Merge 178cee5833 into 9b3eda0974

fix(esp_ringbuf): Fixed a bug where in a no-split buffer received items prematurely

Closes IDFGH-13694

See merge request espressif/esp-idf!33555

Kconfig

@@ -676,6 +676,5 @@ mainmenu "Espressif IoT Development Framework Configuration"
             - CONFIG_ESPTOOLPY_FLASHFREQ_120M && CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_DTR
             - CONFIG_SPIRAM_SPEED_120M && CONFIG_SPIRAM_MODE_OCT
             - CONFIG_BOOTLOADER_CACHE_32BIT_ADDR_QUAD_FLASH
-            - CONFIG_MBEDTLS_USE_CRYPTO_ROM_IMPL
             - CONFIG_ESP_WIFI_EAP_TLS1_3
             - CONFIG_ESP_WIFI_ENABLE_ROAMING_APP

components/bt/controller/lib_esp32c2/esp32c2-bt-lib

@@ -1 +1 @@
-Subproject commit e652624750341aca124e9f850e261b0c1ac63529
+Subproject commit e5c7ef0bf701d02c2203e26081fdd348d45935e5

components/bt/controller/lib_esp32c6/esp32c6-bt-lib

@@ -1 +1 @@
-Subproject commit 44e3d21b8f1b1802a6b5282fab5a1ec314d695a6
+Subproject commit 3f15aa1d602aedf510dd9c686b3f7e5ea8a44002

components/bt/controller/lib_esp32h2/esp32h2-bt-lib

@@ -1 +1 @@
-Subproject commit 58a293a2b4c305157723908ea29c2776f5803bbc
+Subproject commit 50f567fff506f63b4d06ebea80d0405fe9e39568

components/bt/porting/transport/driver/uart/hci_driver_uart.c

@@ -154,7 +154,7 @@ hci_driver_uart_deinit(void)
 
     ESP_ERROR_CHECK(uart_driver_delete(s_hci_driver_uart_env.hci_uart_params->hci_uart_port));
 
-    if (!s_hci_driver_uart_env.tx_sem) {
+    if (s_hci_driver_uart_env.tx_sem) {
         vSemaphoreDelete(s_hci_driver_uart_env.tx_sem);
     }
 

components/driver/test_apps/.build-test-rules.yml

@@ -86,10 +86,6 @@ components/driver/test_apps/touch_sensor_v2:
 components/driver/test_apps/twai:
   disable:
     - if: SOC_TWAI_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: test not pass, should be re-enable # TODO: IDF-8966
   depends_filepatterns:
     - components/driver/twai/**/*
   depends_components:

components/driver/test_apps/twai/main/test_twai_interactive.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -16,6 +16,9 @@
 #include "soc/soc_caps.h"
 #include "esp_log.h"
 
+#define TEST_TWAI_TX_PIN     4
+#define TEST_TWAI_RX_PIN     5
+
 #if CONFIG_TWAI_ISR_IN_IRAM
 static void IRAM_ATTR test_delay_post_cache_disable(void *args)
 {
@@ -27,7 +30,7 @@ TEST_CASE("twai_listen_only", "[twai]")
 {
     twai_timing_config_t t_config = TWAI_TIMING_CONFIG_250KBITS();
     twai_filter_config_t f_config = TWAI_FILTER_CONFIG_ACCEPT_ALL();
-    twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT(4, 5, TWAI_MODE_LISTEN_ONLY);
+    twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT(TEST_TWAI_TX_PIN, TEST_TWAI_RX_PIN, TWAI_MODE_LISTEN_ONLY);
 #if CONFIG_TWAI_ISR_IN_IRAM
     g_config.intr_flags |= ESP_INTR_FLAG_IRAM;
 #endif
@@ -60,8 +63,8 @@ TEST_CASE("twai_remote_request", "[twai]")
     twai_handle_t bus_handle;
     twai_timing_config_t t_config = TWAI_TIMING_CONFIG_250KBITS();
     twai_filter_config_t f_config = TWAI_FILTER_CONFIG_ACCEPT_ALL();
-    twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT(4, 5, TWAI_MODE_NORMAL);
-#if CONFIG_IDF_TARGET_ESP32C6
+    twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT(TEST_TWAI_TX_PIN, TEST_TWAI_RX_PIN, TWAI_MODE_NORMAL);
+#if CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32P4
     g_config.controller_id = 1;
 #endif
     TEST_ESP_OK(twai_driver_install_v2(&g_config, &t_config, &f_config, &bus_handle));

components/driver/test_apps/twai/main/test_twai_loop_back.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -99,25 +99,27 @@ TEST_CASE("twai_mode_ext_no_ack_250kbps", "[twai-loop-back]")
         .extd = true, // Extended Frame Format (29bit ID)
     };
 
-    printf("install twai driver\r\n");
     for (int i = 0; i < SOC_TWAI_CONTROLLER_NUM; i++) {
         g_config.controller_id = i;
         g_config.tx_io = i;
         g_config.rx_io = i;
+        printf("install twai driver %d\r\n", g_config.controller_id);
         TEST_ESP_OK(twai_driver_install_v2(&g_config, &t_config, &f_config, &twai_buses[i]));
         TEST_ESP_OK(twai_start_v2(twai_buses[i]));
     }
 
-    printf("transmit message\r\n");
     for (int i = 0; i < SOC_TWAI_CONTROLLER_NUM; i++) {
+        printf("transmit message from %d\r\n", i);
+        tx_msg.data[5] = SOC_TWAI_CONTROLLER_NUM - i;
         TEST_ESP_OK(twai_transmit_v2(twai_buses[i], &tx_msg, pdMS_TO_TICKS(1000)));
     }
 
-    printf("receive message\r\n");
     twai_message_t rx_msg;
     for (int i = 0; i < SOC_TWAI_CONTROLLER_NUM; i++) {
+        printf("receive message from %d\r\n", i);
         TEST_ESP_OK(twai_receive_v2(twai_buses[i], &rx_msg, pdMS_TO_TICKS(1000)));
         TEST_ASSERT_TRUE(rx_msg.data_length_code == 6);
+        tx_msg.data[5] = SOC_TWAI_CONTROLLER_NUM - i;
         for (int i = 0; i < 6; i++) {
             TEST_ASSERT_EQUAL(tx_msg.data[i], rx_msg.data[i]);
         }

components/driver/test_apps/twai/pytest_twai.py

@@ -1,12 +1,12 @@
 # SPDX-FileCopyrightText: 2021-2023 Espressif Systems (Shanghai) CO LTD
 # SPDX-License-Identifier: CC0-1.0
-
 import logging
 import subprocess
 from time import sleep
 
 import pytest
-from can import Bus, Message
+from can import Bus
+from can import Message
 from pytest_embedded import Dut
 
 
@@ -16,6 +16,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
 @pytest.mark.esp32s3
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',
@@ -46,6 +47,7 @@ def fixture_create_socket_can() -> Bus:
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
 @pytest.mark.esp32s3
+@pytest.mark.esp32p4
 @pytest.mark.twai_std
 @pytest.mark.parametrize(
     'config',
@@ -79,6 +81,7 @@ def test_twai_listen_only(dut: Dut, socket_can: Bus) -> None:
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
 @pytest.mark.esp32s3
+@pytest.mark.esp32p4
 @pytest.mark.twai_std
 @pytest.mark.parametrize(
     'config',

components/esp_ringbuf/ringbuf.c

@@ -506,6 +506,13 @@ static BaseType_t prvCheckItemAvail(Ringbuffer_t *pxRingbuffer)
         return pdFALSE;     //Byte buffers do not allow multiple retrievals before return
     }
     if ((pxRingbuffer->xItemsWaiting > 0) && ((pxRingbuffer->pucRead != pxRingbuffer->pucWrite) || (pxRingbuffer->uxRingbufferFlags & rbBUFFER_FULL_FLAG))) {
+        // If the ring buffer is a no-split buffer, the read pointer must point to an item that has been written to.
+        if ((pxRingbuffer->uxRingbufferFlags & (rbBYTE_BUFFER_FLAG | rbALLOW_SPLIT_FLAG)) == 0) {
+            ItemHeader_t *pxHeader = (ItemHeader_t *)pxRingbuffer->pucRead;
+            if ((pxHeader->uxItemFlags & rbITEM_WRITTEN_FLAG) == 0) {
+                return pdFALSE;
+            }
+        }
         return pdTRUE;      //Items/data available for retrieval
     } else {
         return pdFALSE;     //No items/data available for retrieval
@@ -979,9 +986,6 @@ BaseType_t xRingbufferSendAcquire(RingbufHandle_t xRingbuffer, void **ppvItem, s
     if (xItemSize > pxRingbuffer->xMaxItemSize) {
         return pdFALSE;     //Data will never ever fit in the queue.
     }
-    if ((pxRingbuffer->uxRingbufferFlags & rbBYTE_BUFFER_FLAG) && xItemSize == 0) {
-        return pdTRUE;      //Sending 0 bytes to byte buffer has no effect
-    }
 
     return prvSendAcquireGeneric(pxRingbuffer, NULL, ppvItem, xItemSize, xTicksToWait);
 }

components/esp_ringbuf/test_apps/main/test_ringbuf_common.c

@@ -723,6 +723,8 @@ size_t continuous_test_string_len(void)
     return sizeof(continuous_data);
 }
 
+#if !CONFIG_FREERTOS_UNICORE
+
 void send_to_buffer(RingbufHandle_t buffer, size_t max_item_size)
 {
     for (int iter = 0; iter < SMP_TEST_ITERATIONS; iter++) {
@@ -916,6 +918,8 @@ TEST_CASE("Test static ring buffer SMP", "[esp_ringbuf][linux]")
 }
 #endif
 
+#endif //!CONFIG_FREERTOS_UNICORE
+
 /* ------------------------ Test ring buffer 0 Item Size -----------------------
  * The following test case tests that sending/acquiring an item/bytes of 0 size
  * is permissible.
@@ -961,3 +965,80 @@ TEST_CASE("Test ringbuffer 0 item size", "[esp_ringbuf][linux]")
     vRingbufferDelete(allow_split_rb);
     vRingbufferDelete(byte_rb);
 }
+
+/* ---------------------------- Test no-split ring buffer SendAquire and SendComplete ---------------------------
+ * The following test case tests the SendAquire and SendComplete functions of the no-split ring buffer.
+ *
+ * The test case will do the following...
+ * 1) Create a no-split ring buffer.
+ * 2) Acquire space on the buffer to send an item.
+ * 3) Send the item to the buffer.
+ * 4) Verify that the item is received correctly.
+ * 5) Acquire space on the buffer until the buffer is full.
+ * 6) Send the items out-of-order to the buffer.
+ * 7) Verify that the items are not received until the first item is sent.
+ * 8) Send the first item.
+ * 9) Verify that the items are received in the correct order.
+ */
+TEST_CASE("Test no-split buffers always receive items in order", "[esp_ringbuf][linux]")
+{
+    // Create buffer
+    RingbufHandle_t buffer_handle = xRingbufferCreate(BUFFER_SIZE, RINGBUF_TYPE_NOSPLIT);
+    TEST_ASSERT_MESSAGE(buffer_handle != NULL, "Failed to create ring buffer");
+
+    // Acquire space on the buffer to send an item and write to the item
+    void *item1;
+    TEST_ASSERT_EQUAL(pdTRUE, xRingbufferSendAcquire(buffer_handle, &item1, MEDIUM_ITEM_SIZE, TIMEOUT_TICKS));
+    *(uint32_t *)item1 = 0x123;
+
+    // Send the item to the buffer
+    TEST_ASSERT_EQUAL(pdTRUE, xRingbufferSendComplete(buffer_handle, item1));
+
+    // Verify that the item is received correctly
+    size_t item_size;
+    uint32_t *received_item = xRingbufferReceive(buffer_handle, &item_size, TIMEOUT_TICKS);
+    TEST_ASSERT_NOT_NULL(received_item);
+    TEST_ASSERT_EQUAL(item_size, MEDIUM_ITEM_SIZE);
+    TEST_ASSERT_EQUAL(*(uint32_t *)received_item, 0x123);
+
+    // Return the space to the buffer after receiving the item
+    vRingbufferReturnItem(buffer_handle, received_item);
+
+    // At this point, the buffer should be empty
+    UBaseType_t items_waiting;
+    vRingbufferGetInfo(buffer_handle, NULL, NULL, NULL, NULL, &items_waiting);
+    TEST_ASSERT_MESSAGE(items_waiting == 0, "Incorrect items waiting");
+
+    // Acquire space on the buffer until the buffer is full
+#define MAX_NUM_ITEMS ( BUFFER_SIZE / ( MEDIUM_ITEM_SIZE + ITEM_HDR_SIZE ) )
+    void *items[MAX_NUM_ITEMS];
+    for (int i = 0; i < MAX_NUM_ITEMS; i++) {
+        TEST_ASSERT_EQUAL(pdTRUE, xRingbufferSendAcquire(buffer_handle, &items[i], MEDIUM_ITEM_SIZE, TIMEOUT_TICKS));
+        TEST_ASSERT_NOT_NULL(items[i]);
+        *(uint32_t *)items[i] = (0x100 + i);
+    }
+
+    // Verify that the buffer is full by attempting to acquire space for another item
+    void *another_item;
+    TEST_ASSERT_EQUAL(pdFALSE, xRingbufferSendAcquire(buffer_handle, &another_item, MEDIUM_ITEM_SIZE, TIMEOUT_TICKS));
+
+    // Send the items out-of-order to the buffer. Verify that the items are not received until the first item is sent.
+    // In this case, we send the items in the reverse order until the first item is sent.
+    for (int i = MAX_NUM_ITEMS - 1; i > 0; i--) {
+        TEST_ASSERT_EQUAL(pdTRUE, xRingbufferSendComplete(buffer_handle, items[i]));
+        TEST_ASSERT_NULL(xRingbufferReceive(buffer_handle, &item_size, 0));
+    }
+
+    // Send the first item
+    TEST_ASSERT_EQUAL(pdTRUE, xRingbufferSendComplete(buffer_handle, items[0]));
+
+    // Verify that the items are received in the correct order
+    for (int i = 0; i < MAX_NUM_ITEMS; i++) {
+        received_item = xRingbufferReceive(buffer_handle, &item_size, TIMEOUT_TICKS);
+        TEST_ASSERT_EQUAL(*(uint32_t *)received_item, (0x100 + i));
+        vRingbufferReturnItem(buffer_handle, received_item);
+    }
+
+    // Cleanup
+    vRingbufferDelete(buffer_handle);
+}

components/freertos/test_apps/freertos/pytest_freertos.py

@@ -5,20 +5,15 @@ from pytest_embedded import Dut
 
 
 CONFIGS = [
-    pytest.param('default', marks=[
-        pytest.mark.supported_targets,
-        pytest.mark.temp_skip_ci(targets=['esp32h2'], reason='test failed')
-    ]),
-    pytest.param('freertos_options', marks=[
-        pytest.mark.supported_targets,
-        pytest.mark.temp_skip_ci(targets=['esp32h2'], reason='test failed')]),
+    pytest.param('default', marks=[pytest.mark.supported_targets,]),
+    pytest.param('freertos_options', marks=[pytest.mark.supported_targets]),
     pytest.param('psram', marks=[pytest.mark.esp32]),
     pytest.param('single_core', marks=[pytest.mark.esp32, pytest.mark.esp32p4]),
     # TODO: [ESP32C5] IDF-10335
     # TODO: [ESP32C61] IDF-11146
     pytest.param('smp', marks=[
         pytest.mark.supported_targets,
-        pytest.mark.temp_skip_ci(targets=['esp32h2', 'esp32p4', 'esp32c5', 'esp32c61'],
+        pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5', 'esp32c61'],
                                  reason='test failed/TBD IDF-8113')
     ]),
 ]

components/mbedtls/Kconfig

@@ -1138,7 +1138,7 @@ menu "mbedTLS"
 
     config MBEDTLS_USE_CRYPTO_ROM_IMPL
         bool "Use ROM implementation of the crypto algorithm"
-        depends on ESP_ROM_HAS_MBEDTLS_CRYPTO_LIB && IDF_EXPERIMENTAL_FEATURES
+        depends on ESP_ROM_HAS_MBEDTLS_CRYPTO_LIB
         default "n"
         select MBEDTLS_SHA512_C
         select MBEDTLS_AES_C

components/mbedtls/test_apps/sdkconfig.ci.rom_impl

@@ -1,3 +1,2 @@
 CONFIG_IDF_TARGET="esp32c2"
-CONFIG_IDF_EXPERIMENTAL_FEATURES=y
 CONFIG_MBEDTLS_USE_CRYPTO_ROM_IMPL=y

components/pthread/include/esp_pthread.h

@@ -63,6 +63,7 @@ esp_pthread_cfg_t esp_pthread_get_default_config(void);
  * @return
  *      - ESP_OK if configuration was successfully set
  *      - ESP_ERR_NO_MEM if out of memory
+ *      - ESP_ERR_INVALID_ARG if cfg is NULL
  *      - ESP_ERR_INVALID_ARG if stack_size is less than PTHREAD_STACK_MIN
  *      - ESP_ERR_INVALID_ARG if stack_alloc_caps does not include MALLOC_CAP_8BIT
  */
@@ -79,6 +80,7 @@ esp_err_t esp_pthread_set_cfg(const esp_pthread_cfg_t *cfg);
  *
  * @return
  *      - ESP_OK if the configuration was available
+ *      - ESP_ERR_INVALID_ARG if p is NULL
  *      - ESP_ERR_NOT_FOUND if a configuration wasn't previously set
  */
 esp_err_t esp_pthread_get_cfg(esp_pthread_cfg_t *p);

components/pthread/port/linux/pthread.c

@@ -7,8 +7,25 @@
  * pthread port for Linux build
  */
 
+#include <pthread.h>
+#include <sys/param.h>
+#include "sdkconfig.h"
 #include "esp_pthread.h"
+#include "esp_heap_caps.h"
+
 #include <string.h>
+#include "freertos/FreeRTOS.h"
+
+static pthread_key_t s_pthread_cfg_key;
+static void esp_pthread_cfg_key_destructor(void *value)
+{
+    free(value);
+}
+
+static int get_default_pthread_core(void)
+{
+    return CONFIG_PTHREAD_TASK_CORE_DEFAULT == -1 ? tskNO_AFFINITY : CONFIG_PTHREAD_TASK_CORE_DEFAULT;
+}
 
 /**
  * @brief Creates a default pthread configuration based
@@ -24,8 +41,8 @@ esp_pthread_cfg_t esp_pthread_get_default_config(void)
         .prio = CONFIG_PTHREAD_TASK_PRIO_DEFAULT,
         .inherit_cfg = false,
         .thread_name = NULL,
-        .pin_to_core = 0,
-        .stack_alloc_caps = 0,
+        .pin_to_core = get_default_pthread_core(),
+        .stack_alloc_caps = MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT,
     };
 
     return cfg;
@@ -33,11 +50,63 @@ esp_pthread_cfg_t esp_pthread_get_default_config(void)
 
 esp_err_t esp_pthread_set_cfg(const esp_pthread_cfg_t *cfg)
 {
+    // Not checking the stack size here since PTHREAD_STACK_MIN has two conflicting declarations on Linux
+
+    if (cfg == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
+    // 0 is treated as default value, hence change caps to MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL in that case
+    int heap_caps;
+    if (cfg->stack_alloc_caps == 0) {
+        heap_caps = MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL;
+    } else {
+        // Check that memory is 8-bit capable
+        if (!(cfg->stack_alloc_caps & MALLOC_CAP_8BIT)) {
+            return ESP_ERR_INVALID_ARG;
+        }
+
+        heap_caps = cfg->stack_alloc_caps;
+    }
+
+    /* If a value is already set, update that value */
+    esp_pthread_cfg_t *p = pthread_getspecific(s_pthread_cfg_key);
+    if (!p) {
+        p = malloc(sizeof(esp_pthread_cfg_t));
+        if (!p) {
+            return ESP_ERR_NO_MEM;
+        }
+    }
+    *p = *cfg;
+    p->stack_alloc_caps = heap_caps;
+    p->stack_size = MAX(p->stack_size, 0x4000); // make sure Linux minimal stack size is respected
+
+    int __attribute((unused)) res = pthread_setspecific(s_pthread_cfg_key, p);
+
+    assert(res == 0);
+
     return ESP_OK;
 }
 
 esp_err_t esp_pthread_get_cfg(esp_pthread_cfg_t *p)
 {
+    if (p == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
+    esp_pthread_cfg_t *cfg = pthread_getspecific(s_pthread_cfg_key);
+    if (cfg) {
+        *p = *cfg;
+        return ESP_OK;
+    }
     memset(p, 0, sizeof(*p));
     return ESP_ERR_NOT_FOUND;
 }
+
+__attribute__((constructor)) esp_err_t esp_pthread_init(void)
+{
+    if (pthread_key_create(&s_pthread_cfg_key, esp_pthread_cfg_key_destructor) != 0) {
+        return ESP_ERR_NO_MEM;
+    }
+    return ESP_OK;
+}

components/pthread/pthread.c

@@ -142,6 +142,10 @@ static void pthread_delete(esp_pthread_t *pthread)
 /* Call this function to configure pthread stacks in Pthreads */
 esp_err_t esp_pthread_set_cfg(const esp_pthread_cfg_t *cfg)
 {
+    if (cfg == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
     if (cfg->stack_size < PTHREAD_STACK_MIN) {
         return ESP_ERR_INVALID_ARG;
     }
@@ -174,12 +178,16 @@ esp_err_t esp_pthread_set_cfg(const esp_pthread_cfg_t *cfg)
     p->stack_alloc_caps = heap_caps;
     pthread_setspecific(s_pthread_cfg_key, p);
 
-    return 0;
+    return ESP_OK;
     ESP_COMPILER_DIAGNOSTIC_POP("-Wanalyzer-malloc-leak")
 }
 
 esp_err_t esp_pthread_get_cfg(esp_pthread_cfg_t *p)
 {
+    if (p == NULL) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
     ESP_RETURN_ON_ERROR(lazy_init_pthread_cfg_key(), TAG, "Failed to initialize pthread key");
 
     esp_pthread_cfg_t *cfg = pthread_getspecific(s_pthread_cfg_key);

components/pthread/test_apps/.build-test-rules.yml

@@ -4,3 +4,7 @@ components/pthread/test_apps/pthread_psram_tests:
   enable:
     - if: IDF_TARGET in ["esp32"]
       reason: PSRAM only available on ESP32, S2, S3; code is fairly generic
+
+components/pthread/test_apps/pthread_unity_tests:
+  enable:
+    - if: IDF_TARGET in ["esp32", "esp32c2", "esp32c3", "esp32c5", "esp32c6", "esp32c61", "esp32h2", "esp32p4", "esp32s2", "esp32s3", "linux"]

components/pthread/test_apps/pthread_unity_tests/README.md

@@ -1,2 +1,2 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 | Linux |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | ----- |

components/pthread/test_apps/pthread_unity_tests/main/CMakeLists.txt

@@ -1,12 +1,19 @@
-set(sources "test_app_main.c"
-            "test_pthread.c"
-            "test_pthread_cond_var.c"
-            "test_pthread_local_storage.c"
-            "test_pthread_cxx.cpp"
-            "test_pthread_rwlock.c"
-            "test_pthread_semaphore.c")
+idf_build_get_property(target IDF_TARGET)
+
+set(sources "test_app_main.c" "test_esp_pthread.c")
+set(priv_requires "pthread" "unity")
+
+if(NOT ${target} STREQUAL "linux")
+    list(APPEND sources "test_pthread.c"
+                        "test_pthread_cond_var.c"
+                        "test_pthread_local_storage.c"
+                        "test_pthread_cxx.cpp"
+                        "test_pthread_rwlock.c"
+                        "test_pthread_semaphore.c")
+    list(APPEND priv_requires "esp_timer" "test_utils")
+endif()
 
 idf_component_register(SRCS ${sources}
                        INCLUDE_DIRS "."
-                       REQUIRES pthread esp_timer test_utils
+                       REQUIRES ${priv_requires}
                        WHOLE_ARCHIVE)

components/pthread/test_apps/pthread_unity_tests/main/test_app_main.c

@@ -1,44 +1,35 @@
 /*
- * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
+#include <stdio.h>
 #include <errno.h>
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "unity.h"
 #include "unity_test_runner.h"
-#include "esp_heap_caps.h"
+#include "unity_test_utils_memory.h"
 
 // Some resources are lazy allocated (e.g. newlib locks), the threshold is left for that case
 #define TEST_MEMORY_LEAK_THRESHOLD (-200)
 
-static size_t before_free_8bit;
-static size_t before_free_32bit;
-
-static void check_leak(size_t before_free, size_t after_free, const char *type)
-{
-    ssize_t delta = after_free - before_free;
-    printf("MALLOC_CAP_%s: Before %u bytes free, After %u bytes free (delta %d)\n", type, before_free, after_free, delta);
-    TEST_ASSERT_MESSAGE(delta >= TEST_MEMORY_LEAK_THRESHOLD, "memory leak");
-}
-
 void setUp(void)
 {
-    before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
-    before_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
+    unity_utils_set_leak_level(TEST_MEMORY_LEAK_THRESHOLD);
+    unity_utils_record_free_mem();
     errno = 0;
 }
 
 void tearDown(void)
 {
+#ifndef CONFIG_IDF_TARGET_LINUX // on Linux, we don't check for memory leaks with memory utils
     // Add a short delay of 200ms to allow the idle task to free remaining memory
     vTaskDelay(pdMS_TO_TICKS(200));
-    size_t after_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
-    size_t after_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
-    check_leak(before_free_8bit, after_free_8bit, "8BIT");
-    check_leak(before_free_32bit, after_free_32bit, "32BIT");
+#endif // CONFIG_IDF_TARGET_LINUX
+
+    unity_utils_evaluate_leaks();
 }
 
 void app_main(void)

components/pthread/test_apps/pthread_unity_tests/main/test_esp_pthread.c

@@ -0,0 +1,95 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Unlicense OR CC0-1.0
+ */
+
+#include <pthread.h>
+#include "sdkconfig.h"
+#include "esp_pthread.h"
+#include "esp_heap_caps.h"
+#include "unity.h"
+
+TEST_CASE("esp_pthread_get_default_config creates correct stack memory capabilities", "[cfg]")
+{
+    esp_pthread_cfg_t default_config = esp_pthread_get_default_config();
+
+    // The default must always be internal, 8-bit accessible RAM
+    TEST_ASSERT_EQUAL_HEX(MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL, default_config.stack_alloc_caps);
+}
+
+TEST_CASE("null pointers are rejected", "[cfg]")
+{
+    TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, esp_pthread_set_cfg(NULL));
+    TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, esp_pthread_get_cfg(NULL));
+}
+
+TEST_CASE("wrong heap caps are rejected", "[cfg]")
+{
+    esp_pthread_cfg_t default_config = esp_pthread_get_default_config();
+    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_set_cfg(&default_config)); // make sure we have saved a known value
+
+    // Test the rejection of wrong values
+    default_config.stack_alloc_caps = MALLOC_CAP_32BIT;
+    TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, esp_pthread_set_cfg(&default_config));
+
+    default_config.stack_alloc_caps = MALLOC_CAP_32BIT | MALLOC_CAP_INTERNAL;
+    TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, esp_pthread_set_cfg(&default_config));
+
+    // check that saved values are unaltered
+    esp_pthread_cfg_t retrieved_config;
+    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_get_cfg(&retrieved_config));
+    TEST_ASSERT_EQUAL_HEX(MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL, retrieved_config.stack_alloc_caps);
+}
+
+// On Linux, we silently adjust the stack size since pthread on Linux
+// requires a minimum stack size of 0x4000.
+#if !CONFIG_IDF_TARGET_LINUX
+TEST_CASE("invalid stack size is rejected", "[cfg]")
+{
+    esp_pthread_cfg_t default_config = esp_pthread_get_default_config();
+    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_set_cfg(&default_config)); // make sure we have saved a known value
+
+    // Test the rejection of wrong values
+    default_config.stack_size = PTHREAD_STACK_MIN - 1;
+    TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, esp_pthread_set_cfg(&default_config));
+
+    // check that saved values are unaltered
+    esp_pthread_cfg_t retrieved_config;
+    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_get_cfg(&retrieved_config));
+    TEST_ASSERT_EQUAL(CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT, retrieved_config.stack_size);
+}
+#endif // !CONFIG_IDF_TARGET_LINUX
+
+TEST_CASE("correct memory is accepted", "[cfg]")
+{
+    esp_pthread_cfg_t default_config = esp_pthread_get_default_config();
+
+    default_config.stack_alloc_caps = MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL;
+    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_set_cfg(&default_config));
+}
+
+TEST_CASE("configuration is preserved inside pthread", "[cfg]")
+{
+    esp_pthread_cfg_t saved_config;
+    esp_pthread_cfg_t retrieved_config;
+    saved_config.stack_size = PTHREAD_STACK_MIN;
+    saved_config.prio = 5;
+    saved_config.inherit_cfg = true;
+    saved_config.thread_name = "test_esp_pthread";
+    saved_config.pin_to_core = 0;
+    saved_config.stack_alloc_caps = MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL;
+
+    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_set_cfg(&saved_config));
+    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_get_cfg(&retrieved_config));
+
+    TEST_ASSERT_EQUAL(saved_config.stack_size, retrieved_config.stack_size);
+    TEST_ASSERT_EQUAL(saved_config.prio, retrieved_config.prio);
+    TEST_ASSERT_EQUAL(saved_config.inherit_cfg, retrieved_config.inherit_cfg);
+    TEST_ASSERT_EQUAL(saved_config.thread_name, retrieved_config.thread_name);
+    TEST_ASSERT_EQUAL(saved_config.pin_to_core, retrieved_config.pin_to_core);
+    TEST_ASSERT_EQUAL(saved_config.stack_alloc_caps, retrieved_config.stack_alloc_caps);
+
+    esp_pthread_cfg_t cfg = esp_pthread_get_default_config();
+    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_set_cfg(&cfg));
+}

components/pthread/test_apps/pthread_unity_tests/main/test_pthread.c

@@ -13,33 +13,6 @@
 
 #include "unity.h"
 
-TEST_CASE("esp_pthread_get_default_config creates correct stack memory capabilities", "[set_cfg]")
-{
-    esp_pthread_cfg_t default_config = esp_pthread_get_default_config();
-
-    // The default must always be internal, 8-bit accessible RAM
-    TEST_ASSERT_EQUAL_HEX(MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL, default_config.stack_alloc_caps);
-}
-
-TEST_CASE("wrong heap caps are rejected", "[set_cfg]")
-{
-    esp_pthread_cfg_t default_config = esp_pthread_get_default_config();
-
-    default_config.stack_alloc_caps = MALLOC_CAP_32BIT;
-    TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, esp_pthread_set_cfg(&default_config));
-
-    default_config.stack_alloc_caps = MALLOC_CAP_32BIT | MALLOC_CAP_INTERNAL;
-    TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, esp_pthread_set_cfg(&default_config));
-}
-
-TEST_CASE("correct memory is accepted", "[set_cfg]")
-{
-    esp_pthread_cfg_t default_config = esp_pthread_get_default_config();
-
-    default_config.stack_alloc_caps = MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL;
-    TEST_ASSERT_EQUAL(ESP_OK, esp_pthread_set_cfg(&default_config));
-}
-
 static void *compute_square(void *arg)
 {
     int *num = (int *) arg;

components/pthread/test_apps/pthread_unity_tests/pytest_pthread_unity_tests.py

@@ -62,3 +62,9 @@ def test_pthread_qemu(dut: Dut) -> None:
     for case in dut.test_menu:
         if 'qemu-ignore' not in case.groups and case.type == 'normal':
             dut._run_normal_case(case, timeout=75)
+
+
+@pytest.mark.linux
+@pytest.mark.host_test
+def test_pthread_linux(dut: Dut) -> None:
+    dut.run_all_single_board_cases(timeout=120)

docs/en/api-reference/peripherals/sdio_slave.rst

@@ -280,7 +280,7 @@ There are several ways to use the ``arg`` in the queue parameter:
 Application Example
 -------------------
 
-Slave/master communication: :example:`peripherals/sdio`.
+- :example:`peripherals/sdio/host` and :example:`peripherals/sdio/slave` demonstrate how to use a host to communicate with an ESP SDIO slave device.
 
 API Reference
 -------------

docs/zh_CN/api-reference/peripherals/sdio_slave.rst

@@ -278,9 +278,9 @@ SDIO 从机驱动程序的相关术语如下：
 
 
 应用示例
--------------------
+--------
 
-从机/主机通信的相关应用示例请参阅 :example:`peripherals/sdio`。
+- :example:`peripherals/sdio/host` 和 :example:`peripherals/sdio/slave` 演示了如何使用主机与 ESP SDIO 从机进行通信。
 
 API 参考
 -------------

examples/bluetooth/nimble/ble_multi_adv/main/main.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2017-2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -105,6 +105,8 @@ ble_multi_adv_set_addr(uint16_t instance)
         return rc;
     }
 
+    print_addr(addr.val);
+
     memcpy(&ble_instance_cb[instance].addr, &addr, sizeof(addr));
     return 0;
 }

examples/peripherals/camera/camera_dsi/README.md

@@ -6,7 +6,7 @@
 
 ## Overview
 
-This example demonstrates how to use the esp_driver_cam component to capture camera sensor signals and display it via DSI interface.
+This example demonstrates how to use the esp_driver_cam component to capture camera sensor signals and display it via DSI interface. This example will auto-detect camera sensors via [ESP camera sensor driver](https://components.espressif.com/components/espressif/esp_cam_sensor/versions/0.5.3) and capture camera sensor signals via CSI interface and display it via DSI interface.
 
 ## Usage
 
@@ -15,12 +15,19 @@ The subsections below give only absolutely necessary information. For full steps
 
 ### Hardware Required
 
-This example requires:
-
-- OV5647 camera sensor
-- ILI9881C LCD screen
+- OV5647 or SC2336 camera sensor, or other camera sensors
+- EK79007 or ILI9881C LCD screen
 - ESP32P4 devkit
 
+**Note:** OV5647 has its own ISP functions, whereas SC2336 is a camera sensor without ISP functions. You can use the ESP on-chip ISP functions to tune the image together with the sensor ISP functions, if the image quality is not as expected.
+
+**Note:** For EK79007 you will need to connect following pins:
+- 5V - 5V
+- GND - GND
+- RST_LCD - 3V3
+
+You can also connect camera sensors and LCD screens from other vendors to the ESP chip, you can find corresponding camera or LCD drivers from [ESP Component Registry](https://components.espressif.com), or design your own customized drivers.
+
 
                                    GND                                                                   GND
                 ┌────────────────────────────────────────────────┐             ┌─────────────────────────────────────────────────────────┐
@@ -40,7 +47,7 @@ This example requires:
     │                     ├──────────────────────┤                                                │      DSI DATA 1N          │                      │
     │                     │                      │                                                ├───────────────────────────┤                      │
     │                     │ CSI DATA 1N          │                  ESP32-P4                      │                           │                      │
-    │       OV5647        ├──────────────────────┤                                                │      DSI CLK N            │      ILI9881C        │
+    │       Camera        ├──────────────────────┤                                                │      DSI CLK N            │      LCD Screen      │
     │                     │                      │                                                ├───────────────────────────┤                      │
     │                     │ CSI CLK N            │                                                │                           │                      │
     │                     ├──────────────────────┤                                                │      DSI CLK P            │                      │
@@ -97,6 +104,7 @@ idf.py menuconfig
 
 ```
 Set CONFIG_CAMERA_OV5647 to y
+Set CONFIG_CAMERA_SC2336 to y
 ```
 
 

examples/peripherals/camera/camera_dsi/components/dsi_init/Kconfig.projbuild

@@ -1,25 +1,48 @@
 menu "Example DSI Configuration"
+
+    choice EXAMPLE_LCD_PATTERN
+        prompt "Select MIPI LCD model"
+        default EXAMPLE_LCD_PATTERN_EK79007
+        help
+            Select LCD controller model.
+
+        config EXAMPLE_LCD_PATTERN_EK79007
+            bool "EK79007"
+        config EXAMPLE_LCD_PATTERN_ILI9881C
+            bool "ILI9881C"
+    endchoice
+
     choice EXAMPLE_MIPI_DSI_DISP_HRES
         bool "Set MIPI CSI horizontal resolution"
+        default EXAMPLE_MIPI_DSI_DISP_HRES_800 if EXAMPLE_LCD_PATTERN_ILI9881C
+        default EXAMPLE_MIPI_DSI_DISP_HRES_1024 if EXAMPLE_LCD_PATTERN_EK79007
         default EXAMPLE_MIPI_DSI_DISP_HRES_800
 
         config EXAMPLE_MIPI_DSI_DISP_HRES_800
             bool "800"
+        config EXAMPLE_MIPI_DSI_DISP_HRES_1024
+            bool "1024"
     endchoice
 
     config EXAMPLE_MIPI_DSI_DISP_HRES
         int
         default 800 if EXAMPLE_MIPI_DSI_DISP_HRES_800
+        default 1024 if EXAMPLE_MIPI_DSI_DISP_HRES_1024
 
     choice EXAMPLE_MIPI_DSI_DISP_VRES
         bool "Set MIPI CSI vertical resolution"
+        default EXAMPLE_MIPI_DSI_DISP_VRES_1280 if EXAMPLE_LCD_PATTERN_ILI9881C
+        default EXAMPLE_MIPI_DSI_DISP_VRES_600 if EXAMPLE_LCD_PATTERN_EK79007
         default EXAMPLE_MIPI_DSI_DISP_VRES_1280
 
+        config EXAMPLE_MIPI_DSI_DISP_VRES_600
+            bool "600"
         config EXAMPLE_MIPI_DSI_DISP_VRES_1280
             bool "1280"
     endchoice
 
     config EXAMPLE_MIPI_DSI_DISP_VRES
         int
+        default 600 if EXAMPLE_MIPI_DSI_DISP_VRES_600
         default 1280 if EXAMPLE_MIPI_DSI_DISP_VRES_1280
 endmenu

examples/peripherals/camera/camera_dsi/components/dsi_init/example_dsi_init.c

@@ -10,10 +10,11 @@
 #include "esp_lcd_panel_ops.h"
 #include "esp_lcd_panel_io.h"
 #include "esp_lcd_ili9881c.h"
+#include "esp_lcd_ek79007.h"
 #include "example_dsi_init.h"
 #include "example_dsi_init_config.h"
 
-void example_dsi_resource_alloc(esp_lcd_panel_handle_t *ili9881c_ctrl_panel, esp_lcd_dsi_bus_handle_t *mipi_dsi_bus, esp_lcd_panel_io_handle_t *mipi_dbi_io, esp_lcd_panel_handle_t *mipi_dpi_panel, void **frame_buffer)
+void example_dsi_resource_alloc(esp_lcd_dsi_bus_handle_t *mipi_dsi_bus, esp_lcd_panel_io_handle_t *mipi_dbi_io, esp_lcd_panel_handle_t *mipi_dpi_panel, void **frame_buffer)
 {
     //---------------DSI resource allocation------------------//
     esp_lcd_dsi_bus_config_t bus_config = {
@@ -31,16 +32,9 @@ void example_dsi_resource_alloc(esp_lcd_panel_handle_t *ili9881c_ctrl_panel, esp
     };
     ESP_ERROR_CHECK(esp_lcd_new_panel_io_dbi(*mipi_dsi_bus, &dbi_config, mipi_dbi_io));
 
-    esp_lcd_panel_dev_config_t lcd_dev_config = {
-        .bits_per_pixel = 16,
-        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
-        .reset_gpio_num = -1,
-    };
-    ESP_ERROR_CHECK(esp_lcd_new_panel_ili9881c(*mipi_dbi_io, &lcd_dev_config, ili9881c_ctrl_panel));
-
     esp_lcd_dpi_panel_config_t dpi_config = {
         .dpi_clk_src = MIPI_DSI_DPI_CLK_SRC_DEFAULT,
-        .dpi_clock_freq_mhz = 80,
+        .dpi_clock_freq_mhz = EXAMPLE_MIPI_DSI_DPI_CLK_MHZ,
         .virtual_channel = 0,
         .pixel_format = LCD_COLOR_PIXEL_FORMAT_RGB565,
         .video_timing = {
@@ -54,17 +48,45 @@ void example_dsi_resource_alloc(esp_lcd_panel_handle_t *ili9881c_ctrl_panel, esp
             .vsync_front_porch = EXAMPLE_MIPI_DSI_IMAGE_VFP,
         },
     };
-    ESP_ERROR_CHECK(esp_lcd_new_panel_dpi(*mipi_dsi_bus, &dpi_config, mipi_dpi_panel));
+
+#if CONFIG_EXAMPLE_LCD_PATTERN_ILI9881C
+    ili9881c_vendor_config_t vendor_config = {
+        .mipi_config = {
+            .dsi_bus = *mipi_dsi_bus,
+            .dpi_config = &dpi_config,
+            .lane_num = 2,
+        },
+    };
+    esp_lcd_panel_dev_config_t lcd_dev_config = {
+        .reset_gpio_num = -1,
+        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
+        .bits_per_pixel = 16,
+        .vendor_config = &vendor_config,
+    };
+    ESP_ERROR_CHECK(esp_lcd_new_panel_ili9881c(*mipi_dbi_io, &lcd_dev_config, mipi_dpi_panel));
+#elif CONFIG_EXAMPLE_LCD_PATTERN_EK79007
+    ek79007_vendor_config_t vendor_config = {
+        .mipi_config = {
+            .dsi_bus = *mipi_dsi_bus,
+            .dpi_config = &dpi_config,
+        },
+    };
+    esp_lcd_panel_dev_config_t lcd_dev_config = {
+        .reset_gpio_num = -1,
+        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
+        .bits_per_pixel = 16,
+        .vendor_config = &vendor_config,
+    };
+    ESP_ERROR_CHECK(esp_lcd_new_panel_ek79007(*mipi_dbi_io, &lcd_dev_config, mipi_dpi_panel));
+#endif
+
     ESP_ERROR_CHECK(esp_lcd_dpi_panel_get_frame_buffer(*mipi_dpi_panel, 1, frame_buffer));
 }
 
-void example_dsi_ili9881c_panel_init(esp_lcd_panel_handle_t ili9881c_ctrl_panel)
+void example_dpi_panel_reset(esp_lcd_panel_handle_t mipi_dpi_panel)
 {
-    //---------------DSI Panel Init------------------//
-    ESP_ERROR_CHECK(esp_lcd_panel_reset(ili9881c_ctrl_panel));
-    ESP_ERROR_CHECK(esp_lcd_panel_init(ili9881c_ctrl_panel));
-    // turn on display
-    ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(ili9881c_ctrl_panel, true));
+    //---------------DPI Panel Reset------------------//
+    ESP_ERROR_CHECK(esp_lcd_panel_reset(mipi_dpi_panel));
 }
 
 void example_dpi_panel_init(esp_lcd_panel_handle_t mipi_dpi_panel)
@@ -73,10 +95,9 @@ void example_dpi_panel_init(esp_lcd_panel_handle_t mipi_dpi_panel)
     ESP_ERROR_CHECK(esp_lcd_panel_init(mipi_dpi_panel));
 }
 
-void example_dsi_resource_destroy(esp_lcd_panel_handle_t ili9881c_ctrl_panel, esp_lcd_dsi_bus_handle_t mipi_dsi_bus, esp_lcd_panel_io_handle_t mipi_dbi_io, esp_lcd_panel_handle_t mipi_dpi_panel)
+void example_dsi_resource_destroy(esp_lcd_dsi_bus_handle_t mipi_dsi_bus, esp_lcd_panel_io_handle_t mipi_dbi_io, esp_lcd_panel_handle_t mipi_dpi_panel)
 {
     ESP_ERROR_CHECK(esp_lcd_panel_del(mipi_dpi_panel));
-    ESP_ERROR_CHECK(esp_lcd_panel_del(ili9881c_ctrl_panel));
     ESP_ERROR_CHECK(esp_lcd_panel_io_del(mipi_dbi_io));
     ESP_ERROR_CHECK(esp_lcd_del_dsi_bus(mipi_dsi_bus));
 }

examples/peripherals/camera/camera_dsi/components/dsi_init/idf_component.yml

@@ -1,4 +1,5 @@
 dependencies:
-  esp_lcd_ili9881c: "~0.2.0"
+  esp_lcd_ili9881c: "^1.0.0"
+  esp_lcd_ek79007: "^1.0.0"
   idf:
     version: ">=5.3.0"

examples/peripherals/camera/camera_dsi/components/dsi_init/include/example_dsi_init.h

@@ -8,7 +8,6 @@
 
 #include "esp_lcd_mipi_dsi.h"
 #include "esp_lcd_panel_ops.h"
-#include "esp_lcd_ili9881c.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -17,20 +16,19 @@ extern "C" {
 /**
  * @brief DSI init function
  *
- * @param[out] ili9881c_ctrl_panel  ILI9881C panel handle
  * @param[out] mipi_dsi_bus         MIPI DSI bus handle
  * @param[out] mipi_dbi_io          MIPI DBI io handle
  * @param[out] mipi_dpi_panel       MIPI DPI panel handle
  * @param[out] frame_buffer         frame buffer
  */
-void example_dsi_resource_alloc(esp_lcd_panel_handle_t *ili9881c_ctrl_panel, esp_lcd_dsi_bus_handle_t *mipi_dsi_bus, esp_lcd_panel_io_handle_t *mipi_dbi_io, esp_lcd_panel_handle_t *mipi_dpi_panel, void **frame_buffer);
+void example_dsi_resource_alloc(esp_lcd_dsi_bus_handle_t *mipi_dsi_bus, esp_lcd_panel_io_handle_t *mipi_dbi_io, esp_lcd_panel_handle_t *mipi_dpi_panel, void **frame_buffer);
 
 /**
- * @brief DSI ILI9881C panel init function
+ * @brief DPI panel reset function
  *
- * @param[in] ili9881c_ctrl_panel ILI9881C panel handle
+ * @param[in] mipi_dpi_panel MIPI DPI panel handle
  */
-void example_dsi_ili9881c_panel_init(esp_lcd_panel_handle_t ili9881c_ctrl_panel);
+void example_dpi_panel_reset(esp_lcd_panel_handle_t mipi_dpi_panel);
 
 /**
  * @brief DPI panel init function
@@ -42,12 +40,11 @@ void example_dpi_panel_init(esp_lcd_panel_handle_t mipi_dpi_panel);
 /**
  * @brief Destroy DSI related resources
  *
- * @param[in] ili9881c_ctrl_panel  ILI9881C panel handle
  * @param[in] mipi_dsi_bus         MIPI DSI bus handle
  * @param[in] mipi_dbi_io          MIPI DBI io handle
  * @param[in] mipi_dpi_panel       MIPI DPI panel handle
  */
-void example_dsi_resource_destroy(esp_lcd_panel_handle_t ili9881c_ctrl_panel, esp_lcd_dsi_bus_handle_t mipi_dsi_bus, esp_lcd_panel_io_handle_t mipi_dbi_io, esp_lcd_panel_handle_t mipi_dpi_panel);
+void example_dsi_resource_destroy(esp_lcd_dsi_bus_handle_t mipi_dsi_bus, esp_lcd_panel_io_handle_t mipi_dbi_io, esp_lcd_panel_handle_t mipi_dpi_panel);
 
 #ifdef __cplusplus
 }

examples/peripherals/camera/camera_dsi/components/dsi_init/include/example_dsi_init_config.h

@@ -6,16 +6,31 @@
 
 #pragma once
 
+#include "sdkconfig.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-#define EXAMPLE_MIPI_DSI_IMAGE_HSYNC            40
-#define EXAMPLE_MIPI_DSI_IMAGE_HBP              140
-#define EXAMPLE_MIPI_DSI_IMAGE_HFP              40
-#define EXAMPLE_MIPI_DSI_IMAGE_VSYNC            4
-#define EXAMPLE_MIPI_DSI_IMAGE_VBP              16
-#define EXAMPLE_MIPI_DSI_IMAGE_VFP              16
+#if CONFIG_EXAMPLE_LCD_PATTERN_ILI9881C
+// FPS = 80000000/(40+140+40+800)/(4+16+16+1280) = 60Hz
+#define EXAMPLE_MIPI_DSI_DPI_CLK_MHZ              80
+#define EXAMPLE_MIPI_DSI_IMAGE_HSYNC              40
+#define EXAMPLE_MIPI_DSI_IMAGE_HBP                140
+#define EXAMPLE_MIPI_DSI_IMAGE_HFP                40
+#define EXAMPLE_MIPI_DSI_IMAGE_VSYNC              4
+#define EXAMPLE_MIPI_DSI_IMAGE_VBP                16
+#define EXAMPLE_MIPI_DSI_IMAGE_VFP                16
+#elif CONFIG_EXAMPLE_LCD_PATTERN_EK79007
+// FPS = 48000000/(10+120+120+1024)/(1+20+10+600) = 60Hz
+#define EXAMPLE_MIPI_DSI_DPI_CLK_MHZ              48
+#define EXAMPLE_MIPI_DSI_IMAGE_HSYNC              10
+#define EXAMPLE_MIPI_DSI_IMAGE_HBP                120
+#define EXAMPLE_MIPI_DSI_IMAGE_HFP                120
+#define EXAMPLE_MIPI_DSI_IMAGE_VSYNC              1
+#define EXAMPLE_MIPI_DSI_IMAGE_VBP                20
+#define EXAMPLE_MIPI_DSI_IMAGE_VFP                10
+#endif
 
 #ifdef __cplusplus
 }

examples/peripherals/camera/camera_dsi/components/sensor_init/CMakeLists.txt

@@ -0,0 +1,3 @@
+idf_component_register(SRCS "example_sensor_init.c"
+                       INCLUDE_DIRS "include"
+                       )

examples/peripherals/camera/camera_dsi/components/sensor_init/example_sensor_init.c

@@ -0,0 +1,102 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "sdkconfig.h"
+#include "esp_attr.h"
+#include "esp_log.h"
+#include "esp_err.h"
+#include "driver/i2c_master.h"
+#include "esp_sccb_intf.h"
+#include "esp_sccb_i2c.h"
+#include "esp_cam_sensor.h"
+#include "esp_cam_sensor_detect.h"
+#include "example_sensor_init.h"
+#include "example_sensor_init_config.h"
+
+static const char *TAG = "sensor_init";
+
+void example_sensor_init(int i2c_port, i2c_master_bus_handle_t *out_i2c_bus_handle)
+{
+    esp_err_t ret = ESP_FAIL;
+
+    //---------------I2C Init------------------//
+    i2c_master_bus_config_t i2c_bus_conf = {
+        .clk_source = I2C_CLK_SRC_DEFAULT,
+        .sda_io_num = EXAMPLE_CAM_SCCB_SDA_IO,
+        .scl_io_num = EXAMPLE_CAM_SCCB_SCL_IO,
+        .i2c_port = i2c_port,
+        .flags.enable_internal_pullup = true,
+    };
+    i2c_master_bus_handle_t i2c_bus_handle = NULL;
+    ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_conf, &i2c_bus_handle));
+
+    //---------------SCCB Init------------------//
+    esp_sccb_io_handle_t sccb_io_handle = NULL;
+    esp_cam_sensor_config_t cam_config = {
+        .sccb_handle = sccb_io_handle,
+        .reset_pin = -1,
+        .pwdn_pin = -1,
+        .xclk_pin = -1,
+        .sensor_port = ESP_CAM_SENSOR_MIPI_CSI,
+    };
+
+    esp_cam_sensor_device_t *cam = NULL;
+    for (esp_cam_sensor_detect_fn_t *p = &__esp_cam_sensor_detect_fn_array_start; p < &__esp_cam_sensor_detect_fn_array_end; ++p) {
+        sccb_i2c_config_t i2c_config = {
+            .scl_speed_hz = EXAMPLE_CAM_SCCB_FREQ,
+            .device_address = p->sccb_addr,
+            .dev_addr_length = I2C_ADDR_BIT_LEN_7,
+        };
+        ESP_ERROR_CHECK(sccb_new_i2c_io(i2c_bus_handle, &i2c_config, &cam_config.sccb_handle));
+
+        cam = (*(p->detect))(&cam_config);
+        if (cam) {
+            if (p->port != ESP_CAM_SENSOR_MIPI_CSI) {
+                ESP_LOGE(TAG, "detect a camera sensor with mismatched interface");
+                return;
+            }
+            break;
+        }
+        ESP_ERROR_CHECK(esp_sccb_del_i2c_io(cam_config.sccb_handle));
+    }
+
+    if (!cam) {
+        ESP_LOGE(TAG, "failed to detect camera sensor");
+        return;
+    }
+
+    esp_cam_sensor_format_array_t cam_fmt_array = {0};
+    esp_cam_sensor_query_format(cam, &cam_fmt_array);
+    const esp_cam_sensor_format_t *parray = cam_fmt_array.format_array;
+    for (int i = 0; i < cam_fmt_array.count; i++) {
+        ESP_LOGI(TAG, "fmt[%d].name:%s", i, parray[i].name);
+    }
+
+    esp_cam_sensor_format_t *cam_cur_fmt = NULL;
+    for (int i = 0; i < cam_fmt_array.count; i++) {
+        if (!strcmp(parray[i].name, EXAMPLE_CAM_FORMAT)) {
+            cam_cur_fmt = (esp_cam_sensor_format_t *) & (parray[i].name);
+        }
+    }
+
+    ret = esp_cam_sensor_set_format(cam, (const esp_cam_sensor_format_t *) cam_cur_fmt);
+    if (ret != ESP_OK) {
+        ESP_LOGE(TAG, "Format set fail");
+    } else {
+        ESP_LOGI(TAG, "Format in use:%s", cam_cur_fmt->name);
+    }
+    int enable_flag = 1;
+    // Set sensor output stream
+    ret = esp_cam_sensor_ioctl(cam, ESP_CAM_SENSOR_IOC_S_STREAM, &enable_flag);
+    if (ret != ESP_OK) {
+        ESP_LOGE(TAG, "Start stream fail");
+    }
+    ESP_ERROR_CHECK(ret);
+
+    *out_i2c_bus_handle = i2c_bus_handle;
+}

examples/peripherals/camera/camera_dsi/components/sensor_init/idf_component.yml

@@ -0,0 +1,4 @@
+dependencies:
+  espressif/esp_cam_sensor: "^0.5.1"
+  idf:
+    version: ">=5.3.0"

examples/peripherals/camera/camera_dsi/components/sensor_init/include/example_sensor_init.h

@@ -0,0 +1,25 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#pragma once
+
+#include "driver/i2c_master.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief SCCB Interface and Sensor Init
+ *
+ * @param[in]  i2c_port              I2C port
+ * @param[out] out_i2c_bus_handle    I2C bus handle
+ */
+void example_sensor_init(int i2c_port, i2c_master_bus_handle_t *out_i2c_bus_handle);
+
+#ifdef __cplusplus
+}
+#endif

examples/peripherals/camera/camera_dsi/components/sensor_init/include/example_sensor_init_config.h

@@ -0,0 +1,33 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#pragma once
+
+#include "sdkconfig.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define EXAMPLE_CAM_SCCB_FREQ                   (100000)
+#define EXAMPLE_CAM_SCCB_SCL_IO                 (8)
+#define EXAMPLE_CAM_SCCB_SDA_IO                 (7)
+
+#if CONFIG_EXAMPLE_MIPI_CSI_HRES_800
+#if CONFIG_EXAMPLE_MIPI_CSI_VRES_640
+#define EXAMPLE_CAM_FORMAT                     "MIPI_2lane_24Minput_RAW8_800x640_50fps"
+#else
+#define EXAMPLE_CAM_FORMAT                     "MIPI_2lane_24Minput_RAW8_800x1280_50fps"
+#endif
+#endif
+
+#if CONFIG_EXAMPLE_MIPI_CSI_HRES_1024
+#define EXAMPLE_CAM_FORMAT                     "MIPI_2lane_24Minput_RAW8_1024x600_30fps"
+#endif
+
+#ifdef __cplusplus
+}
+#endif

examples/peripherals/camera/camera_dsi/main/CMakeLists.txt

@@ -1,4 +1,4 @@
 idf_component_register(SRCS "camera_dsi_main.c"
                        INCLUDE_DIRS "."
-                       REQUIRES esp_mm esp_driver_isp esp_driver_cam esp_driver_i2c dsi_init
+                       REQUIRES esp_mm esp_driver_isp esp_driver_cam esp_driver_i2c dsi_init sensor_init
                        )

examples/peripherals/camera/camera_dsi/main/Kconfig.projbuild

@@ -14,20 +14,25 @@ menu "Example Configuration"
 
     choice EXAMPLE_MIPI_CSI_DISP_HRES
         bool "Set MIPI CSI horizontal resolution"
-        default EXAMPLE_MIPI_CSI_HRES_800
+        default EXAMPLE_MIPI_CSI_HRES_1024
 
         config EXAMPLE_MIPI_CSI_HRES_800
             bool "800"
+        config EXAMPLE_MIPI_CSI_HRES_1024
+            bool "1024"
     endchoice
 
     config EXAMPLE_MIPI_CSI_DISP_HRES
         int
         default 800 if EXAMPLE_MIPI_CSI_HRES_800
+        default 1024 if EXAMPLE_MIPI_CSI_HRES_1024
 
     choice EXAMPLE_MIPI_CSI_DISP_VRES
         bool "Set MIPI CSI vertical resolution"
-        default EXAMPLE_MIPI_CSI_VRES_640
+        default EXAMPLE_MIPI_CSI_VRES_600
 
+        config EXAMPLE_MIPI_CSI_VRES_600
+            bool "600"
         config EXAMPLE_MIPI_CSI_VRES_640
             bool "640"
         config EXAMPLE_MIPI_CSI_VRES_1280
@@ -36,6 +41,7 @@ menu "Example Configuration"
 
     config EXAMPLE_MIPI_CSI_DISP_VRES
         int
+        default 600 if EXAMPLE_MIPI_CSI_VRES_600
         default 640 if EXAMPLE_MIPI_CSI_VRES_640
         default 1280 if EXAMPLE_MIPI_CSI_VRES_1280
 endmenu

examples/peripherals/camera/camera_dsi/main/camera_dsi_main.c

@@ -6,24 +6,21 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include "sdkconfig.h"
 #include "esp_attr.h"
 #include "esp_log.h"
 #include "freertos/FreeRTOS.h"
 #include "esp_lcd_mipi_dsi.h"
 #include "esp_lcd_panel_ops.h"
-#include "esp_lcd_ili9881c.h"
 #include "esp_ldo_regulator.h"
 #include "esp_cache.h"
 #include "driver/i2c_master.h"
 #include "driver/isp.h"
 #include "esp_cam_ctlr_csi.h"
 #include "esp_cam_ctlr.h"
-#include "esp_sccb_intf.h"
-#include "esp_sccb_i2c.h"
-#include "esp_cam_sensor.h"
-#include "ov5647.h"
 #include "example_dsi_init.h"
 #include "example_dsi_init_config.h"
+#include "example_sensor_init.h"
 #include "example_config.h"
 
 static const char *TAG = "cam_dsi";
@@ -36,7 +33,6 @@ void app_main(void)
     esp_err_t ret = ESP_FAIL;
     esp_lcd_dsi_bus_handle_t mipi_dsi_bus = NULL;
     esp_lcd_panel_io_handle_t mipi_dbi_io = NULL;
-    esp_lcd_panel_handle_t ili9881c_ctrl_panel = NULL;
     esp_lcd_panel_handle_t mipi_dpi_panel = NULL;
     void *frame_buffer = NULL;
     size_t frame_buffer_size = 0;
@@ -55,7 +51,7 @@ void app_main(void)
      * ISP convert to RGB565
      */
     //---------------DSI Init------------------//
-    example_dsi_resource_alloc(&ili9881c_ctrl_panel, &mipi_dsi_bus, &mipi_dbi_io, &mipi_dpi_panel, &frame_buffer);
+    example_dsi_resource_alloc(&mipi_dsi_bus, &mipi_dbi_io, &mipi_dpi_panel, &frame_buffer);
 
     //---------------Necessary variable config------------------//
     frame_buffer_size = CONFIG_EXAMPLE_MIPI_CSI_DISP_HRES * CONFIG_EXAMPLE_MIPI_DSI_DISP_VRES * EXAMPLE_RGB565_BITS_PER_PIXEL / 8;
@@ -69,25 +65,9 @@ void app_main(void)
         .buflen = frame_buffer_size,
     };
 
-    //---------------I2C Init------------------//
-    i2c_master_bus_config_t i2c_bus_conf = {
-        .clk_source = I2C_CLK_SRC_DEFAULT,
-        .sda_io_num = EXAMPLE_MIPI_SCCB_SDA_IO,
-        .scl_io_num = EXAMPLE_MIPI_SCCB_SCL_IO,
-        .i2c_port = I2C_NUM_0,
-        .flags.enable_internal_pullup = true,
-    };
-    i2c_master_bus_handle_t bus_handle = NULL;
-    ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_conf, &bus_handle));
-
-    //---------------SCCB Init------------------//
-    esp_sccb_io_handle_t ov5647_io_handle = NULL;
-    sccb_i2c_config_t i2c_config = {
-        .scl_speed_hz = EXAMPLE_MIPI_SCCB_FREQ,
-        .device_address = EXAMPLE_OV5647_DEV_ADDR,
-        .dev_addr_length = I2C_ADDR_BIT_LEN_7,
-    };
-    ESP_ERROR_CHECK(sccb_new_i2c_io(bus_handle, &i2c_config, &ov5647_io_handle));
+    //--------Camera Sensor and SCCB Init-----------//
+    i2c_master_bus_handle_t i2c_bus_handle = NULL;
+    example_sensor_init(I2C_NUM_0, &i2c_bus_handle);
 
     //---------------CSI Init------------------//
     esp_cam_ctlr_csi_config_t csi_config = {
@@ -134,8 +114,8 @@ void app_main(void)
     ESP_ERROR_CHECK(esp_isp_new_processor(&isp_config, &isp_proc));
     ESP_ERROR_CHECK(esp_isp_enable(isp_proc));
 
-    //---------------DSI Panel Init------------------//
-    example_dsi_ili9881c_panel_init(ili9881c_ctrl_panel);
+    //---------------DPI Reset------------------//
+    example_dpi_panel_reset(mipi_dpi_panel);
 
     //init to all white
     memset(frame_buffer, 0xFF, frame_buffer_size);
@@ -146,53 +126,6 @@ void app_main(void)
         return;
     }
 
-    esp_cam_sensor_config_t cam_config = {
-        .sccb_handle = ov5647_io_handle,
-        .reset_pin = -1,
-        .pwdn_pin = -1,
-        .xclk_pin = -1,
-        .sensor_port = ESP_CAM_SENSOR_MIPI_CSI,
-    };
-
-    esp_cam_sensor_device_t *cam = ov5647_detect(&cam_config);
-    if (!cam) {
-        ESP_LOGE(TAG, "failed to detect 5647");
-        return;
-    }
-
-    esp_cam_sensor_format_array_t cam_fmt_array = {0};
-    esp_cam_sensor_query_format(cam, &cam_fmt_array);
-    const esp_cam_sensor_format_t *parray = cam_fmt_array.format_array;
-    for (int i = 0; i < cam_fmt_array.count; i++) {
-        ESP_LOGI(TAG, "fmt[%d].name:%s", i, parray[i].name);
-    }
-
-    esp_cam_sensor_format_t *cam_cur_fmt = NULL;
-    for (int i = 0; i < cam_fmt_array.count; i++) {
-#if CONFIG_EXAMPLE_MIPI_CSI_VRES_640
-        if (!strcmp(parray[i].name, "MIPI_2lane_24Minput_RAW8_800x640_50fps")) {
-            cam_cur_fmt = (esp_cam_sensor_format_t *) & (parray[i].name);
-        }
-#else
-        if (!strcmp(parray[i].name, "MIPI_2lane_24Minput_RAW8_800x1280_50fps")) {
-            cam_cur_fmt = (esp_cam_sensor_format_t *) & (parray[i].name);
-        }
-#endif
-    }
-
-    ret = esp_cam_sensor_set_format(cam, (const esp_cam_sensor_format_t *) cam_cur_fmt);
-    if (ret != ESP_OK) {
-        ESP_LOGE(TAG, "Format set fail");
-    } else {
-        ESP_LOGI(TAG, "Format in use:%s", cam_cur_fmt->name);
-    }
-    int enable_flag = 1;
-    // Set sensor output stream
-    ret = esp_cam_sensor_ioctl(cam, ESP_CAM_SENSOR_IOC_S_STREAM, &enable_flag);
-    if (ret != ESP_OK) {
-        ESP_LOGE(TAG, "Start stream fail");
-    }
-
     example_dpi_panel_init(mipi_dpi_panel);
 
     while (1) {

examples/peripherals/camera/camera_dsi/main/example_config.h

@@ -11,13 +11,9 @@ extern "C" {
 #endif
 
 #define EXAMPLE_RGB565_BITS_PER_PIXEL           16
-#define EXAMPLE_MIPI_SCCB_FREQ                  (100000)
-#define EXAMPLE_MIPI_SCCB_SCL_IO                (8)
-#define EXAMPLE_MIPI_SCCB_SDA_IO                (7)
 #define EXAMPLE_MIPI_IDI_CLOCK_RATE             (50000000)
 #define EXAMPLE_MIPI_CSI_LANE_BITRATE_MBPS      200 //line_rate = pclk * 4
 
-#define EXAMPLE_OV5647_DEV_ADDR                 0x36
 #ifdef __cplusplus
 }
 #endif

examples/peripherals/camera/camera_dsi/main/idf_component.yml

@@ -1,7 +1,7 @@
 dependencies:
-  espressif/esp_cam_sensor: "^0.5.1"
-  espressif/esp_lcd_ili9881c: "~0.2.0"
   idf:
     version: ">=5.3.0"
   dsi_init:
     path: ${IDF_PATH}/examples/peripherals/camera/camera_dsi/components/dsi_init
+  sensor_init:
+    path: ${IDF_PATH}/examples/peripherals/camera/camera_dsi/components/sensor_init

examples/peripherals/camera/camera_dsi/sdkconfig.defaults

@@ -1,4 +1,5 @@
 CONFIG_SPIRAM=y
 CONFIG_IDF_EXPERIMENTAL_FEATURES=y
 CONFIG_SPIRAM_SPEED_200M=y
+CONFIG_CAMERA_SC2336=y
 CONFIG_CAMERA_OV5647=y

examples/peripherals/isp/multi_pipelines/README.md

@@ -6,10 +6,14 @@
 
 ## Overview
 
-This example demonstrates how to use the ISP (image signal processor) to work with esp_driver_cam component. This example will capture camera sensor signals via CSI interface and display it via DSI interface. This example enables
+This example demonstrates how to use the ISP (image signal processor) to work with esp_driver_cam component. This example will auto-detect camera sensors via [ESP camera sensor driver](https://components.espressif.com/components/espressif/esp_cam_sensor/versions/0.5.3) and capture camera sensor signals via CSI interface and display it via DSI interface. This example enables following ISP functions:
+
 - ISP AF (auto-focus) feature
 - ISP BF (bayer denoise) feature
 - ISP Sharpen feature
+- ISP Demosaic feature
+- ISP GAMMA feature
+- ISP Color feature
 
 ## Usage
 
@@ -20,10 +24,18 @@ The subsections below give only absolutely necessary information. For full steps
 
 This example requires:
 
-- OV5647 camera sensor with VCM (Voice Coil Motor). The VCM used in this example is DW9714.
-- ILI9881C LCD screen
+- OV5647 or SC2336 camera sensor, or other camera sensors
+- EK79007 or ILI9881C LCD screen
 - ESP32P4 devkit
 
+**Note:** OV5647 has its own ISP functions, whereas SC2336 is a camera sensor without ISP functions. You can use the ESP on-chip ISP functions to tune the image together with the sensor ISP functions, if the image quality is not as expected.
+
+**Note:** For EK79007 you will need to connect following pins:
+- 5V - 5V
+- GND - GND
+- RST_LCD - 3V3
+
+You can also connect camera sensors and LCD screens from other vendors to the ESP chip, you can find corresponding camera or LCD drivers from [ESP Component Registry](https://components.espressif.com), or design your own customized drivers.
 
                                    GND                                                                   GND
                 ┌────────────────────────────────────────────────┐             ┌─────────────────────────────────────────────────────────┐
@@ -43,7 +55,7 @@ This example requires:
     │                     ├──────────────────────┤                                                │      DSI DATA 1N          │                      │
     │                     │                      │                                                ├───────────────────────────┤                      │
     │                     │ CSI DATA 1N          │                  ESP32-P4                      │                           │                      │
-    │       OV5647        ├──────────────────────┤                                                │      DSI CLK N            │      ILI9881C        │
+    │       Camera        ├──────────────────────┤                                                │      DSI CLK N            │      LCD Screen      │
     │                     │                      │                                                ├───────────────────────────┤                      │
     │                     │ CSI CLK N            │                                                │                           │                      │
     │                     ├──────────────────────┤                                                │      DSI CLK P            │                      │
@@ -100,6 +112,7 @@ idf.py menuconfig
 
 ```
 Set CONFIG_CAMERA_OV5647 to y
+Set CONFIG_CAMERA_SC2336 to y
 ```
 
 

examples/peripherals/isp/multi_pipelines/main/CMakeLists.txt

@@ -1,4 +1,4 @@
 idf_component_register(SRCS "isp_dsi_main.c"
                        INCLUDE_DIRS "."
-                       REQUIRES esp_mm esp_driver_isp esp_driver_cam esp_driver_i2c esp_lcd dsi_init
+                       REQUIRES esp_mm esp_driver_isp esp_driver_cam esp_driver_i2c esp_lcd dsi_init sensor_init
                        )

examples/peripherals/isp/multi_pipelines/main/Kconfig.projbuild

@@ -14,20 +14,25 @@ menu "Example Configuration"
 
     choice EXAMPLE_MIPI_CSI_DISP_HRES
         bool "Set MIPI CSI horizontal resolution"
-        default EXAMPLE_MIPI_CSI_HRES_800
+        default EXAMPLE_MIPI_CSI_HRES_1024
 
         config EXAMPLE_MIPI_CSI_HRES_800
             bool "800"
+        config EXAMPLE_MIPI_CSI_HRES_1024
+            bool "1024"
     endchoice
 
     config EXAMPLE_MIPI_CSI_DISP_HRES
         int
         default 800 if EXAMPLE_MIPI_CSI_HRES_800
+        default 1024 if EXAMPLE_MIPI_CSI_HRES_1024
 
     choice EXAMPLE_MIPI_CSI_DISP_VRES
         bool "Set MIPI CSI vertical resolution"
-        default EXAMPLE_MIPI_CSI_VRES_640
+        default EXAMPLE_MIPI_CSI_VRES_600
 
+        config EXAMPLE_MIPI_CSI_VRES_600
+            bool "600"
         config EXAMPLE_MIPI_CSI_VRES_640
             bool "640"
         config EXAMPLE_MIPI_CSI_VRES_1280
@@ -36,6 +41,7 @@ menu "Example Configuration"
 
     config EXAMPLE_MIPI_CSI_DISP_VRES
         int
+        default 600 if EXAMPLE_MIPI_CSI_VRES_600
         default 640 if EXAMPLE_MIPI_CSI_VRES_640
         default 1280 if EXAMPLE_MIPI_CSI_VRES_1280
 endmenu

examples/peripherals/isp/multi_pipelines/main/example_config.h

@@ -12,12 +12,8 @@ extern "C" {
 
 #define EXAMPLE_RGB565_BITS_PER_PIXEL           16
 #define EXAMPLE_MIPI_SCCB_FREQ                  (100000)
-#define EXAMPLE_MIPI_SCCB_SCL_IO                (8)
-#define EXAMPLE_MIPI_SCCB_SDA_IO                (7)
-#define EXAMPLE_MIPI_IDI_CLOCK_RATE             (50000000)
 #define EXAMPLE_MIPI_CSI_LANE_BITRATE_MBPS      200 //line_rate = pclk * 4
 
-#define EXAMPLE_OV5647_DEV_ADDR                 0x36
 #define EXAMPLE_DW9714_DEV_ADDR                 0xC
 #ifdef __cplusplus
 }

examples/peripherals/isp/multi_pipelines/main/idf_component.yml

@@ -1,9 +1,10 @@
 dependencies:
   espressif/esp_cam_sensor: "^0.5.*"
-  espressif/esp_lcd_ili9881c: "~0.2.0"
   idf:
     version: ">=5.3.0"
   isp_af_schemes:
     path: ${IDF_PATH}/examples/peripherals/isp/multi_pipelines/components/isp_af_schemes
   dsi_init:
     path: ${IDF_PATH}/examples/peripherals/camera/camera_dsi/components/dsi_init
+  sensor_init:
+    path: ${IDF_PATH}/examples/peripherals/camera/camera_dsi/components/sensor_init

examples/peripherals/isp/multi_pipelines/main/isp_dsi_main.c

@@ -7,12 +7,12 @@
 #include <stdlib.h>
 #include <string.h>
 #include <math.h>
+#include "sdkconfig.h"
 #include "freertos/FreeRTOS.h"
 #include "esp_log.h"
 #include "esp_heap_caps.h"
 #include "esp_lcd_mipi_dsi.h"
 #include "esp_lcd_panel_ops.h"
-#include "esp_lcd_ili9881c.h"
 #include "esp_ldo_regulator.h"
 #include "esp_cache.h"
 #include "driver/i2c_master.h"
@@ -23,9 +23,9 @@
 #include "esp_sccb_intf.h"
 #include "esp_sccb_i2c.h"
 #include "esp_cam_sensor.h"
-#include "ov5647.h"
 #include "example_dsi_init.h"
 #include "example_dsi_init_config.h"
+#include "example_sensor_init.h"
 #include "example_config.h"
 
 static const char *TAG = "isp_dsi";
@@ -190,7 +190,6 @@ void app_main(void)
     esp_err_t ret = ESP_FAIL;
     esp_lcd_dsi_bus_handle_t mipi_dsi_bus = NULL;
     esp_lcd_panel_io_handle_t mipi_dbi_io = NULL;
-    esp_lcd_panel_handle_t ili9881c_ctrl_panel = NULL;
     esp_lcd_panel_handle_t mipi_dpi_panel = NULL;
     void *frame_buffer = NULL;
     size_t frame_buffer_size = 0;
@@ -209,7 +208,7 @@ void app_main(void)
      * ISP convert to RGB565
      */
     //---------------DSI Init------------------//
-    example_dsi_resource_alloc(&ili9881c_ctrl_panel, &mipi_dsi_bus, &mipi_dbi_io, &mipi_dpi_panel, &frame_buffer);
+    example_dsi_resource_alloc(&mipi_dsi_bus, &mipi_dbi_io, &mipi_dpi_panel, &frame_buffer);
 
     //---------------Necessary variable config------------------//
     frame_buffer_size = CONFIG_EXAMPLE_MIPI_CSI_DISP_HRES * CONFIG_EXAMPLE_MIPI_DSI_DISP_VRES * EXAMPLE_RGB565_BITS_PER_PIXEL / 8;
@@ -223,29 +222,18 @@ void app_main(void)
         .buflen = frame_buffer_size,
     };
 
-    //---------------I2C Init------------------//
-    i2c_master_bus_config_t i2c_bus_conf = {
-        .clk_source = I2C_CLK_SRC_DEFAULT,
-        .sda_io_num = EXAMPLE_MIPI_SCCB_SDA_IO,
-        .scl_io_num = EXAMPLE_MIPI_SCCB_SCL_IO,
-        .i2c_port = I2C_NUM_0,
-        .flags.enable_internal_pullup = true,
-    };
-    i2c_master_bus_handle_t bus_handle = NULL;
-    ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_conf, &bus_handle));
+    //--------Camera Sensor and SCCB Init-----------//
+    i2c_master_bus_handle_t i2c_bus_handle = NULL;
+    example_sensor_init(I2C_NUM_0, &i2c_bus_handle);
 
-    //---------------SCCB Init------------------//
-    esp_sccb_io_handle_t ov5647_io_handle = NULL;
+    //---------------VCM SCCB Init------------------//
+    esp_sccb_io_handle_t dw9714_io_handle = NULL;
     sccb_i2c_config_t i2c_config = {
         .scl_speed_hz = EXAMPLE_MIPI_SCCB_FREQ,
-        .device_address = EXAMPLE_OV5647_DEV_ADDR,
+        .device_address = EXAMPLE_DW9714_DEV_ADDR,
         .dev_addr_length = I2C_ADDR_BIT_LEN_7,
     };
-    ESP_ERROR_CHECK(sccb_new_i2c_io(bus_handle, &i2c_config, &ov5647_io_handle));
-
-    esp_sccb_io_handle_t dw9714_io_handle = NULL;
-    i2c_config.device_address = EXAMPLE_DW9714_DEV_ADDR;
-    ESP_ERROR_CHECK(sccb_new_i2c_io(bus_handle, &i2c_config, &dw9714_io_handle));
+    ESP_ERROR_CHECK(sccb_new_i2c_io(i2c_bus_handle, &i2c_config, &dw9714_io_handle));
 
     //---------------CSI Init------------------//
     esp_cam_ctlr_csi_config_t csi_config = {
@@ -370,8 +358,8 @@ void app_main(void)
     };
     xTaskCreatePinnedToCore(af_task, "af_task", 8192, &af_task_param, 5, NULL, 0);
 
-    //---------------DSI Panel Init------------------//
-    example_dsi_ili9881c_panel_init(ili9881c_ctrl_panel);
+    //---------------DPI Reset------------------//
+    example_dpi_panel_reset(mipi_dpi_panel);
 
     //init to all white
     memset(frame_buffer, 0xFF, frame_buffer_size);
@@ -382,55 +370,6 @@ void app_main(void)
         return;
     }
 
-    esp_cam_sensor_config_t cam_config = {
-        .sccb_handle = ov5647_io_handle,
-        .reset_pin = -1,
-        .pwdn_pin = -1,
-        .xclk_pin = -1,
-        .sensor_port = ESP_CAM_SENSOR_MIPI_CSI,
-    };
-
-    esp_cam_sensor_device_t *cam = ov5647_detect(&cam_config);
-    if (!cam) {
-        ESP_LOGE(TAG, "failed to detect 5647");
-        return;
-    }
-
-    esp_cam_sensor_format_array_t cam_fmt_array = {0};
-    esp_cam_sensor_query_format(cam, &cam_fmt_array);
-    const esp_cam_sensor_format_t *parray = cam_fmt_array.format_array;
-    for (int i = 0; i < cam_fmt_array.count; i++) {
-        ESP_LOGI(TAG, "fmt[%d].name:%s", i, parray[i].name);
-    }
-
-    esp_cam_sensor_format_t *cam_cur_fmt = NULL;
-    for (int i = 0; i < cam_fmt_array.count; i++) {
-#if CONFIG_EXAMPLE_MIPI_CSI_VRES_640
-        if (!strcmp(parray[i].name, "MIPI_2lane_24Minput_RAW8_800x640_50fps")) {
-            cam_cur_fmt = (esp_cam_sensor_format_t *) & (parray[i].name);
-            break;
-        }
-#else
-        if (!strcmp(parray[i].name, "MIPI_2lane_24Minput_RAW8_800x1280_50fps")) {
-            cam_cur_fmt = (esp_cam_sensor_format_t *) & (parray[i].name);
-            break;
-        }
-#endif
-    }
-
-    ret = esp_cam_sensor_set_format(cam, (const esp_cam_sensor_format_t *) cam_cur_fmt);
-    if (ret != ESP_OK) {
-        ESP_LOGE(TAG, "Format set fail");
-    } else {
-        ESP_LOGI(TAG, "Format in use:%s", cam_cur_fmt->name);
-    }
-    int enable_flag = 1;
-    // Set sensor output stream
-    ret = esp_cam_sensor_ioctl(cam, ESP_CAM_SENSOR_IOC_S_STREAM, &enable_flag);
-    if (ret != ESP_OK) {
-        ESP_LOGE(TAG, "Start stream fail");
-    }
-
     example_dpi_panel_init(mipi_dpi_panel);
 
     while (1) {

examples/peripherals/isp/multi_pipelines/sdkconfig.defaults

@@ -1,4 +1,5 @@
 CONFIG_SPIRAM=y
 CONFIG_IDF_EXPERIMENTAL_FEATURES=y
 CONFIG_SPIRAM_SPEED_200M=y
+CONFIG_CAMERA_SC2336=y
 CONFIG_CAMERA_OV5647=y

examples/peripherals/ppa/ppa_dsi/README.md

@@ -19,9 +19,14 @@ The subsections below give only absolutely necessary information. For full steps
 
 This example requires:
 
-- ILI9881C LCD screen
+- EK79007 or ILI9881C LCD screen
 - ESP32P4 devkit
 
+**Note:** For EK79007 you will need to connect following pins:
+- 5V - 5V
+- GND - GND
+- RST_LCD - 3V3
+
 
                                                                   GND
                                         ┌─────────────────────────────────────────────────────────┐
@@ -41,7 +46,7 @@ This example requires:
           │                                                │      DSI DATA 1N          │                      │
           │                                                ├───────────────────────────┤                      │
           │                  ESP32-P4                      │                           │                      │
-          │                                                │      DSI CLK N            │      ILI9881C        │
+          │                                                │      DSI CLK N            │      LCD Screen      │
           │                                                ├───────────────────────────┤                      │
           │                                                │                           │                      │
           │                                                │      DSI CLK P            │                      │

examples/peripherals/ppa/ppa_dsi/main/idf_component.yml

@@ -1,5 +1,4 @@
 dependencies:
-  espressif/esp_lcd_ili9881c: "~0.2.0"
   idf:
     version: ">=5.3.0"
   dsi_init:

examples/peripherals/ppa/ppa_dsi/main/ppa_dsi_main.c

@@ -12,7 +12,6 @@
 #include "freertos/FreeRTOS.h"
 #include "esp_lcd_mipi_dsi.h"
 #include "esp_lcd_panel_ops.h"
-#include "esp_lcd_ili9881c.h"
 #include "esp_ldo_regulator.h"
 #include "driver/ppa.h"
 #include "example_dsi_init.h"
@@ -319,7 +318,6 @@ void app_main(void)
     uint16_t *pixels = NULL;
     esp_lcd_dsi_bus_handle_t mipi_dsi_bus = NULL;
     esp_lcd_panel_io_handle_t mipi_dbi_io = NULL;
-    esp_lcd_panel_handle_t ili9881c_ctrl_panel = NULL;
     esp_lcd_panel_handle_t mipi_dpi_panel = NULL;
 
     //---------------MIPI LDO Init------------------//
@@ -331,8 +329,8 @@ void app_main(void)
     ESP_ERROR_CHECK(esp_ldo_acquire_channel(&ldo_mipi_phy_config, &ldo_mipi_phy));
 
     //---------------DSI Init------------------//
-    example_dsi_resource_alloc(&ili9881c_ctrl_panel, &mipi_dsi_bus, &mipi_dbi_io, &mipi_dpi_panel, NULL);
-    example_dsi_ili9881c_panel_init(ili9881c_ctrl_panel);
+    example_dsi_resource_alloc(&mipi_dsi_bus, &mipi_dbi_io, &mipi_dpi_panel, NULL);
+    example_dpi_panel_reset(mipi_dpi_panel);
     example_dpi_panel_init(mipi_dpi_panel);
 
     //---------------Get Source image------------------//
@@ -400,5 +398,5 @@ void app_main(void)
     ESP_ERROR_CHECK(ppa_unregister_client(ppa_srm_handle));
     ESP_ERROR_CHECK(ppa_unregister_client(ppa_blend_handle));
     ESP_ERROR_CHECK(ppa_unregister_client(ppa_fill_handle));
-    example_dsi_resource_destroy(ili9881c_ctrl_panel, mipi_dsi_bus, mipi_dbi_io, mipi_dpi_panel);
+    example_dsi_resource_destroy(mipi_dsi_bus, mipi_dbi_io, mipi_dpi_panel);
 }

examples/phy/cert_test/README.md

@@ -13,7 +13,7 @@ Before project configuration and build, be sure to set the correct chip target u
 
 ### Hardware Required
 
-* A development board with ESP32-C3/ESP32-S3/ SoC.
+* A development board with ESP32/ESP32-C2/ESP32-C3/ESP32-C6/ESP32-H2/ESP32-S2/ESP32-S3/ SoC.
 * A USB cable for Power supply and programming
 
 ### Configure the project
@@ -34,11 +34,6 @@ Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
 
 (To exit the serial monitor, type ``Ctrl-]``.)
 
-See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.
-
-* [ESP-IDF Getting Started Guide on ESP32-C3](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html)
-* [ESP-IDF Getting Started Guide on ESP32-S3](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/get-started/index.html)
-
 ## Example Output
 
 The command and output logs for each test are as follows:

examples/phy/cert_test/main/cert_test.c

@@ -1,9 +1,10 @@
 /*
- * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
+#include "sdkconfig.h"
 #include "nvs_flash.h"
 
 #include "esp_console.h"
@@ -38,7 +39,7 @@ void app_main(void)
     register_phy_cmd();
 
     /* rftest.a requirements */
-#ifndef CONFIG_IDF_TARGET_ESP32H2
+#if CONFIG_SOC_WIFI_SUPPORTED
     esp_wifi_power_domain_on();
 #endif
 
@@ -46,12 +47,17 @@ void app_main(void)
     esp_phy_rftest_init();
 #endif
 
+    int help_index = 1;
     printf("\n ==================================================\n");
     printf(" |            RF certification test               |\n");
     printf(" |                                                |\n");
     printf(" |  1. Print 'help' to gain overview of commands  |\n");
-    printf(" |  2. Wi-Fi certification test                   |\n");
-    printf(" |  3. Bluetooth certification test               |\n");
+#if CONFIG_SOC_WIFI_SUPPORTED
+    printf(" |  %d. Wi-Fi certification test                   |\n", ++help_index);
+#endif
+#if CONFIG_SOC_BT_SUPPORTED
+    printf(" |  %d. Bluetooth certification test               |\n", ++help_index);
+#endif
     printf(" |                                                |\n");
     printf(" =================================================\n\n");
 

examples/phy/cert_test/main/cmd_phy.c

@@ -3,6 +3,8 @@
  *
  * SPDX-License-Identifier: Unlicense OR CC0-1.0
  */
+
+#include "sdkconfig.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "esp_log.h"