esp_flash: fix the regression of non-quad mode by default chip driver, bugs in add_device and deprecate cs_id (4.1)
See merge request espressif/esp-idf!8836
Extended test cases for DHCP server and DHCP client state transitions to include also manual transitions using esp_netif_dhcps_start/stop() esp_netif_dhcpc_start/stop()
If the olddelta argument is not a null pointer, the adjtime function returns information
about any previous time adjustment that has not yet completed.
Closes: https://github.com/espressif/esp-idf/issues/5194
Replace periph_module_enable/disable by periph_wifi_bt_common_module_enable which are in IRAM.
AddIRAM_ATTR periph_ll_wifi_bt_module_enable_clk_clear_rstandIRAM_ATTR periph_ll_wifi_bt_module_disable_clk_set_rstto fit O0 optimization level.
Delete duplicated spinlock and counter.
SD cards don't support CMD7 (select_card) in SPI mode. Highspeed probe
of sdspi will fail in this step and stop working in highspeed mode.
Remove the CMD7 in enable_hs_mode_and_check to fix this issue.
Please note that, on ESP32, you have to use the IOMUX pins to use sdspi
in 40MHz, otherwise the initialization process will report reading issue
and fail.
Some Bluetooth devices - such as an Xbox One S controller (model 1708) - report more than two external features pages and are rejected immediately. Pages 1 and 2 are marked as unhandled in btm_devctl.c anyway, so there is no reason to block devices with more pages.
(IDFGH-3515)
Signed-off-by: liqigan <liqigan@espressif.com>
Merges https://github.com/espressif/esp-idf/pull/5481
Closes https://github.com/espressif/esp-idf/issues/5470
mbedTLS stack does not keep TLS renegotiation enabled even if
relevant config option is turned on, it needs explicit API call
`mbedtls_ssl_conf_renegotiation` to do so.
This issue was observed in case of Azure IoT, where keys needs to
be refreshed periodically to keep TLS connection intact.
1. If the root is specified (FIXED-ROOT) by set type or set parent, change ie.mesh_type to MESH_ROOT before connect to router.
2. Release esp_mesh_recv_toDS when the root becomes non-root.
3. esp_mesh_set_type now supports MESH_IDLE and MESH_STA.
4. Fix ie.rc_rssi is not updated during scan and vote.
5. Fix ie.mesh_type do not match ie.layer caused by parent switch.
6. Fix during root switch, the original root doesn't disconnect from the router after it receives the switch request from the new voted root. (root switch happens by invoking esp_mesh_waive_root).
7. Fix the routing announce timer is not stopped immediately in a new root if the new root is transformed from non-root.
8. Choose the candidate with less ie.assoc when doing parent switch.
Previously both tasks had equal priority, possible for write task and another
internal task to be scheduled at the same time - starving read task and
causing data loss.
Related to IDFCI-59
1. remove warning log when mesh is started:
Error! Should use default passive scan time parameter for WiFi scan when Bluetooth is enabled!!!!!!
2. remove abort when mesh is started:
Error! Should enable WiFi modem sleep when both WiFi and Bluetooth are enabled!!!!!!
- This issue was introduced in the commit: a788e7cd3d
which updated the bt_hex() function incorrectly.
- And in bt_hex(), we use 2 for the two-dimensional array, because currently
at most two bt_hex() will be used at the same time. Also this will save
some DRAM compared with using 4.
1.In the description of the ESP_API header file, it should be the event that the application layer needs to handle, not the BTA layer.
2.Fix name typo of BTA_GATTS_CREATE_SRVC_EVT event
Closes https://github.com/espressif/esp-idf/issues/5446
In commit 309376f51a, it seems like regression
was added to use ROM level API for disabling flash write protection. This
started random firmware crashes (on specific modules) with exception
`IllegalInstruction` during encrypted flash writes.
Fix here removes relevant ROM API call, since disabling flash write protection
is already ensured by caller of this API.
Closes https://github.com/espressif/esp-idf/issues/5467
This commit fixes a bug as well as changes a behaviour.
Bugfix: During softap/httpd based provisioning, if a session was closed
midway and a new one started, it would never proceed if the http server
assigns same socket number to the new session (which happens almost always).
Now, if a session is closed, using the http callbacks, the older session
data is cleared so that a new one can be created.
Behavioural change: If a client (mobile app particularly) does not use
persistent http session i.e. all provisioning communication on the same
socket, the provisioning may fail. Earlier, since the session context was
not getting cleared, even if the client closed a session and continued
on a new one, it would go through if the socket number assigned was same
(which happens almost always).
Ideally, from a security perspective, all communication related
to secure provisioning must happen on the same socket, and so, this
change is required.
When using DPort to read fifo, fifo_cnt is not credible, we need to calculate the real cnt based on the fifo read and write pointer. When using AHB to read FIFO, we can use fifo_cnt to indicate the data length in fifo.
Added following as part of this change
1. Removed auth_changed event
2. Updated doc regarding usage of WPA/WEP secuiry modes
3. Fixed WPA2 enterprise authmode threshold.
esp2020r1 toolchain includes a nano.specs file, which instructs GCC to
substitute libc.a with libc_nano.a.
In the build system, this simplifies handling of the nano formatting
option, eliminating LIBC and LIBM global variables.
If BLK2 is empty then it's OK to continue with a warning (otherwise it may spook users into thinking
something this is wrong, but this is the expected workflow.)
If BLK2 is not empty and doesn't match then we need to fail because it won't be possible to
trust the signature.
The transport segmented TX nack and seg_pending fields must be at least
6 bits to avoid overflow for 32 segment messages. This change rearranges
the seg_tx fields to gather all state flag fields in one byte, while
making the counter fields whole bytes.
Ensures that friend messages are enqueued, even if the packet is
received with an appkey is unknown to the friend. Previously, sdu_recv
would return EINVAL if the appkey was unknown, which would prevent the
lower transport layer from adding the packet to the friend queue. This
is irrelevant for the logic in lower transport, and should not be
returned as an error.
CoAP component relies on some mbedTLS crypto configuration
options, e.g. DTLS and PSK. These configuration options if
selected, have footprint impact on generic TLS examples like
https_request or https_ota as well.
Footprint of https_request example with/without change is per below:
$ ./tools/idf_size.py new_https_request.map --diff old_https_request.map
<CURRENT> MAP file: new_https_request.map
<REFERENCE> MAP file: old_https_request.map
Difference is counted as <CURRENT> - <REFERENCE>, i.e. a positive number means that <CURRENT> is larger.
Total sizes of <CURRENT>: <REFERENCE> Difference
DRAM .data size: 14796 bytes 14796
DRAM .bss size: 23560 bytes 23680 -120
Used static DRAM: 38356 bytes ( 142380 available, 21.2% used) 38476 -120 ( +120 available, +0 total)
Used static IRAM: 89045 bytes ( 42027 available, 67.9% used) 89045 ( +0 available, +0 total)
Flash code: 554231 bytes 563823 -9592
Flash rodata: 179000 bytes 181224 -2224
Total image size:~ 860632 bytes (.bin may be padded larger) 872568 -11936
This commit moves relevant config options to CoAP specific examples
and also adds some run time warnings if they are kept disabled.
Closes https://github.com/espressif/esp-idf/issues/5262
Previous implementation violated the RFC by having both the actual opcode and WS_FIN flag set for all fragments of a message.
Fixed by setting the opcode only for the first fragment and WS_FIN for the last one
Closes IDFGH-2938
Closes https://github.com/espressif/esp-idf/issues/4974
Device name will be reset when deinit mesh stack. If not
initializing device name during the next mesh stack init,
it will fail to set the device name when using bluedroid.
Since bt_mesh_friend_init() will only be invoked when
a device is provisioned or Provisioner is enabled, so
we add a flag to indicate if the friend functionality
is initialized in case deinit before initialization.
1. Buffers for SAE messages are not freed after the handshake.
This causes memory leak, free buffers after SAE handshake.
2. SAE global data is not freed until the next WPA3 connection
takes place, holding up heap space without reason. Free theis
data after SAE handshake is complete or event fails.
3. Update wifi lib which includes memory leak fix during BIP
encryption/decryption operations.
Old version of BLE Mesh has no device role storage, because
previously we only support storing mesh node info.
If the binary of the node is upgraded from old version to a
new version (support storing provisioner info), the mesh info
of the node will not be restored because mesh role does not
exist in the flash.
When fast provisioning is enabled, Provisioner shall not
ignore messages from the nodes whose addresses are not in
the provisioning database. Because other nodes which are
not provisioned by the Primary Provisioner will send node
address messages to the Primary Provisioner.
When using fast provisioning, the Provisioner functionality
will be enabled. Unicast addresses within the pre-allocated
range will be used for provisioning nodes. And during the
address assignment, the allocated unicast address will be
checked that if it's duplicated with other nodes addresses
and the Provisioner's own addresses.
So before starting using fast provisioning, we need to update
the Provisioner address.
Since the behavior of sending segmented messages has been
changed properly, the calculation of timeout value which
will be used when sending an acknowledged message by a
client model also needs to be updated.
Add mutex to protect some variables of the mesh segmented
messages.
Currently the timeout handler of mesh will be executed in
the btc task, while the received mesh messages will be
handled in the btu task. In case some variables are set to
NULL when handled in the btu task, meanwhile these variables
are also accessed in the timeout handler, so we add mutex to
protect these variables and related operations.
The publication context is checked for NULL in bt_mesh_model_publish()
however it was dereferenced before that. Move the assignment to
ctx.send_rel to the same place where other ctx members are set.
Split mesh_util.h into mesh_byteorder.h, mesh_compiler.h,
mesh_ffs.h and mesh_util.h based on the classification of
Zephyr, which will make further porting more clear.
The Friend queue uses the message SeqAuth to determine whether the
message is already in the queue. To facilitate this, the SeqAuth is
passed around as a pointer throughout the transport modules. In the
bt_mesh_ctl_send functions, this parameter is also exposed in the API,
but the internal usage is inconsistent and buggy. Also, no one actually
uses this parameter.
- Removes seq_auth param from bt_mesh_ctl_send, instead passing NULL
directly to the friend module, to enforce its addition to the queue.
- Makes the seq_auth pointer const throughout the friend module.
Changes the behavior of the message cache to optimize for cache
capacity. Previously, the message cache's primary function was to avoid
decrypting messages multiple times, although the cache's main function
in the spec is to avoid message rebroadcasting. Optimizing for minimal
decryption causes us to fill the network cache faster, which in turn
causes more cache misses, potentially outweighing the advantage.
Now stores src + seq in message cache instead of field hash value. This
cuts cache size in two, while including more of the sequence number than
before.
Adds messages to the cache only after the packet is successfully
decrypted. This reduces noise in the cache, and ensures that no
invalid deobfuscations are added.
Additionally, this fixes a bug where multiple calls to net_decrypt with
the same packet failed, as the message cache found its own entry from
the previous call.
Implements several changes to the transport layer segmented tx to
improve group message performance:
- Moves retransmit counter to tx context instead of per packet. As every
unacked packet is sent every retransmit, the retransmit counters would
be the same in each segment. This makes it easier to control progress.
- Delays the scheduling of the retransmit until the completion of the
last segment by adding a seg_pending counter. This is essentially the
same as the old behavior, except that the old behavior might retrigger
the sending before all segments are finished if the advertising is
slow.
- Allows the group transmits to stop as soon as all retransmits have
been exhausted, instead of timing out waiting for acks that won't
come. This allows group tx to finish without error.
- Fixes a bug where a failed TX would block IV update.
- Cancels any pending transmissions of acked segments.
- Reduces log level for several common group tx scenarios that aren't
erronous.
Backport of https://github.com/apache/mynewt-nimble/pull/724
Mesh spec 1.0.1 changes proxy disabling behavior to only affect the
relaying from proxy nodes. Previously, disabling proxy would shut down
all proxy and node activity.
Tweaks from the original commit:
- Removed redundant call to bt_mesh_adv_update() in gatt_proxy_set()
- Removed invalid ref to 4.2.11.1 in node_identity_set()
---
According to Mesh Profile Spec 1.0.1, Section 4.2.11:
"If the Proxy feature is disabled, a GATT client device can connect
over GATT to that node for configuration and control. Messages from
the GATT bearer are not relayed to the advertising bearer."
Moreover some notes have been removed from the spec compared to
version 1.0:
Mesh Profile Spec 1.0, Section 4.2.11:
"Upon transition from GATT Proxy state 0x01 to GATT Proxy state 0x00
the GATT Bearer Server shall disconnect all GATT Bearer Clients."
"The Configuration Client should turn off the Proxy state as the last
step in the configuration process."
Mesh Profile Spec 1.0, Section 4.2.11.1:
"When the GATT Proxy state is set to 0x00, the Node Identity state
for all subnets shall be set to 0x00 and shall not be changed."
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
When PB-GATT support has been enabled the provisioning code "borrows"
the buffer from the proxy code. However, the way that initialization
was happening the proxy buffers were initialized only after
provisioning initialization, resulting in a corrupted buffer with
buf->data pointing to NULL. Reorder the initialization calls so that
proxy is done first and provisioning only after it.
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.
Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
The function bt_mesh_ctl_send() used to support maximum length of
11 bytes. The segmentation complies with the BLE Mesh Standard.
The ack is disabled in case of non unicast address.
Previously only mesh node info is supported to be stored
in flash. So when trying to reset the node, we only need
to judge if the BLE_MESH_VALID flag is set.
Currently we support storing both node & Provisioner info
in flash, when trying to erase the node info from flash,
the BLE_MESH_NODE flag will be checked. So we need to set
bt_mesh.flags to 0 when all the erase operations are done.
It was observed that after sending credentials, if the first
Wi-Fi conection attempt fails, the Wi-Fi provisioning managager
ignores subsequent Wi-Fi events. So, even if the device eventually
connects to the AP, the provisioning stays on indefinitely.
Changing a check so that subsequent events are also captured and
provisioning finishes successfully.
In wifi station example, set PMF(Protected Management Frames)
configuration to capable. Set WPA3 Feature in menuconfig enabled
by default. This will allow device to establish more secured
connection with AP's that support these protocols.
esp_mqtt_abort_connection: Fixed an issue which could result in a race condition and subsequent crash
esp_mqtt: Change an error print to use ESP_LOGE instead of ESP_LOGI
Move Sending MQTT connect message log from Info to Debug level
docs: Makes clear that publish API could block
Change the message printed after MQTT connection failure
During BLE Mesh Provisioner initialization, the stack will restore
the nodes information if settings storage is enabled.
Previously when a failure happens (e.g. found the same uuid) during
the restore procedure, the information of the following nodes will
not be restored and error will be directly returned.
But this will introduce some problem with user experience, because
some newly provisioned nodes information will not be restored and
Provisioner will not be able to control those nodes.
So we change the operation here, when a failure happens during the
restore procedure, Provisioner will only ignore the information of
the current node and continue restoring other nodes information.
With this change, if a Provisioner has provisioned the maximum
number of nodes, it can still report the unprovisioned device
beacon from other nodes to the application layer. And this will
be more reasonable compared with the previous implementation.
Previously when the node array of Provisioner is full, no beacon
from unprovisioned devices will be reported, only some warning
logs will be given.
Previously only check the node address when it is assigned by the
application layer. Here we also check the address when the address
is allocated internally. And this will be useful when some mesh
internal tests are performed.
Previously the BLE_MESH_MAX_STORED_NODES option is added for
internal mesh test, which will be a little confusing for the
users to understand.
Here we remove this option, instead the BLE_MESH_MAX_PROV_NODES
will be used for all the cases. For mesh internal test, when
the test function is called to add some nodes info, the info
will be stored in the array of provisioned nodes directly.
The replay protection list of Provisioner should be at least equal
to the number of nodes with the precondition that each node contains
only one element.
The help information of replay protection list is updated, and the
maximum number of nodes for Provisioner is adjusted based on the
replay protection list size.
1. fix the bug for softAP update second channel wrong
2. change wifi_scan_time_t from union to struct
3. query country code wrong when policy change from manual to auto
Commit fc03161f updated esp_ota_get_app_elf_sha256 to store and return
X number of bytes of the hash, but the test case still expected 64 bytes.
Updated test case to use CONFIG value for expected length.
This is a regression from earlier commit related to TLSV12 which used
sha functions that are currently declared static.
Solution: Follow upstream code structure and resolve the errors.
1. add enable PSRAM 2T mode function
2. abort when himem and 2T mode are enabled meanwhile
3. set SPIRAM_2T_MODE as "n" by default, enable it when needed
Using the ble mesh white list test functions, a node can choose to
only receive mesh messages from a specific node and relay the
messages for it. Messages from other nodes will be ignored.
It is not possible to write to Flash when the stack is located in
PSRAM, and it is not possible to write PSRAM buffers into Flash when
malloc can not be used.
Make the link local negotiation for IPV6 in PPP optional and
configurable.
This is because some modems do not support the IPV6 negotiation and
sending IPV6CP frames would in some cases break the network
configuration phase, resulting in a timeout during the Phase Network.
Please note that this does not disable the IPV6 support for the outgoing
communication (IPV6 is still enabled even if this option is not
selected) but just for the local link between lwIP and modem.
Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
Merges https://github.com/espressif/esp-idf/pull/4782
Closes https://github.com/espressif/esp-idf/issues/1065
Previous method was to write-protect this efuse, however on ECO3
the write protect field also covers the UART_DOWNLOAD_DIS efuse.
Doing it this way keeps the possibility of disabling UART download
mode, later.
1. Fix WiFi log print level
2. Optimize WiFi/BT coexist sleep
- If any data tx/rx in WiFi slice, fore wakeup next TBTT
- Increase active timeout time to coex TBTT interval to avoid sleep in WiFi slice
Wifi_provisioning: Change service_uuid to non standard 128 bit UUID and add retries in test script (backport v4.1)
See merge request espressif/esp-idf!8081
In commit 02d2903e39, mbedtls was
updated to release v2.16.5, where it was made mandatory to initialize
mbedtls_ctr_drbg_context before using same. It was fixed in wpa supplicant
but missed out in secure boot v2 verification code. This commit
fixes that.
Problem:
mbedtls_ctr_drbg_context was initialized in crypto_ec_point_mul. This
was okay in releases before 2.16.4 as entropy_len used to get set to
MBEDTLS_CTR_DRBG_ENTROPY_LEN in function mbedtls_ctr_drbg_seed. The
function is now changed to set the length to
MBEDTLS_CTR_DRBG_ENTROPY_LEN if previous length is 0 and hence the bug.
Solution:
Initialize mbedtls_ctr_drbg_context in crypto_ec_point_mul.
1. Bugfix for AG audio crash (change the return position)
2. Fix the error macro name and error return in hfp_hf demo
3. Fix the annotation error using UTF-8 ' (from Github)
4. Change or remove the log in SCO related code region.
5. Correct error of introduction of a function.
Change the default bootloader config to -Os to save size.
This is a useful feature because it allows switching between debug
and release configs in the app without also needing to account for a
size change in the bootloader.
Goal is that multiple faults would be required to bypass a boot-time signature check.
- Also strengthens some address range checks for safe app memory addresses
- Change pre-enable logic to also check the bootloader signature before enabling SBV2 on ESP32
Add some additional checks for invalid sections:
- Sections only partially in DRAM or IRAM are invalid
- If a section is in D/IRAM, allow the possibility only some is in D/IRAM
- Only pass sections that are entirely in the same type of RTC memory region
Allocation of the temporary internal buffer will now repeat until a small enough buffer can be
allocated, and only fail if less than a 256 byte block of internal RAM is free.
Adds unit test for the same, and generic test utility for creating memory pressure.
Previously would try allocate buffer of minimum size 16KB not maximum size 16KB, causing
out of memory errors for any large reads, or if less than 16KB contiguous free heap.
Also, if using legacy API and internal allocation failed then implementation would abort()
instead of returning the error to the caller.
Added test for using large buffers in PSRAM.
Closes https://github.com/espressif/esp-idf/issues/4769
Also reported on forum: https://esp32.com/viewtopic.php?f=13&t=14304&p=55972
The NimBLE host buffers that consume a significant amount of memory are
now allocated dynamically.
The advantage is that, the memory can be reclaimed in cases where BLE
is turned off and not required for the current boot cycle
- Add menuconfig option for NimBLE host flow control
- Include changes in `blecent` example from upstream PR!702
- add ble_hs_lock in ble_gap_unpair Upstream PR!584
- ble_hs_hci_rx_evt, upstream PR!738
Closes https://github.com/espressif/esp-idf/issues/4243
The ppp_set_auth() is guard by #if PPP_AUTH_SUPPORT in lwIP, so
make it consistent. This also simplify the code a bit because the code
in #if PAP_SUPPORT guard and #if CHAP_SUPPORT guard are exactly the same.
Once NETIF_PPP_AUTHTYPE_NONE added to esp_netif_auth_type_t, it also allows
setting NETIF_PPP_AUTHTYPE_NONE with this change.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Merges https://github.com/espressif/esp-idf/pull/4639
To allow setting auth_type to PPPAUTHTYPE_NONE, add NETIF_PPP_AUTHTYPE_NONE
to esp_netif_auth_type_t.
So even PAP/CHAP are enabled in lwIP, the application still can set
auth_type to PPPAUTHTYPE_NONE.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Fix following WiFi bugs:
1. Fix crashing during shared WEP connection
2. Remove log "age_bss: null bss
3. Add WiFi stop checking at the beginning of wifi deinit api
4. Fix espnow crash
5. Fix the bug for setting channel when WiFi is no NULL mode
6. Adjust scheme percent when BT is in connected status
7. Fix WiFi stop leads to memory leak
8. Place the Vendor Specific Element at the end of WiFi packet
1. Add an API to set Provisioner static oob value
2. Add an API to deinit BLE Mesh stack
3. Add an API to set Provisioner unicast address
4. Add an API to provision devices with fixed address
5. Add an API to store node composition data
6. Add an API to get node with device uuid
7. Add an API to get node with unicast address
8. Add an API to delete node with device uuid
9. Add an API to delete node with unicast address
10. Add an API for Provisioner to update local AppKey
11. Add an API for Provisioner to update local NetKey
12. Support Provisioner persistent functionality
13. Fix Provisioner entering IV Update procedure
14. Fix an issue which may cause client failing to send msg
15. Use bt_mesh.flags to indicate device role
16. Remove several useless macros
17. Callback RSSI of received mesh provisioning packets
18. Modify the Provisioner disable function
19. Change some log level from debug to info
20. Add parameters to Provisioner bind AppKey completion event
21. Fix node ignoring relay messages issue
22. Support using a specific partition for BLE Mesh
23. Fix compile warning when proxy related macros are disabled
24. Clean up BLE Mesh stack included header files
25. NULL can be input if client message needs no parameters
26. Fix compile warning when BT log is disabled
27. Initilize BLE Mesh stack local variables
28. Support using PSRAM for BLE Mesh mutex, queue and task
29. Add a menuconfig option to enable using memory from PSRAM
30. Clean up sdkconfig.defaults of BLE Mesh examples
Fix bugs about role switch
Fix watchdog timeout when sleep enabled and crash without enabling sw coex
Fix ble crash issue triggered by ble event irq miss(0x20000)
Future events scheduling error in case of wifi and bluetooth.
Fix an error of mesh deinit lock.
Fix mesh send returns TIMEOUT.
Increase root window close time to 120s.
Clear ie.child when the child connected or fully associated.
Update rc_rssi when roots direct/forward.
Fix assoc in mesh ie wrong.
Mesh packets use AC_VI instead of AC_BE.
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
connected, sniff, a2dp pause, etc).
2. Support WiFi + Classic BT + BLE mesh coexistence scienario.
3. Improve WiFi scan and connect succeed ratio in coexistence scienario.
4. Do not support to choose software coexistence preference anymore for it is
determined according to coexistence scienario automatically.
components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled
components/ble_mesh: Fix some bugs about ble mesh
1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
MQTT: update submodule to point to latest commit.
Closes IDF-1162, IDF-1126, IDFGH-2197, IDFGH-2235, IDFGH-2293, FCS-254, and FCS-267
See merge request espressif/esp-idf!7216
bugfix/pthread: fix pthread_once() race condiion possibility adding critical section in compare and set function
Closes IDFGH-2448
See merge request espressif/esp-idf!7236
this issue is mainly exposed when using larger (4096) client key in TLS mutual auth,
since it uses multiplications > 2048 when mbedtls_mpi_mul_mpi is used in recursion,
which works only if both operands point to different location than result since
mpi_mult_mpi_overlong() called mbedtls_mpi_grow() to reallocate buffers used in previous
pointer arithmetics and thus corrupting it. Fixed by growing the mpi buffer before
calling mpi_mult_mpi_overlong()
The following commit refactors the CAN driver such that
it is split into HAL and Lowlevel layers. The following
changes have also been made:
- Added bit field members to can_message_t as alternative
to message flags. Updated examples and docs accordingly
- Register field names and fields of can_dev_t updated
tcp_transport/ws_client: websockets now correctly handle messages longer than buffer
Closes IDF-1084 and IDF-1083
See merge request espressif/esp-idf!6740
For SoftAP provisioning, if we start Wi-Fi connection as soon as the
apply config request is received, it has been observed that the clients
(Phone apps mostly) do not get the response for this as we switch the
Wi-Fi channel, causing a momentary disconnection.
Delaying the connection calls helps mitigate the issue.
Signed-off-by: Piyush Shah <piyush@espressif.com>
transport_ws can now be read multiple times in a row to read frames larger than the buffer.
Added reporting of total payload length and offset to the user in websocket_client.
Added local example test for long messages.
Closes IDF-1083
DISABLED_FOR_TARGETS macros are used
Partly revert "ci: disable unavailable tests for esp32s2beta"
This partly reverts commit 76a3a5fb48.
Partly revert "ci: disable UTs for esp32s2beta without runners"
This partly reverts commit eb158e9a22.
Partly revert "fix unit test and examples for s2beta"
This partly reverts commit 9baa7826be.
Partly revert "efuse: Add support for esp32s2beta"
This partly reverts commit db84ba868c.
The upper transport layer is using big endian ordering. The
PreviousAddress field of a Friend Request message should therefore
be converted to native endianess using sys_cpu_to_be16().
If the duration to publish is roughly the same as the period, we might
end up with elapsed == period, which returns 0 and cancel the periodic
publication. Instead 1 should be returned, just like when the elapsed
time is greater than the period.
Previously the FastPeriodDivisor value was introduced to the model
publication struct. Based on the way it was grouped it seems the
intention was to fit it within the same octet as other bit fields,
but it actually makes the octet overflow by one bit. This ends up
creating another u8_t variable which in turn adds 24 bits of padding
after it.
To keep the size of the struct as compact as possible, group the flag
together with the key index, since that only requires 12 bits. Some
care is needed here, since the mesh stack does have special internal
key index values that require more than 12 bits such as
BLE_MESH_KEY_UNUSED and BLE_MESH_KEY_DEV. In this case restricting
ourselves to 12 bits is fine since the value in the model publication
struct follows 1:1 the value received in the Config Model Publication
Set message, and there the parameter is defined to be exactly 12 bits.
For Low Power node and Proxy Server, the two features
depend on BLE_MESH_NODE in Kconfig.in, here in the
stack there is no need to judge if CONFIG_BLE_MESH_NODE
is enabled.
According to Mesh Spec 3.4.5.3, a node shall implement a local
network interface. And here we limit the situation just based
on the spec, and Provisioner directly sending the msg without
passing through the local network interface.
The 16-bit format group addresses will be stored,
but we don't store (or restore) the virtual label UUIDs,
i.e. after a power cycle the 16-bit group addresses
would be meaningless.
Creates macros for determining model message lengths based on opcode,
payload length and MIC size. Also adds macro wrapping
NET_BUF_SIMPLE_DEFINE to serve the most common use case.
Re-encrypts single-segment application messages when the network seqnum
has changed, to avoid encrypting messages with different seqnums in
network and transport. This operation is only required for unsegmented
messages, as segmented messages don't need to use the same seqnum in
network.
Reinstates the special adv data for friend messages to store the app key
index.
Stores friend queue packets unencrypted, removing any out-of-order
issues caused by seqnum allocation. Also moves as much of the metadata
storage as possible into the packet, allowing us to free up some bytes
of net_buf user data for friend packets.
newlib/assert: replace unlikely with likely to keep original assertion
newlib/assert: fix assert macro that uses likely
freertos/port: add the missing sdkconfig.h back
newlib/assert: assert macro back to a single line
esp_common/esp_compiler: renamed esp_macros file to a more specific one
esp_common/esp_compiler: removed CONTAINER_OF macro, it was a duplicate
components/freertos: placed likely macros around port and critical sections
component/freertos: placed likely macros on lists module
components/freertos: placed unlikely macros inside of assertion points, they likely wont fail
components/freertos: added likely macros on queue modules
FreeRTOS queues are one of most hot code path, because to queues itself tend to
be used a lot by the applications, besides that, queues are the basic primitive
to form both mutexes and semaphores, The focus here is to place likely
macros inside lowest level send and receive routines, since they're common
from all kobjects: semaphores, queues, mutexes and FR internals (like timer queue)
components/lwip: placed likely/unlikey on net-interfaces code
components/fatfs: added unlikely macros on disk drivers code
components/spiffs: added unlikely macros on low level fs driver
components/freertos: added likely/unlikely macros on timers and ticker
freertos/event_group: placed likely/unlikely macros on hot event group code paths
components/sdmmc: placed likely / unlikely macros on lower level path of sdmmc
components/bt: placed unlikely macros around bt HCI functions calling
components/lwip: added likely/unlikely macros on OS port code section
components/freertos: fix code style on tick handler
On Xtensa, backtrace can not recover the two most significant bits of
the address, as the window call size is encoded in these bits.
Because of this, __builtin_return_address modifies these MSBs to
match those of the callee, "fixing" the address. An unfortunate side
effect is that the zero return address, which usually terminates the
backtrace, gets converted to 0x40000000. While there is a valid
instruction at this address, its occurrence in the backtrace is
highly unlikely: this is the first instruction of WindowOverflow4
vector, and IDF apps switch VECBASE to an IRAM location very early at
startup.
Even if frame->exccause != PANIC_RSN_CACHEERR, it is possible that
the cache error interrupt status is set. For example, this may happen
due to an invalid cache access in the panic handler itself.
Check cache error interrupt status instead of frame->exccause to
decide whether to do CPU reset or digital reset.
Also remove unnecessary esp_dport_access_int_pause from
esp_cache_err_get_cpuid, since the panic handler already calls
esp_dport_access_int_abort on entry.
* Don't bother checking the chip revision if it looks like the partition
doesn't really contain an app
* Don't print the "info" level about the revision & min revision unless
we're in the bootloader (otherwise it gets printed at random times
during the OTA process)
When node is being reset, the init functions of each sig-defined
models will be invoked again, this will cause memory leak because
some model internal data will be allocated again.
Hence before trying to allocate memory for them, we add some check
to make sure no memory has been allocated previously.
And for client model, when the init functions are invoked again,
we will clear the list items.
Since in b0491307, which has introduced the optimized window spill
procedure, _xt_context_save did not work correctly when called from
_xt_syscall_exc. This was because unlike _xt_lowint1, _xt_syscall_exc
does not save PS and EPC1. The new version of _xt_context_save
modified PS (on purpose) and EPC1 (accidentally, due to window
overflow exceptions), which resulted in a crash upon 'rfi' from the
syscall.
This commit adds restoring of PS and EPC1 in _xt_context_save. It also
slightly reduces the number of instructions used to prepare PS for
window spill.
Unit test for setjmp/longjmp (which were broken by this regression)
is added.
Closes https://github.com/espressif/esp-idf/issues/4541
1. fix the bug when modifying the channel info of peer node
2. fix the crash when modifying peer node between unencrypted and encrypted
3. fix the bug for fetch peer
4. modify the esp_wifi_set_channel() function
5. fix the bug that the channel parameter doesn't work when adding peer node
Closes https://github.com/espressif/esp-idf/issues/2833
Closes https://github.com/espressif/esp-idf/issues/4311
* If esp_vfs_spiffs_register is called with an explicit partition
label, other SPIFFS functions (info, format, unregister) must be
called with the same label.
* On the other hand, if label was NULL in the call to
esp_vfs_spiffs_register and the first matching partition was used,
calls to the rest of the SPIFFS functions should be done with NULL
partition_label argument.
Fix the Doxygen documentation. Update the example accordingly, in case
a user modifies "partition_label" value in esp_vfs_spiffs_conf_t conf
initializer.
Closes https://github.com/espressif/esp-idf/issues/4450
