/* * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #pragma once #include "esp_log.h" #include "esp_err.h" #include "lwip/inet.h" #include "esp_wifi_types.h" #ifdef __cplusplus extern "C" { #endif #define WIFI_NAN_CONFIG_DEFAULT() { \ .op_channel = 6, \ .master_pref = 2, \ .scan_time = 3, \ .warm_up_sec = 5, \ }; #define NDP_STATUS_ACCEPTED 1 #define NDP_STATUS_REJECTED 2 #define NAN_MAX_PEERS_RECORD 15 #define ESP_NAN_PUBLISH 1 #define ESP_NAN_SUBSCRIBE 2 /** Parameters of a peer service record */ struct nan_peer_record { uint8_t peer_svc_id; /**< Identifier of Peer's service */ uint8_t own_svc_id; /**< Identifier of own service associated with Peer */ uint8_t peer_nmi[6]; /**< Peer's NAN Management Interface address */ uint8_t peer_svc_type; /**< Peer's service type (Publish/Subscribe) */ uint8_t ndp_id; /**< Specifies if the peer has any active datapath */ uint8_t peer_ndi[6]; /**< Peer's NAN Data Interface address, only valid when ndp_id is non-zero */ }; /** * @brief Start NAN Discovery with provided configuration * * @attention This API should be called after esp_wifi_init(). * * @param nan_cfg NAN related parameters to be configured. * * @return * - ESP_OK: succeed * - others: failed */ esp_err_t esp_wifi_nan_start(const wifi_nan_config_t *nan_cfg); /** * @brief Stop NAN Discovery, end NAN Services and Datapaths * * @return * - ESP_OK: succeed * - others: failed */ esp_err_t esp_wifi_nan_stop(void); /** * @brief Start Publishing a service to the NAN Peers in vicinity * * @attention This API should be called after esp_wifi_nan_start(). * * @param publish_cfg Configuration parameters for publishing a service. * @param ndp_resp_needed Setting this true will require user response for every NDP Req using esp_wifi_nan_datapath_resp API. * * @return * - non-zero: Publish service identifier * - zero: failed */ uint8_t esp_wifi_nan_publish_service(const wifi_nan_publish_cfg_t *publish_cfg, bool ndp_resp_needed); /** * @brief Subscribe for a service within the NAN cluster * * @attention This API should be called after esp_wifi_nan_start(). * * @param subscribe_cfg Configuration parameters for subscribing for a service. * * @return * - non-zero: Subscribe service identifier * - zero: failed */ uint8_t esp_wifi_nan_subscribe_service(const wifi_nan_subscribe_cfg_t *subscribe_cfg); /** * @brief Send a follow-up message to the NAN Peer with matched service * * @attention This API should be called after a NAN service is discovered due to a match. * * @param fup_params Configuration parameters for sending a Follow-up message. * * @return * - ESP_OK: succeed * - others: failed */ esp_err_t esp_wifi_nan_send_message(wifi_nan_followup_params_t *fup_params); /** * @brief Cancel a NAN service * * @param service_id Publish/Subscribe service id to be cancelled. * * @return * - ESP_OK: succeed * - others: failed */ esp_err_t esp_wifi_nan_cancel_service(uint8_t service_id); /** * @brief Send NAN Datapath Request to a NAN Publisher with matched service * * @attention This API should be called by the Subscriber after a match occurs with a Publisher. * * @param req NAN Datapath Request parameters. * * @return * - non-zero: NAN Datapath Identifier * - zero: failed */ uint8_t esp_wifi_nan_datapath_req(wifi_nan_datapath_req_t *req); /** * @brief Respond to a NAN Datapath request with Accept or Reject * * @attention This API should be called if ndp_auto_accept is not set True by the Publisher and * a WIFI_EVENT_NDP_INDICATION event is received due to an incoming NDP request. * * @param resp NAN Datapath Response parameters. * * @return * - ESP_OK: succeed * - others: failed */ esp_err_t esp_wifi_nan_datapath_resp(wifi_nan_datapath_resp_t *resp); /** * @brief Terminate a NAN Datapath * * @param req NAN Datapath end request parameters. * * @return * - ESP_OK: succeed * - others: failed */ esp_err_t esp_wifi_nan_datapath_end(wifi_nan_datapath_end_req_t *req); /** * @brief Get IPv6 Link Local address using MAC address * * @param[out] ip6 Derived IPv6 Link Local address. * @param[in] mac_addr Input MAC Address. */ void esp_wifi_nan_get_ipv6_linklocal_from_mac(ip6_addr_t *ip6, uint8_t *mac_addr); /** * brief Get own Service information from Service ID OR Name. * * @param[inout] own_svc_id As input, it indicates Service ID to search for. * As output, it indicates Service ID of the service found using Service Name. * @param[inout] svc_name As input, it indicates Service Name to search for. * As output, it indicates Service Name of the service found using Service ID. * @param[out] num_peer_records Number of peers discovered by corresponding service. * @return * - ESP_OK: succeed * - ESP_FAIL: failed */ esp_err_t esp_wifi_nan_get_own_svc_info(uint8_t *own_svc_id, char *svc_name, int *num_peer_records); /** * brief Get a list of Peers discovered by the given Service. * * @param[inout] num_peer_records As input param, it stores max peers peer_record can hold. * As output param, it specifies the actual number of peers this API returns. * @param own_svc_id Service ID of own service. * @param[out] peer_record Pointer to first peer record. * @return * - ESP_OK: succeed * - ESP_FAIL: failed */ esp_err_t esp_wifi_nan_get_peer_records(int *num_peer_records, uint8_t own_svc_id, struct nan_peer_record *peer_record); /** * brief Find Peer's Service information using Peer MAC and optionally Service Name. * * @param svc_name Service Name of the published/subscribed service. * @param peer_mac Peer's NAN Management Interface MAC address. * @param[out] peer_info Peer's service information structure. * @return * - ESP_OK: succeed * - ESP_FAIL: failed */ esp_err_t esp_wifi_nan_get_peer_info(char *svc_name, uint8_t *peer_mac, struct nan_peer_record *peer_info); #ifdef __cplusplus } #endif