// Copyright 2015-2020 The Apache Software Foundation // Modifications Copyright 2017-2020 Espressif Systems (Shanghai) CO., LTD. // // Portions of this software were developed at Runtime Inc, copyright 2015. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #include "esp_log.h" #include "nvs_flash.h" /* BLE */ #include "nimble/nimble_port.h" #include "nimble/nimble_port_freertos.h" #include "host/ble_hs.h" #include "host/util/util.h" #include "console/console.h" #include "services/gap/ble_svc_gap.h" #include "bleprph.h" /* WIFI */ #include #include "freertos/FreeRTOS.h" #include "freertos/task.h" #include "freertos/event_groups.h" #include "esp_system.h" #include "esp_wifi.h" #include "esp_event.h" #include "esp_log.h" #include "nvs_flash.h" #include "ping/ping_sock.h" #include "lwip/err.h" #include "lwip/sys.h" #include "lwip/inet.h" #include "lwip/netdb.h" #include "lwip/sockets.h" #define EXAMPLE_ESP_WIFI_SSID CONFIG_EXAMPLE_ESP_WIFI_SSID #define EXAMPLE_ESP_WIFI_PASS CONFIG_EXAMPLE_ESP_WIFI_PASSWORD #define EXAMPLE_ESP_MAXIMUM_RETRY CONFIG_EXAMPLE_ESP_MAXIMUM_RETRY #define EXAMPLE_PING_IP CONFIG_EXAMPLE_ESP_PING_IP #define EXAMPLE_PING_COUNT CONFIG_EXAMPLE_ESP_PING_COUNT #define EXAMPLE_PING_INTERVAL 1 static int bleprph_gap_event(struct ble_gap_event *event, void *arg); static uint8_t own_addr_type; /* FreeRTOS event group to signal when we are connected*/ static EventGroupHandle_t s_wifi_event_group; /* The event group allows multiple bits for each event, but we only care about two events: * - we are connected to the AP with an IP * - we failed to connect after the maximum amount of retries */ #define WIFI_CONNECTED_BIT BIT0 #define WIFI_FAIL_BIT BIT1 static const char *TAG = "wifi_prph_coex"; static int s_retry_num = 0; static void event_handler(void* arg, esp_event_base_t event_base, int32_t event_id, void* event_data) { if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_START) { esp_wifi_connect(); } else if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_DISCONNECTED) { if (s_retry_num < EXAMPLE_ESP_MAXIMUM_RETRY) { esp_wifi_connect(); s_retry_num++; ESP_LOGI(TAG, "retry to connect to the AP"); } else { xEventGroupSetBits(s_wifi_event_group, WIFI_FAIL_BIT); } ESP_LOGI(TAG,"connect to the AP fail"); } else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) { ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data; ESP_LOGI(TAG, "got ip:" IPSTR, IP2STR(&event->ip_info.ip)); s_retry_num = 0; xEventGroupSetBits(s_wifi_event_group, WIFI_CONNECTED_BIT); } } void wifi_init_sta(void) { s_wifi_event_group = xEventGroupCreate(); ESP_ERROR_CHECK(esp_netif_init()); ESP_ERROR_CHECK(esp_event_loop_create_default()); esp_netif_create_default_wifi_sta(); wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT(); ESP_ERROR_CHECK(esp_wifi_init(&cfg)); esp_event_handler_instance_t instance_any_id; esp_event_handler_instance_t instance_got_ip; ESP_ERROR_CHECK(esp_event_handler_instance_register(WIFI_EVENT, ESP_EVENT_ANY_ID, &event_handler, NULL, &instance_any_id)); ESP_ERROR_CHECK(esp_event_handler_instance_register(IP_EVENT, IP_EVENT_STA_GOT_IP, &event_handler, NULL, &instance_got_ip)); wifi_config_t wifi_config = { .sta = { .ssid = EXAMPLE_ESP_WIFI_SSID, .password = EXAMPLE_ESP_WIFI_PASS, /* Setting a password implies station will connect to all security modes including WEP/WPA. * However these modes are deprecated and not advisable to be used. Incase your Access point * doesn't support WPA2, these mode can be enabled by commenting below line */ .threshold.authmode = WIFI_AUTH_WPA2_PSK, }, }; ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) ); ESP_ERROR_CHECK(esp_wifi_set_config(WIFI_IF_STA, &wifi_config) ); ESP_ERROR_CHECK(esp_wifi_start() ); ESP_LOGI(TAG, "wifi_init_sta finished."); /* Waiting until either the connection is established (WIFI_CONNECTED_BIT) or connection failed for the maximum * number of re-tries (WIFI_FAIL_BIT). The bits are set by event_handler() (see above) */ EventBits_t bits = xEventGroupWaitBits(s_wifi_event_group, WIFI_CONNECTED_BIT | WIFI_FAIL_BIT, pdFALSE, pdFALSE, portMAX_DELAY); /* xEventGroupWaitBits() returns the bits before the call returned, hence we can test which event actually * happened. */ if (bits & WIFI_CONNECTED_BIT) { ESP_LOGI(TAG, "connected to ap SSID:%s password:%s", EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS); } else if (bits & WIFI_FAIL_BIT) { ESP_LOGI(TAG, "Failed to connect to SSID:%s, password:%s", EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS); } else { ESP_LOGE(TAG, "UNEXPECTED EVENT"); } /* The event will not be processed after unregister */ ESP_ERROR_CHECK(esp_event_handler_instance_unregister(IP_EVENT, IP_EVENT_STA_GOT_IP, instance_got_ip)); ESP_ERROR_CHECK(esp_event_handler_instance_unregister(WIFI_EVENT, ESP_EVENT_ANY_ID, instance_any_id)); vEventGroupDelete(s_wifi_event_group); } static void cmd_ping_on_ping_success(esp_ping_handle_t hdl, void *args) { uint8_t ttl; uint16_t seqno; uint32_t elapsed_time, recv_len; ip_addr_t target_addr; esp_ping_get_profile(hdl, ESP_PING_PROF_SEQNO, &seqno, sizeof(seqno)); esp_ping_get_profile(hdl, ESP_PING_PROF_TTL, &ttl, sizeof(ttl)); esp_ping_get_profile(hdl, ESP_PING_PROF_IPADDR, &target_addr, sizeof(target_addr)); esp_ping_get_profile(hdl, ESP_PING_PROF_SIZE, &recv_len, sizeof(recv_len)); esp_ping_get_profile(hdl, ESP_PING_PROF_TIMEGAP, &elapsed_time, sizeof(elapsed_time)); printf("%" PRIu32 "bytes from %s icmp_seq=%d ttl=%d time=%" PRIu32 "ms\n", recv_len, inet_ntoa(target_addr.u_addr.ip4), seqno, ttl, elapsed_time); } static void cmd_ping_on_ping_timeout(esp_ping_handle_t hdl, void *args) { uint16_t seqno; ip_addr_t target_addr; esp_ping_get_profile(hdl, ESP_PING_PROF_SEQNO, &seqno, sizeof(seqno)); esp_ping_get_profile(hdl, ESP_PING_PROF_IPADDR, &target_addr, sizeof(target_addr)); printf("From %s icmp_seq=%d timeout\n", inet_ntoa(target_addr.u_addr.ip4), seqno); } static void cmd_ping_on_ping_end(esp_ping_handle_t hdl, void *args) { ip_addr_t target_addr; uint32_t transmitted; uint32_t received; uint32_t total_time_ms; esp_ping_get_profile(hdl, ESP_PING_PROF_REQUEST, &transmitted, sizeof(transmitted)); esp_ping_get_profile(hdl, ESP_PING_PROF_REPLY, &received, sizeof(received)); esp_ping_get_profile(hdl, ESP_PING_PROF_IPADDR, &target_addr, sizeof(target_addr)); esp_ping_get_profile(hdl, ESP_PING_PROF_DURATION, &total_time_ms, sizeof(total_time_ms)); uint32_t loss = (uint32_t)((1 - ((float)received) / transmitted) * 100); if (IP_IS_V4(&target_addr)) { printf("\n--- %s ping statistics ---\n", inet_ntoa(*ip_2_ip4(&target_addr))); } else { printf("\n--- %s ping statistics ---\n", inet6_ntoa(*ip_2_ip6(&target_addr))); } printf("%" PRIu32 "packets transmitted, %" PRIu32 " received, %" PRIu32 "%% packet loss, time %" PRIu32 "ms\n", transmitted, received, loss, total_time_ms); // delete the ping sessions, so that we clean up all resources and can create a new ping session // we don't have to call delete function in the callback, instead we can call delete function from other tasks esp_ping_delete_session(hdl); } static int do_ping_cmd(void) { esp_ping_config_t config = ESP_PING_DEFAULT_CONFIG(); static esp_ping_handle_t ping; config.interval_ms = (uint32_t)(EXAMPLE_PING_INTERVAL * 1000); config.count = (uint32_t)(EXAMPLE_PING_COUNT); // parse IP address ip_addr_t target_addr; struct addrinfo hint; struct addrinfo *res = NULL; memset(&hint, 0, sizeof(hint)); memset(&target_addr, 0, sizeof(target_addr)); /* convert domain name to IP address */ if (getaddrinfo(EXAMPLE_PING_IP, NULL, &hint, &res) != 0) { printf("ping: unknown host %s\n", EXAMPLE_PING_IP); return 1; } if (res->ai_family == AF_INET) { struct in_addr addr4 = ((struct sockaddr_in *) (res->ai_addr))->sin_addr; inet_addr_to_ip4addr(ip_2_ip4(&target_addr), &addr4); } else { struct in6_addr addr6 = ((struct sockaddr_in6 *) (res->ai_addr))->sin6_addr; inet6_addr_to_ip6addr(ip_2_ip6(&target_addr), &addr6); } freeaddrinfo(res); config.target_addr = target_addr; /* set callback functions */ esp_ping_callbacks_t cbs = { .on_ping_success = cmd_ping_on_ping_success, .on_ping_timeout = cmd_ping_on_ping_timeout, .on_ping_end = cmd_ping_on_ping_end, .cb_args = NULL }; esp_ping_new_session(&config, &cbs, &ping); esp_ping_start(ping); return 0; } void ble_store_config_init(void); /** * Logs information about a connection to the console. */ static void bleprph_print_conn_desc(struct ble_gap_conn_desc *desc) { ESP_LOGI(TAG, "handle=%d our_ota_addr_type=%d our_ota_addr=%02x:%02x:%02x:%02x:%02x:%02x", desc->conn_handle, desc->our_ota_addr.type, desc->our_ota_addr.val[5], desc->our_ota_addr.val[4], desc->our_ota_addr.val[3], desc->our_ota_addr.val[2], desc->our_ota_addr.val[1], desc->our_ota_addr.val[0]); ESP_LOGI(TAG, "our_id_addr_type=%d our_id_addr=%02x:%02x:%02x:%02x:%02x:%02x", desc->our_id_addr.type, desc->our_id_addr.val[5], desc->our_id_addr.val[4], desc->our_id_addr.val[3], desc->our_id_addr.val[2], desc->our_id_addr.val[1], desc->our_id_addr.val[0]); ESP_LOGI(TAG, "peer_ota_addr_type=%d peer_ota_addr=%02x:%02x:%02x:%02x:%02x:%02x", desc->peer_ota_addr.type, desc->peer_ota_addr.val[5], desc->peer_ota_addr.val[4], desc->peer_ota_addr.val[3], desc->peer_ota_addr.val[2], desc->peer_ota_addr.val[1], desc->peer_ota_addr.val[0]); ESP_LOGI(TAG, "peer_id_addr_type=%d peer_id_addr=%02x:%02x:%02x:%02x:%02x:%02x", desc->peer_id_addr.type, desc->peer_id_addr.val[5], desc->peer_id_addr.val[4], desc->peer_id_addr.val[3], desc->peer_id_addr.val[2], desc->peer_id_addr.val[1], desc->peer_id_addr.val[0]); ESP_LOGI(TAG, "conn_itvl=%d conn_latency=%d supervision_timeout=%d " "encrypted=%d authenticated=%d bonded=%d", desc->conn_itvl, desc->conn_latency, desc->supervision_timeout, desc->sec_state.encrypted, desc->sec_state.authenticated, desc->sec_state.bonded); } /** * Enables advertising with the following parameters: * o General discoverable mode. * o Undirected connectable mode. */ static void bleprph_advertise(void) { struct ble_gap_adv_params adv_params; struct ble_hs_adv_fields fields; const char *name; int rc; /** * Set the advertisement data included in our advertisements: * o Flags (indicates advertisement type and other general info). * o Advertising tx power. * o Device name. * o 16-bit service UUIDs (alert notifications). */ memset(&fields, 0, sizeof fields); /* Advertise two flags: * o Discoverability in forthcoming advertisement (general) * o BLE-only (BR/EDR unsupported). */ fields.flags = BLE_HS_ADV_F_DISC_GEN | BLE_HS_ADV_F_BREDR_UNSUP; /* Indicate that the TX power level field should be included; have the * stack fill this value automatically. This is done by assigning the * special value BLE_HS_ADV_TX_PWR_LVL_AUTO. */ fields.tx_pwr_lvl_is_present = 1; fields.tx_pwr_lvl = BLE_HS_ADV_TX_PWR_LVL_AUTO; name = ble_svc_gap_device_name(); fields.name = (uint8_t *)name; fields.name_len = strlen(name); fields.name_is_complete = 1; fields.uuids16 = (ble_uuid16_t[]) { BLE_UUID16_INIT(GATT_SVR_SVC_ALERT_UUID) }; fields.num_uuids16 = 1; fields.uuids16_is_complete = 1; rc = ble_gap_adv_set_fields(&fields); if (rc != 0) { ESP_LOGE(TAG, "error setting advertisement data; rc=%d", rc); return; } /* Begin advertising. */ memset(&adv_params, 0, sizeof adv_params); adv_params.conn_mode = BLE_GAP_CONN_MODE_UND; adv_params.disc_mode = BLE_GAP_DISC_MODE_GEN; rc = ble_gap_adv_start(own_addr_type, NULL, BLE_HS_FOREVER, &adv_params, bleprph_gap_event, NULL); if (rc != 0) { ESP_LOGE(TAG, "error enabling advertisement; rc=%d", rc); return; } } /** * The nimble host executes this callback when a GAP event occurs. The * application associates a GAP event callback with each connection that forms. * bleprph uses the same callback for all connections. * * @param event The type of event being signalled. * @param ctxt Various information pertaining to the event. * @param arg Application-specified argument; unused by * bleprph. * * @return 0 if the application successfully handled the * event; nonzero on failure. The semantics * of the return code is specific to the * particular GAP event being signalled. */ static int bleprph_gap_event(struct ble_gap_event *event, void *arg) { struct ble_gap_conn_desc desc; int rc; switch (event->type) { case BLE_GAP_EVENT_CONNECT: /* A new connection was established or a connection attempt failed. */ ESP_LOGI(TAG, "connection %s; status=%d ", event->connect.status == 0 ? "established" : "failed", event->connect.status); if (event->connect.status == 0) { rc = ble_gap_conn_find(event->connect.conn_handle, &desc); assert(rc == 0); bleprph_print_conn_desc(&desc); } if (event->connect.status != 0) { /* Connection failed; resume advertising. */ bleprph_advertise(); } return 0; case BLE_GAP_EVENT_DISCONNECT: ESP_LOGI(TAG, "disconnect; reason=%d ", event->disconnect.reason); bleprph_print_conn_desc(&event->disconnect.conn); /* Connection terminated; resume advertising. */ bleprph_advertise(); return 0; case BLE_GAP_EVENT_CONN_UPDATE: /* The central has updated the connection parameters. */ ESP_LOGI(TAG, "connection updated; status=%d ", event->conn_update.status); rc = ble_gap_conn_find(event->conn_update.conn_handle, &desc); assert(rc == 0); bleprph_print_conn_desc(&desc); return 0; case BLE_GAP_EVENT_ADV_COMPLETE: ESP_LOGI(TAG, "advertise complete; reason=%d", event->adv_complete.reason); bleprph_advertise(); return 0; case BLE_GAP_EVENT_ENC_CHANGE: /* Encryption has been enabled or disabled for this connection. */ ESP_LOGI(TAG, "encryption change event; status=%d ", event->enc_change.status); rc = ble_gap_conn_find(event->enc_change.conn_handle, &desc); assert(rc == 0); bleprph_print_conn_desc(&desc); return 0; case BLE_GAP_EVENT_SUBSCRIBE: ESP_LOGI(TAG, "subscribe event; conn_handle=%d attr_handle=%d " "reason=%d prevn=%d curn=%d previ=%d curi=%d", event->subscribe.conn_handle, event->subscribe.attr_handle, event->subscribe.reason, event->subscribe.prev_notify, event->subscribe.cur_notify, event->subscribe.prev_indicate, event->subscribe.cur_indicate); return 0; case BLE_GAP_EVENT_MTU: ESP_LOGI(TAG, "mtu update event; conn_handle=%d cid=%d mtu=%d", event->mtu.conn_handle, event->mtu.channel_id, event->mtu.value); return 0; case BLE_GAP_EVENT_REPEAT_PAIRING: /* We already have a bond with the peer, but it is attempting to * establish a new secure link. This app sacrifices security for * convenience: just throw away the old bond and accept the new link. */ /* Delete the old bond. */ rc = ble_gap_conn_find(event->repeat_pairing.conn_handle, &desc); assert(rc == 0); ble_store_util_delete_peer(&desc.peer_id_addr); /* Return BLE_GAP_REPEAT_PAIRING_RETRY to indicate that the host should * continue with the pairing operation. */ return BLE_GAP_REPEAT_PAIRING_RETRY; } return 0; } static void bleprph_on_reset(int reason) { ESP_LOGE(TAG, "Resetting state; reason=%d", reason); } static void bleprph_on_sync(void) { int rc; rc = ble_hs_util_ensure_addr(0); assert(rc == 0); /* Figure out address to use while advertising (no privacy for now) */ rc = ble_hs_id_infer_auto(0, &own_addr_type); if (rc != 0) { ESP_LOGE(TAG, "error determining address type; rc=%d", rc); return; } /* Printing ADDR */ uint8_t addr_val[6] = {0}; rc = ble_hs_id_copy_addr(own_addr_type, addr_val, NULL); ESP_LOGI(TAG, "Device Address:%02x:%02x:%02x:%02x:%02x:%02x", addr_val[5], addr_val[4], addr_val[3], addr_val[2], addr_val[1], addr_val[0]); /* Begin advertising. */ bleprph_advertise(); } void bleprph_host_task(void *param) { ESP_LOGI(TAG, "BLE Host Task Started"); /* This function will return only when nimble_port_stop() is executed */ nimble_port_run(); nimble_port_freertos_deinit(); } void app_main(void) { int rc; /* Initialize NVS — it is used to store PHY calibration data */ esp_err_t ret = nvs_flash_init(); if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) { ESP_ERROR_CHECK(nvs_flash_erase()); ret = nvs_flash_init(); } ESP_ERROR_CHECK(ret); ESP_LOGI(TAG, "ESP_WIFI_MODE_STA"); wifi_init_sta(); do_ping_cmd(); ret = nimble_port_init(); if (ret != ESP_OK) { ESP_LOGE(TAG, "Failed to init nimble %d ", ret); return; } /* Initialize the NimBLE host configuration. */ ble_hs_cfg.reset_cb = bleprph_on_reset; ble_hs_cfg.sync_cb = bleprph_on_sync; ble_hs_cfg.gatts_register_cb = gatt_svr_register_cb; ble_hs_cfg.store_status_cb = ble_store_util_status_rr; rc = gatt_svr_init(); assert(rc == 0); /* Set the default device name. */ rc = ble_svc_gap_device_name_set("nimble-bleprph"); assert(rc == 0); /* XXX Need to have template for store */ ble_store_config_init(); nimble_port_freertos_init(bleprph_host_task); }