Migrate Peripherals to ESP-IDF 5.0 ================================== Peripheral Clock Gating ----------------------- As usual, peripheral clock gating is still handled by driver itself, users don't need to take care of the peripheral module clock gating. However, for advanced users who implement their own drivers based on ``hal`` and ``soc`` components, the previous clock gating include path has been changed from ``driver/periph_ctrl.h`` to ``esp_private/periph_ctrl.h``. RTC Subsystem Control --------------------- RTC control APIs have been moved from ``driver/rtc_cntl.h`` to ``esp_private/rtc_ctrl.h``. SPI Flash Interface ------------------- Version before v5.0, spi flash functions in rom can be included by ``esp32**/rom/spi_flash.h``. However, your code written for different chips may be filled with ROM headers of different versions. At the meantime not all the APIs can be used on all chips. Therefore, the common APIs are extracted to ``esp_rom_spiflash.h``. Although it's not a breaking change, it is strongly recommended to only use the functions with prefix ``esp_rom_spiflash`` included by ``esp_rom_spiflash.h`` for better cross-compatibility. To make the API clearer, we renamed the function ``esp_rom_spiflash_lock`` to ``esp_rom_spiflash_set_bp``. We renamed ``esp_rom_spiflash_unlock`` to ``esp_rom_spiflash_clear_bp``. ENUM type ``esp_flash_speed_t`` has been deprecated. From now on, you can directly parse the real clock frequency value to the flash initialization structure. For example, if you want the flash frequency is 80M, you can write the code like: .. code:: c esp_flash_spi_device_config_t dev_cfg = { // Other members .freq_mhz = 80, // Other members }; ADC --- - Previous ``driver/adc2_wifi_private.h`` has been moved to ``esp_private/adc2_wifi.h``. - Enums ``ADC_UNIT_BOTH``, ``ADC_UNIT_ALTER`` and ``ADC_UNIT_MAX`` in ``adc_unit_t`` are removed. - Enum ``ADC_CHANNEL_MAX`` in ``adc_channel_t`` are removed. Some channels are not supported on some chips, driver will give a dynamic error if an unsupported channels are used. - Enum ``ADC_ATTEN_MAX`` is removed. Some attenuations are not supported on some chips, driver will give a dynamic error if an unsupported attenuation is used. - Enum ``ADC_CONV_UNIT_MAX`` is removed. Some convert mode are not supported on some chips, driver will give a dynamic error if an unsupported convert mode is used. GPIO ---- The previous Kconfig option `RTCIO_SUPPORT_RTC_GPIO_DESC` has been removed, thus the ``rtc_gpio_desc`` array is unavailable. Please use ``rtc_io_desc`` array instead. Timer Group Driver ------------------ Timer Group driver has been redesigned into :doc:`GPTimer <../api-reference/peripherals/gptimer>`, which aims to unify and simplify the usage of general purpose timer. Although it's recommended to use the the new driver APIs, the legacy driver is till available in the previous include path ``driver/timer.h``. However, by default, including ``driver/timer.h`` will bring a build warning like `legacy timer group driver is deprecated, please migrate to driver/gptimer.h`. The warning can be suppressed by the Kconfig option :ref:`CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN`. The major breaking changes in concept and usage are listed as follows: Breaking Changes in Concepts ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - ``timer_group_t`` and ``timer_idx_t`` which used to identify the hardware timer are removed from user's code. In the new driver, a timer is represented by :cpp:type:`gptimer_handle_t`. - Definition of timer source clock is moved to :cpp:type:`gptimer_clock_source_t`, the previous ``timer_src_clk_t`` is not used. - Definition of timer count direction is moved to :cpp:type:`gptimer_count_direction_t`, the previous ``timer_count_dir_t`` is not used. - Only level interrupt is supported, ``timer_intr_t`` and ``timer_intr_mode_t`` are not used. - Auto-reload is enabled by set the :cpp:member:`gptimer_alarm_config_t::auto_reload_on_alarm` flag. ``timer_autoreload_t`` is not used. Breaking Changes in Usage ~~~~~~~~~~~~~~~~~~~~~~~~~ - Timer initialization is done by creating a timer instance from :cpp:func:`gptimer_new_timer`. Basic configurations like clock source, resolution and direction should be set in :cpp:type:`gptimer_config_t`. Note that, alarm event specific configurations are not needed during the driver install stage. - Alarm event is configured by :cpp:func:`gptimer_set_alarm_action`, with parameters set in the :cpp:type:`gptimer_alarm_config_t`. - Setting and getting count value are done by :cpp:func:`gptimer_get_raw_count` and :cpp:func:`gptimer_set_raw_count`. The driver doesn't help convert the raw value into UTC time-stamp. Instead, the conversion should be done form user's side as the timer resolution is also known to the user. - The driver will install the interrupt service as well if :cpp:member:`gptimer_event_callbacks_t::on_alarm` is set to a valid callback function. In the callback, user doesn't have to deal with the low level registers (like "clear interrupt status", "re-enable alarm event" and so on). So functions like ``timer_group_get_intr_status_in_isr`` and ``timer_group_get_auto_reload_in_isr`` are not used anymore. - To update the alarm configurations when alarm event happens, one can call :cpp:func:`gptimer_set_alarm_action` in the interrupt callback, then the alarm will be re-enabled again. - Alarm will always be re-enabled by the driver if :cpp:member:`gptimer_alarm_config_t::auto_reload_on_alarm` is set to true. UART ---- +-----------------------------------------------+-----------------------------------------------+----------------------------------------------------------+ | Removed/Deprecated items | Replacement | Remarks | +===============================================+===============================================+==========================================================+ | ``uart_isr_register()`` | None | UART interrupt handling is implemented by driver itself. | +-----------------------------------------------+-----------------------------------------------+----------------------------------------------------------+ | ``uart_isr_free()`` | None | UART interrupt handling is implemented by driver itself. | +-----------------------------------------------+-----------------------------------------------+----------------------------------------------------------+ | ``use_ref_tick`` in :cpp:type:`uart_config_t` | :cpp:member:`uart_config_t::source_clk` | Select the clock source. | +-----------------------------------------------+-----------------------------------------------+----------------------------------------------------------+ | ``uart_enable_pattern_det_intr()`` | :cpp:func:`uart_enable_pattern_det_baud_intr` | Enable pattern detection interrupt. | +-----------------------------------------------+-----------------------------------------------+----------------------------------------------------------+ I2C --- +--------------------------+-------------+---------------------------------------------------------+ | Removed/Deprecated items | Replacement | Remarks | +==========================+=============+=========================================================+ | ``i2c_isr_register()`` | None | I2C interrupt handling is implemented by driver itself. | +--------------------------+-------------+---------------------------------------------------------+ | ``i2c_isr_register()`` | None | I2C interrupt handling is implemented by driver itself. | +--------------------------+-------------+---------------------------------------------------------+ | ``i2c_opmode_t`` | None | It's not used anywhere in esp-idf. | +--------------------------+-------------+---------------------------------------------------------+ SPI --- +--------------------------+----------------------------------+---------------------------------+ | Removed/Deprecated items | Replacement | Remarks | +==========================+==================================+=================================+ | ``spi_cal_clock()`` | :cpp:func:`spi_get_actual_clock` | Get SPI real working frequency. | +--------------------------+----------------------------------+---------------------------------+ .. only:: SOC_SDMMC_HOST_SUPPORTED SDMMC ----- +----------------------------+----------------------------------------------+--------------------------+ | Removed/Deprecated items | Replacement | Remarks | +============================+==============================================+==========================+ | ``sdmmc_host_pullup_en()`` | set ``SDMMC_SLOT_FLAG_INTERNAL_PULLUP`` flag | Enable internal pull up. | | | in :cpp:member:`sdmmc_slot_config_t::flags` | | +----------------------------+----------------------------------------------+--------------------------+ LEDC ----- +------------------------------------------------+----------------------------------------------------+-----------------------------------+ | Removed/Deprecated items | Replacement | Remarks | +================================================+====================================================+===================================+ | ``bit_num`` in :cpp:type:`ledc_timer_config_t` | :cpp:member:`ledc_timer_config_t::duty_resolution` | Set resolution of the duty cycle. | +------------------------------------------------+----------------------------------------------------+-----------------------------------+ .. only:: SOC_PCNT_SUPPORTED Pulse Counter Driver -------------------- Pulse counter driver has been redesigned (see :doc:`PCNT <../api-reference/peripherals/pcnt>`), which aims to unify and simplify the usage of PCNT peripheral. Although it's recommended to use the new driver APIs, the legacy driver is still available in the previous include path ``driver/pcnt.h``. However, by default, including ``driver/pcnt.h`` will bring a build warning like `legacy pcnt driver is deprecated, please migrate to use driver/pulse_cnt.h`. The warning can be suppressed by the Kconfig option :ref:`CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN`. The major breaking changes in concept and usage are listed as follows: Breaking Changes in Concepts ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - ``pcnt_port_t``, ``pcnt_unit_t`` and ``pcnt_channel_t`` which used to identify the hardware unit and channel are removed from user's code. In the new driver, PCNT unit is represented by :cpp:type:`pcnt_unit_handle_t`, likewise, PCNT channel is represented by :cpp:type:`pcnt_channel_handle_t`. Both of them are opaque pointers. - ``pcnt_evt_type_t`` is not used any more, they have been replaced by a universal **Watch Point Event**. In the event callback :cpp:type:`pcnt_watch_cb_t`, it's still possible to distinguish different watch points from :cpp:type:`pcnt_watch_event_data_t`. - ``pcnt_count_mode_t`` is replaced by :cpp:type:`pcnt_channel_edge_action_t`, and ``pcnt_ctrl_mode_t`` is replaced by :cpp:type:`pcnt_channel_level_action_t`. Breaking Changes in Usage ~~~~~~~~~~~~~~~~~~~~~~~~~ - In the legacy driver, the PCNT unit configuration and channel configuration were combined into a single function: ``pcnt_unit_config``. Now this is split into two factory APIs: :cpp:func:`pcnt_new_unit` and :cpp:func:`pcnt_new_channel`. Only the count range is necessary for initializing a PCNT unit. GPIO number assignment has been moved to :cpp:func:`pcnt_new_channel`. High/Low control mode and positive/negative edge count mode are set by stand-alone functions: :cpp:func:`pcnt_channel_set_edge_action` and :cpp:func:`pcnt_channel_set_level_action`. - ``pcnt_get_counter_value`` is replaced by :cpp:func:`pcnt_unit_get_count`. - ``pcnt_counter_pause`` is replaced by :cpp:func:`pcnt_unit_stop`. - ``pcnt_counter_resume`` is replaced by :cpp:func:`pcnt_unit_start`. - ``pcnt_counter_clear`` is replaced by :cpp:func:`pcnt_unit_clear_count`. - ``pcnt_intr_enable`` and ``pcnt_intr_disable`` are removed. In the new driver, the interrupt is enabled by registering event callbacks :cpp:func:`pcnt_unit_register_event_callbacks`. - ``pcnt_event_enable`` and ``pcnt_event_disable`` are removed. In the new driver, the PCNT events are enabled/disabled by adding/removing watch points :cpp:func:`pcnt_unit_add_watch_point`, :cpp:func:`pcnt_unit_remove_watch_point`. - ``pcnt_set_event_value`` is removed. In the new driver, event value is also set when adding watch point by :cpp:func:`pcnt_unit_add_watch_point`. - ``pcnt_get_event_value`` and ``pcnt_get_event_status`` are removed. In the new driver, these information are provided by event callback :cpp:type:`pcnt_watch_cb_t` in the :cpp:type:`pcnt_watch_event_data_t`. - ``pcnt_isr_register`` and ``pcnt_isr_unregister`` are removed. Register of the ISR handler from user code is no longer permitted. Users should register event callbacks instead by calling :cpp:func:`pcnt_unit_register_event_callbacks`. - ``pcnt_set_pin`` is removed and the new driver no longer allows the switching of the GPIO at runtime. If you want to change to other GPIOs, please delete the existing PCNT channel by :cpp:func:`pcnt_del_channel` and reinstall with the new GPIO number by :cpp:func:`pcnt_new_channel`. - ``pcnt_filter_enable``, ``pcnt_filter_disable``, and ``pcnt_set_filter_value`` are replaced by :cpp:func:`pcnt_unit_set_glitch_filter`. Meanwhile, ``pcnt_get_filter_value`` has been removed. - ``pcnt_set_mode`` is replaced by :cpp:func:`pcnt_channel_set_edge_action` and :cpp:func:`pcnt_channel_set_level_action`. - ``pcnt_isr_service_install``, ``pcnt_isr_service_uninstall``, ``pcnt_isr_handler_add`` and ``pcnt_isr_handler_remove`` are replaced by :cpp:func:`pcnt_unit_register_event_callbacks`. The default ISR handler is lazy installed in the new driver. .. only:: SOC_TEMP_SENSOR_SUPPORTED Temperature Sensor Driver ------------------------- - Old API header ``temp_sensor.h`` has been redesigned as ``temperature_sensor.h``, it is recommended to use the new driver and the old driver is not allowed to be used at the same time. - Although it's recommended to use the new driver APIs, the legacy driver is still available in the previous include path ``driver/temp_sensor.h``. However, by default, including ``driver/temp_sensor.h`` will bring a build warning like "legacy temperature sensor driver is deprecated, please migrate to driver/temperature_sensor.h". The warning can be suppressed by enabling the menuconfig option :ref:`CONFIG_TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN`. - Configuration contents has been changed. In old version, user need to configure the ``clk_div`` and ``dac_offset``. While in new version, user only need to choose ``tsens_range`` - The process of using temperature sensor has been changed. In old version, user can use ``config->start->read_celsius`` to get value. In the new version, user must install the temperature sensor driver firstly, by ``temperature_sensor_install`` and uninstall it when finished. For more information, you can refer to :doc:`Temperature Sensor <../api-reference/peripherals/temp_sensor>` . .. only:: SOC_RMT_SUPPORTED RMT Driver ---------- RMT driver has been redesigned (see :doc:`RMT transceiver <../api-reference/peripherals/rmt>`), which aims to unify and extend the usage of RMT peripheral. Although it's recommended to use the new driver APIs, the legacy driver is still available in the previous include path ``driver/rmt.h``. However, by default, including ``driver/rmt.h`` will bring a build warning like `The legacy RMT driver is deprecated, please use driver/rmt_tx.h and/or driver/rmt_rx.h`. The warning can be suppressed by the Kconfig option :ref:`CONFIG_RMT_SUPPRESS_DEPRECATE_WARN`. The major breaking changes in concept and usage are listed as follows: Breaking Changes in Concepts ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - ``rmt_channel_t`` which used to identify the hardware channel are removed from user space. In the new driver, RMT channel is represented by :cpp:type:`rmt_channel_handle_t`. The channel is dynamic allocated by the driver, instead of designated by user. - ``rmt_item32_t`` is replaced by :cpp:type:`rmt_symbol_word_t`, which avoids a nested union inside a struct. - ``rmt_mem_t`` is removed, as we don't allow users to access RMT memory block (a.k.an RMTMEM) directly. Direct access to RMTMEM doesn't make sense but make mistakes, especially when the RMT channel also connected with a DMA channel. - ``rmt_mem_owner_t`` is removed, as the ownership is controller by driver, not by user anymore. - ``rmt_source_clk_t`` is replaced by :cpp:type:`rmt_clock_source_t`, note they're not binary compatible. - ``rmt_data_mode_t`` is removed, the RMT memory access mode is configured to always use Non-FIFO and DMA mode. - ``rmt_mode_t`` is removed, as the driver has stand alone install functions for TX and RX channels. - ``rmt_idle_level_t`` is removed, setting IDLE level for TX channel is available in :cpp:member:`rmt_transmit_config_t::eot_level`. - ``rmt_carrier_level_t`` is removed, setting carrier polarity is available in :cpp:member:`rmt_carrier_config_t::polarity_active_low`. - ``rmt_channel_status_t`` and ``rmt_channel_status_result_t`` are removed, they're not used anywhere. - transmitting by RMT channel doesn't expect user to prepare the RMT symbols, instead, user needs to provide an RMT Encoder to tell the driver how to convert user data into RMT symbols. Breaking Changes in Usage ~~~~~~~~~~~~~~~~~~~~~~~~~ - Channel installation has been separated for TX and RX channels into :cpp:func:`rmt_new_tx_channel` and :cpp:func:`rmt_new_rx_channel`. - ``rmt_set_clk_div`` and ``rmt_get_clk_div`` are removed. Channel clock configuration can only be done during channel installation. - ``rmt_set_rx_idle_thresh`` and ``rmt_get_rx_idle_thresh`` are removed. In the new driver, the RX channel IDLE threshold is redesigned into a new concept :cpp:member:`rmt_receive_config_t::signal_range_max_ns`. - ``rmt_set_mem_block_num`` and ``rmt_get_mem_block_num`` are removed. In the new driver, the memory block number is determined by :cpp:member:`rmt_tx_channel_config_t::mem_block_symbols` and :cpp:member:`rmt_rx_channel_config_t::mem_block_symbols`. - ``rmt_set_tx_carrier`` is removed, the new driver uses :cpp:func:`rmt_apply_carrier` to set carrier behavior. - ``rmt_set_mem_pd`` and ``rmt_get_mem_pd`` are removed. The memory power is managed by the driver automatically. - ``rmt_memory_rw_rst``, ``rmt_tx_memory_reset`` and ``rmt_rx_memory_reset`` are removed. Memory reset is managed by the driver automatically. - ``rmt_tx_start`` and ``rmt_rx_start`` are merged into a single function :cpp:func:`rmt_enable`, for both TX and RX channels. - ``rmt_tx_stop`` and ``rmt_rx_stop`` are merged into a single function :cpp:func:`rmt_disable`, for both TX and RX channels. - ``rmt_set_memory_owner`` and ``rmt_get_memory_owner`` are removed. RMT memory owner guard is added automatically by the driver. - ``rmt_set_tx_loop_mode`` and ``rmt_get_tx_loop_mode`` are removed. In the new driver, the loop mode is configured in :cpp:member:`rmt_transmit_config_t::loop_count`. - ``rmt_set_source_clk`` and ``rmt_get_source_clk`` are removed. Configuring clock source is only possible during channel installation by :cpp:member:`rmt_tx_channel_config_t::clk_src` and :cpp:member:`rmt_rx_channel_config_t::clk_src`. - ``rmt_set_rx_filter`` is removed. In the new driver, the filter threshold is redesigned into a new concept :cpp:member:`rmt_receive_config_t::signal_range_min_ns`. - ``rmt_set_idle_level`` and ``rmt_get_idle_level`` are removed. Setting IDLE level for TX channel is available in :cpp:member:`rmt_transmit_config_t::eot_level`. - ``rmt_set_rx_intr_en``, ``rmt_set_err_intr_en``, ``rmt_set_tx_intr_en``, ``rmt_set_tx_thr_intr_en`` and ``rmt_set_rx_thr_intr_en`` are removed. The new driver doesn't allow user to turn on/off interrupt from user space. Instead, it provides callback functions. - ``rmt_set_gpio`` and ``rmt_set_pin`` are removed. The new driver doesn't support to switch GPIO dynamically at runtime. - ``rmt_config`` is removed. In the new driver, basic configuration is done during the channel installation stage. - ``rmt_isr_register`` and ``rmt_isr_deregister`` are removed, the interrupt is allocated by the driver itself. - ``rmt_driver_install`` is replaced by :cpp:func:`rmt_new_tx_channel` and :cpp:func:`rmt_new_rx_channel`. - ``rmt_driver_uninstall`` is replaced by :cpp:func:`rmt_del_channel`. - ``rmt_fill_tx_items``, ``rmt_write_items`` and ``rmt_write_sample`` are removed. In the new driver, user needs to provide an encoder to "translate" the user data into RMT symbols. - ``rmt_get_counter_clock`` is removed, as the channel clock resolution is configured by user from :cpp:member:`rmt_tx_channel_config_t::resolution_hz`. - ``rmt_wait_tx_done`` is replaced by :cpp:func:`rmt_tx_wait_all_done`. - ``rmt_translator_init``, ``rmt_translator_set_context`` and ``rmt_translator_get_context`` are removed. In the new driver, the translator has been replaced by the RMT encoder. - ``rmt_get_ringbuf_handle`` is removed. The new driver doesn't use Ringbuffer to save RMT symbols. Instead, the incoming data are saved to the user provided buffer directly. The user buffer can even be mounted to DMA link internally. - ``rmt_register_tx_end_callback`` is replaced by :cpp:func:`rmt_tx_register_event_callbacks`, where user can register :cpp:member:`rmt_tx_event_callbacks_t::on_trans_done` event callback. - ``rmt_set_intr_enable_mask`` and ``rmt_clr_intr_enable_mask`` are removed, as the interrupt is handled by the driver, user doesn't need to take care of it. - ``rmt_add_channel_to_group`` and ``rmt_remove_channel_from_group`` are replaced by RMT sync manager. Please refer to :cpp:func:`rmt_new_sync_manager`. - ``rmt_set_tx_loop_count`` is removed. The loop count in the new driver is configured in :cpp:member:`rmt_transmit_config_t::loop_count`. - ``rmt_enable_tx_loop_autostop`` is removed. In the new driver, TX loop auto stop is always enabled if available, it's not configurable anymore. LCD --- - The LCD panel initialization flow is slightly changed. Now the :cpp:func:`esp_lcd_panel_init` won't turn on the display automatically. User needs to call :cpp:func:`esp_lcd_panel_disp_on_off` to manually turn on the display. Note, this is different from turning on backlight. With this breaking change, user can flush a predefined pattern to the screen before turning on the screen. This can help avoid random noise on the screen after a power on reset. - :cpp:func:`esp_lcd_panel_disp_off` is deprecated, please use :cpp:func:`esp_lcd_panel_disp_on_off` instead. .. only:: SOC_MCPWM_SUPPORTED MCPWM ----- - ``mcpwm_capture_enable`` is removed. To enable capture channel, please use :cpp:func:`mcpwm_capture_enable_channel`. - ``mcpwm_capture_disable`` is remove. To disable capture channel, please use :cpp:func:`mcpwm_capture_capture_disable_channel`. - ``mcpwm_sync_enable`` is removed. To configure synchronization, please use :cpp:func:`mcpwm_sync_configure`. - ``mcpwm_isr_register`` is removed. You can register event callbacks, for capture channels. e.g. :cpp:member:`mcpwm_capture_config_t::capture_cb`. - ``mcpwm_carrier_oneshot_mode_disable`` is removed. Disable the first pulse (a.k.a the one-shot pulse) in the carrier is not supported by hardware. .. only:: SOC_DEDICATED_GPIO_SUPPORTED Dedicated GPIO Driver --------------------- - All of the dedicated GPIO related LL functionsn in ``cpu_ll.h`` have been moved to ``dedic_gpio_cpu_ll.h`` and renamed.