/* * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #pragma once #include #include #include "freertos/FreeRTOS.h" #include "freertos/task.h" #include "hcd.h" #include "usb/usb_types_ch9.h" #include "usb/usb_types_stack.h" #ifdef __cplusplus extern "C" { #endif // ------------------------------------------------------ Types -------------------------------------------------------- // ----------------------- Handles ------------------------- /** * @brief Handle of a allocated endpoint */ typedef struct usbh_ep_handle_s *usbh_ep_handle_t; // ----------------------- Events -------------------------- typedef enum { USBH_EVENT_DEV_NEW, /**< A new device has been enumerated and added to the device pool */ USBH_EVENT_DEV_GONE, /**< A device is gone. Clients should close the device */ USBH_EVENT_DEV_ALL_FREE, /**< All devices have been freed */ } usbh_event_t; /** * @brief Endpoint events * * @note Optimization: Keep this identical to hcd_pipe_event_t */ typedef enum { USBH_EP_EVENT_NONE, /**< The EP has no events (used to indicate no events when polling) */ USBH_EP_EVENT_URB_DONE, /**< The EP has completed a URB. The URB can be dequeued */ USBH_EP_EVENT_ERROR_XFER, /**< The EP encountered excessive errors when transferring a URB i.e., three three consecutive transaction errors (e.g., no ACK, bad CRC etc) */ USBH_EP_EVENT_ERROR_URB_NOT_AVAIL, /**< The EP tried to execute a transfer but no URB was available */ USBH_EP_EVENT_ERROR_OVERFLOW, /**< The EP received more data than requested. Usually a Packet babble error (i.e., an IN packet has exceeded the EP's MPS) */ USBH_EP_EVENT_ERROR_STALL, /**< EP received a STALL response */ } usbh_ep_event_t; /** * @brief Hub driver events for the USBH * * These events as passed by the Hub driver to the USBH via usbh_hub_pass_event() * * USBH_HUB_EVENT_PORT_ERROR: * - The port has encountered an error (such as a sudden disconnection). The device connected to that port is no longer valid. * - The USBH should: * - Trigger a USBH_EVENT_DEV_GONE * - Prevent further transfers to the device * - Trigger the device's cleanup if it is already closed * - When the last client closes the device via usbh_dev_close(), free the device object and issue a USBH_HUB_REQ_PORT_RECOVER request * * USBH_HUB_EVENT_PORT_DISABLED: * - A previous USBH_HUB_REQ_PORT_DISABLE has completed. * - The USBH should free the device object */ typedef enum { USBH_HUB_EVENT_PORT_ERROR, /**< The port has encountered an error (such as a sudden disconnection). The device connected to that port should be marked gone. */ USBH_HUB_EVENT_PORT_DISABLED, /**< Previous USBH_HUB_REQ_PORT_DISABLE request completed */ } usbh_hub_event_t; // ------------------ Requests/Commands -------------------- /** * @brief Hub driver requests * * Various requests of the Hub driver that the USBH can make. */ typedef enum { USBH_HUB_REQ_PORT_DISABLE, /**< Request that the Hub driver disable a particular port (occurs after a device has been freed). Hub driver should respond with a USBH_HUB_EVENT_PORT_DISABLED */ USBH_HUB_REQ_PORT_RECOVER, /**< Request that the Hub driver recovers a particular port (occurs after a gone device has been freed). */ } usbh_hub_req_t; /** * @brief Endpoint commands * * @note Optimization: Keep this identical to hcd_pipe_cmd_t */ typedef enum { USBH_EP_CMD_HALT, /**< Halt an active endpoint. Any currently executing URB will be canceled. Enqueued URBs are left untouched */ USBH_EP_CMD_FLUSH, /**< Can only be called when halted. Will cause all enqueued URBs to be canceled */ USBH_EP_CMD_CLEAR, /**< Causes a halted endpoint to become active again. Any enqueued URBs will being executing.*/ } usbh_ep_cmd_t; // ---------------------- Callbacks ------------------------ /** * @brief Callback used to indicate completion of control transfers submitted usbh_dev_submit_ctrl_urb() * @note This callback is called from within usbh_process() */ typedef void (*usbh_ctrl_xfer_cb_t)(usb_device_handle_t dev_hdl, urb_t *urb, void *arg); /** * @brief Callback used to indicate that the USBH has an event * * @note This callback is called from within usbh_process() * @note On a USBH_EVENT_DEV_ALL_FREE event, the dev_hdl argument is set to NULL */ typedef void (*usbh_event_cb_t)(usb_device_handle_t dev_hdl, usbh_event_t usbh_event, void *arg); /** * @brief Callback used by the USBH to request actions from the Hub driver * * The Hub Request Callback allows the USBH to request the Hub actions on a particular port. Conversely, the Hub driver * will indicate completion of some of these requests to the USBH via the usbh_hub_event() funtion. */ typedef void (*usbh_hub_req_cb_t)(hcd_port_handle_t port_hdl, usbh_hub_req_t hub_req, void *arg); /** * @brief Callback used to indicate an event on an endpoint * * Return whether to yield or not if called from an ISR. Always return false if not called from an ISR */ typedef bool (*usbh_ep_cb_t)(usbh_ep_handle_t ep_hdl, usbh_ep_event_t ep_event, void *arg, bool in_isr); // ----------------------- Objects ------------------------- /** * @brief Configuration for an endpoint being allocated using usbh_ep_alloc() */ typedef struct { uint8_t bInterfaceNumber; /**< Interface number */ uint8_t bAlternateSetting; /**< Alternate setting number of the interface */ uint8_t bEndpointAddress; /**< Endpoint address */ usbh_ep_cb_t ep_cb; /**< Endpoint event callback */ void *ep_cb_arg; /**< Endpoint callback argument */ void *context; /**< Endpoint context */ } usbh_ep_config_t; /** * @brief USBH configuration used in usbh_install() */ typedef struct { usb_proc_req_cb_t proc_req_cb; /**< Processing request callback */ void *proc_req_cb_arg; /**< Processing request callback argument */ usbh_ctrl_xfer_cb_t ctrl_xfer_cb; /**< Control transfer callback */ void *ctrl_xfer_cb_arg; /**< Control transfer callback argument */ usbh_event_cb_t event_cb; /**< USBH event callback */ void *event_cb_arg; /**< USBH event callback argument */ } usbh_config_t; // ------------------------------------------------- USBH Functions ---------------------------------------------------- /** * @brief Installs the USBH driver * * - This function will internally install the HCD * - This must be called before calling any Hub driver functions * * @note Before calling this function, the Host Controller must already be un-clock gated and reset. The USB PHY * (internal or external, and associated GPIOs) must already be configured. * @param usbh_config USBH driver configuration * @return esp_err_t */ esp_err_t usbh_install(const usbh_config_t *usbh_config); /** * @brief Uninstall the USBH driver * * - This function will uninstall the HCD * - The Hub driver must be uninstalled before calling this function * * @note This function will simply free the resources used by the USBH. The underlying Host Controller and USB PHY will * not be disabled. * @return esp_err_t */ esp_err_t usbh_uninstall(void); /** * @brief USBH processing function * * - USBH processing function that must be called repeatedly to process USBH events * - If blocking, the caller can block until the proc_req_cb() is called with USB_PROC_REQ_SOURCE_USBH as the request * source. The USB_PROC_REQ_SOURCE_USBH source indicates that this function should be called. * * @note This function can block * @return esp_err_t */ esp_err_t usbh_process(void); /** * @brief Get the current number of devices * * @note This function can block * @param[out] num_devs_ret Current number of devices * @return esp_err_t */ esp_err_t usbh_num_devs(int *num_devs_ret); // ------------------------------------------------ Device Functions --------------------------------------------------- // --------------------- Device Pool ----------------------- /** * @brief Fill list with address of currently connected devices * * - This function fills the provided list with the address of current connected devices * - Device address can then be used in usbh_dev_open() * - If there are more devices than the list_len, this function will only fill * up to list_len number of devices. * * @param[in] list_len Length of empty list * @param[inout] dev_addr_list Empty list to be filled * @param[out] num_dev_ret Number of devices filled into list * @return esp_err_t */ esp_err_t usbh_dev_addr_list_fill(int list_len, uint8_t *dev_addr_list, int *num_dev_ret); /** * @brief Open a device by address * * A device must be opened before it can be used * * @param[in] dev_addr Device address * @param[out] dev_hdl Device handle * @return esp_err_t */ esp_err_t usbh_dev_open(uint8_t dev_addr, usb_device_handle_t *dev_hdl); /** * @brief CLose a device * * Device can be opened by calling usbh_dev_open() * * @param[in] dev_hdl Device handle * @return esp_err_t */ esp_err_t usbh_dev_close(usb_device_handle_t dev_hdl); /** * @brief Mark that all devices should be freed at the next possible opportunity * * A device marked as free will not be freed until the last client using the device has called usbh_dev_close() * * @return * - ESP_OK: There were no devices to free to begin with. Current state is all free * - ESP_ERR_NOT_FINISHED: One or more devices still need to be freed (but have been marked "to be freed") */ esp_err_t usbh_dev_mark_all_free(void); // ------------------- Single Device ---------------------- /** * @brief Get a device's address * * @note Can be called without opening the device * * @param[in] dev_hdl Device handle * @param[out] dev_addr Device's address * @return esp_err_t */ esp_err_t usbh_dev_get_addr(usb_device_handle_t dev_hdl, uint8_t *dev_addr); /** * @brief Get a device's information * * @note This function can block * @param[in] dev_hdl Device handle * @param[out] dev_info Device information * @return esp_err_t */ esp_err_t usbh_dev_get_info(usb_device_handle_t dev_hdl, usb_device_info_t *dev_info); /** * @brief Get a device's device descriptor * * - The device descriptor is cached when the device is created by the Hub driver * * @param[in] dev_hdl Device handle * @param[out] dev_desc_ret Device descriptor * @return esp_err_t */ esp_err_t usbh_dev_get_desc(usb_device_handle_t dev_hdl, const usb_device_desc_t **dev_desc_ret); /** * @brief Get a device's active configuration descriptor * * Simply returns a reference to the internally cached configuration descriptor * * @note This function can block * @param[in] dev_hdl Device handle * @param config_desc_ret * @return esp_err_t */ esp_err_t usbh_dev_get_config_desc(usb_device_handle_t dev_hdl, const usb_config_desc_t **config_desc_ret); /** * @brief Submit a control transfer (URB) to a device * * @param[in] dev_hdl Device handle * @param[in] urb URB * @return esp_err_t */ esp_err_t usbh_dev_submit_ctrl_urb(usb_device_handle_t dev_hdl, urb_t *urb); // ----------------------------------------------- Endpoint Functions ------------------------------------------------- /** * @brief Allocate an endpoint on a device * * This function allows clients to allocate a non-default endpoint (i.e., not EP0) on a connected device * * - A client must have opened the device using usbh_dev_open() before attempting to allocate an endpoint on the device * - A client should call this function to allocate all endpoints in an interface that the client has claimed. * - A client must allocate an endpoint using this function before attempting to communicate with it * - Once the client allocates an endpoint, the client is now owns/manages the endpoint. No other client should use or * deallocate the endpoint. * * @note This function can block * @note Default endpoints (EP0) are owned by the USBH. For control transfers, use usbh_dev_submit_ctrl_urb() instead * * @param[in] dev_hdl Device handle * @param[in] ep_config Endpoint configuration * @param[out] ep_hdl_ret Endpoint handle * @return esp_err_t */ esp_err_t usbh_ep_alloc(usb_device_handle_t dev_hdl, usbh_ep_config_t *ep_config, usbh_ep_handle_t *ep_hdl_ret); /** * @brief Free and endpoint on a device * * This function frees an endpoint previously allocated by the client using usbh_ep_alloc() * * - Only the client that allocated the endpoint should free it * - The client must have halted and flushed the endpoint using usbh_ep_command() before attempting to free it * - The client must ensure that there are no more function calls to the endpoint before freeing it * * @note This function can block * @param[in] ep_hdl Endpoint handle * @return esp_err_t */ esp_err_t usbh_ep_free(usbh_ep_handle_t ep_hdl); /** * @brief Get the handle of an endpoint using its address * * The endpoint must have been previously allocated using usbh_ep_alloc() * * @param[in] dev_hdl Device handle * @param[in] bEndpointAddress Endpoint address * @param[out] ep_hdl_ret Endpoint handle * @return esp_err_t */ esp_err_t usbh_ep_get_handle(usb_device_handle_t dev_hdl, uint8_t bEndpointAddress, usbh_ep_handle_t *ep_hdl_ret); /** * @brief Enqueue a URB to an endpoint * * The URB will remain enqueued until it completes (successfully or errors out). Use usbh_ep_dequeue_urb() to dequeue * a completed URB. * * @param[in] ep_hdl Endpoint handle * @param[in] urb URB to enqueue * @return esp_err_t */ esp_err_t usbh_ep_enqueue_urb(usbh_ep_handle_t ep_hdl, urb_t *urb); /** * @brief Dequeue a URB from an endpoint * * Dequeue a completed URB from an endpoint. The USBH_EP_EVENT_URB_DONE indicates that URBs can be dequeued * * @param[in] ep_hdl Endpoint handle * @param[out] urb_ret Dequeued URB, or NULL if no more URBs to dequeue * @return esp_err_t */ esp_err_t usbh_ep_dequeue_urb(usbh_ep_handle_t ep_hdl, urb_t **urb_ret); /** * @brief Execute a command on a particular endpoint * * Endpoint commands allows executing a certain action on an endpoint (e.g., halting, flushing, clearing etc) * * @param[in] ep_hdl Endpoint handle * @param[in] command Endpoint command * @return esp_err_t */ esp_err_t usbh_ep_command(usbh_ep_handle_t ep_hdl, usbh_ep_cmd_t command); /** * @brief Get the context of an endpoint * * Get the context variable assigned to and endpoint on allocation. * * @note This function can block * @param[in] ep_hdl Endpoint handle * @return Endpoint context */ void *usbh_ep_get_context(usbh_ep_handle_t ep_hdl); // -------------------------------------------------- Hub Functions ---------------------------------------------------- // ------------------- Device Related ---------------------- /** * @brief Indicates to USBH that the Hub driver is installed * * - The Hub driver must call this function in its installation to indicate the the USBH that it has been installed. * - This should only be called after the USBH has already be installed * * @note Hub Driver only * @param[in] hub_req_callback Hub request callback * @param[in] callback_arg Callback argument * @return esp_err_t */ esp_err_t usbh_hub_is_installed(usbh_hub_req_cb_t hub_req_callback, void *callback_arg); /** * @brief Indicates to USBH the start of enumeration for a device * * - The Hub driver calls this function before it starts enumerating a new device. * - The USBH will allocate a new device that will be initialized by the Hub driver using the remaining hub enumeration * functions. * - The new device's default pipe handle is returned to all the Hub driver to be used during enumeration. * * @note Hub Driver only * @param[in] port_hdl Handle of the port that the device is connected to * @param[in] dev_speed Device's speed * @param[out] new_dev_hdl Device's handle * @param[out] default_pipe_hdl Device's default pipe handle * @return esp_err_t */ esp_err_t usbh_hub_add_dev(hcd_port_handle_t port_hdl, usb_speed_t dev_speed, usb_device_handle_t *new_dev_hdl, hcd_pipe_handle_t *default_pipe_hdl); /** * @brief Indicates to the USBH that a hub event has occurred for a particular device * * @param dev_hdl Device handle * @param hub_event Hub event * @return esp_err_t */ esp_err_t usbh_hub_pass_event(usb_device_handle_t dev_hdl, usbh_hub_event_t hub_event); // ----------------- Enumeration Related ------------------- /** * @brief Assign the enumerating device's address * * @note Hub Driver only * @note Must call in sequence * @param[in] dev_hdl Device handle * @param dev_addr * @return esp_err_t */ esp_err_t usbh_hub_enum_fill_dev_addr(usb_device_handle_t dev_hdl, uint8_t dev_addr); /** * @brief Fill the enumerating device's descriptor * * @note Hub Driver only * @note Must call in sequence * @param[in] dev_hdl Device handle * @param device_desc * @return esp_err_t */ esp_err_t usbh_hub_enum_fill_dev_desc(usb_device_handle_t dev_hdl, const usb_device_desc_t *device_desc); /** * @brief Fill the enumerating device's active configuration descriptor * * @note Hub Driver only * @note Must call in sequence * @note This function can block * @param[in] dev_hdl Device handle * @param config_desc_full * @return esp_err_t */ esp_err_t usbh_hub_enum_fill_config_desc(usb_device_handle_t dev_hdl, const usb_config_desc_t *config_desc_full); /** * @brief Fill one of the string descriptors of the enumerating device * * @note Hub Driver only * @note Must call in sequence * @param dev_hdl Device handle * @param str_desc Pointer to string descriptor * @param select Select which string descriptor. 0/1/2 for Manufacturer/Product/Serial Number string descriptors respectively * @return esp_err_t */ esp_err_t usbh_hub_enum_fill_str_desc(usb_device_handle_t dev_hdl, const usb_str_desc_t *str_desc, int select); /** * @brief Indicate the device enumeration is completed * * This will all the device to be opened by clients, and also trigger a USBH_EVENT_DEV_NEW event. * * @note Hub Driver only * @note Must call in sequence * @note This function can block * @param[in] dev_hdl Device handle * @return esp_err_t */ esp_err_t usbh_hub_enum_done(usb_device_handle_t dev_hdl); /** * @brief Indicate that device enumeration has failed * * This will cause the enumerating device's resources to be cleaned up * The Hub Driver must guarantee that the enumerating device's default pipe is already halted, flushed, and dequeued. * * @note Hub Driver only * @note Must call in sequence * @note This function can block * @param[in] dev_hdl Device handle * @return esp_err_t */ esp_err_t usbh_hub_enum_failed(usb_device_handle_t dev_hdl); #ifdef __cplusplus } #endif