/* * SPDX-FileCopyrightText: 2013-2024 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #include "sdkconfig.h" #include "string.h" #include "esp_attr.h" #include "esp_err.h" #include "esp_types.h" #include "esp_bit_defs.h" #include "esp_log.h" #include "../esp_psram_impl.h" #include "esp32c5/rom/spi_flash.h" #include "esp32c5/rom/opi_flash.h" #include "esp_rom_gpio.h" #include "esp_rom_efuse.h" #include "hal/gpio_hal.h" #include "esp_private/esp_gpio_reserve.h" #include "soc/spi1_mem_reg.h" #include "soc/spi_mem_reg.h" static const char* TAG = "quad_psram"; //Commands for PSRAM chip #define PSRAM_READ 0x03 #define PSRAM_FAST_READ 0x0B #define PSRAM_FAST_READ_QUAD 0xEB #define PSRAM_WRITE 0x02 #define PSRAM_QUAD_WRITE 0x38 #define PSRAM_ENTER_QMODE 0x35 #define PSRAM_EXIT_QMODE 0xF5 #define PSRAM_RESET_EN 0x66 #define PSRAM_RESET 0x99 #define PSRAM_SET_BURST_LEN 0xC0 #define PSRAM_DEVICE_ID 0x9F #define PSRAM_FAST_READ_DUMMY 4 #define PSRAM_FAST_READ_QUAD_DUMMY 6 // ID #define PSRAM_ID_KGD_M 0xff #define PSRAM_ID_KGD_S 8 #define PSRAM_ID_KGD 0x5d #define PSRAM_ID_EID_M 0xff #define PSRAM_ID_EID_S 16 // Use the [7:5](bit7~bit5) of EID to distinguish the psram size: // // BIT7 | BIT6 | BIT5 | SIZE(MBIT) // ------------------------------------- // 0 | 0 | 0 | 16 // 0 | 0 | 1 | 32 // 0 | 1 | 0 | 64 #define PSRAM_EID_SIZE_M 0x07 #define PSRAM_EID_SIZE_S 5 #define PSRAM_KGD(id) (((id) >> PSRAM_ID_KGD_S) & PSRAM_ID_KGD_M) #define PSRAM_EID(id) (((id) >> PSRAM_ID_EID_S) & PSRAM_ID_EID_M) #define PSRAM_SIZE_ID(id) ((PSRAM_EID(id) >> PSRAM_EID_SIZE_S) & PSRAM_EID_SIZE_M) #define PSRAM_IS_VALID(id) (PSRAM_KGD(id) == PSRAM_ID_KGD) #define PSRAM_IS_64MBIT_TRIAL(id) (PSRAM_EID(id) == 0x26) #define PSRAM_IS_2T_APS3204(id) ((((id) >> 21) && 0xfffff) == 1) // IO-pins for PSRAM. // WARNING: PSRAM shares all but the CS and CLK pins with the flash, so these defines // hardcode the flash pins as well, making this code incompatible with either a setup // that has the flash on non-standard pins or ESP32s with built-in flash. #define FLASH_CLK_IO SPI_CLK_GPIO_NUM #define FLASH_CS_IO SPI_CS0_GPIO_NUM // PSRAM clock and cs IO should be configured based on hardware design. #define PSRAM_CLK_IO SPI_CLK_GPIO_NUM #define PSRAM_CS_IO SPI_CS1_GPIO_NUM #define PSRAM_SPIQ_SD0_IO SPI_Q_GPIO_NUM #define PSRAM_SPID_SD1_IO SPI_D_GPIO_NUM #define PSRAM_SPIWP_SD3_IO SPI_WP_GPIO_NUM #define PSRAM_SPIHD_SD2_IO SPI_HD_GPIO_NUM #define CS_PSRAM_SEL SPI_MEM_CS1_DIS_M #define CS_FLASH_SEL SPI_MEM_CS0_DIS_M #define SPI1_NUM 1 #define SPI0_NUM 0 typedef enum { PSRAM_CMD_QPI, PSRAM_CMD_SPI, } psram_cmd_mode_t; typedef esp_rom_spi_cmd_t psram_cmd_t; static uint32_t s_psram_id = 0; static uint32_t s_psram_size = 0; //this stands for physical psram size in bytes static void config_psram_spi_phases(void); extern void esp_rom_spi_set_op_mode(int spi_num, esp_rom_spiflash_read_mode_t mode); static uint8_t s_psram_cs_io = (uint8_t) -1; uint8_t esp_psram_impl_get_cs_io(void) { return s_psram_cs_io; } static void psram_set_op_mode(int spi_num, psram_cmd_mode_t mode) { if (mode == PSRAM_CMD_QPI) { esp_rom_spi_set_op_mode(spi_num, ESP_ROM_SPIFLASH_QIO_MODE); SET_PERI_REG_MASK(SPI_MEM_CTRL_REG(spi_num), SPI_MEM_FCMD_QUAD_M); } else if (mode == PSRAM_CMD_SPI) { esp_rom_spi_set_op_mode(spi_num, ESP_ROM_SPIFLASH_SLOWRD_MODE); } } static void _psram_exec_cmd(int spi_num, uint32_t cmd, int cmd_bit_len, uint32_t addr, int addr_bit_len, int dummy_bits, uint8_t* mosi_data, int mosi_bit_len, uint8_t* miso_data, int miso_bit_len) { esp_rom_spi_cmd_t conf; uint32_t _addr = addr; conf.addr = &_addr; conf.addrBitLen = addr_bit_len; conf.cmd = cmd; conf.cmdBitLen = cmd_bit_len; conf.dummyBitLen = dummy_bits; conf.txData = (uint32_t*) mosi_data; conf.txDataBitLen = mosi_bit_len; conf.rxData = (uint32_t*) miso_data; conf.rxDataBitLen = miso_bit_len; esp_rom_spi_cmd_config(spi_num, &conf); } void psram_exec_cmd(int spi_num, psram_cmd_mode_t mode, uint32_t cmd, int cmd_bit_len, uint32_t addr, int addr_bit_len, int dummy_bits, uint8_t* mosi_data, int mosi_bit_len, uint8_t* miso_data, int miso_bit_len, uint32_t cs_mask, bool is_write_erase_operation) { uint32_t backup_usr = READ_PERI_REG(SPI_MEM_USER_REG(spi_num)); uint32_t backup_usr1 = READ_PERI_REG(SPI_MEM_USER1_REG(spi_num)); uint32_t backup_usr2 = READ_PERI_REG(SPI_MEM_USER2_REG(spi_num)); uint32_t backup_ctrl = READ_PERI_REG(SPI_MEM_CTRL_REG(spi_num)); psram_set_op_mode(spi_num, mode); _psram_exec_cmd(spi_num, cmd, cmd_bit_len, addr, addr_bit_len, dummy_bits, mosi_data, mosi_bit_len, miso_data, miso_bit_len); esp_rom_spi_cmd_start(spi_num, miso_data, miso_bit_len / 8, cs_mask, is_write_erase_operation); WRITE_PERI_REG(SPI_MEM_USER_REG(spi_num), backup_usr); WRITE_PERI_REG(SPI_MEM_USER1_REG(spi_num), backup_usr1); WRITE_PERI_REG(SPI_MEM_USER2_REG(spi_num), backup_usr2); WRITE_PERI_REG(SPI_MEM_CTRL_REG(spi_num), backup_ctrl); } //exit QPI mode(set back to SPI mode) static void psram_disable_qio_mode(int spi_num) { psram_exec_cmd(spi_num, PSRAM_CMD_QPI, PSRAM_EXIT_QMODE, 8, /* command and command bit len*/ 0, 0, /* address and address bit len*/ 0, /* dummy bit len */ NULL, 0, /* tx data and tx bit len*/ NULL, 0, /* rx data and rx bit len*/ CS_PSRAM_SEL, /* cs bit mask*/ false); /* whether is program/erase operation */ } //TODO IDF-4307 //switch psram burst length(32 bytes or 1024 bytes) //datasheet says it should be 1024 bytes by default static void psram_set_wrap_burst_length(int spi_num, psram_cmd_mode_t mode) { psram_exec_cmd(spi_num, mode, PSRAM_SET_BURST_LEN, 8, /* command and command bit len*/ 0, 0, /* address and address bit len*/ 0, /* dummy bit len */ NULL, 0, /* tx data and tx bit len*/ NULL, 0, /* rx data and rx bit len*/ CS_PSRAM_SEL, /* cs bit mask*/ false); /* whether is program/erase operation */ } //send reset command to psram, in spi mode static void psram_reset_mode(int spi_num) { psram_exec_cmd(spi_num, PSRAM_CMD_SPI, PSRAM_RESET_EN, 8, /* command and command bit len*/ 0, 0, /* address and address bit len*/ 0, /* dummy bit len */ NULL, 0, /* tx data and tx bit len*/ NULL, 0, /* rx data and rx bit len*/ CS_PSRAM_SEL, /* cs bit mask*/ false); /* whether is program/erase operation */ psram_exec_cmd(spi_num, PSRAM_CMD_SPI, PSRAM_RESET, 8, /* command and command bit len*/ 0, 0, /* address and address bit len*/ 0, /* dummy bit len */ NULL, 0, /* tx data and tx bit len*/ NULL, 0, /* rx data and rx bit len*/ CS_PSRAM_SEL, /* cs bit mask*/ false); /* whether is program/erase operation */ } esp_err_t psram_enable_wrap(uint32_t wrap_size) { //TODO: IDF-4307 static uint32_t current_wrap_size = 0; if (current_wrap_size == wrap_size) { return ESP_OK; } switch (wrap_size) { case 32: case 0: psram_set_wrap_burst_length(1, PSRAM_CMD_QPI); current_wrap_size = wrap_size; return ESP_OK; case 16: case 64: default: return ESP_FAIL; } } bool psram_support_wrap_size(uint32_t wrap_size) { switch (wrap_size) { case 0: case 32: return true; case 16: case 64: default: return false; } } //Read ID operation only supports SPI CMD and mode, should issue `psram_disable_qio_mode` before calling this static void psram_read_id(int spi_num, uint32_t* dev_id) { psram_exec_cmd(spi_num, PSRAM_CMD_SPI, PSRAM_DEVICE_ID, 8, /* command and command bit len*/ 0, 24, /* address and address bit len*/ 0, /* dummy bit len */ NULL, 0, /* tx data and tx bit len*/ (uint8_t*) dev_id, 24, /* rx data and rx bit len*/ CS_PSRAM_SEL, /* cs bit mask*/ false); /* whether is program/erase operation */ } //enter QPI mode static void psram_enable_qio_mode(int spi_num) { psram_exec_cmd(spi_num, PSRAM_CMD_SPI, PSRAM_ENTER_QMODE, 8, /* command and command bit len*/ 0, 0, /* address and address bit len*/ 0, /* dummy bit len */ NULL, 0, /* tx data and tx bit len*/ NULL, 0, /* rx data and rx bit len*/ CS_PSRAM_SEL, /* cs bit mask*/ false); /* whether is program/erase operation */ } static void psram_set_cs_timing(void) { //SPI0/1 share the cs_hold / cs_setup, cd_hold_time / cd_setup_time registers for PSRAM, so we only need to set SPI0 related registers here SET_PERI_REG_BITS(SPI_SMEM_AC_REG(0), SPI_SMEM_CS_HOLD_TIME_V, 3, SPI_SMEM_CS_HOLD_TIME_S); SET_PERI_REG_BITS(SPI_SMEM_AC_REG(0), SPI_SMEM_CS_SETUP_TIME_V, 3, SPI_SMEM_CS_SETUP_TIME_S); SET_PERI_REG_MASK(SPI_SMEM_AC_REG(0), SPI_SMEM_CS_HOLD_M | SPI_SMEM_CS_SETUP_M); SET_PERI_REG_BITS(SPI_SMEM_AC_REG(0), SPI_SMEM_CS_HOLD_DELAY_V, 3, SPI_SMEM_CS_HOLD_DELAY_S); } static void psram_gpio_config(void) { //CS1 uint8_t cs1_io = PSRAM_CS_IO; if (cs1_io == SPI_CS1_GPIO_NUM) { gpio_hal_iomux_func_sel(IO_MUX_GPIO15_REG, FUNC_SPICS1_SPICS1); } else { esp_rom_gpio_connect_out_signal(cs1_io, FSPICS1_OUT_IDX, 0, 0); gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[cs1_io], PIN_FUNC_GPIO); } s_psram_cs_io = cs1_io; //WP HD uint8_t wp_io = PSRAM_SPIWP_SD3_IO; //This ROM function will init both WP and HD pins. esp_rom_spiflash_select_qio_pins(wp_io, 0); // Reserve psram pins esp_gpio_reserve(BIT64(cs1_io) | BIT64(wp_io)); } esp_err_t esp_psram_impl_enable(void) //psram init { psram_gpio_config(); psram_set_cs_timing(); //We use SPI1 to init PSRAM psram_disable_qio_mode(SPI1_NUM); psram_read_id(SPI1_NUM, &s_psram_id); if (!PSRAM_IS_VALID(s_psram_id)) { /* 16Mbit psram ID read error workaround: * treat the first read id as a dummy one as the pre-condition, * Send Read ID command again */ psram_read_id(SPI1_NUM, &s_psram_id); if (!PSRAM_IS_VALID(s_psram_id)) { ESP_EARLY_LOGE(TAG, "PSRAM ID read error: 0x%08x, PSRAM chip not found or not supported, or wrong PSRAM line mode", (uint32_t)s_psram_id); return ESP_ERR_NOT_SUPPORTED; } } if (PSRAM_IS_64MBIT_TRIAL(s_psram_id)) { s_psram_size = PSRAM_SIZE_8MB; } else if (PSRAM_IS_2T_APS3204(s_psram_id)) { s_psram_size = PSRAM_SIZE_4MB; } else { uint8_t density = PSRAM_SIZE_ID(s_psram_id); s_psram_size = density == 0x0 ? PSRAM_SIZE_2MB : density == 0x1 ? PSRAM_SIZE_4MB : density == 0x2 ? PSRAM_SIZE_8MB : 0; } //SPI1: send psram reset command psram_reset_mode(SPI1_NUM); //SPI1: send QPI enable command psram_enable_qio_mode(SPI1_NUM); //Configure SPI0 PSRAM related SPI Phases config_psram_spi_phases(); return ESP_OK; } void IRAM_ATTR psram_clock_set(int spi_num, int8_t freqdiv) { uint32_t freqbits = 0; if (1 >= freqdiv) { WRITE_PERI_REG(SPI_MEM_SRAM_CLK_REG(spi_num), SPI_MEM_SCLK_EQU_SYSCLK); } else { freqbits = (((freqdiv - 1) << SPI_MEM_SCLKCNT_N_S)) | (((freqdiv / 2 - 1) << SPI_MEM_SCLKCNT_H_S)) | ((freqdiv - 1) << SPI_MEM_SCLKCNT_L_S); WRITE_PERI_REG(SPI_MEM_SRAM_CLK_REG(spi_num), freqbits); } } //Configure PSRAM SPI0 phase related registers here according to the PSRAM chip requirement static void config_psram_spi_phases(void) { #if (CONFIG_SPIRAM_SPEED == 80) psram_clock_set(0, 1); #elif (CONFIG_SPIRAM_SPEED == 40) psram_clock_set(0, 2); #endif //Config CMD phase CLEAR_PERI_REG_MASK(SPI_MEM_CACHE_SCTRL_REG(0), SPI_MEM_USR_SRAM_DIO_M); //disable dio mode for cache command SET_PERI_REG_MASK(SPI_MEM_CACHE_SCTRL_REG(0), SPI_MEM_USR_SRAM_QIO_M); //enable qio mode for cache command SET_PERI_REG_MASK(SPI_MEM_CACHE_SCTRL_REG(0), SPI_MEM_CACHE_SRAM_USR_RCMD_M); //enable cache read command SET_PERI_REG_MASK(SPI_MEM_CACHE_SCTRL_REG(0), SPI_MEM_CACHE_SRAM_USR_WCMD_M); //enable cache write command SET_PERI_REG_BITS(SPI_MEM_SRAM_DWR_CMD_REG(0), SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN, 7, SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN_S); SET_PERI_REG_BITS(SPI_MEM_SRAM_DWR_CMD_REG(0), SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE, PSRAM_QUAD_WRITE, SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE_S); //0x38 SET_PERI_REG_BITS(SPI_MEM_SRAM_DRD_CMD_REG(0), SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN_V, 7, SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN_S); SET_PERI_REG_BITS(SPI_MEM_SRAM_DRD_CMD_REG(0), SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE_V, PSRAM_FAST_READ_QUAD, SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE_S); //0xEB //Config ADDR phase SET_PERI_REG_BITS(SPI_MEM_CACHE_SCTRL_REG(0), SPI_MEM_SRAM_ADDR_BITLEN_V, 23, SPI_MEM_SRAM_ADDR_BITLEN_S); //Dummy /** * We set the PSRAM chip required dummy here. If timing tuning is needed, * the dummy length will be updated in `mspi_timing_enter_high_speed_mode()` */ SET_PERI_REG_MASK(SPI_MEM_CACHE_SCTRL_REG(0), SPI_MEM_USR_RD_SRAM_DUMMY_M); //enable cache read dummy SET_PERI_REG_BITS(SPI_MEM_CACHE_SCTRL_REG(0), SPI_MEM_SRAM_RDUMMY_CYCLELEN_V, (PSRAM_FAST_READ_QUAD_DUMMY - 1), SPI_MEM_SRAM_RDUMMY_CYCLELEN_S); //dummy CLEAR_PERI_REG_MASK(SPI_MEM_MISC_REG(0), SPI_MEM_CS1_DIS_M); //ENABLE SPI0 CS1 TO PSRAM(CS0--FLASH; CS1--SRAM) } /*--------------------------------------------------------------------------------- * Following APIs are not required to be IRAM-Safe * * Consider moving these to another file if this kind of APIs grows dramatically *-------------------------------------------------------------------------------*/ esp_err_t esp_psram_impl_get_physical_size(uint32_t *out_size_bytes) { if (!out_size_bytes) { return ESP_ERR_INVALID_ARG; } *out_size_bytes = s_psram_size; return (s_psram_size ? ESP_OK : ESP_ERR_INVALID_STATE); } esp_err_t esp_psram_impl_get_available_size(uint32_t *out_size_bytes) { if (!out_size_bytes) { return ESP_ERR_INVALID_ARG; } *out_size_bytes = s_psram_size; return (s_psram_size ? ESP_OK : ESP_ERR_INVALID_STATE); }