/* * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #include "sdkconfig.h" #include #include "soc/soc_caps.h" #include "soc/periph_defs.h" #include "soc/system_reg.h" #include "hal/crosscore_int_ll.h" #include "hal/systimer_hal.h" #include "hal/systimer_ll.h" #include "riscv/rvruntime-frames.h" #include "riscv/rv_utils.h" #include "riscv/interrupt.h" #include "esp_private/crosscore_int.h" #include "esp_private/esp_int_wdt.h" #include "esp_private/periph_ctrl.h" #include "esp_private/systimer.h" #include "esp_attr.h" #include "esp_system.h" #include "esp_heap_caps_init.h" #include "esp_task_wdt.h" #include "esp_task.h" #include "esp_intr_alloc.h" #include "esp_log.h" #include "FreeRTOS.h" /* This pulls in portmacro.h */ #include "task.h" #include "port_systick.h" #include "portmacro.h" #include "esp_memory_utils.h" #ifdef CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER #include "soc/periph_defs.h" #include "soc/system_reg.h" #include "hal/systimer_hal.h" #include "hal/systimer_ll.h" #endif #ifdef CONFIG_PM_TRACE #include "esp_private/pm_trace.h" #endif //CONFIG_PM_TRACE _Static_assert(portBYTE_ALIGNMENT == 16, "portBYTE_ALIGNMENT must be set to 16"); #if CONFIG_ESP_SYSTEM_HW_STACK_GUARD /** * offsetof() can not be used in asm code. Then we need make sure that * PORT_OFFSET_PX_STACK and PORT_OFFSET_PX_END_OF_STACK have expected values. * Macro used in the portasm.S instead of variables to save at least 4 instruction calls * which accessing DRAM memory. This optimization saves CPU time in the interrupt handling. */ _Static_assert(offsetof( StaticTask_t, pxDummy6 ) == PORT_OFFSET_PX_STACK); _Static_assert(offsetof( StaticTask_t, pxDummy8 ) == PORT_OFFSET_PX_END_OF_STACK); #endif // CONFIG_ESP_SYSTEM_HW_STACK_GUARD /* ---------------------------------------------------- Variables ------------------------------------------------------ * * ------------------------------------------------------------------------------------------------------------------ */ BaseType_t uxSchedulerRunning = 0; // Duplicate of xSchedulerRunning, accessible to port files volatile UBaseType_t uxInterruptNesting = 0; portMUX_TYPE port_xTaskLock = portMUX_INITIALIZER_UNLOCKED; portMUX_TYPE port_xISRLock = portMUX_INITIALIZER_UNLOCKED; volatile BaseType_t xPortSwitchFlag = 0; __attribute__((aligned(16))) StackType_t xIsrStack[configISR_STACK_SIZE]; StackType_t *xIsrStackTop = &xIsrStack[0] + (configISR_STACK_SIZE & (~((portPOINTER_SIZE_TYPE)portBYTE_ALIGNMENT_MASK))); // Variables used for IDF style critical sections. These are orthogonal to FreeRTOS critical sections static UBaseType_t port_uxCriticalNestingIDF = 0; static UBaseType_t port_uxCriticalOldInterruptStateIDF = 0; /* ------------------------------------------------ IDF Compatibility -------------------------------------------------- * - These need to be defined for IDF to compile * ------------------------------------------------------------------------------------------------------------------ */ // ------------------ Critical Sections -------------------- void vPortEnterCritical(void) { // Save current interrupt threshold and disable interrupts UBaseType_t old_thresh = ulPortSetInterruptMask(); // Update the IDF critical nesting count port_uxCriticalNestingIDF++; if (port_uxCriticalNestingIDF == 1) { // Save a copy of the old interrupt threshold port_uxCriticalOldInterruptStateIDF = (UBaseType_t) old_thresh; } } void vPortExitCritical(void) { if (port_uxCriticalNestingIDF > 0) { port_uxCriticalNestingIDF--; if (port_uxCriticalNestingIDF == 0) { // Restore the saved interrupt threshold vPortClearInterruptMask((int)port_uxCriticalOldInterruptStateIDF); } } } // ----------------------- System -------------------------- #define STACK_WATCH_AREA_SIZE 32 #define STACK_WATCH_POINT_NUMBER (SOC_CPU_WATCHPOINTS_NUM - 1) void vPortSetStackWatchpoint(void *pxStackStart) { uint32_t addr = (uint32_t)pxStackStart; addr = (addr + (STACK_WATCH_AREA_SIZE - 1)) & (~(STACK_WATCH_AREA_SIZE - 1)); esp_cpu_set_watchpoint(STACK_WATCH_POINT_NUMBER, (char *)addr, STACK_WATCH_AREA_SIZE, ESP_CPU_WATCHPOINT_STORE); } /* ---------------------------------------------- Port Implementations ------------------------------------------------- * Implementations of Porting Interface functions * ------------------------------------------------------------------------------------------------------------------ */ // --------------------- Interrupts ------------------------ UBaseType_t ulPortSetInterruptMask(void) { int ret; unsigned old_mstatus = RV_CLEAR_CSR(mstatus, MSTATUS_MIE); ret = REG_READ(INTERRUPT_CURRENT_CORE_INT_THRESH_REG); REG_WRITE(INTERRUPT_CURRENT_CORE_INT_THRESH_REG, RVHAL_EXCM_LEVEL); RV_SET_CSR(mstatus, old_mstatus & MSTATUS_MIE); /** * In theory, this function should not return immediately as there is a * delay between the moment we mask the interrupt threshold register and * the moment a potential lower-priority interrupt is triggered (as said * above), it should have a delay of 2 machine cycles/instructions. * * However, in practice, this function has an epilogue of one instruction, * thus the instruction masking the interrupt threshold register is * followed by two instructions: `ret` and `csrrs` (RV_SET_CSR). * That's why we don't need any additional nop instructions here. */ return ret; } void vPortClearInterruptMask(UBaseType_t mask) { REG_WRITE(INTERRUPT_CURRENT_CORE_INT_THRESH_REG, mask); /** * The delay between the moment we unmask the interrupt threshold register * and the moment the potential requested interrupt is triggered is not * null: up to three machine cycles/instructions can be executed. * * When compilation size optimization is enabled, this function and its * callers returning void will have NO epilogue, thus the instruction * following these calls will be executed. * * If the requested interrupt is a context switch to a higher priority * task then the one currently running, we MUST NOT execute any instruction * before the interrupt effectively happens. * In order to prevent this, force this routine to have a 3-instruction * delay before exiting. */ asm volatile ( "nop" ); asm volatile ( "nop" ); asm volatile ( "nop" ); } BaseType_t xPortCheckIfInISR(void) { return uxInterruptNesting; } // ------------------ Critical Sections -------------------- void IRAM_ATTR vPortTakeLock( portMUX_TYPE *lock ) { spinlock_acquire( lock, portMUX_NO_TIMEOUT); } void IRAM_ATTR vPortReleaseLock( portMUX_TYPE *lock ) { spinlock_release( lock ); } // ---------------------- Yielding ------------------------- void vPortYield(void) { // TODO: IDF-8113 const int core_id = 0; if (uxInterruptNesting) { vPortYieldFromISR(); } else { esp_crosscore_int_send_yield(0); /* There are 3-4 instructions of latency between triggering the software interrupt and the CPU interrupt happening. Make sure it happened before we return, otherwise vTaskDelay() may return and execute 1-2 instructions before the delay actually happens. (We could use the WFI instruction here, but there is a chance that the interrupt will happen while evaluating the other two conditions for an instant yield, and if that happens then the WFI would be waiting for the next interrupt to occur...) */ while (uxSchedulerRunning && crosscore_int_ll_get_state(core_id) != 0) {} } } void vPortYieldFromISR( void ) { //traceISR_EXIT_TO_SCHEDULER(); uxSchedulerRunning = 1; xPortSwitchFlag = 1; } // ----------------------- System -------------------------- // ------------------- Run Time Stats ---------------------- // --------------------- TCB Cleanup ----------------------- #if ( CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS ) static void vPortTLSPointersDelCb( void *pxTCB ) { /* Typecast pxTCB to StaticTask_t type to access TCB struct members. * pvDummy15 corresponds to pvThreadLocalStoragePointers member of the TCB. */ StaticTask_t *tcb = ( StaticTask_t * )pxTCB; /* The TLSP deletion callbacks are stored at an offset of (configNUM_THREAD_LOCAL_STORAGE_POINTERS/2) */ TlsDeleteCallbackFunction_t *pvThreadLocalStoragePointersDelCallback = ( TlsDeleteCallbackFunction_t * )( &( tcb->pvDummy15[ ( configNUM_THREAD_LOCAL_STORAGE_POINTERS / 2 ) ] ) ); /* We need to iterate over half the depth of the pvThreadLocalStoragePointers area * to access all TLS pointers and their respective TLS deletion callbacks. */ for ( int x = 0; x < ( configNUM_THREAD_LOCAL_STORAGE_POINTERS / 2 ); x++ ) { if ( pvThreadLocalStoragePointersDelCallback[ x ] != NULL ) { //If del cb is set /* In case the TLSP deletion callback has been overwritten by a TLS pointer, gracefully abort. */ if ( !esp_ptr_executable( pvThreadLocalStoragePointersDelCallback[ x ] ) ) { ESP_LOGE("FreeRTOS", "Fatal error: TLSP deletion callback at index %d overwritten with non-excutable pointer %p", x, pvThreadLocalStoragePointersDelCallback[ x ]); abort(); } pvThreadLocalStoragePointersDelCallback[ x ]( x, tcb->pvDummy15[ x ] ); //Call del cb } } } #endif /* CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS */ void vPortTCBPreDeleteHook( void *pxTCB ) { #if ( CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK ) /* Call the user defined task pre-deletion hook */ extern void vTaskPreDeletionHook( void * pxTCB ); vTaskPreDeletionHook( pxTCB ); #endif /* CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK */ #if ( CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP ) /* * If the user is using the legacy task pre-deletion hook, call it. * Todo: Will be removed in IDF-8097 */ #warning "CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is deprecated. Use CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK instead." extern void vPortCleanUpTCB( void * pxTCB ); vPortCleanUpTCB( pxTCB ); #endif /* CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP */ #if ( CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS ) /* Call TLS pointers deletion callbacks */ vPortTLSPointersDelCb( pxTCB ); #endif /* CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS */ } /* ------------------------------------------------ FreeRTOS Portable -------------------------------------------------- * - Provides implementation for functions required by FreeRTOS * - Declared in portable.h * ------------------------------------------------------------------------------------------------------------------ */ // ----------------- Scheduler Start/End ------------------- BaseType_t xPortStartScheduler(void) { uxInterruptNesting = 0; port_uxCriticalNestingIDF = 0; uxSchedulerRunning = 0; /* Setup the hardware to generate the tick. */ vPortSetupTimer(); esprv_int_set_threshold(1); /* set global INTC masking level */ rv_utils_intr_global_enable(); vPortYield(); /*Should not get here*/ return pdFALSE; } void vPortEndScheduler(void) { /* very unlikely this function will be called, so just trap here */ abort(); } // ------------------------ Stack -------------------------- /** * @brief Align stack pointer in a downward growing stack * * This macro is used to round a stack pointer downwards to the nearest n-byte boundary, where n is a power of 2. * This macro is generally used when allocating aligned areas on a downward growing stack. */ #define STACKPTR_ALIGN_DOWN(n, ptr) ((ptr) & (~((n)-1))) /** * @brief Allocate and initialize GCC TLS area * * This function allocates and initializes the area on the stack used to store GCC TLS (Thread Local Storage) variables. * - The area's size is derived from the TLS section's linker variables, and rounded up to a multiple of 16 bytes * - The allocated area is aligned to a 16-byte aligned address * - The TLS variables in the area are then initialized * * Each task access the TLS variables using the THREADPTR register plus an offset to obtain the address of the variable. * The value for the THREADPTR register is also calculated by this function, and that value should be use to initialize * the THREADPTR register. * * @param[in] uxStackPointer Current stack pointer address * @param[out] ret_threadptr_reg_init Calculated THREADPTR register initialization value * @return Stack pointer that points to the TLS area */ FORCE_INLINE_ATTR UBaseType_t uxInitialiseStackTLS(UBaseType_t uxStackPointer, uint32_t *ret_threadptr_reg_init) { /* TLS layout at link-time, where 0xNNN is the offset that the linker calculates to a particular TLS variable. LOW ADDRESS |---------------------------| Linker Symbols | Section | -------------- | .flash.rodata | 0x0|---------------------------| <- _flash_rodata_start ^ | Other Data | | |---------------------------| <- _thread_local_start | | .tbss | ^ V | | | 0xNNN | int example; | | tls_area_size | | | | .tdata | V |---------------------------| <- _thread_local_end | Other data | | ... | |---------------------------| HIGH ADDRESS */ // Calculate TLS area size and round up to multiple of 16 bytes. extern char _thread_local_start, _thread_local_end, _flash_rodata_start; const uint32_t tls_area_size = ALIGNUP(16, (uint32_t)&_thread_local_end - (uint32_t)&_thread_local_start); // TODO: check that TLS area fits the stack // Allocate space for the TLS area on the stack. The area must be aligned to 16-bytes uxStackPointer = STACKPTR_ALIGN_DOWN(16, uxStackPointer - (UBaseType_t)tls_area_size); // Initialize the TLS area with the initialization values of each TLS variable memcpy((void *)uxStackPointer, &_thread_local_start, tls_area_size); /* Calculate the THREADPTR register's initialization value based on the link-time offset and the TLS area allocated on the stack. HIGH ADDRESS |---------------------------| | .tdata (*) | ^ | int example; | | | | | | .tbss (*) | | |---------------------------| <- uxStackPointer (start of TLS area) 0xNNN | | | ^ | | | | | ... | _thread_local_start - _rodata_start | | | | | | | V V | | <- threadptr register's value LOW ADDRESS */ *ret_threadptr_reg_init = (uint32_t)uxStackPointer - ((uint32_t)&_thread_local_start - (uint32_t)&_flash_rodata_start); return uxStackPointer; } #if CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER static void vPortTaskWrapper(TaskFunction_t pxCode, void *pvParameters) { __asm__ volatile(".cfi_undefined ra"); // tell to debugger that it's outermost (inital) frame extern void __attribute__((noreturn)) panic_abort(const char *details); static char DRAM_ATTR msg[80] = "FreeRTOS: FreeRTOS Task \"\0"; pxCode(pvParameters); /* FreeRTOS tasks should not return. Log the task name and abort. */ /* We cannot use s(n)printf because it is in flash */ strcat(msg, pcTaskGetName(NULL)); strcat(msg, "\" should not return, Aborting now!"); panic_abort(msg); } #endif // CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER /** * @brief Initialize the task's starting interrupt stack frame * * This function initializes the task's starting interrupt stack frame. The dispatcher will use this stack frame in a * context restore routine. Therefore, the starting stack frame must be initialized as if the task was interrupted right * before its first instruction is called. * * - The stack frame is allocated to a 16-byte aligned address * * @param[in] uxStackPointer Current stack pointer address * @param[in] pxCode Task function * @param[in] pvParameters Task function's parameter * @param[in] threadptr_reg_init THREADPTR register initialization value * @return Stack pointer that points to the stack frame */ FORCE_INLINE_ATTR UBaseType_t uxInitialiseStackFrame(UBaseType_t uxStackPointer, TaskFunction_t pxCode, void *pvParameters, uint32_t threadptr_reg_init) { /* Allocate space for the task's starting interrupt stack frame. - The stack frame must be allocated to a 16-byte aligned address. - We use RV_STK_FRMSZ (instead of sizeof(RvExcFrame)) as it rounds up the total size to a multiple of 16. */ uxStackPointer = STACKPTR_ALIGN_DOWN(16, uxStackPointer - RV_STK_FRMSZ); // Clear the entire interrupt stack frame RvExcFrame *frame = (RvExcFrame *)uxStackPointer; memset(frame, 0, sizeof(RvExcFrame)); /* Initialize the stack frame. */ extern uint32_t __global_pointer$; #if CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER frame->mepc = (UBaseType_t)vPortTaskWrapper; frame->a0 = (UBaseType_t)pxCode; frame->a1 = (UBaseType_t)pvParameters; #else frame->mepc = (UBaseType_t)pxCode; frame->a0 = (UBaseType_t)pvParameters; #endif // CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER frame->gp = (UBaseType_t)&__global_pointer$; frame->tp = (UBaseType_t)threadptr_reg_init; return uxStackPointer; } StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters) { #ifdef __clang_analyzer__ // Teach clang-tidy that pxTopOfStack cannot be a pointer to const volatile StackType_t * pxTemp = pxTopOfStack; pxTopOfStack = pxTemp; #endif /*__clang_analyzer__ */ /* HIGH ADDRESS |---------------------------| <- pxTopOfStack on entry | TLS Variables | | ------------------------- | <- Start of useable stack | Starting stack frame | | ------------------------- | <- pxTopOfStack on return (which is the tasks current SP) | | | | | | | V | ----------------------------- <- Bottom of stack LOW ADDRESS - All stack areas are aligned to 16 byte boundary - We use UBaseType_t for all of stack area initialization functions for more convenient pointer arithmetic */ UBaseType_t uxStackPointer = (UBaseType_t)pxTopOfStack; configASSERT((uxStackPointer & portBYTE_ALIGNMENT_MASK) == 0); // Initialize GCC TLS area uint32_t threadptr_reg_init; uxStackPointer = uxInitialiseStackTLS(uxStackPointer, &threadptr_reg_init); configASSERT((uxStackPointer & portBYTE_ALIGNMENT_MASK) == 0); // Initialize the starting interrupt stack frame uxStackPointer = uxInitialiseStackFrame(uxStackPointer, pxCode, pvParameters, threadptr_reg_init); configASSERT((uxStackPointer & portBYTE_ALIGNMENT_MASK) == 0); // Return the task's current stack pointer address which should point to the starting interrupt stack frame return (StackType_t *)uxStackPointer; //TODO: IDF-2393 } // ------------------- Hook Functions ---------------------- void __attribute__((weak)) vApplicationStackOverflowHook(TaskHandle_t xTask, char *pcTaskName) { #define ERR_STR1 "***ERROR*** A stack overflow in task " #define ERR_STR2 " has been detected." const char *str[] = {ERR_STR1, pcTaskName, ERR_STR2}; char buf[sizeof(ERR_STR1) + CONFIG_FREERTOS_MAX_TASK_NAME_LEN + sizeof(ERR_STR2) + 1 /* null char */] = {0}; char *dest = buf; for (int i = 0; i < sizeof(str) / sizeof(str[0]); i++) { dest = strcat(dest, str[i]); } esp_system_abort(buf); } #if ( configUSE_TICK_HOOK > 0 ) void vApplicationTickHook( void ) { esp_vApplicationTickHook(); } #endif extern void esp_vApplicationIdleHook(void); #if CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK /* By default, the port uses vApplicationMinimalIdleHook() to run IDF style idle hooks. However, users may also want to provide their own vApplicationMinimalIdleHook(). In this case, we use to -Wl,--wrap option to wrap the user provided vApplicationMinimalIdleHook() */ extern void __real_vApplicationMinimalIdleHook( void ); void __wrap_vApplicationMinimalIdleHook( void ) { esp_vApplicationIdleHook(); //Run IDF style hooks __real_vApplicationMinimalIdleHook(); //Call the user provided vApplicationMinimalIdleHook() } #else // CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK void vApplicationMinimalIdleHook( void ) { esp_vApplicationIdleHook(); //Run IDF style hooks } #endif // CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK