - '' execution time: 1.0 expected result: |- 1. succeed 2. succeed initial condition: STAM2 level: Integration module: TCPIP steps: |- 1. scan AP to get AP RSSI 2. create UDP and recv data for several seconds sub module: UDP summary: UDP loss rate on DUT Rx test environment: SSC_T1_6 test point 1: Performance test test point 2: UDP stress test version: v1 (2016-10-18) - CI ready: 'No' ID: TCPIP_UDP_5003 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/UDPPacketLose - - test_time = 5 - - dummy - - send_len = 1460 - - '' - - pc_send = False - - '' - - target_send = True - - '' - - delay = 10 - - '' execution time: 1.0 expected result: |- 1. succeed 2. succeed initial condition: STAM2 level: Integration module: TCPIP steps: |- 1. scan AP to get AP RSSI 2. create UDP and recv data for several seconds sub module: UDP summary: UDP loss rate on DUT Tx test environment: SSC_T1_6 test point 1: Performance test test point 2: UDP stress test version: v1 (2016-10-18) - CI ready: 'No' ID: TCPIP_UDP_5004 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/UDPBroadcast - - test_time = 30 - - dummy - - send_len = 20 - - '' - - pc_send = True - - '' - - target_send = False - - '' - - delay = 10 - - '' execution time: 1.0 expected result: |- 1. succeed 2. succeed initial condition: STAM2 level: Integration module: TCPIP steps: |- 1. scan AP to get AP RSSI 2. create UDP and recv data for several seconds sub module: UDP summary: UDP broadcase loss rate on DUT Rx test environment: SSC_T1_6 test point 1: Performance test test point 2: UDP stress test version: v1 (2016-10-18) - CI ready: 'No' ID: TCPIP_UDP_5005 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/UDPMultiSTASendRecv - - send_len = 1460 - - dummy - - test_time = 300 - - '' - - server_echo = True - - '' - - sta_number = 5 - - '' - - send_delay = 500 - - '' execution time: 5.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: None level: Integration module: TCPIP steps: |- 1. 5 sta connect to softap 2. create udp socket on all sta 3. all sta do udp send/recv sub module: UDP summary: 1 SoftAP 5 STA, create UDP server on one STA, create UDP client on other STA, do UDP send/recv test environment: SSC_T6_1 test point 1: stress test point 2: UDP stress test version: v1 (2016-8-15) - CI ready: 'No' ID: TCPIP_UDP_5006 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/UDPSTAMultiSocketSendRecv - - send_len = 1460 - - dummy - - test_time = 300 - - '' - - server_echo = True - - '' - - sta_number = 2 - - '' - - conn_number = 6 - - '' - - send_delay = 500 - - '' execution time: 5.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: None level: Integration module: TCPIP steps: |- 1. 2 sta connect to softap 2. create multi udp socket on all sta 3. all sta do udp send/recv sub module: UDP summary: 1 SoftAP 2 STA, create multi UDP socket on STA, do UDP send/recv test environment: SSC_T3_1 test point 1: stress test point 2: UDP stress test version: v1 (2016-8-15) - CI ready: 'No' ID: TCPIP_UDP_5007 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/SoftAPSTAUDPLose - - test_time = 60 - - dummy - - send_len = 1460 - - '' - - softap_send = False - - '' - - sta_send = True - - '' - - delay = 10 - - '' execution time: 1.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: T2_1 level: Integration module: TCPIP steps: |- 1.sta connect to softAP 2.sta softAP bind UPD socket 3.sta send UDP to softAP, softAP calculate the packet lose sub module: UDP summary: STA connect to softAP, STA send UDP to softAP, calculate the UDP lose on softAP test environment: SSC_T2_5 test point 1: Performance test test point 2: UDP stress test version: v1 (2016-10-18) - CI ready: 'No' ID: TCPIP_UDP_5008 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/SoftAPSTAUDPLose - - test_time = 60 - - dummy - - send_len = 1460 - - '' - - softap_send = True - - '' - - sta_send = False - - '' - - delay = 10 - - '' execution time: 1.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: T2_1 level: Integration module: TCPIP steps: |- 1.sta connect to softAP 2.sta softAP bind UPD socket 3.softAP send UDP to STA, STA calculate the packet lose sub module: UDP summary: STA connect to softAP, softAP send UDP to STA, calculate the UDP lose on STA test environment: SSC_T2_5 test point 1: Performance test test point 2: UDP stress test version: v1 (2016-10-18) - CI ready: 'No' ID: TCPIP_UDP_5101 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Performance cmd set: - UDPStress/UDPThroughput - - send_len = 1460 - - dummy - - tx_enable = True - - '' - - rx_enable = False - - '' - - measure_period = 30 - - '' execution time: 2.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: STAM1 level: Integration module: TCPIP steps: |- 1. config attenuator (0-59) 2. scan AP to get AP RSSI 3. create UDP and send data for several seconds Loop step 1 - 3 sub module: UDP summary: UDP throughput Tx in shield box test environment: SSC_T1_ShieldBox test point 1: performance test point 2: UDP throughput version: v1 (2016-8-15) - CI ready: 'No' ID: TCPIP_UDP_5102 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Performance cmd set: - UDPStress/UDPThroughput - - send_len = 1460 - - dummy - - tx_enable = False - - '' - - rx_enable = True - - '' - - measure_period = 30 - - '' execution time: 2.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: STAM1 level: Integration module: TCPIP steps: |- 1. config attenuator (0-59) 2. scan AP to get AP RSSI 3. create UDP and recv data for several seconds Loop step 1 - 3 sub module: UDP summary: UDP throughput Rx in shield box test environment: SSC_T1_ShieldBox test point 1: performance test point 2: UDP throughput version: v1 (2016-8-15) - CI ready: 'No' ID: TCPIP_UDP_5201 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/EthUDPThroughput - - send_len = 1460 - - dummy - - tx_enable = True - - '' - - rx_enable = False - - '' - - measure_period = 30 - - '' - - test_count = 5 - - '' execution time: 0.5 expected result: |- 1. succeed 2. succeed initial condition: T1_ETH level: Integration module: TCPIP steps: |- 1. DUT open eth and get ip 2. DUT band socket and send packet to PC for several secends Loop for step 1-2 sub module: UDP summary: UDP throughput Tx for Ethernet test environment: ETH_T1_1 test point 1: stress test point 2: UDP stress test version: v1 (2016-8-15) - CI ready: 'No' ID: TCPIP_UDP_5202 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/EthUDPThroughput - - send_len = 1460 - - dummy - - tx_enable = False - - '' - - rx_enable = True - - '' - - measure_period = 30 - - '' - - test_count = 5 - - '' execution time: 0.5 expected result: |- 1. succeed 2. succeed initial condition: T1_ETH level: Integration module: TCPIP steps: |- 1. DUT open eth and get ip 2. DUT band socket and PC send packet to DUT for several secends Loop for step 1-2 sub module: UDP summary: UDP throughput Rx for Ethernet test environment: ETH_T1_1 test point 1: stress test point 2: UDP stress test version: v1 (2016-8-15) - CI ready: 'No' ID: TCPIP_UDP_5301 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/EthUDPPacketLose - - test_time = 30 - - dummy - - send_len = 1460 - - '' - - pc_send = True - - '' - - target_send = False - - '' - - delay = 10 - - '' execution time: 0.5 expected result: |- 1. succeed 2. succeed initial condition: T1_ETH level: Integration module: TCPIP steps: |- 1. DUT open eth and get ip 2. DUT band socket,PC send packet to DUT for several secends 3. DUT calculate the packet lose rate sub module: UDP summary: UDP loss rate on DUT Rx for Eth test environment: ETH_T1_1 test point 1: Performance test test point 2: UDP stress test version: v1 (2016-10-18) - CI ready: 'No' ID: TCPIP_UDP_5401 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/UDPSoftAPSTAThroughput - - send_len = 1460 - - dummy - - sta_rx_enable = False - - '' - - sta_tx_enable = True - - '' - - measure_period = 15 - - '' execution time: 1.0 expected result: |- 1. succeed 2. succeed 3. succeed 4. succeed initial condition: T2_1 level: Integration module: TCPIP steps: |- 1. STA connect softAP 2. bind UDP socket 3. send UDP packet 4. calculate the troughput sub module: UDP summary: STA UDP throughput Tx while connected with softAP test environment: SSC_T2_ShieldBox2 test point 1: Performance test test point 2: UDP throughput version: v1 (2016-10-18) - CI ready: 'No' ID: TCPIP_UDP_5402 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: Stress cmd set: - UDPStress/UDPSoftAPSTAThroughput - - send_len = 1460 - - dummy - - sta_rx_enable = True - - '' - - sta_tx_enable = False - - '' - - measure_period = 15 - - '' execution time: 1.0 expected result: |- 1. succeed 2. succeed 3. succeed 4. succeed initial condition: T2_1 level: Integration module: TCPIP steps: |- 1. STA connect softAP 2. bind UDP socket 3. send UDP packet 4. calculate the troughput sub module: UDP summary: STA UDP throughput Rx while connected with softAP test environment: SSC_T2_ShieldBox2 test point 1: Performance test test point 2: UDP throughput version: v1 (2016-10-18) - CI ready: 'No' ID: TCPIP_UDP_9901 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: IOT cmd set: - UDPStress/UDPThroughputCompatibility - - send_len = 1460 - - dummy - - test_times = 10 - - '' - - tx_enable = True - - '' - - rx_enable = False - - '' - - measure_period = 30 - - '' execution time: 2.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: STAM1 level: Integration module: TCPIP steps: |- 1. scan AP to get AP RSSI 2. create TCP connection and send data for several seconds 3. calculate the throughput Loop step 1 - 3 sub module: UDP summary: UDP throughput Tx Compatibility test in shield box test environment: SSC_T1_ShieldBox test point 1: performance test point 2: UDP throughput Compatibility test version: v1 (2016-8-15) - CI ready: 'No' ID: TCPIP_UDP_9902 SDK: |- 8266_NonOS 8266_RTOS ESP32_IDF Test App: SSC auto test: 'Yes' category: IOT cmd set: - UDPStress/UDPThroughputCompatibility - - send_len = 1460 - - dummy - - test_times = 10 - - '' - - tx_enable = False - - '' - - rx_enable = True - - '' - - measure_period = 30 - - '' execution time: 2.0 expected result: |- 1. succeed 2. succeed 3. succeed initial condition: STAM1 level: Integration module: TCPIP steps: |- 1. scan AP to get AP RSSI 2. create TCP connection and send data for several seconds 3. calculate the throughput Loop step 1 - 3 sub module: UDP summary: UDP throughput Rx Compatibility test in shield box test environment: SSC_T1_ShieldBox test point 1: performance test point 2: UDP throughput Compatibility test version: v1 (2016-8-15)