/* * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #include #include #include #include "esp_log.h" #include "esp_intr_alloc.h" #include "soc/soc_caps.h" #include "soc/soc_pins.h" #include "soc/gpio_periph.h" #include "esp_rom_gpio.h" #include "esp_rom_sys.h" #include "driver/gpio.h" #include "driver/sdmmc_host.h" #include "esp_private/periph_ctrl.h" #include "sdmmc_private.h" #include "freertos/FreeRTOS.h" #include "freertos/semphr.h" #include "soc/sdmmc_periph.h" #include "hal/gpio_hal.h" #define SDMMC_EVENT_QUEUE_LENGTH 32 static void sdmmc_isr(void* arg); static void sdmmc_host_dma_init(void); static const char* TAG = "sdmmc_periph"; static intr_handle_t s_intr_handle; static QueueHandle_t s_event_queue; static SemaphoreHandle_t s_io_intr_event; static size_t s_slot_width[2] = {1, 1}; /* The following definitions are used to simplify GPIO configuration in the driver, * whether IOMUX or GPIO Matrix is used by the chip. * Two simple "APIs" are provided to the driver code: * - configure_pin(name, slot, mode): Configures signal "name" for the given slot and mode. * - GPIO_NUM(slot, name): Returns the GPIO number of signal "name" for the given slot. * * To make this work, configure_pin is defined as a macro that picks the parameters required * for configuring GPIO matrix or IOMUX from relevant arrays, and passes them to either of * configure_pin_gpio_matrix, configure_pin_iomux functions. * Likewise, GPIO_NUM is a macro that picks the pin number from one of the two structures. * * Macros are used rather than inline functions to look up members of different structures * with same names. E.g. the number of pin d3 is obtained either from .d3 member of * sdmmc_slot_gpio_num array (for IOMUX) or from .d3 member of s_sdmmc_slot_gpio_num array * (for GPIO matrix). */ #ifdef SOC_SDMMC_USE_GPIO_MATRIX static void configure_pin_gpio_matrix(uint8_t gpio_num, uint8_t gpio_matrix_sig, gpio_mode_t mode, const char* name); #define configure_pin(name, slot, mode) \ configure_pin_gpio_matrix(s_sdmmc_slot_gpio_num[slot].name, sdmmc_slot_gpio_sig[slot].name, mode, #name) static sdmmc_slot_io_info_t s_sdmmc_slot_gpio_num[SOC_SDMMC_NUM_SLOTS]; #define GPIO_NUM(slot, name) s_sdmmc_slot_gpio_num[slot].name #elif SOC_SDMMC_USE_IOMUX static void configure_pin_iomux(uint8_t gpio_num); #define configure_pin(name, slot, mode) configure_pin_iomux(sdmmc_slot_gpio_num[slot].name) #define GPIO_NUM(slot, name) sdmmc_slot_gpio_num[slot].name #endif // SOC_SDMMC_USE_GPIO_MATRIX static esp_err_t sdmmc_host_pullup_en_internal(int slot, int width); void sdmmc_host_reset(void) { // Set reset bits SDMMC.ctrl.controller_reset = 1; SDMMC.ctrl.dma_reset = 1; SDMMC.ctrl.fifo_reset = 1; // Wait for the reset bits to be cleared by hardware while (SDMMC.ctrl.controller_reset || SDMMC.ctrl.fifo_reset || SDMMC.ctrl.dma_reset) { ; } } /* We have two clock divider stages: * - one is the clock generator which drives SDMMC peripheral, * it can be configured using SDMMC.clock register. It can generate * frequencies 160MHz/(N + 1), where 0 < N < 16, I.e. from 10 to 80 MHz. * - 4 clock dividers inside SDMMC peripheral, which can divide clock * from the first stage by 2 * M, where 0 < M < 255 * (they can also be bypassed). * * For cards which aren't UHS-1 or UHS-2 cards, which we don't support, * maximum bus frequency in high speed (HS) mode is 50 MHz. * Note: for non-UHS-1 cards, HS mode is optional. * Default speed (DS) mode is mandatory, it works up to 25 MHz. * Whether the card supports HS or not can be determined using TRAN_SPEED * field of card's CSD register. * * 50 MHz can not be obtained exactly, closest we can get is 53 MHz. * * The first stage divider is set to the highest possible value for the given * frequency, and the the second stage dividers are used if division factor * is >16. * * Of the second stage dividers, div0 is used for card 0, and div1 is used * for card 1. */ static void sdmmc_host_set_clk_div(int div) { /** * Set frequency to 160MHz / div * * n: counter resets at div_factor_n. * l: negedge when counter equals div_factor_l. * h: posedge when counter equals div_factor_h. * * We set the duty cycle to 1/2 */ #if CONFIG_IDF_TARGET_ESP32 assert (div > 1 && div <= 16); int h = div - 1; int l = div / 2 - 1; SDMMC.clock.div_factor_h = h; SDMMC.clock.div_factor_l = l; SDMMC.clock.div_factor_n = h; // Set phases for in/out clocks // 180 degree phase on input and output clocks SDMMC.clock.phase_dout = 4; SDMMC.clock.phase_din = 4; SDMMC.clock.phase_core = 0; #elif CONFIG_IDF_TARGET_ESP32S3 assert (div > 1 && div <= 16); int l = div - 1; int h = div / 2 - 1; SDMMC.clock.div_factor_h = h; SDMMC.clock.div_factor_l = l; SDMMC.clock.div_factor_n = l; // Make sure 160 MHz source clock is used #if SOC_SDMMC_SUPPORT_XTAL_CLOCK SDMMC.clock.clk_sel = 1; #endif SDMMC.clock.phase_core = 0; /* 90 deg. delay for cclk_out to satisfy large hold time for SDR12 (up to 25MHz) and SDR25 (up to 50MHz) modes. * Whether this delayed clock will be used depends on use_hold_reg bit in CMD structure, * determined when sending out the command. */ SDMMC.clock.phase_dout = 1; SDMMC.clock.phase_din = 0; #endif //CONFIG_IDF_TARGET_ESP32S3 // Wait for the clock to propagate esp_rom_delay_us(10); } static void sdmmc_host_input_clk_disable(void) { SDMMC.clock.val = 0; } static void sdmmc_host_clock_update_command(int slot) { // Clock update command (not a real command; just updates CIU registers) sdmmc_hw_cmd_t cmd_val = { .card_num = slot, .update_clk_reg = 1, .wait_complete = 1 }; bool repeat = true; while(repeat) { sdmmc_host_start_command(slot, cmd_val, 0); while (true) { // Sending clock update command to the CIU can generate HLE error. // According to the manual, this is okay and we must retry the command. if (SDMMC.rintsts.hle) { SDMMC.rintsts.hle = 1; repeat = true; break; } // When the command is accepted by CIU, start_command bit will be // cleared in SDMMC.cmd register. if (SDMMC.cmd.start_command == 0) { repeat = false; break; } } } } esp_err_t sdmmc_host_set_card_clk(int slot, uint32_t freq_khz) { if (!(slot == 0 || slot == 1)) { return ESP_ERR_INVALID_ARG; } const int clk40m = 40000; // Disable clock first SDMMC.clkena.cclk_enable &= ~BIT(slot); sdmmc_host_clock_update_command(slot); int host_div = 0; /* clock divider of the host (SDMMC.clock) */ int card_div = 0; /* 1/2 of card clock divider (SDMMC.clkdiv) */ // Calculate new dividers if (freq_khz >= SDMMC_FREQ_HIGHSPEED) { host_div = 4; // 160 MHz / 4 = 40 MHz card_div = 0; } else if (freq_khz == SDMMC_FREQ_DEFAULT) { host_div = 8; // 160 MHz / 8 = 20 MHz card_div = 0; } else if (freq_khz == SDMMC_FREQ_PROBING) { host_div = 10; // 160 MHz / 10 / (20 * 2) = 400 kHz card_div = 20; } else { host_div = 2; card_div = (clk40m + freq_khz * 2 - 1) / (freq_khz * 2); // round up } ESP_LOGD(TAG, "slot=%d host_div=%d card_div=%d freq=%dkHz", slot, host_div, card_div, 2 * APB_CLK_FREQ / host_div / ((card_div == 0) ? 1 : card_div * 2) / 1000); // Program CLKDIV and CLKSRC, send them to the CIU switch(slot) { case 0: SDMMC.clksrc.card0 = 0; SDMMC.clkdiv.div0 = card_div; break; case 1: SDMMC.clksrc.card1 = 1; SDMMC.clkdiv.div1 = card_div; break; } sdmmc_host_set_clk_div(host_div); sdmmc_host_clock_update_command(slot); // Re-enable clocks SDMMC.clkena.cclk_enable |= BIT(slot); SDMMC.clkena.cclk_low_power |= BIT(slot); sdmmc_host_clock_update_command(slot); // set data timeout const uint32_t data_timeout_ms = 100; uint32_t data_timeout_cycles = data_timeout_ms * freq_khz; const uint32_t data_timeout_cycles_max = 0xffffff; if (data_timeout_cycles > data_timeout_cycles_max) { data_timeout_cycles = data_timeout_cycles_max; } SDMMC.tmout.data = data_timeout_cycles; // always set response timeout to highest value, it's small enough anyway SDMMC.tmout.response = 255; return ESP_OK; } esp_err_t sdmmc_host_start_command(int slot, sdmmc_hw_cmd_t cmd, uint32_t arg) { if (!(slot == 0 || slot == 1)) { return ESP_ERR_INVALID_ARG; } if ((SDMMC.cdetect.cards & BIT(slot)) != 0) { return ESP_ERR_NOT_FOUND; } if (cmd.data_expected && cmd.rw && (SDMMC.wrtprt.cards & BIT(slot)) != 0) { return ESP_ERR_INVALID_STATE; } /* Outputs should be synchronized to cclk_out */ cmd.use_hold_reg = 1; while (SDMMC.cmd.start_command == 1) { ; } SDMMC.cmdarg = arg; cmd.card_num = slot; cmd.start_command = 1; SDMMC.cmd = cmd; return ESP_OK; } esp_err_t sdmmc_host_init(void) { if (s_intr_handle) { return ESP_ERR_INVALID_STATE; } periph_module_reset(PERIPH_SDMMC_MODULE); periph_module_enable(PERIPH_SDMMC_MODULE); // Enable clock to peripheral. Use smallest divider first. sdmmc_host_set_clk_div(2); // Reset sdmmc_host_reset(); ESP_LOGD(TAG, "peripheral version %"PRIx32", hardware config %08"PRIx32, SDMMC.verid, SDMMC.hcon); // Clear interrupt status and set interrupt mask to known state SDMMC.rintsts.val = 0xffffffff; SDMMC.intmask.val = 0; SDMMC.ctrl.int_enable = 0; // Allocate event queue s_event_queue = xQueueCreate(SDMMC_EVENT_QUEUE_LENGTH, sizeof(sdmmc_event_t)); if (!s_event_queue) { return ESP_ERR_NO_MEM; } s_io_intr_event = xSemaphoreCreateBinary(); if (!s_io_intr_event) { vQueueDelete(s_event_queue); s_event_queue = NULL; return ESP_ERR_NO_MEM; } // Attach interrupt handler esp_err_t ret = esp_intr_alloc(ETS_SDIO_HOST_INTR_SOURCE, 0, &sdmmc_isr, s_event_queue, &s_intr_handle); if (ret != ESP_OK) { vQueueDelete(s_event_queue); s_event_queue = NULL; vSemaphoreDelete(s_io_intr_event); s_io_intr_event = NULL; return ret; } // Enable interrupts SDMMC.intmask.val = SDMMC_INTMASK_CD | SDMMC_INTMASK_CMD_DONE | SDMMC_INTMASK_DATA_OVER | SDMMC_INTMASK_RCRC | SDMMC_INTMASK_DCRC | SDMMC_INTMASK_RTO | SDMMC_INTMASK_DTO | SDMMC_INTMASK_HTO | SDMMC_INTMASK_SBE | SDMMC_INTMASK_EBE | SDMMC_INTMASK_RESP_ERR | SDMMC_INTMASK_HLE; //sdio is enabled only when use. SDMMC.ctrl.int_enable = 1; // Disable generation of Busy Clear Interrupt SDMMC.cardthrctl.busy_clr_int_en = 0; // Enable DMA sdmmc_host_dma_init(); // Initialize transaction handler ret = sdmmc_host_transaction_handler_init(); if (ret != ESP_OK) { vQueueDelete(s_event_queue); s_event_queue = NULL; vSemaphoreDelete(s_io_intr_event); s_io_intr_event = NULL; esp_intr_free(s_intr_handle); s_intr_handle = NULL; return ret; } return ESP_OK; } #ifdef SOC_SDMMC_USE_IOMUX static void configure_pin_iomux(uint8_t gpio_num) { const int sdmmc_func = 3; const int drive_strength = 3; assert(gpio_num != (uint8_t) GPIO_NUM_NC); gpio_pulldown_dis(gpio_num); uint32_t reg = GPIO_PIN_MUX_REG[gpio_num]; assert(reg != UINT32_MAX); PIN_INPUT_ENABLE(reg); gpio_hal_iomux_func_sel(reg, sdmmc_func); PIN_SET_DRV(reg, drive_strength); } #elif SOC_SDMMC_USE_GPIO_MATRIX static void configure_pin_gpio_matrix(uint8_t gpio_num, uint8_t gpio_matrix_sig, gpio_mode_t mode, const char* name) { assert (gpio_num != (uint8_t) GPIO_NUM_NC); ESP_LOGD(TAG, "using GPIO%d as %s pin", gpio_num, name); gpio_reset_pin(gpio_num); gpio_set_direction(gpio_num, mode); gpio_pulldown_dis(gpio_num); if (mode == GPIO_MODE_INPUT || mode == GPIO_MODE_INPUT_OUTPUT) { esp_rom_gpio_connect_in_signal(gpio_num, gpio_matrix_sig, false); } if (mode == GPIO_MODE_OUTPUT || mode == GPIO_MODE_INPUT_OUTPUT) { esp_rom_gpio_connect_out_signal(gpio_num, gpio_matrix_sig, false, false); } } #endif // SOC_SDMMC_USE_{IOMUX,GPIO_MATRIX} esp_err_t sdmmc_host_init_slot(int slot, const sdmmc_slot_config_t* slot_config) { if (!s_intr_handle) { return ESP_ERR_INVALID_STATE; } if (!(slot == 0 || slot == 1)) { return ESP_ERR_INVALID_ARG; } if (slot_config == NULL) { return ESP_ERR_INVALID_ARG; } int gpio_cd = slot_config->cd; int gpio_wp = slot_config->wp; uint8_t slot_width = slot_config->width; // Configure pins const sdmmc_slot_info_t* slot_info = &sdmmc_slot_info[slot]; if (slot_width == SDMMC_SLOT_WIDTH_DEFAULT) { slot_width = slot_info->width; } else if (slot_width > slot_info->width) { return ESP_ERR_INVALID_ARG; } s_slot_width[slot] = slot_width; #if SOC_SDMMC_USE_GPIO_MATRIX /* Save pin configuration for this slot */ s_sdmmc_slot_gpio_num[slot].clk = slot_config->clk; s_sdmmc_slot_gpio_num[slot].cmd = slot_config->cmd; s_sdmmc_slot_gpio_num[slot].d0 = slot_config->d0; /* Save d1 even in 1-line mode, it might be needed for SDIO INT line */ s_sdmmc_slot_gpio_num[slot].d1 = slot_config->d1; if (slot_width >= 4) { s_sdmmc_slot_gpio_num[slot].d2 = slot_config->d2; } /* Save d3 even for 1-line mode, as it needs to be set high */ s_sdmmc_slot_gpio_num[slot].d3 = slot_config->d3; if (slot_width >= 8) { s_sdmmc_slot_gpio_num[slot].d4 = slot_config->d4; s_sdmmc_slot_gpio_num[slot].d5 = slot_config->d5; s_sdmmc_slot_gpio_num[slot].d6 = slot_config->d6; s_sdmmc_slot_gpio_num[slot].d7 = slot_config->d7; } #endif bool pullup = slot_config->flags & SDMMC_SLOT_FLAG_INTERNAL_PULLUP; if (pullup) { sdmmc_host_pullup_en_internal(slot, slot_config->width); } configure_pin(clk, slot, GPIO_MODE_OUTPUT); configure_pin(cmd, slot, GPIO_MODE_INPUT_OUTPUT); configure_pin(d0, slot, GPIO_MODE_INPUT_OUTPUT); if (slot_width >= 4) { configure_pin(d1, slot, GPIO_MODE_INPUT_OUTPUT); configure_pin(d2, slot, GPIO_MODE_INPUT_OUTPUT); // Force D3 high to make slave enter SD mode. // Connect to peripheral after width configuration. gpio_config_t gpio_conf = { .pin_bit_mask = BIT64(GPIO_NUM(slot, d3)), .mode = GPIO_MODE_OUTPUT, .pull_up_en = 0, .pull_down_en = 0, .intr_type = GPIO_INTR_DISABLE, }; gpio_config(&gpio_conf); gpio_set_level(GPIO_NUM(slot, d3), 1); } if (slot_width == 8) { configure_pin(d4, slot, GPIO_MODE_INPUT_OUTPUT); configure_pin(d5, slot, GPIO_MODE_INPUT_OUTPUT); configure_pin(d6, slot, GPIO_MODE_INPUT_OUTPUT); configure_pin(d7, slot, GPIO_MODE_INPUT_OUTPUT); } // SDIO slave interrupt is edge sensitive to ~(int_n | card_int | card_detect) // set this and card_detect to high to enable sdio interrupt esp_rom_gpio_connect_in_signal(GPIO_MATRIX_CONST_ONE_INPUT, slot_info->card_int, false); // Set up Card Detect input int matrix_in_cd; if (gpio_cd != SDMMC_SLOT_NO_CD) { ESP_LOGD(TAG, "using GPIO%d as CD pin", gpio_cd); esp_rom_gpio_pad_select_gpio(gpio_cd); gpio_set_direction(gpio_cd, GPIO_MODE_INPUT); matrix_in_cd = gpio_cd; } else { // if not set, default to CD low (card present) matrix_in_cd = GPIO_MATRIX_CONST_ZERO_INPUT; } esp_rom_gpio_connect_in_signal(matrix_in_cd, slot_info->card_detect, false); // Set up Write Protect input int matrix_in_wp; if (gpio_wp != SDMMC_SLOT_NO_WP) { ESP_LOGD(TAG, "using GPIO%d as WP pin", gpio_wp); esp_rom_gpio_pad_select_gpio(gpio_wp); gpio_set_direction(gpio_wp, GPIO_MODE_INPUT); matrix_in_wp = gpio_wp; } else { // if not set, default to WP high (not write protected) matrix_in_wp = GPIO_MATRIX_CONST_ONE_INPUT; } // WP signal is normally active low, but hardware expects // an active-high signal, so invert it in GPIO matrix esp_rom_gpio_connect_in_signal(matrix_in_wp, slot_info->write_protect, true); // By default, set probing frequency (400kHz) and 1-bit bus esp_err_t ret = sdmmc_host_set_card_clk(slot, 400); if (ret != ESP_OK) { return ret; } ret = sdmmc_host_set_bus_width(slot, 1); if (ret != ESP_OK) { return ret; } return ESP_OK; } esp_err_t sdmmc_host_deinit(void) { if (!s_intr_handle) { return ESP_ERR_INVALID_STATE; } esp_intr_free(s_intr_handle); s_intr_handle = NULL; vQueueDelete(s_event_queue); s_event_queue = NULL; vQueueDelete(s_io_intr_event); s_io_intr_event = NULL; sdmmc_host_input_clk_disable(); sdmmc_host_transaction_handler_deinit(); periph_module_disable(PERIPH_SDMMC_MODULE); return ESP_OK; } esp_err_t sdmmc_host_wait_for_event(int tick_count, sdmmc_event_t* out_event) { if (!out_event) { return ESP_ERR_INVALID_ARG; } if (!s_event_queue) { return ESP_ERR_INVALID_STATE; } int ret = xQueueReceive(s_event_queue, out_event, tick_count); if (ret == pdFALSE) { return ESP_ERR_TIMEOUT; } return ESP_OK; } esp_err_t sdmmc_host_set_bus_width(int slot, size_t width) { if (!(slot == 0 || slot == 1)) { return ESP_ERR_INVALID_ARG; } if (sdmmc_slot_info[slot].width < width) { return ESP_ERR_INVALID_ARG; } const uint16_t mask = BIT(slot); if (width == 1) { SDMMC.ctype.card_width_8 &= ~mask; SDMMC.ctype.card_width &= ~mask; } else if (width == 4) { SDMMC.ctype.card_width_8 &= ~mask; SDMMC.ctype.card_width |= mask; // D3 was set to GPIO high to force slave into SD mode, until 4-bit mode is set configure_pin(d3, slot, GPIO_MODE_INPUT_OUTPUT); } else if (width == 8) { SDMMC.ctype.card_width_8 |= mask; // D3 was set to GPIO high to force slave into SD mode, until 4-bit mode is set configure_pin(d3, slot, GPIO_MODE_INPUT_OUTPUT); } else { return ESP_ERR_INVALID_ARG; } ESP_LOGD(TAG, "slot=%d width=%d", slot, width); return ESP_OK; } size_t sdmmc_host_get_slot_width(int slot) { assert( slot == 0 || slot == 1 ); return s_slot_width[slot]; } esp_err_t sdmmc_host_set_bus_ddr_mode(int slot, bool ddr_enabled) { if (!(slot == 0 || slot == 1)) { return ESP_ERR_INVALID_ARG; } if (s_slot_width[slot] == 8 && ddr_enabled) { ESP_LOGW(TAG, "DDR mode with 8-bit bus width is not supported yet"); // requires reconfiguring controller clock for 2x card frequency return ESP_ERR_NOT_SUPPORTED; } uint32_t mask = BIT(slot); if (ddr_enabled) { SDMMC.uhs.ddr |= mask; SDMMC.emmc_ddr_reg |= mask; } else { SDMMC.uhs.ddr &= ~mask; SDMMC.emmc_ddr_reg &= ~mask; } ESP_LOGD(TAG, "slot=%d ddr=%d", slot, ddr_enabled ? 1 : 0); return ESP_OK; } esp_err_t sdmmc_host_set_cclk_always_on(int slot, bool cclk_always_on) { if (!(slot == 0 || slot == 1)) { return ESP_ERR_INVALID_ARG; } if (cclk_always_on) { SDMMC.clkena.cclk_low_power &= ~BIT(slot); } else { SDMMC.clkena.cclk_low_power |= BIT(slot); } sdmmc_host_clock_update_command(slot); return ESP_OK; } static void sdmmc_host_dma_init(void) { SDMMC.ctrl.dma_enable = 1; SDMMC.bmod.val = 0; SDMMC.bmod.sw_reset = 1; SDMMC.idinten.ni = 1; SDMMC.idinten.ri = 1; SDMMC.idinten.ti = 1; } void sdmmc_host_dma_stop(void) { SDMMC.ctrl.use_internal_dma = 0; SDMMC.ctrl.dma_reset = 1; SDMMC.bmod.fb = 0; SDMMC.bmod.enable = 0; } void sdmmc_host_dma_prepare(sdmmc_desc_t* desc, size_t block_size, size_t data_size) { // Set size of data and DMA descriptor pointer SDMMC.bytcnt = data_size; SDMMC.blksiz = block_size; SDMMC.dbaddr = desc; // Enable everything needed to use DMA SDMMC.ctrl.dma_enable = 1; SDMMC.ctrl.use_internal_dma = 1; SDMMC.bmod.enable = 1; SDMMC.bmod.fb = 1; sdmmc_host_dma_resume(); } void sdmmc_host_dma_resume(void) { SDMMC.pldmnd = 1; } bool sdmmc_host_card_busy(void) { return SDMMC.status.data_busy == 1; } esp_err_t sdmmc_host_io_int_enable(int slot) { configure_pin(d1, slot, GPIO_MODE_INPUT_OUTPUT); return ESP_OK; } esp_err_t sdmmc_host_io_int_wait(int slot, TickType_t timeout_ticks) { /* SDIO interrupts are negedge sensitive ones: the status bit is only set * when first interrupt triggered. * * If D1 GPIO is low when entering this function, we know that interrupt * (in SDIO sense) has occurred and we don't need to use SDMMC peripheral * interrupt. */ SDMMC.intmask.sdio &= ~BIT(slot); /* Disable SDIO interrupt */ SDMMC.rintsts.sdio = BIT(slot); if (gpio_get_level(GPIO_NUM(slot, d1)) == 0) { return ESP_OK; } /* Otherwise, need to wait for an interrupt. Since D1 was high, * SDMMC peripheral interrupt is guaranteed to trigger on negedge. */ xSemaphoreTake(s_io_intr_event, 0); SDMMC.intmask.sdio |= BIT(slot); /* Re-enable SDIO interrupt */ if (xSemaphoreTake(s_io_intr_event, timeout_ticks) == pdTRUE) { return ESP_OK; } else { return ESP_ERR_TIMEOUT; } } /** * @brief SDMMC interrupt handler * * All communication in SD protocol is driven by the master, and the hardware * handles things like stop commands automatically. * So the interrupt handler doesn't need to do much, we just push interrupt * status into a queue, clear interrupt flags, and let the task currently * doing communication figure out what to do next. * This also applies to SDIO interrupts which are generated by the slave. * * Card detect interrupts pose a small issue though, because if a card is * plugged in and out a few times, while there is no task to process * the events, event queue can become full and some card detect events * may be dropped. We ignore this problem for now, since the there are no other * interesting events which can get lost due to this. */ static void sdmmc_isr(void* arg) { QueueHandle_t queue = (QueueHandle_t) arg; sdmmc_event_t event; int higher_priority_task_awoken = pdFALSE; uint32_t pending = SDMMC.mintsts.val & 0xFFFF; SDMMC.rintsts.val = pending; event.sdmmc_status = pending; uint32_t dma_pending = SDMMC.idsts.val; SDMMC.idsts.val = dma_pending; event.dma_status = dma_pending & 0x1f; if (pending != 0 || dma_pending != 0) { xQueueSendFromISR(queue, &event, &higher_priority_task_awoken); } uint32_t sdio_pending = SDMMC.mintsts.sdio; if (sdio_pending) { // disable the interrupt (no need to clear here, this is done in sdmmc_host_io_wait_int) SDMMC.intmask.sdio &= ~sdio_pending; xSemaphoreGiveFromISR(s_io_intr_event, &higher_priority_task_awoken); } if (higher_priority_task_awoken == pdTRUE) { portYIELD_FROM_ISR(); } } static esp_err_t sdmmc_host_pullup_en_internal(int slot, int width) { if (width > sdmmc_slot_info[slot].width) { //in esp32 we only support 8 bit in slot 0, note this is occupied by the flash by default return ESP_ERR_INVALID_ARG; } // according to the spec, the host controls the clk, we don't to pull it up here gpio_pullup_en(GPIO_NUM(slot, cmd)); gpio_pullup_en(GPIO_NUM(slot, d0)); if (width >= 4) { gpio_pullup_en(GPIO_NUM(slot, d1)); gpio_pullup_en(GPIO_NUM(slot, d2)); gpio_pullup_en(GPIO_NUM(slot, d3)); } if (width == 8) { gpio_pullup_en(GPIO_NUM(slot, d4)); gpio_pullup_en(GPIO_NUM(slot, d5)); gpio_pullup_en(GPIO_NUM(slot, d6)); gpio_pullup_en(GPIO_NUM(slot, d7)); } return ESP_OK; }