David Čermák
8cd16b60f5
Merge branch 'bugfix/ppp_deinit_failure_v4.2' into 'release/v4.2'
...
esp_modem: Fixed race condition on exiting PPP mode (v4.2)
See merge request espressif/esp-idf!11870
2021-01-19 02:42:50 +08:00
Jiang Jiang Jian
b24ccd8a20
Merge branch 'bugfix/fix_iperf_example_crash_issue_v4.2' into 'release/v4.2'
...
Bugfix/fix iperf example crash issue v4.2 (backport v4.2)
See merge request espressif/esp-idf!12024
2021-01-18 19:09:37 +08:00
David Čermák
28371f45a4
Merge branch 'bugfix/ppp_netif_free_v4.2' into 'release/v4.2'
...
esp-modem: Remove esp-netif destroy from modem network glue code (v4.2)
See merge request espressif/esp-idf!11872
2021-01-16 00:57:15 +08:00
David Cermak
84039dc77d
esp_modem: Fixed race condition on exiting PPP mode
...
esp_modem_stop_ppp() stops both ppp netif and switches the modem back to
command mode. IF these two actions are not synchronised, we might
experience issues of
* active PPP session trying to send/receive uart-data
* command mode already active before modem switched to it
both resulting in crashes.
Fixed by introducing the transition mode and running these actions in sequence
* set esp-modem to transition mode
* enter command mode, wait for the reply or re-sync
* close the PPP netif
* wait until the netif closes
Other fixes include ignoring certain events if modem component not ready
or not in appropriate mode:
* ignoring all UART events comming from DTE with no DCE attached
* ignore pattern detection in PPP mode
2021-01-15 17:38:30 +01:00
David Čermák
67a3ff8a4b
Merge branch 'bugfix/esp_netif_ppp_event_data_v4.2' into 'release/v4.2'
...
esp-netif: Fix PPP netif event posting to include esp_netif data (v4.2)
See merge request espressif/esp-idf!11868
2021-01-15 23:48:27 +08:00
xiehang
b78fbdab12
example: Scan failure should not cause system crash
2021-01-15 20:21:35 +08:00
xiehang
30becdfaab
example: do not check the return value of esp_wifi_connect()
2021-01-15 20:20:17 +08:00
David Cermak
53fc156adb
esp-modem: Remove esp-netif destroy from modem network glue code
...
To be in line with other interfaces, when deleting the driver and it's glue layer to esp-netif, we DO NOT delete the related esp-netif (since is was allocated and created outside of the glue code and it works the same way in esp-eth and esp-wifi driver/glue layers).
Closes https://github.com/espressif/esp-idf/issues/5486
2021-01-15 11:48:26 +00:00
lly
a3fa7dda33
ble_mesh: ci: Add ble & ble mesh coex sdkconfig test files
2021-01-14 07:30:47 +00:00
lly
3a1018f603
ble_mesh: ci: Add settings sdkconfig test files
2021-01-11 10:08:00 +08:00
Island
2aafcd9b1f
Merge branch 'feat/ble_mesh_provisioner_recv_hb_support_v4.2' into 'release/v4.2'
...
Feat/ble mesh provisioner recv hb support (v4.2)
See merge request espressif/esp-idf!11913
2021-01-08 18:30:35 +08:00
lly
1efa401884
ble_mesh: ci: Add enabling hb recv sdkconfig file
2021-01-08 09:32:23 +08:00
Marius Vikhammer
8c4839e9e6
CI: change icmp example test address
...
Use a server that is inside the great firewall of china for CI test.
This avoid issues due to proxies, network configs etc.
2021-01-07 14:49:29 +08:00
David Cermak
c5b2252e03
esp-netif: Fix PPP netif event posting to include esp_netif data
...
Closes https://github.com/espressif/esp-idf/issues/6009
2021-01-04 16:41:25 +01:00
liqigan
40873d2026
fix spp vfs demo crash when use dynamic memory
2020-12-23 15:06:34 +08:00
dongyou
0bd758c0b1
WIFI: Iperf example's parameter opt was uninitialized, may leads setsockoption invalide if it equal to 0
2020-12-22 15:46:36 +08:00
David Čermák
0386b19d8b
Merge branch 'bugfix/mdns_query_id_v4.2' into 'release/v4.2'
...
mdns: Responding: Fix query ID, add questions if not strict mode (v4.2)
See merge request espressif/esp-idf!10806
2020-12-17 18:37:18 +08:00
Ivan Grokhotkov
b1b19495a1
Merge branch 'test/disable_twai_example_ci_v4.2' into 'release/v4.2'
...
Temporarily disable TWAI network example test (backport v4.2)
See merge request espressif/esp-idf!11561
2020-12-16 04:20:26 +08:00
Ivan Grokhotkov
8224c75211
Merge branch 'bugfix/parttool_example_test_fail_v4.2' into 'release/v4.2'
...
examples/parttool: fix the test to work on parallel test runner (backport v4.2)
See merge request espressif/esp-idf!10373
2020-12-16 04:09:03 +08:00
David Cermak
e95f97d40e
mdns test: Add test to resolve esp32 hostname with DiG
2020-12-15 19:01:33 +00:00
David Cermak
05211963ee
examples: Common connect component: Unregister shutdown handler on disconnection
...
To be able to connect smoothly after disconnecting, we have to unregister all handlers including shutdown handler on disconnection
2020-12-15 19:01:33 +00:00
David Čermák
a1e1470447
Merge branch 'bugfix/fix_esp_modem_mode_switch_timeout_v4.2' into 'release/v4.2'
...
fix esp_modem switch mode timeout (v4.2)
See merge request espressif/esp-idf!11395
2020-12-16 02:57:44 +08:00
David Čermák
99cb0f25eb
Merge branch 'bugfix/pppos_ignored_modem_start_return_v4.2' into 'release/v4.2'
...
pppos client: modem netif fix ignoring potential modem-start error (v4.2)
See merge request espressif/esp-idf!11394
2020-12-15 16:15:27 +08:00
David Čermák
99be1aca73
Merge branch 'bugfix/fix_netsuite_tx_wrap_v4.2' into 'release/v4.2'
...
CI: esp_netif tests: Fix netsuite driver layer per wifi optimization changes (v4.2)
See merge request espressif/esp-idf!11388
2020-12-15 16:14:45 +08:00
Shubham Kulkarni
b951b5adec
esp_http_client: Skip check for redirection counter if status code is success.
...
Set disable_auto_redirect in esp_http_client example to validate this condition in CI
2020-12-14 13:58:28 +05:30
lly
6510fbb66d
ble_mesh: ci: Add PB-ADV & PB-GATT sdkconfig test files
2020-12-11 13:15:54 +00:00
Darian Leung
19e6434f37
twai: Temporarily disable network example test
...
Disabling network example test due to issue with synchronizing the
start of each DUT
2020-12-10 21:27:46 +08:00
lly
6f104362c7
ble_mesh: example: Update sdkconfig test files for disabling Health Server model
2020-12-10 09:32:10 +00:00
lly
5fd4d53922
ble_mesh: example: Fix fast provisioning compile error
2020-12-10 09:32:10 +00:00
lly
7f1a0e1552
ble_mesh: ci: Add disabling mesh model sdkconfig test files
2020-12-10 09:32:10 +00:00
lly
7e945e5fa8
ble_mesh: ci: Add disabling mesh deinit sdkconfig test files
2020-12-10 09:32:10 +00:00
Jiang Jiang Jian
e287e3ef9d
Merge branch 'bugfix/backport_some_lwip_bugs_1120_v4.2' into 'release/v4.2'
...
lw-ip:backport bugfix lwip for v4.2(backport 4.2)
See merge request espressif/esp-idf!11307
2020-12-09 22:31:32 +08:00
Jiang Jiang Jian
f03d543139
Merge branch 'bugfix/blufi_config_potential_double_free_v4.2' into 'release/v4.2'
...
Bugfix/blufi config potential double free v4.2
See merge request espressif/esp-idf!11163
2020-12-09 22:26:19 +08:00
Angus Gratton
82bcdcaeaf
Merge branch 'bugfix/fix_partition_table_in_flash_encryption_example_v4.2' into 'release/v4.2'
...
example/flash_encryption: Fix partition table (v4.2)
See merge request espressif/esp-idf!10851
2020-12-08 09:06:07 +08:00
Angus Gratton
117be7a870
Merge branch 'bugfix/blecent_example_test_4.2' into 'release/v4.2'
...
Fix CI blecent example test (backport v4.2)
See merge request espressif/esp-idf!11271
2020-12-08 09:01:45 +08:00
Mahavir Jain
171eddcd01
Merge branch 'feature/esp_cryptoauthlib_sub_update_v4.2' into 'release/v4.2'
...
esp-cryptoauthlib: Update submodule pointer to add a new feature. (v4.2)
See merge request espressif/esp-idf!10830
2020-12-07 16:15:13 +08:00
Shivani Tipnis
4c533a1e53
ci: Fix blecent example test
...
(cherry picked from commit fc146a98e4
)
2020-11-30 22:44:52 +05:30
morris
6270de58ad
fix esp_modem switch mode timeout
...
Closes https://github.com/espressif/esp-idf/issues/3506
Closes https://github.com/espressif/esp-idf/issues/4324
2020-11-27 20:11:38 +01:00
David Cermak
99cb5a7c8d
pppos client: modem netif fix ignoring potential modem-start error
...
esp-modem netif glue layer implements esp-netif attach callback to setup corresponding driver functions and start the modem. The error code of esp_modem_start_ppp() was ignored and ESP_OK returned in all cases. Fixed by passing esp_modem_start_ppp()'s error code to post_attach callback.
Closes https://github.com/espressif/esp-idf/issues/5430
2020-11-27 20:10:06 +01:00
David Cermak
bdc914bbf4
CI: esp_netif tests: Fix netsuite driver layer per wifi optimization changes
...
esp-wifi introcuded wifi tx optimization in !9147 . Update needed in netsuite to pass the tx data using function
Closes https://github.com/espressif/esp-idf/issues/6161
2020-11-27 12:00:07 +01:00
InfiniteYuan
cd045c60d9
bugfix: Delete local variables to avoid null global variables
2020-11-25 20:52:27 +08:00
wangcheng
1be101f342
component/bt: Add a macro to control the compilation of blufi.
2020-11-24 10:44:57 +08:00
xueyunfei
501fce7fdd
backport bugfix lwip for v4.2
2020-11-20 14:44:13 +08:00
Aditya Patwardhan
c2fbda0e6d
esp_local_ctrl: Updated the expired cacert.pem
2020-11-12 10:16:22 +05:30
He Yin Ling
e31dd41e00
Merge branch 'bugfix/example_test_import_error_4.2' into 'release/v4.2'
...
bugfix: import error in example tests (4.2)
See merge request espressif/esp-idf!11048
2020-11-09 19:21:10 +08:00
Chen Yu Dong
9cf81750b9
bugfix: import error in example tests
2020-10-30 16:24:08 +08:00
liqigan
783c5ecee2
fix ag example outgoing callback not triggered
...
Closes https://github.com/espressif/esp-idf/issues/4967
2020-10-28 20:25:43 +08:00
Jiang Jiang Jian
c97d4cde56
Merge branch 'feature/add_ipv6_ping_for_4.2' into 'release/v4.2'
...
lw-ip:add feature for ipv6 ping(backport 4.2)
See merge request espressif/esp-idf!10995
2020-10-27 22:36:57 +08:00
Jiang Jiang Jian
22f49e0fa9
Merge branch 'bugfix/ble_mesh_settings_fix_v4.2' into 'release/v4.2'
...
Bugfix/ble mesh settings fix (v4.2)
See merge request espressif/esp-idf!10784
2020-10-27 18:48:06 +08:00
Krzysztof Budzynski
a5ddeef60b
Merge branch 'feature/explain_hello_world_files_v4.2' into 'release/v4.2'
...
docs: Add explanation of hello_world folder contents (v4.2)
See merge request espressif/esp-idf!10775
2020-10-27 12:39:13 +08:00
xueyunfei
e7e5884a77
lwip:add feature for ipv6 ping
2020-10-27 10:27:30 +08:00
Chen Yu Dong
f12808533d
ci: move auto_test_script to new repo (backport 4.2)
2020-10-24 09:24:38 +08:00
Angus Gratton
2a7dfb2320
examples: Move idf_as_lib sdkconfig file to the project directory
...
Also add some explanation about configuring the project in the README
Previously with the default build-esp32.sh script, the build directory was
deleted and recreated so the project would always be built with default config.
2020-10-16 10:11:39 +11:00
lly
147db2f700
ble_mesh: ci: Enable settings in sdkconfig.ci.xxx
2020-10-15 11:48:14 +00:00
Ivan Grokhotkov
514389681c
examples: fix flash encryption example test
...
Commit 5e8795eebe
has changed the partition table offset, which
has resulted in the ciphertext not matching the one expected in the
example test.
Fix by calculating the ciphertext using espsecure.py.
2020-10-15 18:39:45 +08:00
KonstantinKondrashov
f5475db6e1
example/flash_encryption: Fix partition table and sdkconfig.defaults
...
When the flash encryption is enabled then we do not need to change the partition table.
The partition_example.csv should not have fixed offsets for partitions because we want to move the whole table.
The fixed offsets in the table were cleared.
2020-10-15 18:36:17 +08:00
Aditya Patwardhan
9316961219
esp-cryptoauthlib: Update submodule pointer to add a new feature.
2020-10-15 05:16:38 +00:00
Krzysztof Budzynski
b25f3cd524
docs: Add explanation of hello_world folder contents (v4.2)
2020-10-14 07:22:09 +00:00
Angus Gratton
805a4d9b3f
Merge branch 'bugfix/prov_retry_failures_v4.2' into 'release/v4.2'
...
ci: Add retries for all provisioning methods, some refactors (v4.2)
See merge request espressif/esp-idf!9387
2020-10-14 10:41:42 +08:00
Mahavir Jain
6d37ad39aa
provisioning: use memcpy instead of strncpy for copying SSID
...
Per WiFi library requirement, SSID can be non-null terminated string
if its length goes to 32 bytes (maximum). Use of strncpy in this case,
along with compiler optimization level -O2 results in some warnings
for potential use of non-null terminated strings.
Fix here ensures use of memcpy to copy SSID string upto appropriate
desired length. This helps to avoid compiler specific workaround
flags added earlier.
Closes https://github.com/espressif/esp-idf/issues/5866
Closes IDFGH-3983
2020-09-17 15:51:32 +05:30
Roland Dobai
4e27122ee5
CI: Fix regex in ulp_adc example test
2020-09-12 08:01:53 +02:00
Ivan Grokhotkov
0e191cf70e
examples/parttool: fix the test to work on parallel test runner
...
Pass the DUT port to parttool_example.py as an argument.
2020-09-09 18:35:07 +02:00
lly
8fe75ff3ce
ble_mesh: example: Fix sensor data wrong iteration
2020-09-04 11:54:52 +08:00
David Cermak
ec2262e5a4
http_server: WebSocket server to set flag in transmitted messages by default
...
Add logic to set `FIN` flag automatically for transmitted WS frames, but
if `fragmented` option set indicating an expert/manual mode, then the
`FIN` flag is set according to the `final` option.
2020-09-02 07:54:29 +00:00
David Cermak
4da38b6769
http_server example: WebSocket server to set final flag in async messages
...
Closes https://github.com/espressif/esp-idf/issues/5405
2020-09-02 07:54:29 +00:00
lly
528747ac4c
ble_mesh: example: Remove some useless included header files
2020-09-01 14:10:27 +08:00
Carlos Sobrinho
840b7f2de7
Fix compilation warnings about portmacro being already define.
2020-09-01 14:09:41 +08:00
Michael (XIAO Xufeng)
06d1f69d84
Merge branch 'feature/vfs_uart_set_line_ending_v4.2' into 'release/v4.2'
...
feature: support vfs uart set line endings with specified uart number release/v4.2
See merge request espressif/esp-idf!9596
2020-08-30 22:34:47 +08:00
Michael (XIAO Xufeng)
1b0691f29a
Merge branch 'feature/esp32s2_adc_calib_V1_bp4.2' into 'release/v4.2'
...
driver/adc: support for esp32s2 adc calibration scheme (backport 4.2)
See merge request espressif/esp-idf!10064
2020-08-29 23:22:47 +08:00
He Yin Ling
22221b073b
Merge branch 'test/merge_ble_mesh_node_and_provioner_in_console_v4.2' into 'release/v4.2'
...
Test:merge ble mesh node and provioner in console
See merge request espressif/esp-idf!9913
2020-08-21 19:59:21 +08:00
Lu Chang Jie
63d2a19925
Test: merge ble mesh node and provioner in console
2020-08-21 19:59:20 +08:00
Wu Bo Wen
4cbed9b364
driver/adc: support for esp32s2 adc calibration scheme
...
ESP32 lets the user choose from using Vref, Lookup Table, and Two-Point Calibration. In ESP32S2 only two-point calibration is supported. This commit support these changes in idf.
Closes https://github.com/espressif/esp-idf/issues/5455
2020-08-17 14:43:41 +08:00
houwenxiang
3967e1b6d2
vfs: support vfs uart set line endings with specified uart number (release/v4.2)
2020-08-14 16:01:14 +08:00
liqigan
6e94f6f9f4
add API esp_spp_stop_srv(), fix the error parameter in esp-idf/examples/bluetooth/bluedroid/classic_bt/bt_spp_initiator/main/example_spp_initiator_demo.c and fix collection of SPP
...
Closes https://github.com/espressif/esp-idf/issues/5409
Closes https://github.com/espressif/esp-idf/pull/5408
See merge request espressif/esp-idf!9114
2020-08-13 12:08:28 +08:00
Jiang Jiang Jian
4382ec4b8d
Merge branch 'component/seperate_bta_jv_l2c_4.2' into 'release/v4.2'
...
Component/seperate bta jv l2c 4.2
See merge request espressif/esp-idf!9644
2020-08-07 14:18:02 +08:00
weitianhua
a32fc5a2bb
Fix tsk watchdog when running spp vfs demo
2020-08-01 16:40:43 +08:00
Darian Leung
e6db25af9d
TWAI: Add ESP32-S2 support
...
This commit adds TWAI driver support for the
ESP32-S2. The following features were added:
- Expanded BRP support
- Expanded CLKOUT Divider Support
- Updated example READMEs
2020-07-30 22:09:39 +08:00
fuzhibo
9bc72d5732
driver(touch): fix touch sensor driver redundancy
2020-07-30 11:41:11 +08:00
Nachiket Kukade
3af4b51a5c
Fix handling of multiple AP credentials in WPS
...
WPS can send multiple AP credentials, while existing implementation
will only use the first credentials which could be for the 5G band.
Fix this by passing these credentials to the App and attempting
to connect using each of those. Older Apps will remain compatible
without breaking WPS, but the issue will remain.
2020-07-27 21:41:20 +08:00
Aditya Patwardhan
04e5b16f74
esp32/secure_element: update esp-cryptoauthlib submodule pointer
2020-07-24 09:45:00 +05:30
lly
49145856a2
ble_mesh: ci: Enable friend & low power in build check
2020-07-16 11:02:25 +08:00
Island
d8c657c6f0
Merge branch 'bugfix/ble_mesh_add_misc_check_v4.2' into 'release/v4.2'
...
Bugfix/ble mesh add misc check (v4.2)
See merge request espressif/esp-idf!9630
2020-07-16 10:52:26 +08:00
Fu Hanxi
a73b0c3eb6
ci: Modify some dut-unrelated example tests env tag from Example_WIFI to Example_GENERIC
2020-07-15 16:54:03 +08:00
lly
cf5b69389e
ble_mesh: example: Add result check during mesh init
2020-07-15 16:10:48 +08:00
lly
e58d982903
ble_mesh: ci: Add iram & psram configurations
2020-07-14 21:19:32 +08:00
Mahavir Jain
c57f9b76cb
Merge branch 'bugfix/ota_ci_failures_v4.2' into 'release/v4.2'
...
Increse receive timeout in OTA Example tests to fix CI failures (v4.2)
See merge request espressif/esp-idf!9588
2020-07-13 23:01:23 +08:00
Ivan Grokhotkov
31121e5af1
Merge branch 'bugfix/rs485_test_temp_disable_v42' into 'release/v4.2'
...
Bugfix/rs485 test temp disable (backport v4.2)
See merge request espressif/esp-idf!9525
2020-07-13 20:41:42 +08:00
Shubham Kulkarni
1f16f5cf22
Increse receive timeout in sdkconfig.ci to fix CI failures
2020-07-13 10:15:01 +05:30
Jiang Jiang Jian
d58bb32f95
Merge branch 'bugfix/fix_build_err_in_cpp_backport_v4.2' into 'release/v4.2'
...
ble_hid_device_demo: fix build if building with c++ backport v4.2
See merge request espressif/esp-idf!9230
2020-07-09 15:25:51 +08:00
Angus Gratton
89fa339732
ci provisioning: Add some experiments to check the runner's STA state
...
Not clear why sometimes it associates without negotiating a new DHCP lease.
2020-07-09 04:56:44 +00:00
Angus Gratton
9c6c6e6885
legacy provisioning: Always try to reconnect when disconnected
...
Some APs may fail authentication temporarily if they have too many
associated stations, for example.
2020-07-09 04:56:44 +00:00
Angus Gratton
130c97ad69
esp_prov: Refactor to use new 'wait_wifi_connected' function
...
Means all provisioning examples will have the same retry behaviour.
2020-07-09 04:56:44 +00:00
Angus Gratton
ae586deeeb
ci provisioning: Use strings instead of "magic numbers" for connection state
2020-07-09 04:56:44 +00:00
Angus Gratton
5e0e4a5f01
ci: Wait up to 60 seconds for client to connect to DUT in provisioning test
2020-07-09 04:56:44 +00:00
Krzysztof Budzynski
9eab094658
Merge branch 'doc/broken_readme_links_v4.2' into 'release/v4.2'
...
Docs: Fix broken README links (v4.2)
See merge request espressif/esp-idf!9499
2020-07-08 23:53:03 +08:00
Jiang Jiang Jian
ccc4f1337b
Merge branch 'doc/add_UUID_description_in_gattc_demo_backport_v4.2' into 'release/v4.2'
...
docs:add 128-bit UUID description backport v4.2
See merge request espressif/esp-idf!9224
2020-07-08 16:14:45 +08:00
Angus Gratton
0cb87f67da
Merge branch 'feature/console_repl_over_uart_v4.2' into 'release/v4.2'
...
console_repl over UART (v4.2)
See merge request espressif/esp-idf!9422
2020-07-08 16:10:37 +08:00
Ivan Grokhotkov
aec1353ffe
ci: temporarily disable RS485 related tests
2020-07-08 06:54:24 +02:00
Marius Vikhammer
e4e5b18c61
Fix broken README links
2020-07-07 17:11:32 +08:00
Island
de5d145c9b
Merge branch 'bugfix/ble_mesh_readme_fix_v4.2' into 'release/v4.2'
...
ble_mesh: example: Fix example README & tutorial link error (v4.2)
See merge request espressif/esp-idf!9434
2020-07-02 11:29:26 +08:00
Island
fcef568c70
Merge branch 'bugfix/ble_mesh_compile_error_v4.2' into 'release/v4.2'
...
Bugfix/ble mesh compile error (v4.2)
See merge request espressif/esp-idf!9430
2020-07-02 11:28:55 +08:00
Roland Dobai
6e7a091e39
Fix SNTP example test to match pattern
2020-07-01 14:37:06 +02:00
lly
f14a71e8b7
ble_mesh: example: Fix example README & tutorial link error
2020-07-01 14:36:30 +08:00
lly
f0518dfba5
ble_mesh: ci: Add different proxy configurations
2020-07-01 11:54:32 +08:00
morris
98d7f13c24
console_repl: change config structure to support different devices
2020-06-30 20:18:27 +08:00
Island
fa8e6918c1
Merge branch 'bugfix/ble_mesh_example_tag_define_v4.2' into 'release/v4.2'
...
ble_mesh: Move TAG definition to each example (v4.2)
See merge request espressif/esp-idf!9305
2020-06-28 20:25:06 +08:00
Angus Gratton
b53daeecee
ci: Temporarily remove the esp_http_client httpbin redirect tests
...
Need to host httpbin ourselves or wait for
postmanlabs/httpbin/issues/617 to be resolved
2020-06-25 07:57:57 +10:00
lly
a2e14140b3
ble_mesh: Move TAG definition to each example
...
Move the TAG definition of each example to the corresponding
source file (previously it is defined in the common example
intialization header file), which can avoid the redefinition
of TAG in some situations.
2020-06-24 12:19:06 +08:00
Island
aaeb2ba733
Merge branch 'bugfix/att_buffer_count_fixed_v4.2' into 'release/v4.2'
...
Bugfix/att buffer count fixed v4.2
See merge request espressif/esp-idf!9161
2020-06-22 11:44:54 +08:00
Elvis Dukaj
41f178f5eb
ble_hid_device_demo: fix build if building with c++
...
Signed-off-by: Elvis Dukaj <elvis.dukaj@gmail.com>
Signed-off-by: liminyang <liminyang@example.com>
Merges https://github.com/espressif/esp-idf/pull/5191
2020-06-18 15:32:52 +08:00
liminyang
920273e619
docs:perfect 128-bit UUID description
...
The previous description is not easy for the reader to understand, some changees have been made to perfect it.
Closes https://github.com/espressif/esp-idf/issues/5057
2020-06-18 11:57:47 +08:00
ChenJianxing
7cbb970b50
esp32s2: disable sdmmc api
2020-06-17 14:53:17 +08:00
ChenJianxing
835186b3b9
esp_wifi: re-enable build wifi example
2020-06-17 14:52:58 +08:00
liqigan
4dd29dac94
components/bt: Adjust the description of esp_bt_gap_start_discovery
and esp_bt_gap_cancel_discovery
.
...
Add some comments to explain why `ESP_BT_GAP_DISC_STATE_CHANGED_EVT` is not reported.
2020-06-16 22:18:21 +08:00
wangcheng
f9b0cd1847
components/bt: Add api to query the number of available buffers for the current connection
2020-06-13 15:09:36 +08:00
Jiang Jiang Jian
21a9c9b653
Merge branch 'bugfix/authmode_degrade_fix_v4.2' into 'release/v4.2'
...
esp_wifi: Remove auth_changed event and fix wpa2_ent authmode threshold(backport v4.2)
See merge request espressif/esp-idf!9090
2020-06-09 17:30:50 +08:00
kapil.gupta
f74729c3bc
esp_wifi: Remove auth_changed event and fix wpa2 authmode threshold
...
Added following as part of this change
1. Removed auth_changed event
2. Updated doc regarding usage of WPA/WEP secuiry modes
3. Fixed WPA2 enterprise authmode threshold.
2020-06-08 12:53:22 +05:30
David Čermák
cc99cac782
Merge branch 'feature/pin_ethernet_task_to_core_v4.2' into 'release/v4.2'
...
ethernet: support pin emac task to core (v4.2)
See merge request espressif/esp-idf!9036
2020-06-08 13:52:01 +08:00
morris
b16c20fa30
ethernet: support pin emac task to core
2020-06-03 11:06:41 +08:00
lly
5b256c1cb5
ble_mesh: Add nvs operations for examples
...
- Store onoff_client example proper mesh info
- Store vendor_client example proper mesh info
Closes https://github.com/espressif/esp-idf/issues/5359
2020-06-02 14:02:54 +08:00
lly
c906bcaf40
ble_mesh: Add mesh example common nvs operations
2020-06-02 14:02:54 +08:00
lly
6bc4f5802d
ble_mesh: Define a macro for invalid company id
2020-06-01 09:10:17 +08:00
David Čermák
e1ec6c86e6
Merge branch 'bugfix/icmp_echo_ci_ttl_fail' into 'master'
...
ICMP echo: example test were failing due to regex not matching TTL
See merge request espressif/esp-idf!8931
2020-05-28 13:31:30 +08:00
Jiang Jiang Jian
b1cb127e61
Merge branch 'bugfix/esp32s2_iperf_config_update' into 'master'
...
update esp32s2 iperf config
See merge request espressif/esp-idf!8461
2020-05-27 13:56:19 +08:00
Marius Vikhammer
26d59f0f4c
ICMP echo: example test were failing due to regex not matching TTL
2020-05-27 11:16:18 +08:00
David Čermák
ea78d06939
Merge branch 'bugfix/example_common_connect_no_ip6' into 'master'
...
examples: common connect: fix build error if ipv6 disabled
See merge request espressif/esp-idf!8877
2020-05-25 17:23:52 +08:00
Michael (XIAO Xufeng)
b3587ff88c
Merge branch 'bugfix/fix_i2s_comm_format_unclear_description_bug' into 'master'
...
Bugfix(I2S): Fix i2s_comm_format_t configuration parameter does not match the TRM bug
Closes IDFGH-3040, IDFGH-2913, IDFGH-578, IDFGH-2408, and IDFGH-3117
See merge request espressif/esp-idf!8339
2020-05-25 15:00:10 +08:00
David Cermak
5c6bca69a5
examples: common connect: fix build error if ipv6 disabled
...
Declaration of local variable esp_ip6_addr_t ip6[]; was active even if IPV6 disabled in sdkconfig. Introduced in 06711c7c36
2020-05-22 08:45:59 +00:00
Mahavir Jain
6272cb842f
Merge branch 'feature/esp_wroom32_se_example' into 'master'
...
Feature/esp wroom32 se example
See merge request espressif/esp-idf!8552
2020-05-21 19:51:19 +08:00
Aditya Patwardhan
423e600d46
secure_element: atecc608_ecdsa example
...
* Replaced crypotoauthlib with esp-cryptoauthlib
* Added menuconfig option for esp-tls about using HSM
* Added error codes for HSM in esp-tls,
* Added support to select different type of ATECC608A chips
* Added README, updated docs
* tcp_transport: Added option to enable secure_element for ssl
Closes https://github.com/espressif/esp-idf/issues/4432
2020-05-21 13:08:30 +05:30
Island
fbf2088fc8
Merge branch 'example/ble_mesh_structural_adjust' into 'master'
...
Example/ble mesh structural adjustment
Closes BLEMESH-200
See merge request espressif/esp-idf!8719
2020-05-21 15:11:23 +08:00
Anton Maklakov
e1262aa68e
Merge branch 'bugfix/gh_action_pass_IDF_PATH_to_pylint' into 'master'
...
gh_action: fix python lint
Closes IDF-1538 and IDFGH-3341
See merge request espressif/esp-idf!8812
2020-05-21 10:15:35 +08:00
Bryan Hunt
4553f6c95d
Add cryptoauthlib as a component with mbedtls integration
...
* Add options to mbedtls for hardware acceleration
* Disable mbedtls EC curves if hardware acceleration is selected
since the hardware will have to define the curves supported
* Add a hardware ecdsa example
2020-05-20 22:52:37 +05:30
lly
2b767ef104
ble_mesh: Fix tutorial links in examples README.md
2020-05-20 11:33:46 +00:00
lly
3209336f6b
ble_mesh: Rename esp_fast_prov_* to ble_mesh_fast_prov_*
2020-05-20 11:33:46 +00:00
lly
88eb4a0820
ble_mesh: Rename the folders ble_mesh_fast_prov_* to fast_prov_*
2020-05-20 11:33:46 +00:00
lly
861816c353
ble_mesh: Rename ble mesh example main & init files
...
- Rename ble_mesh_demo_main.c to main.c
- Rename ble_mesh_demo_init.* to ble_mesh_example_init.*
2020-05-20 11:33:46 +00:00
lly
68fd967934
ble_mesh: Move the example init to the common_components
2020-05-20 11:33:46 +00:00
lly
a2a952aa55
ble_mesh: Move the button component to common_components
2020-05-20 11:33:46 +00:00
lly
5598620f6c
ble_mesh: Change the EXTRA_COMPONENT_DIRS used by examples
2020-05-20 11:33:46 +00:00
lly
db67e2d35c
ble_mesh: Rename common_vendor_models to common_components
...
Since the scripts of CI will bypass common_components when
trying to get ALL_EXAMPLES, and these BLE Mesh components
will only be used by other mesh examples, i.e. no need to
be compiled as a single example, so we rename the folder
to common_componnets.
2020-05-20 11:33:46 +00:00
Mahavir Jain
5f5bf9e5ee
Merge branch 'bugfix/allow_buffering_on_stdout' into 'master'
...
protocol_examples_common: keep buffering enabled on stdout
See merge request espressif/esp-idf!8793
2020-05-20 10:51:29 +08:00
Mahavir Jain
ed05dd7713
Merge branch 'bugfix/coap_component_build_issue' into 'master'
...
coap: move mbedTLS config options from component to examples
See merge request espressif/esp-idf!8707
2020-05-20 10:51:06 +08:00
morris
d003f96a9d
gh_action: fix python lint
2020-05-20 10:50:10 +08:00
Ivan Grokhotkov
60437e8ae4
Merge branch 'feature/protocols_example_tests' into 'master'
...
Add protocol example tests
Closes IDF-1157
See merge request espressif/esp-idf!8645
2020-05-20 02:05:26 +08:00
Mahavir Jain
7dbf01afad
coap: move mbedTLS config options from component to examples
...
CoAP component relies on some mbedTLS crypto configuration
options, e.g. DTLS and PSK. These configuration options if
selected, have footprint impact on generic TLS examples like
https_request or https_ota as well.
Footprint of https_request example with/without change is per below:
$ ./tools/idf_size.py new_https_request.map --diff old_https_request.map
<CURRENT> MAP file: new_https_request.map
<REFERENCE> MAP file: old_https_request.map
Difference is counted as <CURRENT> - <REFERENCE>, i.e. a positive number means that <CURRENT> is larger.
Total sizes of <CURRENT>: <REFERENCE> Difference
DRAM .data size: 14796 bytes 14796
DRAM .bss size: 23560 bytes 23680 -120
Used static DRAM: 38356 bytes ( 142380 available, 21.2% used) 38476 -120 ( +120 available, +0 total)
Used static IRAM: 89045 bytes ( 42027 available, 67.9% used) 89045 ( +0 available, +0 total)
Flash code: 554231 bytes 563823 -9592
Flash rodata: 179000 bytes 181224 -2224
Total image size:~ 860632 bytes (.bin may be padded larger) 872568 -11936
This commit moves relevant config options to CoAP specific examples
and also adds some run time warnings if they are kept disabled.
Closes https://github.com/espressif/esp-idf/issues/5262
2020-05-19 17:23:29 +05:30
Anton Maklakov
d6a6ac4d2d
Merge branch 'bugfix/mdns_example_test_graceful_fail' into 'master'
...
mdns-example: fail gracefully if mdns response not received within timeout
See merge request espressif/esp-idf!8774
2020-05-19 19:21:53 +08:00
Roland Dobai
5f024e1cd4
Add protocol example tests
2020-05-19 12:17:32 +02:00
Jiang Jiang Jian
ce507da514
Merge branch 'bugfix/mesh_manual_networking_example' into 'master'
...
example: fix mesh manual networking example
See merge request espressif/esp-idf!6869
2020-05-19 14:05:51 +08:00
Mahavir Jain
c7be363af9
Merge branch 'bugfix/http_client_example' into 'master'
...
Add note regarding use of URL and configuration parameters in http client
Closes IDFGH-3161
See merge request espressif/esp-idf!8791
2020-05-18 20:59:03 +08:00