Commit Graph

59 Commits

Author SHA1 Message Date
David Cermak
41146d674f ci: Update pppos client test regex with esp-tls transport layer 2021-02-16 09:01:35 +01:00
Marius Vikhammer
04df1f3a42 CI: enable example builds for C3
Enables building C3 examples in CI.

Fixes related warnings/errors and disables examples that cannot run.
2021-02-09 12:04:02 +08:00
Fu Hanxi
0146f258d7 style: format python files with isort and double-quote-string-fixer 2021-01-26 10:49:01 +08:00
Liu Han
7f3bcc13d7 esp-modem: prefix the crash issue both bg96 and sim800l in OVERALL mode 2021-01-11 13:47:33 +00:00
Ash
935edc9e09 rename dce parameter
Merges https://github.com/espressif/esp-idf/pull/5750
Signed-off-by: Liu Han <liuhan@espressif.com>
2021-01-11 13:47:33 +00:00
Robert Nuttall
d59ffd9128 Expose get operator name command. Add get access tech
Signed-off-by: Liu Han <liuhan@espressif.com>
2021-01-11 13:47:33 +00:00
David Cermak
55d41c3377 esp_modem: Fixed race condition on exiting PPP mode
esp_modem_stop_ppp() stops both ppp netif and switches the modem back to
command mode. IF these two actions are not synchronised, we might
experience issues of
* active PPP session trying to send/receive uart-data
* command mode already active before modem switched to it
both resulting in crashes.
Fixed by introducing the transition mode and running these actions in sequence
* set esp-modem to transition mode
* enter command mode, wait for the reply or re-sync
* close the PPP netif
* wait until the netif closes
Other fixes include ignoring certain events if modem component not ready
or not in appropriate mode:
* ignoring all UART events comming from DTE with no DCE attached
* ignore pattern detection in PPP mode

Closes https://github.com/espressif/esp-idf/issues/6013
Closes https://github.com/espressif/esp-idf/issues/5737
Closes https://github.com/espressif/esp-idf/issues/6024
Closes https://github.com/espressif/esp-idf/issues/6058
Closes https://github.com/espressif/esp-idf/issues/5563
Closes https://github.com/espressif/esp-idf/issues/5695
Closes https://github.com/espressif/esp-idf/issues/5633
Closes https://github.com/espressif/esp-idf/issues/4482
Related https://github.com/espressif/esp-idf/pull/4849
Related https://github.com/espressif/esp-idf/pull/4653
2020-12-21 16:38:20 +01:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
David Cermak
8a143fcf40 esp-netif: Fix PPP netif event posting to include esp_netif data
Closes https://github.com/espressif/esp-idf/issues/6009
2020-10-26 16:00:42 +00:00
David Cermak
6f1b8fe062 esp-modem: Remove esp-netif destroy from modem network glue code
To be in line with other interfaces, when deleting the driver and it's glue layer to esp-netif, we DO NOT delete the related esp-netif (since is was allocated and created outside of the glue code and it works the same way in esp-eth and esp-wifi driver/glue layers).

Closes https://github.com/espressif/esp-idf/issues/5486
2020-08-31 06:47:01 +00:00
ryan
266be00254 esp-netif: Added esp_netif slip support, slip_modem component and example
Merges https://github.com/espressif/esp-idf/pull/4985
2020-07-15 15:46:46 +02:00
David Cermak
c226270138 pppos-client: support for SIM7600 modem
Reuses most of the code from BG96. At this moment, this is not a
perfect support for other modules as the generic handlers for most
common modem functionality is not easily reusable. Refactoring to a
fully independent modem component will solve this.

Closes https://github.com/espressif/esp-idf/issues/5250
2020-07-13 14:45:19 +00:00
Marius Vikhammer
a80cff924b docs: fix broken links in example READMEs 2020-07-08 10:39:33 +08:00
David Cermak
8f0ec8bd50 pppos client: modem netif fix ignoring potential modem-start error
esp-modem netif glue layer implements esp-netif attach callback to setup corresponding driver functions and start the modem. The error code of esp_modem_start_ppp() was ignored and ESP_OK returned in all cases. Fixed by passing esp_modem_start_ppp()'s error code to post_attach callback.

Closes https://github.com/espressif/esp-idf/issues/5430
2020-06-18 16:20:50 +02:00
morris
0fcb447707 add pppos client restart in example
Closes https://github.com/espressif/esp-idf/issues/4268
2020-05-29 13:09:53 +08:00
morris
6d70b7c352 fix esp_modem switch mode timeout
Closes https://github.com/espressif/esp-idf/issues/3506
Closes https://github.com/espressif/esp-idf/issues/4324
2020-05-29 13:03:15 +08:00
Roland Dobai
5f024e1cd4 Add protocol example tests 2020-05-19 12:17:32 +02:00
Axel Lin
85e9930071 esp_modem: Fix misuse event_queue_size as pattern_queue_size
Also remove event_queue_size from esp_modem_dte_t because
event_queue_size is only used in esp_modem_dte_init.

Fixes: 817c0e3019 ("esp_modem: UART runtime configuration of esp-modem")
Signed-off-by: Axel Lin <axel.lin@gmail.com>
2020-04-25 08:08:01 +08:00
David Cermak
6aabfd50d5 pppos_client: support for PPPAUTHTYPE_NONE
Closes https://github.com/espressif/esp-idf/issues/4616
Closes WIFI-1652
2020-04-14 21:46:07 +02:00
David Cermak
817c0e3019 esp_modem: UART runtime configuration of esp-modem
Basic set of configuration related to UART moved from KConfig
to runtime configuration structure to simplify reusing the component for
testing and examples.
2020-04-14 21:46:07 +02:00
Axel Lin
0784426d6b esp_modem: Ensure uart_param_config and uart pins are set before uart_driver_install
Fixes Guru Meditation Error: Core 0 panic'ed (LoadProhibited) when config with
CONFIG_PM_ENABLE=y && CONFIG_PM_DFS_INIT_AUTO=y.

Signed-off-by: Axel Lin <axel.lin@gmail.com>

Merges https://github.com/espressif/esp-idf/pull/4904
2020-04-14 21:46:07 +02:00
David Cermak
636621d1c5 pppos_client: Add a test application for pppos_client
Adding testing facilities for pppos-client including esp-modem component
and PPP client in lwip. Testing is provided with PPP server running on
rpi.
2020-04-14 21:46:07 +02:00
David Cermak
745f062e07 esp_modem: pppos_client modem to use uart with REF_TICK
pppos_client example used the UART default clock configuration which might
cause issues if power management enabled. Settings updated to UART_SCLK_REF_TICK
Also need to explicitly disable RX interrupts in UART pattern detection
mode.

Closes https://github.com/espressif/esp-idf/issues/4801
2020-04-14 21:46:07 +02:00
David Cermak
fffdc1d789 esp-netif-ppp: support for setting ppp netif up and down
calling esp_netif_up() and esp_netif_down() was not supported if the
underlying netif wos of ppp type. Updated the code to enable setting
these interfaces up/down and registered actions in moden_netif glue for
connection/disconnection events to set the netif up/down.
2020-03-19 13:16:24 +00:00
David Cermak
eae8eaa55f esp-netif-ppp: support for posting GOT_IP event for IPv6 2020-03-05 18:46:48 +00:00
Francesco Giancane
afd6d6294e examples: pppos_client: update sdkconfig.defaults
As per discussion in #4782, IPV6 link local negotiation by default is
disabled.

Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
2020-03-05 18:46:48 +00:00
morris
237f6448d3 resume pppos example on esp32s2 2020-02-24 12:02:18 +08:00
Francesco Giancane
d8755fff3f esp_modem.c: post PPP stop event when requested
When library users call esp_stop_ppp(), it is expected that the PPP link
is closed and the DCE is moved into command mode.

If the STOP event is not posted into the event loop, then the PPP stack
would not be turned off, resulting in the impossibility to switch into
command mode, as the modem is still sending PPP binary data.

Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>

Merges https://github.com/espressif/esp-idf/pull/4642
2020-02-10 09:49:27 +00:00
David Cermak
7d45bfda21 esp_netif_lwip_ppp: fix posting ip-event data
Closes https://github.com/espressif/esp-idf/issues/4634
2020-01-31 15:21:30 +01:00
Axel Lin
fdda7b3bdf pppos_client: Fix power_down dce immediately after got IP
This was accidently commited bug when convert to use esp-netif, fix it.

Fixes: 25913af2cc ("pppos_client: udated example code to use esp-netif in PPP configuration")
Signed-off-by: Axel Lin <axel.lin@gmail.com>

Merges https://github.com/espressif/esp-idf/pull/4618
2020-01-17 07:38:15 +01:00
David Cermak
31b2702387 esp_netif, examples: esp_netif_init() moved into ESP_ERROR_CHECK()
esp_netif_init() returns standard esp_err_t error code (unlike tcpip_adapter init), so shall be checked for the return value
Also to make the initialization code more consistent.
2019-12-17 09:07:49 +01:00
David Cermak
04a25394aa esp_modem: add simple compatibility layer for new esp_modem connecting over esp-netif 2019-12-16 17:34:10 +00:00
David Cermak
25913af2cc pppos_client: udated example code to use esp-netif in PPP configuration 2019-12-16 17:34:10 +00:00
houwenxiang
f27ae9b0e2 feature: Add uart hal support. 2019-11-26 20:01:50 +08:00
David Cermak
3a19bf055d esp_netif and examples: using wifi driver handle, update examples and tests to pass the CI 2019-11-13 12:36:25 +01:00
David Cermak
b834c99148 examples: modify other examples and tests to use esp_netif instead of tcpip_adapter 2019-11-13 12:36:25 +01:00
Angus Gratton
8675a818f9 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-22 13:51:49 +11:00
Marius Vikhammer
c6934d6175 MQTT: update default broker URL for examples
The MQTT broker URL used as default in the examples has ceased operation. All examples and documention have been updated to point to the new domain mqtt.eclipse.org.
This also required an update of the python example test scripts to use TLS 1.2
2019-10-15 09:35:23 +00:00
Angus Gratton
04ae56806c Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 15:26:58 +10:00
Angus Gratton
24d26fccde Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 13:44:24 +10:00
Anton Maklakov
afbaf74007 tools: Mass fixing of empty prototypes (for -Wstrict-prototypes) 2019-08-01 16:28:56 +07:00
chenjianqiang
e43513b610 bugfix(uart): uniform AT_CMD char configuration 2019-07-18 19:24:13 +08:00
Angus Gratton
47bbb107a8 build system: Use CMake-based build system as default when describing commands 2019-07-08 17:31:27 +10:00
Michael (XIAO Xufeng)
25ab8380c8 ci: support to build esp32s2beta simple examples 2019-07-08 09:16:06 +08:00
xueyunfei
fa02598b5c lwip_2.1.2 for idf_4.0 2019-07-07 01:51:45 +00:00
Renz Christian Bagaporo
6771eead80 examples: use new component registration api 2019-06-21 19:53:29 +08:00
Roland Dobai
151f757912 Rename Kconfig options (examples) 2019-05-21 09:32:55 +02:00
Roland Dobai
92950db44e Rename Kconfig options (components/lwip) 2019-05-21 09:09:01 +02:00
Akbar Hashim
6f5f40dae4 updated buffer size too small for popular carrier in India Airtel -> airtelgprs.com
Merges https://github.com/espressif/esp-idf/pull/3010
2019-03-21 15:06:24 +08:00
Roland Dobai
37126d3451 Correct Kconfigs according to the coding style 2019-01-29 13:37:01 +01:00