/******************************************************************************
 *
 *  Copyright (C) 2009-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/
#include <stdio.h>
#include <stdlib.h>

#include "bta/bta_api.h"
#include "bta/bta_sys.h"
#include "bta/bta_dm_co.h"
#include "bta/bta_dm_ci.h"
#include "btc/btc_dm.h"
#if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE)
#include "common/bt_defs.h"
#if (BTM_OOB_INCLUDED == TRUE)
#include "btif_dm.h"
#endif
#endif /* #if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE) */
#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
#include "common/bte_appl.h"

#define BTM_BLE_ONLY_ACCEPT_SPECIFIED_SEC_AUTH_DISABLE 0
#define BTM_BLE_ONLY_ACCEPT_SPECIFIED_SEC_AUTH_ENABLE  1

#define BTM_BLE_OOB_DISABLE  0
#define BTM_BLE_OOB_ENABLE   1

tBTE_APPL_CFG bte_appl_cfg = {
#if SMP_INCLUDED == TRUE
    BTA_LE_AUTH_REQ_SC_MITM_BOND, // Authentication requirements
#else
    BTM_AUTH_SPGB_YES,            // Authentication requirements
#endif
    BTM_LOCAL_IO_CAPS_BLE,
    BTM_BLE_INITIATOR_KEY_SIZE,
    BTM_BLE_RESPONDER_KEY_SIZE,
    BTM_BLE_MAX_KEY_SIZE,
    BTM_BLE_MIN_KEY_SIZE,
    BTM_BLE_ONLY_ACCEPT_SPECIFIED_SEC_AUTH_DISABLE,
    BTM_BLE_OOB_DISABLE,
};
#endif

#if (defined CLASSIC_BT_INCLUDED && CLASSIC_BT_INCLUDED == TRUE)
#include "btm_int.h"
#endif

/*******************************************************************************
**
** Function         bta_dm_co_get_compress_memory
**
** Description      This callout function is executed by DM to get memory for compression

** Parameters       id  -  BTA SYS ID
**                  memory_p - memory return by callout
**                  memory_size - memory size
**
** Returns          TRUE for success, FALSE for fail.
**
*******************************************************************************/
BOOLEAN bta_dm_co_get_compress_memory(tBTA_SYS_ID id, UINT8 **memory_p, UINT32 *memory_size)
{
    UNUSED(id);
    UNUSED(memory_p);
    UNUSED(memory_size);
    return TRUE;
}

/*******************************************************************************
**
** Function         bta_dm_co_bt_set_io_cap
**
** Description      This function is used to set IO capabilities
**
** Parameters       bt_io_cap  - IO capabilities
**
** @return          - ESP_BT_STATUS_SUCCESS : success
**                  - other  : failed
**
*******************************************************************************/
#if (CLASSIC_BT_INCLUDED == TRUE)
esp_err_t bta_dm_co_bt_set_io_cap(UINT8 bt_io_cap)
{
    esp_err_t ret = ESP_BT_STATUS_SUCCESS;

    if(bt_io_cap < BTM_IO_CAP_MAX ) {
        btm_cb.devcb.loc_io_caps = bt_io_cap;
        ret = ESP_BT_STATUS_SUCCESS;
    } else {
        ret = ESP_BT_STATUS_FAIL;
        APPL_TRACE_ERROR("%s error:Invalid io cap value.",__func__);
    }

    return ret;
}
#endif /* (CLASSIC_BT_INCLUDED == TRUE) */

/*******************************************************************************
**
** Function         bta_dm_co_io_req
**
** Description      This callout function is executed by DM to get IO capabilities
**                  of the local device for the Simple Pairing process
**
** Parameters       bd_addr  - The peer device
**                  *p_io_cap - The local Input/Output capabilities
**                  *p_oob_data - TRUE, if OOB data is available for the peer device.
**                  *p_auth_req - TRUE, if MITM protection is required.
**
** Returns          void.
**
*******************************************************************************/
void bta_dm_co_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, tBTA_OOB_DATA *p_oob_data,
                      tBTA_AUTH_REQ *p_auth_req, BOOLEAN is_orig)
{
    UNUSED(bd_addr);
#if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE)
#if (BTM_OOB_INCLUDED == TRUE)
    btif_dm_set_oob_for_io_req(p_oob_data);
#endif
    btif_dm_proc_io_req(bd_addr, p_io_cap, p_oob_data, p_auth_req, is_orig);
#else
    BTIF_TRACE_DEBUG("bta_dm_co_io_req: func not ported\n");
#endif /* #if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE) */
    BTIF_TRACE_DEBUG("bta_dm_co_io_req *p_oob_data = %d", *p_oob_data);
    BTIF_TRACE_DEBUG("bta_dm_co_io_req *p_io_cap = %d", *p_io_cap);
    BTIF_TRACE_DEBUG("bta_dm_co_io_req *p_auth_req = %d", *p_auth_req);
    BTIF_TRACE_DEBUG("bta_dm_co_io_req is_orig = %d", is_orig);
}

/*******************************************************************************
**
** Function         bta_dm_co_io_rsp
**
** Description      This callout function is executed by DM to report IO capabilities
**                  of the peer device for the Simple Pairing process
**
** Parameters       bd_addr  - The peer device
**                  io_cap - The remote Input/Output capabilities
**                  oob_data - TRUE, if OOB data is available for the peer device.
**                  auth_req - TRUE, if MITM protection is required.
**
** Returns          void.
**
*******************************************************************************/
void bta_dm_co_io_rsp(BD_ADDR bd_addr, tBTA_IO_CAP io_cap,
                      tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req)
{
#if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE)
    btif_dm_proc_io_rsp(bd_addr, io_cap, oob_data, auth_req);
#else
    BTIF_TRACE_DEBUG("bta_dm_co_io_rsp: func not ported\n");
#endif /* #if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE) */
}

/*******************************************************************************
**
** Function         bta_dm_co_lk_upgrade
**
** Description      This callout function is executed by DM to check if the
**                  platform wants allow link key upgrade
**
** Parameters       bd_addr  - The peer device
**                  *p_upgrade - TRUE, if link key upgrade is desired.
**
** Returns          void.
**
*******************************************************************************/
void  bta_dm_co_lk_upgrade(BD_ADDR bd_addr, BOOLEAN *p_upgrade )
{
    UNUSED(bd_addr);
    UNUSED(p_upgrade);
}

#if (BTM_OOB_INCLUDED == TRUE)
/*******************************************************************************
**
** Function         bta_dm_co_loc_oob
**
** Description      This callout function is executed by DM to report the OOB
**                  data of the local device for the Simple Pairing process
**
** Parameters       valid - TRUE, if the local OOB data is retrieved from LM
**                  c     - Simple Pairing Hash C
**                  r     - Simple Pairing Randomnizer R
**
** Returns          void.
**
*******************************************************************************/
void bta_dm_co_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r)
{
#if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE)
    BTIF_TRACE_DEBUG("bta_dm_co_loc_oob, valid = %d", valid);
#ifdef BTIF_DM_OOB_TEST
    btif_dm_proc_loc_oob(valid, c, r);
#endif
#else
    BTIF_TRACE_DEBUG("bta_dm_co_loc_oob: func not ported\n");
#endif /* #if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE) */
}

/*******************************************************************************
**
** Function         bta_dm_co_rmt_oob
**
** Description      This callout function is executed by DM to request the OOB
**                  data for the remote device for the Simple Pairing process
**                  Need to call bta_dm_ci_rmt_oob() in response
**
** Parameters       bd_addr  - The peer device
**
** Returns          void.
**
*******************************************************************************/
void bta_dm_co_rmt_oob(BD_ADDR bd_addr)
{
    BT_OCTET16 p_c = {0};
    BT_OCTET16 p_r = {0};
    BOOLEAN result = FALSE;

#ifdef BTIF_DM_OOB_TEST
#if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE)
    result = btif_dm_proc_rmt_oob(bd_addr, p_c, p_r);
#else
    BTIF_TRACE_DEBUG("bta_dm_rmt_oob: func not ported\n");
#endif /* #if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE) */
#endif

    BTIF_TRACE_DEBUG("bta_dm_co_rmt_oob: result=%d", result);
    bta_dm_ci_rmt_oob(result, bd_addr, p_c, p_r);
}

#endif /* BTM_OOB_INCLUDED */


// REMOVE FOR BLUEDROID ?

#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
/*******************************************************************************
**
** Function         bta_dm_co_le_io_key_req
**
** Description      This callout function is executed by DM to get BLE key information
**                  before SMP pairing gets going.
**
** Parameters       bd_addr  - The peer device
**                  *p_max_key_size - max key size local device supported.
**                  *p_init_key - initiator keys.
**                  *p_resp_key - responder keys.
**
** Returns          void.
**
*******************************************************************************/
void bta_dm_co_le_io_key_req(BD_ADDR bd_addr, UINT8 *p_max_key_size,
                             tBTA_LE_KEY_TYPE *p_init_key,
                             tBTA_LE_KEY_TYPE  *p_resp_key )
{
    UNUSED(bd_addr);
#if (SMP_INCLUDED == TRUE)
    BTIF_TRACE_DEBUG("##################################");
    BTIF_TRACE_DEBUG("bta_dm_co_le_io_key_req: only setting max size to 16");
    BTIF_TRACE_DEBUG("##################################");
    *p_max_key_size = 16;
    *p_init_key = *p_resp_key =
                      (BTA_LE_KEY_PENC | BTA_LE_KEY_PID | BTA_LE_KEY_PCSRK | BTA_LE_KEY_LENC | BTA_LE_KEY_LID | BTA_LE_KEY_LCSRK);
#endif  ///SMP_INCLUDED == TRUE
}


/*******************************************************************************
**
** Function         bta_dm_co_ble_local_key_reload
**
** Description      This callout function is to load the local BLE keys if available
**                  on the device.
**
** Parameters       none
**
** Returns          void.
**
*******************************************************************************/
void bta_dm_co_ble_load_local_keys(tBTA_DM_BLE_LOCAL_KEY_MASK *p_key_mask, BT_OCTET16 er,
                                   tBTA_BLE_LOCAL_ID_KEYS *p_id_keys)
{
#if (defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE)
    BTIF_TRACE_DEBUG("##################################");
    BTIF_TRACE_DEBUG("bta_dm_co_ble_load_local_keys:  Load local keys if any are persisted");
    BTIF_TRACE_DEBUG("##################################");
    btif_dm_get_ble_local_keys( p_key_mask, er, p_id_keys);
#endif  ///defined(BTIF_INCLUDED) && BTIF_INCLUDED == TRUE
#if (SMP_INCLUDED == TRUE)
    btc_dm_get_ble_local_keys( p_key_mask, er, p_id_keys);
#endif  ///SMP_INCLUDED == TRUE
}

/*******************************************************************************
**
** Function         bta_dm_co_ble_io_req
**
** Description      This callout function is executed by DM to get BLE IO capabilities
**                  before SMP pairing gets going.
**
** Parameters       bd_addr  - The peer device
**                  *p_io_cap - The local Input/Output capabilities
**                  *p_oob_data - TRUE, if OOB data is available for the peer device.
**                  *p_auth_req -  Auth request setting (Bonding and MITM required or not)
**                  *p_max_key_size - max key size local device supported.
**                  *p_init_key - initiator keys.
**                  *p_resp_key - responder keys.
**
** Returns          void.
**
*******************************************************************************/
void bta_dm_co_ble_io_req(BD_ADDR bd_addr,  tBTA_IO_CAP *p_io_cap,
                          tBTA_OOB_DATA *p_oob_data,
                          tBTA_LE_AUTH_REQ *p_auth_req,
                          UINT8 *p_max_key_size,
                          tBTA_LE_KEY_TYPE *p_init_key,
                          tBTA_LE_KEY_TYPE  *p_resp_key )
{
#if (SMP_INCLUDED == TRUE)
    UNUSED(bd_addr);
    /* if OOB is not supported, this call-out function does not need to do anything
     * otherwise, look for the OOB data associated with the address and set *p_oob_data accordingly
     * If the answer can not be obtained right away,
     * set *p_oob_data to BTA_OOB_UNKNOWN and call bta_dm_ci_io_req() when the answer is available */

    *p_oob_data = bte_appl_cfg.oob_support;

    /* *p_auth_req by default is FALSE for devices with NoInputNoOutput; TRUE for other devices. */

    *p_auth_req = bte_appl_cfg.ble_auth_req | (bte_appl_cfg.ble_auth_req & BTA_LE_AUTH_REQ_MITM) | ((*p_auth_req) & BTA_LE_AUTH_REQ_MITM);

    if (bte_appl_cfg.ble_io_cap <= 4) {
        *p_io_cap = bte_appl_cfg.ble_io_cap;
    }

    if (bte_appl_cfg.ble_init_key <= BTM_BLE_INITIATOR_KEY_SIZE) {
        *p_init_key = bte_appl_cfg.ble_init_key;
    }

    if (bte_appl_cfg.ble_resp_key <= BTM_BLE_RESPONDER_KEY_SIZE) {
        *p_resp_key = bte_appl_cfg.ble_resp_key;
    }

    if (bte_appl_cfg.ble_max_key_size > 7 && bte_appl_cfg.ble_max_key_size <= 16) {
        *p_max_key_size = bte_appl_cfg.ble_max_key_size;
    }
#endif  ///SMP_INCLUDED == TRUE
}

void bta_dm_co_ble_set_io_cap(UINT8 ble_io_cap)
{
#if (SMP_INCLUDED == TRUE)
    if(ble_io_cap < BTM_IO_CAP_MAX ) {
        bte_appl_cfg.ble_io_cap = ble_io_cap;
    } else {
        APPL_TRACE_ERROR("%s error:Invalid io cap value.",__func__);
    }
#endif  ///SMP_INCLUDED == TRUE
}

void bta_dm_co_ble_set_auth_req(UINT8 ble_auth_req)
{
#if (SMP_INCLUDED == TRUE)
    bte_appl_cfg.ble_auth_req = ble_auth_req;
#endif  ///SMP_INCLUDED == TRUE
}

void bta_dm_co_ble_set_init_key_req(UINT8 init_key)
{
#if (SMP_INCLUDED == TRUE)
   init_key &= 0x0f;  // 4~7bit reservd, only used the 0~3bit
   bte_appl_cfg.ble_init_key = init_key;
#endif  ///SMP_INCLUDED == TRUE
}

void bta_dm_co_ble_set_rsp_key_req(UINT8 rsp_key)
{
#if (SMP_INCLUDED == TRUE)
   rsp_key &= 0x0f;  // 4~7bit reservd, only used the 0~3bit
   bte_appl_cfg.ble_resp_key = rsp_key;
#endif  ///SMP_INCLUDED == TRUE
}

void bta_dm_co_ble_set_max_key_size(UINT8 ble_key_size)
{
#if (SMP_INCLUDED == TRUE)
    if(ble_key_size >= bte_appl_cfg.ble_min_key_size && ble_key_size <= BTM_BLE_MAX_KEY_SIZE) {
        bte_appl_cfg.ble_max_key_size = ble_key_size;
    } else {
        APPL_TRACE_ERROR("%s error:Invalid key size value, key_size =%d",__func__, ble_key_size);
    }
#endif  ///SMP_INCLUDED == TRUE
}

void bta_dm_co_ble_set_min_key_size(UINT8 ble_key_size)
{
#if (SMP_INCLUDED == TRUE)
    if(ble_key_size >= BTM_BLE_MIN_KEY_SIZE && ble_key_size <= bte_appl_cfg.ble_max_key_size) {
        bte_appl_cfg.ble_min_key_size = ble_key_size;
    } else {
        APPL_TRACE_ERROR("%s error:Invalid key size value, key_size =%d",__func__, ble_key_size);
    }
#endif  ///SMP_INCLUDED == TRUE
}

void bta_dm_co_ble_set_accept_auth_enable(UINT8 enable)
{
#if (SMP_INCLUDED == TRUE)
    if (enable) {
        enable = BTM_BLE_ONLY_ACCEPT_SPECIFIED_SEC_AUTH_ENABLE;
    }
    bte_appl_cfg.ble_accept_auth_enable = enable;
#endif  ///SMP_INCLUDED == TRUE
}

UINT8 bta_dm_co_ble_get_accept_auth_enable(void)
{
#if (SMP_INCLUDED == TRUE)
    return bte_appl_cfg.ble_accept_auth_enable;
#endif  ///SMP_INCLUDED == TRUE
    return 0;
}

UINT8 bta_dm_co_ble_get_auth_req(void)
{
#if (SMP_INCLUDED == TRUE)
    return bte_appl_cfg.ble_auth_req;
#endif  ///SMP_INCLUDED == TRUE
    return 0;
}

void bta_dm_co_ble_oob_support(UINT8 enable)
{
#if (SMP_INCLUDED == TRUE)
    if (enable) {
        bte_appl_cfg.oob_support = BTM_BLE_OOB_ENABLE;
    } else {
        bte_appl_cfg.oob_support = BTM_BLE_OOB_DISABLE;
    }
#endif  ///SMP_INCLUDED == TRUE
}

#endif