| Supported Targets | ESP32 | | ----------------- | ----- | # BLE Peripheral Example (See the README.md file in the upper level 'examples' directory for more information about examples.) This example creates GATT server and then starts advertising, waiting to be connected to a GATT client. It uses ESP32's Bluetooth controller and NimBLE stack based BLE host. This example aims at understanding GATT database configuration, handling GATT reads and writes, handling subscribe events, understanding advertisement and SMP related NimBLE APIs. It also demonstrates security features of NimBLE stack. SMP parameters like I/O capabilities of device, Bonding flag, MITM protection flag and Secure Connection only mode, Enabling Link Encryption etc., can be configured through menuconfig options. For RPA feature (currently Host based privacy feature is supported), use API `ble_hs_pvcy_rpa_config` to enable/disable host based privacy, `own_addr_type` needs to be set to `BLE_ADDR_RANDOM` to use this feature. Please include `ble_hs_pvcy.h` while using this API. As `ble_hs_pvcy_rpa_config` configures host privacy and sets address in controller, it is necessary to call this API after host-controller are synced (e.g. in `bleprph_on_sync` callback). To test this demo, any BLE scanner app can be used. A Python based utility `bleprph_test.py` is also provided (which will run as a BLE GATT Client) and can be used to test this example. Note : * Make sure to run `python -m pip install --user -r $IDF_PATH/requirements.txt -r $IDF_PATH/tools/ble/requirements.txt` to install the dependency packages needed. * Currently this Python utility is only supported on Linux (BLE communication is via BLuez + DBus). ## How to Use Example Before project configuration and build, be sure to set the correct chip target using: ```bash idf.py set-target ``` ### Configure the project Open the project configuration menu: ```bash idf.py menuconfig ``` In the `Example Configuration` menu: * Select I/O capabilities of device from `Example Configuration --> I/O Capability`, default is `Just_works`. * Enable/Disable other security related parameters `Bonding, MITM option, secure connection(SM SC)`. ### Build and Flash Run `idf.py -p PORT flash monitor` to build, flash and monitor the project. (To exit the serial monitor, type ``Ctrl-]``.) See the [Getting Started Guide](https://idf.espressif.com/) for full steps to configure and use ESP-IDF to build projects. ## Example Output There is this console output when bleprph is connected and characteristic is read: ``` I (118) BTDM_INIT: BT controller compile version [fe7ced0] I (118) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE W (128) phy_init: failed to load RF calibration data (0xffffffff), falling back to full calibration I (268) phy: phy_version: 4100, 6fa5e27, Jan 25 2019, 17:02:06, 0, 2 I (508) NimBLE_BLE_PRPH: BLE Host Task Started I (508) uart: queue free spaces: 8 GAP procedure initiated: stop advertising. Device Address: xx:xx:xx:xx:xx:xx GAP procedure initiated: advertise; disc_mode=2 adv_channel_map=0 own_addr_type=0 adv_filter_policy=0 adv_itvl_min=0 adv_itvl_max=0 connection established; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=39 conn_latency=0 supervision_timeout=500 encrypted=0 authenticated=0 bonded=0 connection updated; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=6 conn_latency=0 supervision_timeout=500 encrypted=0 authenticated=0 bonded=0 I (50888) NimBLE_BLE_PRPH: PASSKEY_ACTION_EVENT started I (50888) NimBLE_BLE_PRPH: Passkey on device's display: xxxxxx I (50888) NimBLE_BLE_PRPH: Accept or reject the passkey through console in this format -> key Y or key N key Y I (50898) NimBLE_BLE_PRPH: ble_sm_inject_io result: 0 encryption change event; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=6 conn_latency=0 supervision_timeout=500 encrypted=1 authenticated=1 bonded=1 connection updated; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=39 conn_latency=0 supervision_timeout=500 encrypted=1 authenticated=1 bonded=1 subscribe event; conn_handle=1 attr_handle=19 reason=1 prevn=0 curn=1 previ=0 curi=0 Subscribe to attribute (19) successful subscribe event; conn_handle=1 attr_handle=25 reason=1 prevn=0 curn=1 previ=0 curi=0 Subscribe to attribute (25) successful GATT procedure initiated: notify; att_handle=25 Notification sent succesfully ``` ## Running Python Utility ```bash python bleprph_test.py ``` ## Python Utility Output This is this output seen on the python side on successful connection: ``` discovering adapter... bluetooth adapter discovered powering on adapter... bluetooth adapter powered on Started Discovery Connecting to device... Connected to device Services [dbus.String(u'00001801-0000-1000-8000-00805f9b34fb', variant_level=1), dbus.String(u'59462f12-9543-9999-12c8-58b459a2712d', variant_level=1)] Characteristics retrieved Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service000a/char000b Characteristic UUID: 5c3a659e-897e-45e1-b016-007107c96df6 Value: dbus.Array([dbus.Byte(45), dbus.Byte(244), dbus.Byte(81), dbus.Byte(88)], signature=dbus.Signature('y')) Properties: : dbus.Array([dbus.String(u'read')], signature=dbus.Signature('s'), variant_level=1) Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service000a/char000d Characteristic UUID: 5c3a659e-897e-45e1-b016-007107c96df7 Value: dbus.Array([dbus.Byte(0)], signature=dbus.Signature('y')) Properties: : dbus.Array([dbus.String(u'read'), dbus.String(u'write')], signature=dbus.Signature('s'), variant_level=1) Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service0006/char0007 Characteristic UUID: 00002a05-0000-1000-8000-00805f9b34fb Value: None Properties: : dbus.Array([dbus.String(u'indicate')], signature=dbus.Signature('s'), variant_level=1) Characteristics after write operation Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service000a/char000b Characteristic UUID: 5c3a659e-897e-45e1-b016-007107c96df6 Value: dbus.Array([dbus.Byte(45), dbus.Byte(244), dbus.Byte(81), dbus.Byte(88)], signature=dbus.Signature('y')) Properties: : dbus.Array([dbus.String(u'read')], signature=dbus.Signature('s'), variant_level=1) Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service000a/char000d Characteristic UUID: 5c3a659e-897e-45e1-b016-007107c96df7 Value: dbus.Array([dbus.Byte(65)], signature=dbus.Signature('y')) Properties: : dbus.Array([dbus.String(u'read'), dbus.String(u'write')], signature=dbus.Signature('s'), variant_level=1) Characteristic: /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/service0006/char0007 Characteristic UUID: 00002a05-0000-1000-8000-00805f9b34fb Value: None Properties: : dbus.Array([dbus.String(u'indicate')], signature=dbus.Signature('s'), variant_level=1) exiting from test... disconnecting device... device disconnected powering off adapter... bluetooth adapter powered off ``` ## Note * NVS support is not yet integrated to bonding. So, for now, bonding is not persistent across reboot. ## Troubleshooting For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.