config BT_BTC_TASK_STACK_SIZE int "Bluetooth event (callback to application) task stack size" depends on BT_BLUEDROID_ENABLED default 3072 help This select btc task stack size choice BT_BLUEDROID_PINNED_TO_CORE_CHOICE prompt "The cpu core which Bluedroid run" depends on BT_BLUEDROID_ENABLED && !FREERTOS_UNICORE help Which the cpu core to run Bluedroid. Can choose core0 and core1. Can not specify no-affinity. config BT_BLUEDROID_PINNED_TO_CORE_0 bool "Core 0 (PRO CPU)" config BT_BLUEDROID_PINNED_TO_CORE_1 bool "Core 1 (APP CPU)" depends on !FREERTOS_UNICORE endchoice config BT_BLUEDROID_PINNED_TO_CORE int depends on BT_BLUEDROID_ENABLED default 0 if BT_BLUEDROID_PINNED_TO_CORE_0 default 1 if BT_BLUEDROID_PINNED_TO_CORE_1 default 0 config BT_BTU_TASK_STACK_SIZE int "Bluetooth Bluedroid Host Stack task stack size" depends on BT_BLUEDROID_ENABLED default 4096 help This select btu task stack size config BT_BLUEDROID_MEM_DEBUG bool "Bluedroid memory debug" depends on BT_BLUEDROID_ENABLED default n help Bluedroid memory debug config BT_CLASSIC_ENABLED bool "Classic Bluetooth" depends on BT_BLUEDROID_ENABLED && IDF_TARGET_ESP32 default n help For now this option needs "SMP_ENABLE" to be set to yes config BT_A2DP_ENABLE bool "A2DP" depends on BT_CLASSIC_ENABLED default n help Advanced Audio Distrubution Profile config BT_SPP_ENABLED bool "SPP" depends on BT_CLASSIC_ENABLED default n help This enables the Serial Port Profile config BT_L2CAP_ENABLED bool "BT L2CAP" depends on BT_CLASSIC_ENABLED default n help This enables the Logical Link Control and Adaptation Layer Protocol. Only supported classic bluetooth. config BT_HFP_ENABLE bool "Hands Free/Handset Profile" depends on BT_CLASSIC_ENABLED default n choice BT_HFP_ROLE prompt "Hands-free Profile Role configuration" depends on BT_HFP_ENABLE config BT_HFP_CLIENT_ENABLE bool "Hands Free Unit" config BT_HFP_AG_ENABLE bool "Audio Gateway" endchoice choice BT_HFP_AUDIO_DATA_PATH prompt "audio(SCO) data path" depends on BT_HFP_ENABLE help SCO data path, i.e. HCI or PCM. This option is set using API "esp_bredr_sco_datapath_set" in Bluetooth host. Default SCO data path can also be set in Bluetooth Controller. config BT_HFP_AUDIO_DATA_PATH_PCM bool "PCM" config BT_HFP_AUDIO_DATA_PATH_HCI bool "HCI" endchoice config BT_HFP_WBS_ENABLE bool "Wide Band Speech" depends on BT_HFP_AUDIO_DATA_PATH_HCI default y help This enables Wide Band Speech. Should disable it when SCO data path is PCM. Otherwise there will be no data transmited via GPIOs. config BT_HID_ENABLED bool "Classic BT HID" depends on BT_CLASSIC_ENABLED default n help This enables the BT HID Host choice BT_HID_ROLE prompt "Profile Role configuration" depends on BT_HID_ENABLED config BT_HID_HOST_ENABLED bool "Classic BT HID Host" help This enables the BT HID Host config BT_HID_DEVICE_ENABLED bool "Classic BT HID Device" help This enables the BT HID Device endchoice config BT_SSP_ENABLED bool "Secure Simple Pairing" depends on BT_CLASSIC_ENABLED default y help This enables the Secure Simple Pairing. If disable this option, Bluedroid will only support Legacy Pairing config BT_BLE_ENABLED bool "Bluetooth Low Energy" depends on BT_BLUEDROID_ENABLED default y help This enables Bluetooth Low Energy config BT_GATTS_ENABLE bool "Include GATT server module(GATTS)" depends on BT_BLE_ENABLED default y help This option can be disabled when the app work only on gatt client mode config BT_GATTS_PPCP_CHAR_GAP bool "Enable Peripheral Preferred Connection Parameters characteristic in GAP service" depends on BT_GATTS_ENABLE default n help This enables "Peripheral Preferred Connection Parameters" characteristic (UUID: 0x2A04) in GAP service that has connection parameters like min/max connection interval, slave latency and supervision timeout multiplier config BT_BLE_BLUFI_ENABLE bool "Include blufi function" depends on BT_GATTS_ENABLE default n help This option can be close when the app does not require blufi function. config BT_GATT_MAX_SR_PROFILES int "Max GATT Server Profiles" depends on BT_GATTS_ENABLE && BT_BLUEDROID_ENABLED range 1 32 default 8 help Maximum GATT Server Profiles Count config BT_GATT_MAX_SR_ATTRIBUTES int "Max GATT Service Attributes" depends on BT_GATTS_ENABLE && BT_BLUEDROID_ENABLED range 1 500 default 100 help Maximum GATT Service Attributes Count choice BT_GATTS_SEND_SERVICE_CHANGE_MODE prompt "GATTS Service Change Mode" default BT_GATTS_SEND_SERVICE_CHANGE_AUTO depends on BT_GATTS_ENABLE help Service change indication mode for GATT Server. config BT_GATTS_SEND_SERVICE_CHANGE_MANUAL bool "GATTS manually send service change indication" help Manually send service change indication through API esp_ble_gatts_send_service_change_indication() config BT_GATTS_SEND_SERVICE_CHANGE_AUTO bool "GATTS automatically send service change indication" help Let Bluedroid handle the service change indication internally endchoice config BT_GATTS_SEND_SERVICE_CHANGE_MODE int depends on BT_GATTS_ENABLE default 0 if BT_GATTS_SEND_SERVICE_CHANGE_AUTO default 1 if BT_GATTS_SEND_SERVICE_CHANGE_MANUAL default 0 config BT_GATTC_ENABLE bool "Include GATT client module(GATTC)" depends on BT_BLE_ENABLED default y help This option can be close when the app work only on gatt server mode config BT_GATTC_CACHE_NVS_FLASH bool "Save gattc cache data to nvs flash" depends on BT_GATTC_ENABLE default n help This select can save gattc cache data to nvs flash config BT_GATTC_CONNECT_RETRY_COUNT int "The number of attempts to reconnect if the connection establishment failed" depends on BT_GATTC_ENABLE range 0 7 default 3 help The number of attempts to reconnect if the connection establishment failed config BT_BLE_SMP_ENABLE bool "Include BLE security module(SMP)" depends on BT_BLE_ENABLED default y help This option can be close when the app not used the ble security connect. config BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE bool "Slave enable connection parameters update during pairing" depends on BT_BLE_SMP_ENABLE default n help In order to reduce the pairing time, slave actively initiates connection parameters update during pairing. config BT_STACK_NO_LOG bool "Disable BT debug logs (minimize bin size)" depends on BT_BLUEDROID_ENABLED default n help This select can save the rodata code size menu "BT DEBUG LOG LEVEL" depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG choice BT_LOG_HCI_TRACE_LEVEL prompt "HCI layer" default BT_LOG_HCI_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for HCI layer config BT_LOG_HCI_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_HCI_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_HCI_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_HCI_TRACE_LEVEL_API bool "API" config BT_LOG_HCI_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_HCI_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_HCI_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_HCI_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_HCI_TRACE_LEVEL_NONE default 1 if BT_LOG_HCI_TRACE_LEVEL_ERROR default 2 if BT_LOG_HCI_TRACE_LEVEL_WARNING default 3 if BT_LOG_HCI_TRACE_LEVEL_API default 4 if BT_LOG_HCI_TRACE_LEVEL_EVENT default 5 if BT_LOG_HCI_TRACE_LEVEL_DEBUG default 6 if BT_LOG_HCI_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_BTM_TRACE_LEVEL prompt "BTM layer" default BT_LOG_BTM_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for BTM layer config BT_LOG_BTM_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_BTM_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_BTM_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_BTM_TRACE_LEVEL_API bool "API" config BT_LOG_BTM_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_BTM_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_BTM_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_BTM_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_BTM_TRACE_LEVEL_NONE default 1 if BT_LOG_BTM_TRACE_LEVEL_ERROR default 2 if BT_LOG_BTM_TRACE_LEVEL_WARNING default 3 if BT_LOG_BTM_TRACE_LEVEL_API default 4 if BT_LOG_BTM_TRACE_LEVEL_EVENT default 5 if BT_LOG_BTM_TRACE_LEVEL_DEBUG default 6 if BT_LOG_BTM_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_L2CAP_TRACE_LEVEL prompt "L2CAP layer" default BT_LOG_L2CAP_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for L2CAP layer config BT_LOG_L2CAP_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_L2CAP_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_L2CAP_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_L2CAP_TRACE_LEVEL_API bool "API" config BT_LOG_L2CAP_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_L2CAP_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_L2CAP_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_L2CAP_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_L2CAP_TRACE_LEVEL_NONE default 1 if BT_LOG_L2CAP_TRACE_LEVEL_ERROR default 2 if BT_LOG_L2CAP_TRACE_LEVEL_WARNING default 3 if BT_LOG_L2CAP_TRACE_LEVEL_API default 4 if BT_LOG_L2CAP_TRACE_LEVEL_EVENT default 5 if BT_LOG_L2CAP_TRACE_LEVEL_DEBUG default 6 if BT_LOG_L2CAP_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_RFCOMM_TRACE_LEVEL prompt "RFCOMM layer" default BT_LOG_RFCOMM_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for RFCOMM layer config BT_LOG_RFCOMM_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_RFCOMM_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_RFCOMM_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_RFCOMM_TRACE_LEVEL_API bool "API" config BT_LOG_RFCOMM_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_RFCOMM_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_RFCOMM_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_RFCOMM_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_RFCOMM_TRACE_LEVEL_NONE default 1 if BT_LOG_RFCOMM_TRACE_LEVEL_ERROR default 2 if BT_LOG_RFCOMM_TRACE_LEVEL_WARNING default 3 if BT_LOG_RFCOMM_TRACE_LEVEL_API default 4 if BT_LOG_RFCOMM_TRACE_LEVEL_EVENT default 5 if BT_LOG_RFCOMM_TRACE_LEVEL_DEBUG default 6 if BT_LOG_RFCOMM_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_SDP_TRACE_LEVEL prompt "SDP layer" default BT_LOG_SDP_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for SDP layer config BT_LOG_SDP_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_SDP_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_SDP_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_SDP_TRACE_LEVEL_API bool "API" config BT_LOG_SDP_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_SDP_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_SDP_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_SDP_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_SDP_TRACE_LEVEL_NONE default 1 if BT_LOG_SDP_TRACE_LEVEL_ERROR default 2 if BT_LOG_SDP_TRACE_LEVEL_WARNING default 3 if BT_LOG_SDP_TRACE_LEVEL_API default 4 if BT_LOG_SDP_TRACE_LEVEL_EVENT default 5 if BT_LOG_SDP_TRACE_LEVEL_DEBUG default 6 if BT_LOG_SDP_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_GAP_TRACE_LEVEL prompt "GAP layer" default BT_LOG_GAP_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for GAP layer config BT_LOG_GAP_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_GAP_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_GAP_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_GAP_TRACE_LEVEL_API bool "API" config BT_LOG_GAP_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_GAP_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_GAP_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_GAP_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_GAP_TRACE_LEVEL_NONE default 1 if BT_LOG_GAP_TRACE_LEVEL_ERROR default 2 if BT_LOG_GAP_TRACE_LEVEL_WARNING default 3 if BT_LOG_GAP_TRACE_LEVEL_API default 4 if BT_LOG_GAP_TRACE_LEVEL_EVENT default 5 if BT_LOG_GAP_TRACE_LEVEL_DEBUG default 6 if BT_LOG_GAP_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_BNEP_TRACE_LEVEL prompt "BNEP layer" default BT_LOG_BNEP_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for BNEP layer config BT_LOG_BNEP_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_BNEP_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_BNEP_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_BNEP_TRACE_LEVEL_API bool "API" config BT_LOG_BNEP_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_BNEP_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_BNEP_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_BNEP_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_BNEP_TRACE_LEVEL_NONE default 1 if BT_LOG_BNEP_TRACE_LEVEL_ERROR default 2 if BT_LOG_BNEP_TRACE_LEVEL_WARNING default 3 if BT_LOG_BNEP_TRACE_LEVEL_API default 4 if BT_LOG_BNEP_TRACE_LEVEL_EVENT default 5 if BT_LOG_BNEP_TRACE_LEVEL_DEBUG default 6 if BT_LOG_BNEP_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_PAN_TRACE_LEVEL prompt "PAN layer" default BT_LOG_PAN_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for PAN layer config BT_LOG_PAN_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_PAN_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_PAN_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_PAN_TRACE_LEVEL_API bool "API" config BT_LOG_PAN_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_PAN_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_PAN_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_PAN_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_PAN_TRACE_LEVEL_NONE default 1 if BT_LOG_PAN_TRACE_LEVEL_ERROR default 2 if BT_LOG_PAN_TRACE_LEVEL_WARNING default 3 if BT_LOG_PAN_TRACE_LEVEL_API default 4 if BT_LOG_PAN_TRACE_LEVEL_EVENT default 5 if BT_LOG_PAN_TRACE_LEVEL_DEBUG default 6 if BT_LOG_PAN_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_A2D_TRACE_LEVEL prompt "A2D layer" default BT_LOG_A2D_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for A2D layer config BT_LOG_A2D_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_A2D_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_A2D_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_A2D_TRACE_LEVEL_API bool "API" config BT_LOG_A2D_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_A2D_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_A2D_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_A2D_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_A2D_TRACE_LEVEL_NONE default 1 if BT_LOG_A2D_TRACE_LEVEL_ERROR default 2 if BT_LOG_A2D_TRACE_LEVEL_WARNING default 3 if BT_LOG_A2D_TRACE_LEVEL_API default 4 if BT_LOG_A2D_TRACE_LEVEL_EVENT default 5 if BT_LOG_A2D_TRACE_LEVEL_DEBUG default 6 if BT_LOG_A2D_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_AVDT_TRACE_LEVEL prompt "AVDT layer" default BT_LOG_AVDT_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for AVDT layer config BT_LOG_AVDT_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_AVDT_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_AVDT_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_AVDT_TRACE_LEVEL_API bool "API" config BT_LOG_AVDT_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_AVDT_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_AVDT_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_AVDT_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_AVDT_TRACE_LEVEL_NONE default 1 if BT_LOG_AVDT_TRACE_LEVEL_ERROR default 2 if BT_LOG_AVDT_TRACE_LEVEL_WARNING default 3 if BT_LOG_AVDT_TRACE_LEVEL_API default 4 if BT_LOG_AVDT_TRACE_LEVEL_EVENT default 5 if BT_LOG_AVDT_TRACE_LEVEL_DEBUG default 6 if BT_LOG_AVDT_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_AVCT_TRACE_LEVEL prompt "AVCT layer" default BT_LOG_AVCT_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for AVCT layer config BT_LOG_AVCT_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_AVCT_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_AVCT_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_AVCT_TRACE_LEVEL_API bool "API" config BT_LOG_AVCT_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_AVCT_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_AVCT_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_AVCT_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_AVCT_TRACE_LEVEL_NONE default 1 if BT_LOG_AVCT_TRACE_LEVEL_ERROR default 2 if BT_LOG_AVCT_TRACE_LEVEL_WARNING default 3 if BT_LOG_AVCT_TRACE_LEVEL_API default 4 if BT_LOG_AVCT_TRACE_LEVEL_EVENT default 5 if BT_LOG_AVCT_TRACE_LEVEL_DEBUG default 6 if BT_LOG_AVCT_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_AVRC_TRACE_LEVEL prompt "AVRC layer" default BT_LOG_AVRC_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for AVRC layer config BT_LOG_AVRC_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_AVRC_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_AVRC_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_AVRC_TRACE_LEVEL_API bool "API" config BT_LOG_AVRC_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_AVRC_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_AVRC_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_AVRC_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_AVRC_TRACE_LEVEL_NONE default 1 if BT_LOG_AVRC_TRACE_LEVEL_ERROR default 2 if BT_LOG_AVRC_TRACE_LEVEL_WARNING default 3 if BT_LOG_AVRC_TRACE_LEVEL_API default 4 if BT_LOG_AVRC_TRACE_LEVEL_EVENT default 5 if BT_LOG_AVRC_TRACE_LEVEL_DEBUG default 6 if BT_LOG_AVRC_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_MCA_TRACE_LEVEL prompt "MCA layer" default BT_LOG_MCA_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for MCA layer config BT_LOG_MCA_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_MCA_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_MCA_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_MCA_TRACE_LEVEL_API bool "API" config BT_LOG_MCA_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_MCA_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_MCA_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_MCA_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_MCA_TRACE_LEVEL_NONE default 1 if BT_LOG_MCA_TRACE_LEVEL_ERROR default 2 if BT_LOG_MCA_TRACE_LEVEL_WARNING default 3 if BT_LOG_MCA_TRACE_LEVEL_API default 4 if BT_LOG_MCA_TRACE_LEVEL_EVENT default 5 if BT_LOG_MCA_TRACE_LEVEL_DEBUG default 6 if BT_LOG_MCA_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_HID_TRACE_LEVEL prompt "HID layer" default BT_LOG_HID_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for HID layer config BT_LOG_HID_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_HID_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_HID_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_HID_TRACE_LEVEL_API bool "API" config BT_LOG_HID_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_HID_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_HID_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_HID_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_HID_TRACE_LEVEL_NONE default 1 if BT_LOG_HID_TRACE_LEVEL_ERROR default 2 if BT_LOG_HID_TRACE_LEVEL_WARNING default 3 if BT_LOG_HID_TRACE_LEVEL_API default 4 if BT_LOG_HID_TRACE_LEVEL_EVENT default 5 if BT_LOG_HID_TRACE_LEVEL_DEBUG default 6 if BT_LOG_HID_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_APPL_TRACE_LEVEL prompt "APPL layer" default BT_LOG_APPL_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for APPL layer config BT_LOG_APPL_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_APPL_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_APPL_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_APPL_TRACE_LEVEL_API bool "API" config BT_LOG_APPL_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_APPL_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_APPL_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_APPL_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_APPL_TRACE_LEVEL_NONE default 1 if BT_LOG_APPL_TRACE_LEVEL_ERROR default 2 if BT_LOG_APPL_TRACE_LEVEL_WARNING default 3 if BT_LOG_APPL_TRACE_LEVEL_API default 4 if BT_LOG_APPL_TRACE_LEVEL_EVENT default 5 if BT_LOG_APPL_TRACE_LEVEL_DEBUG default 6 if BT_LOG_APPL_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_GATT_TRACE_LEVEL prompt "GATT layer" default BT_LOG_GATT_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for GATT layer config BT_LOG_GATT_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_GATT_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_GATT_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_GATT_TRACE_LEVEL_API bool "API" config BT_LOG_GATT_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_GATT_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_GATT_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_GATT_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_GATT_TRACE_LEVEL_NONE default 1 if BT_LOG_GATT_TRACE_LEVEL_ERROR default 2 if BT_LOG_GATT_TRACE_LEVEL_WARNING default 3 if BT_LOG_GATT_TRACE_LEVEL_API default 4 if BT_LOG_GATT_TRACE_LEVEL_EVENT default 5 if BT_LOG_GATT_TRACE_LEVEL_DEBUG default 6 if BT_LOG_GATT_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_SMP_TRACE_LEVEL prompt "SMP layer" default BT_LOG_SMP_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for SMP layer config BT_LOG_SMP_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_SMP_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_SMP_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_SMP_TRACE_LEVEL_API bool "API" config BT_LOG_SMP_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_SMP_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_SMP_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_SMP_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_SMP_TRACE_LEVEL_NONE default 1 if BT_LOG_SMP_TRACE_LEVEL_ERROR default 2 if BT_LOG_SMP_TRACE_LEVEL_WARNING default 3 if BT_LOG_SMP_TRACE_LEVEL_API default 4 if BT_LOG_SMP_TRACE_LEVEL_EVENT default 5 if BT_LOG_SMP_TRACE_LEVEL_DEBUG default 6 if BT_LOG_SMP_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_BTIF_TRACE_LEVEL prompt "BTIF layer" default BT_LOG_BTIF_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for BTIF layer config BT_LOG_BTIF_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_BTIF_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_BTIF_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_BTIF_TRACE_LEVEL_API bool "API" config BT_LOG_BTIF_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_BTIF_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_BTIF_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_BTIF_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_BTIF_TRACE_LEVEL_NONE default 1 if BT_LOG_BTIF_TRACE_LEVEL_ERROR default 2 if BT_LOG_BTIF_TRACE_LEVEL_WARNING default 3 if BT_LOG_BTIF_TRACE_LEVEL_API default 4 if BT_LOG_BTIF_TRACE_LEVEL_EVENT default 5 if BT_LOG_BTIF_TRACE_LEVEL_DEBUG default 6 if BT_LOG_BTIF_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_BTC_TRACE_LEVEL prompt "BTC layer" default BT_LOG_BTC_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for BTC layer config BT_LOG_BTC_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_BTC_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_BTC_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_BTC_TRACE_LEVEL_API bool "API" config BT_LOG_BTC_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_BTC_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_BTC_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_BTC_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_BTC_TRACE_LEVEL_NONE default 1 if BT_LOG_BTC_TRACE_LEVEL_ERROR default 2 if BT_LOG_BTC_TRACE_LEVEL_WARNING default 3 if BT_LOG_BTC_TRACE_LEVEL_API default 4 if BT_LOG_BTC_TRACE_LEVEL_EVENT default 5 if BT_LOG_BTC_TRACE_LEVEL_DEBUG default 6 if BT_LOG_BTC_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_OSI_TRACE_LEVEL prompt "OSI layer" default BT_LOG_OSI_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for OSI layer config BT_LOG_OSI_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_OSI_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_OSI_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_OSI_TRACE_LEVEL_API bool "API" config BT_LOG_OSI_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_OSI_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_OSI_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_OSI_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_OSI_TRACE_LEVEL_NONE default 1 if BT_LOG_OSI_TRACE_LEVEL_ERROR default 2 if BT_LOG_OSI_TRACE_LEVEL_WARNING default 3 if BT_LOG_OSI_TRACE_LEVEL_API default 4 if BT_LOG_OSI_TRACE_LEVEL_EVENT default 5 if BT_LOG_OSI_TRACE_LEVEL_DEBUG default 6 if BT_LOG_OSI_TRACE_LEVEL_VERBOSE default 2 choice BT_LOG_BLUFI_TRACE_LEVEL prompt "BLUFI layer" default BT_LOG_BLUFI_TRACE_LEVEL_WARNING depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG help Define BT trace level for BLUFI layer config BT_LOG_BLUFI_TRACE_LEVEL_NONE bool "NONE" config BT_LOG_BLUFI_TRACE_LEVEL_ERROR bool "ERROR" config BT_LOG_BLUFI_TRACE_LEVEL_WARNING bool "WARNING" config BT_LOG_BLUFI_TRACE_LEVEL_API bool "API" config BT_LOG_BLUFI_TRACE_LEVEL_EVENT bool "EVENT" config BT_LOG_BLUFI_TRACE_LEVEL_DEBUG bool "DEBUG" config BT_LOG_BLUFI_TRACE_LEVEL_VERBOSE bool "VERBOSE" endchoice config BT_LOG_BLUFI_TRACE_LEVEL int depends on BT_BLUEDROID_ENABLED default 0 if BT_LOG_BLUFI_TRACE_LEVEL_NONE default 1 if BT_LOG_BLUFI_TRACE_LEVEL_ERROR default 2 if BT_LOG_BLUFI_TRACE_LEVEL_WARNING default 3 if BT_LOG_BLUFI_TRACE_LEVEL_API default 4 if BT_LOG_BLUFI_TRACE_LEVEL_EVENT default 5 if BT_LOG_BLUFI_TRACE_LEVEL_DEBUG default 6 if BT_LOG_BLUFI_TRACE_LEVEL_VERBOSE default 2 endmenu #BT DEBUG LOG LEVEL config BT_ACL_CONNECTIONS int "BT/BLE MAX ACL CONNECTIONS(1~7)" depends on BT_BLUEDROID_ENABLED range 1 7 default 4 help Maximum BT/BLE connection count config BT_MULTI_CONNECTION_ENBALE bool "Enable BLE multi-conections" depends on BT_BLUEDROID_ENABLED default y help Enable this option if there are multiple connections config BT_ALLOCATION_FROM_SPIRAM_FIRST bool "BT/BLE will first malloc the memory from the PSRAM" depends on BT_BLUEDROID_ENABLED default n help This select can save the internal RAM if there have the PSRAM config BT_BLE_DYNAMIC_ENV_MEMORY bool "Use dynamic memory allocation in BT/BLE stack" depends on BT_BLUEDROID_ENABLED default n help This select can make the allocation of memory will become more flexible config BT_BLE_HOST_QUEUE_CONG_CHECK bool "BLE queue congestion check" depends on BT_BLUEDROID_ENABLED default n help When scanning and scan duplicate is not enabled, if there are a lot of adv packets around or application layer handling adv packets is slow, it will cause the controller memory to run out. if enabled, adv packets will be lost when host queue is congested. config BT_SMP_ENABLE bool depends on BT_BLUEDROID_ENABLED default BT_CLASSIC_ENABLED || BT_BLE_SMP_ENABLE config BT_BLE_ACT_SCAN_REP_ADV_SCAN bool "Report adv data and scan response individually when BLE active scan" depends on BT_BLUEDROID_ENABLED && (BTDM_CTRL_MODE_BTDM || BTDM_CTRL_MODE_BLE_ONLY) default n help Originally, when doing BLE active scan, Bluedroid will not report adv to application layer until receive scan response. This option is used to disable the behavior. When enable this option, Bluedroid will report adv data or scan response to application layer immediately. # Memory reserved at start of DRAM for Bluetooth stack config BT_BLE_ESTAB_LINK_CONN_TOUT int "Timeout of BLE connection establishment" depends on BT_BLUEDROID_ENABLED range 1 60 default 30 help Bluetooth Connection establishment maximum time, if connection time exceeds this value, the connection establishment fails, ESP_GATTC_OPEN_EVT or ESP_GATTS_OPEN_EVT is triggered. config BT_MAX_DEVICE_NAME_LEN int "length of bluetooth device name" depends on BT_BLUEDROID_ENABLED range 32 248 default 32 help Bluetooth Device name length shall be no larger than 248 octets, If the broadcast data cannot contain the complete device name, then only the shortname will be displayed, the rest parts that can't fit in will be truncated. config BT_BLE_RPA_SUPPORTED bool "Update RPA to Controller" depends on BT_BLUEDROID_ENABLED default n if IDF_TARGET_ESP32 default y help This enables controller RPA list function. For ESP32, ESP32 only support network privacy mode. If this option is enabled, ESP32 will only accept advertising packets from peer devices that contain private address, HW will not receive the advertising packets contain identity address after IRK changed. If this option is disabled, address resolution will be performed in the host, so the functions that require controller to resolve address in the white list cannot be used. This option is disabled by default on ESP32, please enable or disable this option according to your own needs. For ESP32C3, ESP32S3, ESP32H2 and ESP32C2, devices support network privacy mode and device privacy mode, users can switch the two modes according to their own needs. So this option is enabled by default. config BT_BLE_50_FEATURES_SUPPORTED bool "Enable BLE 5.0 features" depends on (BT_BLUEDROID_ENABLED && (IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3 || SOC_ESP_NIMBLE_CONTROLLER)) default y help This enables BLE 5.0 features, this option only support esp32c3/esp32s3 chip config BT_BLE_42_FEATURES_SUPPORTED bool "Enable BLE 4.2 features" depends on (BT_BLUEDROID_ENABLED && (IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3 || SOC_ESP_NIMBLE_CONTROLLER)) default n help This enables BLE 4.2 features.