/* * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. */ #include "esp_log.h" #include "nvs_flash.h" /* BLE */ #include "esp_nimble_hci.h" #include "nimble/nimble_port.h" #include "nimble/nimble_port_freertos.h" #include "host/ble_hs.h" #include "host/util/util.h" #include "console/console.h" #include "services/gap/ble_svc_gap.h" #include "blecent.h" static const char *tag = "NimBLE_BLE_CENT"; static int blecent_gap_event(struct ble_gap_event *event, void *arg); static uint8_t peer_addr[6]; void ble_store_config_init(void); /** * Application callback. Called when the attempt to subscribe to notifications * for the ANS Unread Alert Status characteristic has completed. */ static int blecent_on_subscribe(uint16_t conn_handle, const struct ble_gatt_error *error, struct ble_gatt_attr *attr, void *arg) { MODLOG_DFLT(INFO, "Subscribe complete; status=%d conn_handle=%d " "attr_handle=%d\n", error->status, conn_handle, attr->handle); return 0; } /** * Application callback. Called when the write to the ANS Alert Notification * Control Point characteristic has completed. */ static int blecent_on_write(uint16_t conn_handle, const struct ble_gatt_error *error, struct ble_gatt_attr *attr, void *arg) { MODLOG_DFLT(INFO, "Write complete; status=%d conn_handle=%d attr_handle=%d\n", error->status, conn_handle, attr->handle); /* Subscribe to notifications for the Unread Alert Status characteristic. * A central enables notifications by writing two bytes (1, 0) to the * characteristic's client-characteristic-configuration-descriptor (CCCD). */ const struct peer_dsc *dsc; uint8_t value[2]; int rc; const struct peer *peer = peer_find(conn_handle); dsc = peer_dsc_find_uuid(peer, BLE_UUID16_DECLARE(BLECENT_SVC_ALERT_UUID), BLE_UUID16_DECLARE(BLECENT_CHR_UNR_ALERT_STAT_UUID), BLE_UUID16_DECLARE(BLE_GATT_DSC_CLT_CFG_UUID16)); if (dsc == NULL) { MODLOG_DFLT(ERROR, "Error: Peer lacks a CCCD for the Unread Alert " "Status characteristic\n"); goto err; } value[0] = 1; value[1] = 0; rc = ble_gattc_write_flat(conn_handle, dsc->dsc.handle, value, sizeof value, blecent_on_subscribe, NULL); if (rc != 0) { MODLOG_DFLT(ERROR, "Error: Failed to subscribe to characteristic; " "rc=%d\n", rc); goto err; } return 0; err: /* Terminate the connection. */ return ble_gap_terminate(peer->conn_handle, BLE_ERR_REM_USER_CONN_TERM); } /** * Application callback. Called when the read of the ANS Supported New Alert * Category characteristic has completed. */ static int blecent_on_read(uint16_t conn_handle, const struct ble_gatt_error *error, struct ble_gatt_attr *attr, void *arg) { MODLOG_DFLT(INFO, "Read complete; status=%d conn_handle=%d", error->status, conn_handle); if (error->status == 0) { MODLOG_DFLT(INFO, " attr_handle=%d value=", attr->handle); print_mbuf(attr->om); } MODLOG_DFLT(INFO, "\n"); /* Write two bytes (99, 100) to the alert-notification-control-point * characteristic. */ const struct peer_chr *chr; uint8_t value[2]; int rc; const struct peer *peer = peer_find(conn_handle); chr = peer_chr_find_uuid(peer, BLE_UUID16_DECLARE(BLECENT_SVC_ALERT_UUID), BLE_UUID16_DECLARE(BLECENT_CHR_ALERT_NOT_CTRL_PT)); if (chr == NULL) { MODLOG_DFLT(ERROR, "Error: Peer doesn't support the Alert " "Notification Control Point characteristic\n"); goto err; } value[0] = 99; value[1] = 100; rc = ble_gattc_write_flat(conn_handle, chr->chr.val_handle, value, sizeof value, blecent_on_write, NULL); if (rc != 0) { MODLOG_DFLT(ERROR, "Error: Failed to write characteristic; rc=%d\n", rc); goto err; } return 0; err: /* Terminate the connection. */ return ble_gap_terminate(peer->conn_handle, BLE_ERR_REM_USER_CONN_TERM); } /** * Performs three GATT operations against the specified peer: * 1. Reads the ANS Supported New Alert Category characteristic. * 2. After read is completed, writes the ANS Alert Notification Control Point characteristic. * 3. After write is completed, subscribes to notifications for the ANS Unread Alert Status * characteristic. * * If the peer does not support a required service, characteristic, or * descriptor, then the peer lied when it claimed support for the alert * notification service! When this happens, or if a GATT procedure fails, * this function immediately terminates the connection. */ static void blecent_read_write_subscribe(const struct peer *peer) { const struct peer_chr *chr; int rc; /* Read the supported-new-alert-category characteristic. */ chr = peer_chr_find_uuid(peer, BLE_UUID16_DECLARE(BLECENT_SVC_ALERT_UUID), BLE_UUID16_DECLARE(BLECENT_CHR_SUP_NEW_ALERT_CAT_UUID)); if (chr == NULL) { MODLOG_DFLT(ERROR, "Error: Peer doesn't support the Supported New " "Alert Category characteristic\n"); goto err; } rc = ble_gattc_read(peer->conn_handle, chr->chr.val_handle, blecent_on_read, NULL); if (rc != 0) { MODLOG_DFLT(ERROR, "Error: Failed to read characteristic; rc=%d\n", rc); goto err; } return; err: /* Terminate the connection. */ ble_gap_terminate(peer->conn_handle, BLE_ERR_REM_USER_CONN_TERM); } /** * Called when service discovery of the specified peer has completed. */ static void blecent_on_disc_complete(const struct peer *peer, int status, void *arg) { if (status != 0) { /* Service discovery failed. Terminate the connection. */ MODLOG_DFLT(ERROR, "Error: Service discovery failed; status=%d " "conn_handle=%d\n", status, peer->conn_handle); ble_gap_terminate(peer->conn_handle, BLE_ERR_REM_USER_CONN_TERM); return; } /* Service discovery has completed successfully. Now we have a complete * list of services, characteristics, and descriptors that the peer * supports. */ MODLOG_DFLT(ERROR, "Service discovery complete; status=%d " "conn_handle=%d\n", status, peer->conn_handle); /* Now perform three GATT procedures against the peer: read, * write, and subscribe to notifications. */ blecent_read_write_subscribe(peer); } /** * Initiates the GAP general discovery procedure. */ static void blecent_scan(void) { uint8_t own_addr_type; struct ble_gap_disc_params disc_params; int rc; /* Figure out address to use while advertising (no privacy for now) */ rc = ble_hs_id_infer_auto(0, &own_addr_type); if (rc != 0) { MODLOG_DFLT(ERROR, "error determining address type; rc=%d\n", rc); return; } /* Tell the controller to filter duplicates; we don't want to process * repeated advertisements from the same device. */ disc_params.filter_duplicates = 1; /** * Perform a passive scan. I.e., don't send follow-up scan requests to * each advertiser. */ disc_params.passive = 1; /* Use defaults for the rest of the parameters. */ disc_params.itvl = 0; disc_params.window = 0; disc_params.filter_policy = 0; disc_params.limited = 0; rc = ble_gap_disc(own_addr_type, BLE_HS_FOREVER, &disc_params, blecent_gap_event, NULL); if (rc != 0) { MODLOG_DFLT(ERROR, "Error initiating GAP discovery procedure; rc=%d\n", rc); } } /** * Indicates whether we should try to connect to the sender of the specified * advertisement. The function returns a positive result if the device * advertises connectability and support for the Alert Notification service. */ static int blecent_should_connect(const struct ble_gap_disc_desc *disc) { struct ble_hs_adv_fields fields; int rc; int i; /* The device has to be advertising connectability. */ if (disc->event_type != BLE_HCI_ADV_RPT_EVTYPE_ADV_IND && disc->event_type != BLE_HCI_ADV_RPT_EVTYPE_DIR_IND) { return 0; } rc = ble_hs_adv_parse_fields(&fields, disc->data, disc->length_data); if (rc != 0) { return rc; } if (strlen(CONFIG_EXAMPLE_PEER_ADDR) && (strncmp(CONFIG_EXAMPLE_PEER_ADDR, "ADDR_ANY", strlen("ADDR_ANY")) != 0)) { ESP_LOGI(tag, "Peer address from menuconfig: %s", CONFIG_EXAMPLE_PEER_ADDR); /* Convert string to address */ sscanf(CONFIG_EXAMPLE_PEER_ADDR, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &peer_addr[5], &peer_addr[4], &peer_addr[3], &peer_addr[2], &peer_addr[1], &peer_addr[0]); if (memcmp(peer_addr, disc->addr.val, sizeof(disc->addr.val)) != 0) { return 0; } } /* The device has to advertise support for the Alert Notification * service (0x1811). */ for (i = 0; i < fields.num_uuids16; i++) { if (ble_uuid_u16(&fields.uuids16[i].u) == BLECENT_SVC_ALERT_UUID) { return 1; } } return 0; } /** * Connects to the sender of the specified advertisement of it looks * interesting. A device is "interesting" if it advertises connectability and * support for the Alert Notification service. */ static void blecent_connect_if_interesting(const struct ble_gap_disc_desc *disc) { uint8_t own_addr_type; int rc; /* Don't do anything if we don't care about this advertiser. */ if (!blecent_should_connect(disc)) { return; } /* Scanning must be stopped before a connection can be initiated. */ rc = ble_gap_disc_cancel(); if (rc != 0) { MODLOG_DFLT(DEBUG, "Failed to cancel scan; rc=%d\n", rc); return; } /* Figure out address to use for connect (no privacy for now) */ rc = ble_hs_id_infer_auto(0, &own_addr_type); if (rc != 0) { MODLOG_DFLT(ERROR, "error determining address type; rc=%d\n", rc); return; } /* Try to connect the the advertiser. Allow 30 seconds (30000 ms) for * timeout. */ rc = ble_gap_connect(own_addr_type, &disc->addr, 30000, NULL, blecent_gap_event, NULL); if (rc != 0) { MODLOG_DFLT(ERROR, "Error: Failed to connect to device; addr_type=%d " "addr=%s; rc=%d\n", disc->addr.type, addr_str(disc->addr.val), rc); return; } } /** * The nimble host executes this callback when a GAP event occurs. The * application associates a GAP event callback with each connection that is * established. blecent uses the same callback for all connections. * * @param event The event being signalled. * @param arg Application-specified argument; unused by * blecent. * * @return 0 if the application successfully handled the * event; nonzero on failure. The semantics * of the return code is specific to the * particular GAP event being signalled. */ static int blecent_gap_event(struct ble_gap_event *event, void *arg) { struct ble_gap_conn_desc desc; struct ble_hs_adv_fields fields; int rc; switch (event->type) { case BLE_GAP_EVENT_DISC: rc = ble_hs_adv_parse_fields(&fields, event->disc.data, event->disc.length_data); if (rc != 0) { return 0; } /* An advertisment report was received during GAP discovery. */ print_adv_fields(&fields); /* Try to connect to the advertiser if it looks interesting. */ blecent_connect_if_interesting(&event->disc); return 0; case BLE_GAP_EVENT_CONNECT: /* A new connection was established or a connection attempt failed. */ if (event->connect.status == 0) { /* Connection successfully established. */ MODLOG_DFLT(INFO, "Connection established "); rc = ble_gap_conn_find(event->connect.conn_handle, &desc); assert(rc == 0); print_conn_desc(&desc); MODLOG_DFLT(INFO, "\n"); /* Remember peer. */ rc = peer_add(event->connect.conn_handle); if (rc != 0) { MODLOG_DFLT(ERROR, "Failed to add peer; rc=%d\n", rc); return 0; } /* Perform service discovery. */ rc = peer_disc_all(event->connect.conn_handle, blecent_on_disc_complete, NULL); if (rc != 0) { MODLOG_DFLT(ERROR, "Failed to discover services; rc=%d\n", rc); return 0; } } else { /* Connection attempt failed; resume scanning. */ MODLOG_DFLT(ERROR, "Error: Connection failed; status=%d\n", event->connect.status); blecent_scan(); } return 0; case BLE_GAP_EVENT_DISCONNECT: /* Connection terminated. */ MODLOG_DFLT(INFO, "disconnect; reason=%d ", event->disconnect.reason); print_conn_desc(&event->disconnect.conn); MODLOG_DFLT(INFO, "\n"); /* Forget about peer. */ peer_delete(event->disconnect.conn.conn_handle); /* Resume scanning. */ blecent_scan(); return 0; case BLE_GAP_EVENT_DISC_COMPLETE: MODLOG_DFLT(INFO, "discovery complete; reason=%d\n", event->disc_complete.reason); return 0; case BLE_GAP_EVENT_ENC_CHANGE: /* Encryption has been enabled or disabled for this connection. */ MODLOG_DFLT(INFO, "encryption change event; status=%d ", event->enc_change.status); rc = ble_gap_conn_find(event->enc_change.conn_handle, &desc); assert(rc == 0); print_conn_desc(&desc); return 0; case BLE_GAP_EVENT_NOTIFY_RX: /* Peer sent us a notification or indication. */ MODLOG_DFLT(INFO, "received %s; conn_handle=%d attr_handle=%d " "attr_len=%d\n", event->notify_rx.indication ? "indication" : "notification", event->notify_rx.conn_handle, event->notify_rx.attr_handle, OS_MBUF_PKTLEN(event->notify_rx.om)); /* Attribute data is contained in event->notify_rx.om. Use * `os_mbuf_copydata` to copy the data received in notification mbuf */ return 0; case BLE_GAP_EVENT_MTU: MODLOG_DFLT(INFO, "mtu update event; conn_handle=%d cid=%d mtu=%d\n", event->mtu.conn_handle, event->mtu.channel_id, event->mtu.value); return 0; case BLE_GAP_EVENT_REPEAT_PAIRING: /* We already have a bond with the peer, but it is attempting to * establish a new secure link. This app sacrifices security for * convenience: just throw away the old bond and accept the new link. */ /* Delete the old bond. */ rc = ble_gap_conn_find(event->repeat_pairing.conn_handle, &desc); assert(rc == 0); ble_store_util_delete_peer(&desc.peer_id_addr); /* Return BLE_GAP_REPEAT_PAIRING_RETRY to indicate that the host should * continue with the pairing operation. */ return BLE_GAP_REPEAT_PAIRING_RETRY; default: return 0; } } static void blecent_on_reset(int reason) { MODLOG_DFLT(ERROR, "Resetting state; reason=%d\n", reason); } static void blecent_on_sync(void) { int rc; /* Make sure we have proper identity address set (public preferred) */ rc = ble_hs_util_ensure_addr(0); assert(rc == 0); #if !CONFIG_EXAMPLE_INIT_DEINIT_LOOP /* Begin scanning for a peripheral to connect to. */ blecent_scan(); #endif } void blecent_host_task(void *param) { ESP_LOGI(tag, "BLE Host Task Started"); /* This function will return only when nimble_port_stop() is executed */ nimble_port_run(); nimble_port_freertos_deinit(); } #if CONFIG_EXAMPLE_INIT_DEINIT_LOOP /* This function showcases stack init and deinit procedure. */ static void stack_init_deinit(void) { int rc; while(1) { vTaskDelay(1000); ESP_LOGI(tag, "Deinit host"); rc = nimble_port_stop(); if (rc == 0) { nimble_port_deinit(); ESP_ERROR_CHECK(esp_nimble_hci_and_controller_deinit()); } vTaskDelay(1000); ESP_LOGI(tag, "Init host"); ESP_ERROR_CHECK(esp_nimble_hci_and_controller_init()); nimble_port_init(); nimble_port_freertos_init(blecent_host_task); ESP_LOGI(tag, "Waiting for 1 second"); } } #endif void app_main(void) { int rc; /* Initialize NVS — it is used to store PHY calibration data */ esp_err_t ret = nvs_flash_init(); if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) { ESP_ERROR_CHECK(nvs_flash_erase()); ret = nvs_flash_init(); } ESP_ERROR_CHECK(ret); ESP_ERROR_CHECK(esp_nimble_hci_and_controller_init()); nimble_port_init(); /* Configure the host. */ ble_hs_cfg.reset_cb = blecent_on_reset; ble_hs_cfg.sync_cb = blecent_on_sync; ble_hs_cfg.store_status_cb = ble_store_util_status_rr; /* Initialize data structures to track connected peers. */ rc = peer_init(MYNEWT_VAL(BLE_MAX_CONNECTIONS), 64, 64, 64); assert(rc == 0); /* Set the default device name. */ rc = ble_svc_gap_device_name_set("nimble-blecent"); assert(rc == 0); /* XXX Need to have template for store */ ble_store_config_init(); nimble_port_freertos_init(blecent_host_task); #if CONFIG_EXAMPLE_INIT_DEINIT_LOOP stack_init_deinit(); #endif }