Digital To Analog Converter (DAC) ================================= {IDF_TARGET_DAC_CH_1: default = "GPIO25", esp32 = "GPIO25", esp32s2 = "GPIO17"} {IDF_TARGET_DAC_CH_2: default = "GPIO26", esp32 = "GPIO26", esp32s2 = "GPIO18"} Overview -------- {IDF_TARGET_NAME} has two 8-bit DAC (digital to analog converter) channels, connected to {IDF_TARGET_DAC_CH_1} (Channel 1) and {IDF_TARGET_DAC_CH_2} (Channel 2). The DAC driver allows these channels to be set to arbitrary voltages. .. only:: esp32 The DAC channels can also be driven with DMA-style written sample data by the digital controller, via the :doc:`I2S driver ` when using the "built-in DAC mode". .. only:: esp32s2 The DAC channels can also be driven with DMA-style written sample data by the digital controller, however the driver does not supported this yet. For other analog output options, see the :doc:`Sigma-delta Modulation module ` and the :doc:`LED Control module `. Both these modules produce high frequency PWM output, which can be hardware low-pass filtered in order to generate a lower frequency analog output. Application Example ------------------- Setting DAC channel 1 ({IDF_TARGET_DAC_CH_1}) voltage to approx 0.78 of VDD_A voltage (VDD * 200 / 255). For VDD_A 3.3V, this is 2.59V:: #include ... dac_output_enable(DAC_CHANNEL_1); dac_output_voltage(DAC_CHANNEL_1, 200); API Reference ------------- .. include-build-file:: inc/dac.inc .. include-build-file:: inc/dac_common.inc GPIO Lookup Macros ^^^^^^^^^^^^^^^^^^ Some useful macros can be used to specified the GPIO number of a DAC channel, or vice versa. e.g. 1. ``DAC_CHANNEL_1_GPIO_NUM`` is the GPIO number of channel 1 ({IDF_TARGET_DAC_CH_1}); 2. ``DAC_{IDF_TARGET_DAC_CH_2}_CHANNEL`` is the channel number of GPIO 26 (channel 2). .. include-build-file:: inc/dac_channel.inc .. include-build-file:: inc/dac_types.inc